Clamping force tester (27945)

Prema max.Druck 100 MPa

Condition: used, Technical details: x-axis: 120 mm z-axis: 610 mm diameter: - mm measuring range Y-axis: Höhe: 0 - 610 mm weight: 19 kg interface: 2xRS-232C, 2xUSB-A/B total height: 950 mm measuring system resolution capability: 0,0001 mm power consumption: 43 Watt Floor Space WxD: 320 x 330 x H: 950 mm High-precision height measuring * Hnjdpowa A Hmofx Agmon

Condition: new, swing diameter: 400turning length: 1000speed range: 70 - 2.000 min¯¹weight approx.: 500 Hnjded Eaukspfx Agmsn

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE MAX ROTATING DIAMETER: 660 mm MAX TURNING LENGTH: 1495 mm MAX TURNING DIAMETER: 660 mm BAR CAPACITY: 65 - 65 mm SPINDLE: 35-5000 rpm; 22 kW; 254 mm COUNTER SPINDLE: 35-5000 rpm; 18,5 kW; 254 mm HEAD: CAPTO C6 ; -30°+195° ; 15-12000 rpm; 18,5 kW X-AXIS TRAVEL: 580 mm X2-AXIS TRAVEL: 150 mm Y-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 1545 mm Z2-AXIS TRAVEL: 1490 mm B-AXIS TRAVEL: 1550 mm Hnedpoyy Thzofx Agmsn RAPID FEEDS X-Y-Z: 38 - 26 - 38 m/min TURRET HEAD: 9 POS TOOL MAGAZINE: CHAIN-TYPE ; 80 POS HIGH PRESSURE COOLANT: 18 Bar CONTROL UNIT: MAZATROL MATRIX WEIGHT: 11800 Kg OVERALL DIMENSIONS: 5090 x 3270 x 2830 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER

Condition: good (used), Description: The machine is in good technical condition, with the possibility of testing by prior arrangement. Maximum turning diameter: 660 mm Maximum swung diameter: 660 mm Main spindle: - Speed range: 35–5,000 rpm - Main drive power: 22/15 kW - Maximum torque: 349 Nm - Spindle bore: 76 mm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Sub spindle: - Speed range: 35–5,000 rpm - Power (10 min/continuous): 18.5/15 kW - Maximum torque: 326 Nm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Coolant tank capacity: 300 l Machine power supply: 66 kVA Operating voltage: 400 V / 50 Hz Air pressure: 5 bar, 500 l/min Control system: MAZATROL Fusion 640 MT Flush cooling: - Pump capacity: 20 l/min - Pump pressure: 5 bar Accessories: - Technical documentation - Chip conveyor with coolant Hnedpjy Amqzefx Agmjn - Tool magazine for 20 tools - B axis (positioned at 0.001° increments) - C and Y axes - Sub spindle angular position indexing - Synchronization of main and sub spindle - Tool presetting system (Tool Eye) - Front door locking - 20-position tool magazine - Complete cooling system - Interface for IC memory card

Year of construction: 2021, condition: new, Retrofit kit 2-axis digital display consisting of: FAGOR digital display with scales in Y- and Z-axis. Suitable scale holders f. HF50 Bracket for mounting the display behind the machine (see picture) Hnodpfx Agohcn Efsmen

Year of construction: 2015, condition: ready for operation (used), Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. Hodpfop S Sq Dsx Agmjnn

Condition: used, Year of construction: 2012, turning diameter 203 mm turning length 300 mm control Mazatrol Smart Distance spindle end - turret 99-434 mm max. turning diameter 280 mm bar material dia. 51 mm travel -x axis 200 mm travel -z axis 340 mm spindle turning speed range 35 - 6000 U/min rapid traverse X-axis 33 m/min rapid traverse Z-axis 36 m/min spindle bore 61 mm Tool turret 12 -fach turning tool - shaft cross cut 20 Boring bar- Ø 32 mm workpiece weight 150 kg spindle nose A2-5 taper in tailstock-quill MK4 Travel- tailstock 350 mm total power requirement 16,3 kW Hnsdpfeynbd Ejx Agmen weight of the machine ca. 3,5 t dimensions of the machine ca. 1,9 x 1,6 x 1,8 m Special accessories: Autom Tool Eye Spindle orientation Signal light Additional coolant nozzles above the chuck Automatic switch-off Interface for bar feed Automatic parts catcher Ø 51 x L:100 x 2.5 kg Workpiece conveyor for automatic parts catcher with workpiece tray Chip conveyor, side ejection Includes: Automatic short bar loading magazine LNS QUICK LOAD SERVO 80_S2 Diameter range: 6 - 80 mm round and hexagonal material Bar lengths: 350 - 1600 mm, however max. headstock length /UVV Weight max. 67 kg / bar Burr-free bars or bar sections Depth 600 mm for holding bars Input voltages from 200 – 460 volts / operating voltage 24 V DC, LNS control programmed on SIEMENS STEP 7 PLC, flexible control panel with large screen, user guidance via symbols for easy operation and adjustment. Device cover with 2 viewing windows made of Plexiglas.

Condition: good (used), machine/vehicle number: 125565-01, Year of construction: 2012, Offer 25501 Self-supporting – mobile / relocatable - column slewing crane Technical data (approx.): Hnodpfoyf A Rbex Agmon - Load capacity: 500 kg - Electric chain hoist DEMAG DC–ComA 5, year 2020 - Lifting speeds: 4.5 + 1.1 m/min - Jib reach: approx. 2000 mm - Crane girder IPE 180 - Hook height: approx. 2400 mm - Slewing radius: 360° - Undercarriage beneath base for moving the entire crane - Total height: approx. 3100 mm - Base footprint (pillar / base): approx. 1050 x 1050 mm - Overall length: approx. 2600 mm - Dimensions with undercarriage: approx. 1400 x 1050 mm - Total weight: approx. 3500 kg

Condition: new, 8 St. range L-W-H 710 x 510 x 900 mm weight 67 kg Hedpfxevblhqs Agmonn Schubladen schrank mit 8 Schubladen Schubladenabmessung 600 x 435mm Schubladenhöhe: Lade 1 - 8, 81mm

Condition: used, Electric trolley, electric trolley for chain hoist, crane trolley, trolley, rolling trolley For double T-beam STEEL type GU-A035400 . 0104671 Year of construction 1986 Load capacity approx. 1100 kg Roller diameter approx. 80 mm track width from 65 mm to 110 mm driving speed 12,5 m/min Motor power 0,42 kW Mains connection 380 Volt, 50 Hz. weight 20 kg good condition Hnedpfxjl Ab Rte Agmen