Used Swing Clamp for sale (11,567)

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed General information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Crodpfxjzii A Dj Aiiji Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), Schon 8 LES hydraulic swing-arm clicker press The machine is in excellent condition and ready for operation. Ideally suited for die-cutting challenging materials; widely used in the leather goods and printing industries. Compatible with both leatherworking and bookbinding/printing dies. Capable of cutting paper, cardboard, leather, plastics, etc. Pressing force: 22 tons Codpfx Ajz S Uxheiieri Power supply: 380V Table dimensions: 900 mm x 450 mm Head (striking plate) dimensions: 550 mm x 450 mm Maximum stroke: 150 mm Weight: 1200 kg Two-hand control or foot pedal operation. Equipped with an additional safety guard.

Condition: good (used), Italdibipack Swing 4255 Shrink wrapping machine The machine is in full working order, ready for production, and in very good condition. The photos show the actual product being sold. Made in Italy. Description: The „Swing” series of L-sealer shrink wrapping machines is characterized by a compact design, allowing them to occupy less space than other similar systems available on the market. Codpfez S Ulhsx Aiijri Technical specifications: Sealing bar dimensions: 420 × 550 mm Max. product height: 230 mm Power supply: 230V

Condition: excellent (used), Year of construction: 2003, Equipment: documentation/manual, safety light barrier, Triag clamping cubes for 500x500 pallets Cedpfoz A Ab Dox Aiiori

Condition: good (used), Year of construction: 2015, Offer 26282 Clamping, alignment, and welding table with T-slots and cast iron rails Technical data: - Length 3000 mm - Width 1500 mm - Table height 835 mm - Max. point load (with adjustable feet) 1500 kg - Grid engraving 100 x 100 mm - Distance between axes 100 mm Cjde Ah Rp Hepfx Aiijri - Weight approx. 600 kg

Condition: good (used), Year of construction: 2016, 1 used 4-station clamping tower Manufacturer: ALLMATIC Number of clamping devices: 4 Clamping device: ALLMATIC NC machine vises Jaw width: 125 mm Clamping system: Mechanical NC clamping system Application: CNC milling machines and machining centers Suitable for multiple clamping and series production Special advantages Four-fold clamping for high productivity Csdpo Ah Dyrsfx Aiiori Optimal utilization of the machine work area Reduction of setup and downtime Robust and high-quality ALLMATIC design Ideal for single-part and series production Flexible workpiece clamping for various machining tasks Scope of delivery 1 × ALLMATIC 4-station clamping tower 4 × ALLMATIC NC vises, jaw width 125 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Welding table with clamping system Manufacturer: Siegmund Large format: 3000 x 1500 mm with clamping system and trolley Csdpe Ahm Sqjfx Aiieri

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200067, type of input current: three-phase, overall weight: 445 kg, input voltage: 380 V, input frequency: 50 Hz, power: 1.1 kW (1.50 HP), We offer this used Omec SBM1200 Manual hydraulic clamp, year of construction 2020. Construction year: 2020 Power: 1.1 kW Voltage: 380 V Cedj Afn Eaopfx Aiijri Frequency: 50 Hz Weight: 445 kg Phases: 3 phases If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, mount diameter: 38 mm, clamping range: 38 mm, Reishauer clamping device, base unit, basic chuck FK 38 suitable for Reishauer gear grinding machine, fits on the spindle for grinding machines RZ 150 / RZ160 / RZ 260 clamping diameter 38 mm for n max. = 3,000 rpm balanced with clamping stroke control / 3-point support control and media feed for additional functions: clamping / air system control / clamping stroke monitoring incl. assembly and operating instructions, as well as Reishauer wooden transport container as new – hardly used, from our stock 2 units available Price negotiable Our asking price is € 3,990.00 net ex works, plus packaging costs All technical specifications are subject to printing errors and changes. Crjdpfx Aiswzkcxoioi We only sell to countries within the European Community.

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, We are selling a plate gripper that we only used once, but it did not meet our requirements. Csdo Agu Swspfx Aiijri The device is in new condition.

Condition: used, Gamal Door Clamp with Loading Treppel Credpfx Ais Ahgnajiji

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, J. Neu Piccolo EP 150 oscillating panel saw, manufactured in 2021, in like-new condition. The original saw blade is still installed, and the saw has been used for a maximum of 20 hours. Therefore, it is in very good condition! Equipped with infeed and outfeed roller conveyors: 600 cm each. Power: 3.7 kW Saw blade: max. 500 mm (30 mm bore) Cutting height: 150 mm Optionally, a matching dust extraction unit from Holzkraft RLA 140 (manufactured in 2023) can also be purchased (see last picture). The machine can, of course, be inspected while powered on and thoroughly tested. The sale is to business customers only and excludes any warranty for defects. No guarantee, warranty, or right of return. Cedpfx Aioz It Ewsieri

Condition: like new (used), Year of construction: 2005, functionality: fully functional, Müller Martini Corona, (~2005), complete clamping unit, for a machine with a maximum speed of 18,000 units/hour. - Part numbers: 3010 1011 9 and 3010 1013.9 The entire clamping unit is available for sale as a spare part. Codpfjz Au I Eex Aiiori

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, overall weight: 300 kg, LANG Clamping Tower 70850 with Grid Plates 75710 and Arbor Clamps 48155-125 2 towers with plates and arbor clamps are available! We offer a high-quality LANG Clamping Tower 70850 with matching Grid Plates 75710 and Arbor Clamps 48155-125. This clamping system is ideally suited for precise and efficient 5-axis machining as well as multi-sided machining on CNC machining centers. Technical data: Manufacturer: LANG Technik Type: Clamping Tower 70850 Accessories: 8 x Grid Plate 75710 Clamping system with grid hole pattern High repeatability Robust design for industrial use Ideal for automated manufacturing and setup time optimization Condition: Used, technically perfect. Normal signs of wear and tear consistent with age and use. Scope of delivery: 1 x LANG Clamping Tower 70850 8 x LANG Grid Plates 75710 Cedjztzi Rspfx Aiijri 4 x Arbor Clamps 48155-125 The clamping tower enables optimal use of the machine's working area and increases productivity by machining multiple workpieces in a single setup. Inspection possible by appointment. Shipping or collection by arrangement.

Condition: good (used), Year of construction: 2014, Cutting range examples: Csdpfxezrmk Rs Aiisri at 90° 260mm round 300x260mm rectangle at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of hydraulic lifting of the saw frame.

Condition: like new (used), functionality: fully functional, Clamping elements Dimensions, W x D approx. 100 x 150 mm Overall height 91.5 mm Jaw width 30 mm Lowest support height on jaws 68.5 mm Middle support height 80 mm Clamping height per jaw approx. 11.5 mm Credsz Td A Espfx Aiiji Jaw clamping travel approx. 25 mm

Condition: used, Hydraulic machine vise, high-pressure clamping device RÖHM - DECKEL, type RB 160 Hydraulic vise, clamping device Jaw width: 160 mm Jaw height: 49 mm Clamping force: 5 tons Clamping range: 0 to 300 mm Opening width: max. 308 mm Clamping range: approx. 100 mm (per step) Guide rail height: 118 mm - Clamping force adjustable in 4 steps - 3 clamping ranges adjustable via locking pins - Rotating plate with degree scale Crjde Agw D Uopfx Aiisi Dimensions L x W x H: 570 x 350 x 167 mm Weight: 76 kg Very good condition

Condition: excellent (used), Year of construction: 2010, 1. Clamping table, square design, manufactured by AMF, dimensions 600 x 1060 mm, year of manufacture 2010. Width 600 mm, height 1060 mm (4 sides). Base plate: 760 mm x 735 mm x 50 mm. Grid hole spacing: 50 mm x 50 mm, thread: M16. New price: €12,000. Crodpfx Aoz N S Egsiiji In very good condition.

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 1,400 kg, Bale clamp ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Crjdpfx Aioz Nt Uisiji Description: ISO 2A (41 cm) Capacity 1400 kg Opening range 565-1900 mm Width 1050 mm Clamps 770 mm ID OS2112

Condition: used, Year of construction: 2012, machine/vehicle number: DCM-Pro 1-125 1/1 H2,8 V16/4, overall weight: 240 kg, load capacity: 125 kg, Used Demag slewing jib from the KBK/KBK-AL system with KBK I 3M-1 jib profile. The existing jib has an outreach of approximately 3,000 mm and is designed for manual slewing. A crane column is not part of this system; the jib with slewing bearing mount is included. The system is equipped with a Demag DCM-Pro 1-125 1/1 H2.8 V16/4 electric chain hoist, manufactured in 2012, with a lifting capacity of 125 kg and a lifting height of 2.8 m. The hoist features lifting speeds of 4.0 and 16.0 m/min and is FEM class 4m / ISO class M7. Condition: used, stored disassembled. Cedpfx Aio Agxd Aoiori

Condition: used, Hydromechanical, NC machine vice, VIS - HYDRAULIQUE Precision machine vice, spanner Type 20700 Year of manufacture: approx. 2000 Jaw width: 150 mm Crodpj Agw Dxefx Aiiei Jaw height: 42 mm Clamping range: 0 to 250 mm Opening width: max. 253 mm Clamping force: 6 tons Guide rail height: 51 mm Guide rail length: 450 mm - Hydromechanical machine vice - Quick adjustment with clamping ball locking in a hole grid, 8-fold - Sturdy base body, ground on all sides - Can be mounted horizontally, vertically or laterally - Guide rail with 15 mm and 19 mm guide groove Dimensions L x W x H: 480 x 150 x 107 mm Weight: 31.5 kg Good condition

Condition: good (used), Press brake with a working length of up to 6.2 m Suitable for sheet metal up to 1.25 mm thickness With rear manual back gauge With roller cutter With Knauf profile head Crjdpfxs Afw U Rs Aiioi

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-275.0335 / L-288.0125, total length: 6,000 mm, total height: 3,800 mm, overall weight: 350 kg, Bystronic Swivel Crane with Suction Device Bystronic Swivel Crane - Model: SSK2 - Year: 2015 - Height: 3800 mm - Arm Length: 6000 mm - Load Capacity: 500 kg Bystronic Suction Device Credpsz Dphgefx Aiiei - Model: EK 250 - Year: 2015 - Load Capacity: 250 kg - Weight: 80 kg - Pneumatically operated - 90° Tilting Disassembly and installation can be performed by our service team upon request. Immediately available.

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings - drawings of various clamping positions The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Technical data - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm - Locking air: present - Maximum locking air pressure: 5 bar - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories Cjdpfxjzx D A Dj Aiieri The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging

Condition: used, Year of construction: 1973, Storage location: Nattheim Credovvkt Uspfx Aiisi