Used Clamping Table for sale (42,651)

Year of construction: 1980, condition: good (used), Movable clamping table make WAGNER type: FE4000 year 1980 Travel : 4 000 mm table surface : 4000 mm X 1400 mm Feed rate : 8 - 2500 mm/min Dledpfx Asg Uf I Aob Toa Rapid traverse : 4 m/min load capacity. Max : 12 500 kg Weight : approx. 12 000 kg In good condition. Hydr.clamping and worm drive

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot Djdpfexy Stysx Ab Tsla - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: good (used), functionality: fully functional, Console base, head adjustable by 600 mm Drilling capacity 40 mm 2 speed ranges, stepless 60 – 1600 rpm 3 feeds 0.1 / 0.16 / 0.25 mm/rev Dledpfxex Avike Ab Tsa Taper MK 4 Throat approx. 330 mm Quill stroke 220 mm Weight estimated at 1 t (Shown here as sample: 1-axis table with 250 mm cross travel, clamping surface 600 x 240 mm)

Condition: good (used), Year of construction: 2010, machine/vehicle number: 25438, Offer 25438 Technical Data: - Length 3000 mm - Width 1500 mm - Plate height 200 mm - Hole diameter approx. 28 mm - Hole spacing (center-to-center) approx. 100 mm - Weight approx. 1000 kg Dlodpfxoxz Axpj Ab Toa

Condition: used, Year of construction: 1992, table length 1 mm table width 1 mm table load 1 t round table plate Ø 600 mm with 3 t-slots (18/30), Slot-distance: 160 mm, with Dsdpsu Sbc Nofx Ab Tsla misc. clamping plates and clamping pot!

Condition: used, Technical details: table length: 1400 mm table width: 1400 mm table height: 740 mm Dlsdpfsvb Ddkjx Ab Tja weight of the machine ca.: 1 t

Condition: used, Year of construction: 1970, table length 2200 mm table width 115 mm table load 600 t Dedpfxeudc Two Ab Tela weight 3 t 2

Condition: used, Used Bode - T-slot clamping table Length x Width x Height = 6500 x 1500 x 300 mm The table has a small damage at the end (see photos) Djdpfxjxqpf Uj Ab Tsla

Year of construction: 1989, condition: used, Technical details: table length: - mm table width: - mm table load: - t Dlsdpfx Abou N D R Dj Tja total power requirement: - kw weight of the machine ca.: 8,0 t dimension working table: ca.4,5x3,1x1,2 m TRANSFER TABLE - TRANSFER TROLLEY - TOOL CHANGING SYSTEM Possible application: for press tools/devices as interchangeable trolleys in press lines *

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm side-clamping surface: 200 (Höhe) mm weight 1517 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Dsdpfxsxaa Nvj Ab Tela The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment

Condition: used, 2 clamping plates, 1 pair of clamping bars with T-slots Clamping block, press table, auxiliary table with T-slots Length of each clamping bar: 900 mm Width of each clamping bar: 295 mm Dlsdsxf Uwlepfx Ab Tea Thickness of each clamping bar: 130 mm - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) - All faces machined Net weight per clamping bar: 240 kg Good condition

Condition: good (used), Very stable cast iron clamping table with 7 T-slots Dimensions : 1000 x 1000 x 840 mm Thickness of the cast plate incl. ribbing at the bottom approx. 130 mm Was probably originally a machine table T-slots: opening width at top approx. 25 mm Groove width at bottom approx. 43 mm Sturdy substructure with doors and two shelves Djdpfx Aboxnqxks Tjla Condition : Surface hardly damaged ! Grooves not broken out

Condition: new, table length 900 mm table width 600 mm table height 700 mm groove width mm mm weight of the machine ca. 90 Kg Dledpfx Asupxmfsb Tsa dimensions 0,9 x 0,6 x 0,7 m

Condition: good (used), Used Bode - T-slot clamping table Djdjxqpctepfx Ab Tsla Length x Width x Height = 4000 x 1500 x 200 mm

Condition: used, Year of construction: 1989, Technical details: table length: 1600 mm table width: 920 mm height over floor: 200 mm weight of the machine ca.: 0,69 t Clamping table with 4x through holes Ø 22 mm Material cast steel T-slot according to DIN 650: T-slot spacing 250mm T-slot outer spacing (right and left) 120 mm a=22; h=38.5; b=40; c=18 mm T-slot length = 1380 mm Dljdpju N Ebqsfx Ab Tea *

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items available! !! SPECIAL OFFER !! SIEGMUND Welding Table Retro 2400x1200x200 incl. accessories Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole Ø 28 mm Dlodpfsxflftjx Ab Toa - Holes surface 100x100 mm grid - Corners, edges, and holes rounded - Side panel height 200 mm - Side panel holes in diagonal grid - Construction reinforced with ribs - Grid lines enable precise assembly The welding tables are equipped with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Features: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version with scale - Includes 4x feet Basic equipment - Includes accessory set (see image 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999

Condition: used, Clamping plate, machine table with T-slots made of steel Clamping table Clamping plate, clamping table, machine table HOMEMADE can also be used as a straightening plate or welding table Table surface: 2150 x 1040 mm Construction height: 200 mm - Top and bottom sides machined in parallel, surfaces planed Dsdpfx Ajtqgnyjb Tsla - Table plate L x W x H = 2150 x 1040 x 65 mm - Table plate provided with several symmetrical bores Table plate with M16 and M24 threaded holes, M16, M24, M16, M24, etc. Bore spacing lengthwise: approx. 250 mm Bore spacing crosswise: approx. 255 / 165 / 255 mm - 6 pieces double T-beams welded onto the steel plate Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm Clearance between double T-beams: 50 to 55 mm Weight: 1730 kg Good condition

Condition: good (used), Clamping table, T-slot table, milling machine table, drilling machine table, boring machine table -Clamping table: drilling machine table -Table surface: 480 x 330 mm -Bore: Ø 48 mm bolt circle Ø 108 x 13 mm -Groove width: 13 mm -Dimensions: see photo Dedpfjt H Tqtsx Ab Tsla -Dimensions total: 540/550/H70 mm -Weight: 30 kg

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 100 mm weight 354 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided version with scale - Including 4x basic equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle Djdpoxabqhefx Ab Tsla + 2x 160162.N angle + 1x 160134 + 36.N bracket + 1x 163999 accessory set

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 200 mm weight 1374 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes Djdpfxjxabiwj Ab Tjla - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - incl. 6x base equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 753 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface Dodpfsxabc Dox Ab Tsla - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 8x basic equipment

Condition: new, table length 1200 mm table width 800 mm weight 153 kg With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Working height between approx. 700 and 1,000 mm Dodpsxabbaofx Ab Tola including 16 hole plate: - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 16 mm - Holes surface 50x50 mm grid - Material thickness 12 mm

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 949 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Item No.: 7D.1 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm Dlsdpoxaayzofx Ab Tea - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Drilling surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The welding tables are provided with a scale as standard. Plasma nitrided version : - Protection from rust/scratches/weld spatter adhesion - more corrosion resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - plasma nitrated extreme version with scale - Side panel + table top with diagonal grid - incl. 4x base equipment

Condition: new, table length 1200 mm table width 800 mm weight 177 kg With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Working height between approx. 700 and 1,000 mm For clamping on Premium Light with a clamping bolt if the spacer ring article no. 280653.N required. including 28 mm perforated plate (light): - Premium Light - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Material thickness 15 mm Dljdpfx Asxaayusb Tja

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Djdpfjxab Rnex Ab Tola Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment