Used Tension Clamp Assembly for sale (16,361)

Year of construction: 2002, condition: used, SECOND-HAND HYDRAULIC CLAMP WITH FOLDING BENCHES RODEA MOD. S - CE RULES Bjdowr A Stjpfx Ab Telr - Year 2002

Condition: good (used), Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder -Cable clamps: cable holder Bledpfswqnbwox Ab Tjr -Type: Round 16-25 mm -Number: 16x holders available -Price: per piece, minimum order 5 pieces -Dimensions: 50/50/63 mm -Weight: 0.1 kg/piece

Year of construction: 2024, condition: new, The flattest wooden frame construction table in the world = 3 cm! Delivery without wooden boards. Text line break with the following data: Included components: 1 double rail (zero stop) - 10 perforated rails - 10 rack and pinion clamps - 14 adjustable stop blocks - 14 interchangeable pressure plates outer wall - Battery impact screwdriver - Bit adapter - 50 MMS 10x70/5 dowel - Hammer drill 8x165 dimensions: Clamping length from 0 to 3.550 mm hole grid 140 mm with plate width 1.250 mm = table length 12.350 mm max. clamping force approx. 250 kg stroke length clamp 340 mm height of stop blocks 100/160 mm The frame building aid was developed in order to precise production of timber frame elements. elements. Special attention was paid to the space requirements and the price. Due to the extremely flat it is now possible to change the surface by removing the the space by removing the clamps and stops. used in a different way. This is not only for small, but for all but for all company sizes a special advantage. After creating a flat surface, the tensioning rails are rails are aligned and anchored to the anchored to the floor. The intermediate spaces are covered with a 30 mm thick wooden panel to be mounted on site. filled. The same plate can be used to attach ramps to the edges. can be attached to the edges with the same plate. The level created in this way level can also be driven on with heavy vehicles vehicles, or can be used as a storage area. Thus the place can be activated only if necessary for the timber frame construction. be activated. The steel parts are galvanized. The entire assembly takes place on site. After adjusting the T Blsdpfxsb Nrbne Ab Tor [...]

Year of construction: 2019, condition: ready for operation (used), A complete automation system for handling machining center products is available. 1) Full protection cabin with safety door. 2) 6-axis robot Kuka KR 120 R 3200 PA with gripper adapter. 3) 6-axis robot Kuka KR 120 R 3500 with gripper adapter. 4) 2x 6-axis robots Kuka KR 10 R 1420 with gripper. 5) Handling unit with 2 robots. 6) Reference chamber. 7) Marking station with extraction, cleaning station, and assembly unit for 2 lanes. 8) 2x adhesive application stations. 9) 2x screwing stations. 10) Drawer system with part inserts. 11) Pallet storage area. The transfer stations and removal/handling grippers are designed for specific parts. Documentation available. An on-site inspection is possible. Blsdpexaph Isfx Ab Tor

Condition: used, Year of construction: 2007, Assembly Bench – Rotox mod. VPAH 3023 Pressure: 6–7 bar Bljdoxam U Eepfx Ab Tjr Weight: 480 kg

Condition: not inspected (used), Assembly press manufacturer: Fonmar, pneumatic pressure system, resistance heating, cooling by water, compressor, coolant pump, control unit, transport trolley Bjdpfx Abow U R Dno Telr

Condition: used, TAYLOR HYDRAULIC ROTARY CLAMP - USED - Working length mm. 2400 - Working width mm. 800 - 20 sections - N. 3 pressers for each section Bodpfowrm S Dex Ab Tolr

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper Blsdpfeb Tmrvsx Ab Tsr 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, total width: 910 mm, total length: 2,720 mm, workpiece length (max.): 310 mm, workpiece width (max.): 320 mm, workpiece height (max.): 50 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Formats and dimensions Book format min.: 135 x 115 mm Book format max.: 320 x 310 mm Cover format min.: 240 x 135 mm Cover format max.: 660 x 320 mm Book thickness min.: 1 mm Book thickness max.: 50 mm Cover weight: 90 – 300 g/m² Maximum cover stack height: 70 mm Bsdpfow Ifmdox Ab Tslr Performance Production speed: up to 500 cycles/h MACHINE DETAILS Power supply: 400 V, 50 Hz – 2.7 kW Dimensions & weight Dimensions: 2,720 x 910 x 1,545 mm Weight: 900 kg EQUIPMENT Fully automatic settings Touchscreen

Condition: used, Handling Device, Handling System JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm with screw clamp - Movable in three axes (horizontal, vertical, rotatable) - KÜBLER rotary encoder for rotation, type 8.5873.5320.B311.S003 Blodpfx Abofgpfms Tjr - BALLUFF linear transducer for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - For weightless suspension of small devices - Stepwise adjustable load capacity - Constant pulling force Required space (L x W x H): 770 x 310 x 1200 mm Dead weight: 19 kg Good condition

Condition: used, Connect Four – The Success Building Blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions WE OFFER KAUP Hydraulic Bale Clamp for Forklifts For the transport and handling of bales made of various materials. This attachment replaces standard forks and is specifically designed to securely grip, transport, and if necessary compress bales without pallets. Manufacturer: KAUP Type: 1.5T 413 Blodowvizvspfx Ab Ter No.: 068007 Load capacity: 1,400 kg Hydraulic pressure: 200 bar Dead weight: 420 kg Projection: 133 mm Load center distance: 285 mm This is a used item. DESIGN & PROJECT PLANNING Our sales team will gladly prepare a non-binding, customized quotation for you. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the equipment. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per unit/net price or as indicated in the description text (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US The DLK company in Nordhorn deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive terms. Please do not hesitate to contact us if you have any questions.

Year of construction: 2008, condition: used, Equipment for fitting assembly 1 FAA S3 for folding, opening and opening and folding fittings for wooden and PVC casements in automatic design, working procedure from left to right - automatic clamping and positioning sash - automatically travelling screwdriver with automatic screw feed, servo-driven, working in X and Y axis - preparatory assembly table fitted with slide rails, dimensions 1,300 x 3,000 mm, including ten automatically recessed wing stops, servo-driven travelling stop for hardware cutting with PC control - Grid rack for fittings - 33 compartments, including PC compartment - PC control, floppy drive, Windows NT Wing transport device 1 for automatic wing feed for the second screwdriving cycle Device 1 for automatic height adjustment of the travelling screwdriver via PC. Device for manipulation of scissor fittings 1 for closing and hooking open scissors Bledjw Tcu Nopfx Ab Tjr Hand-held reading device 1 Automatic handing device/ 1 transfer of the forged wing to the next station ETHERNET network card 1 Number Machine name Pcs Item Automatically folding and feeding 1 table for removing the galvanised wing in horizontal position for subsequent transport and storage in vertical position into the appropriate shelving rack, for sash dimensions with a width of 350 - 1.650 mm and a height of 350 - 2,500 mm, including cabinet switchboard and SPS control Servomotor landing gear 1 and servo controller for travel of the tilting table, sorting trolley, including drive unit, max. speed 65 m /min Rail tracks 7m made of thick-walled U-profiles for roller bogies with toothed shaft for running a tiltable table and sorting trolley Compartment rack (15 compartments) 3 with automatic wing insertion, compartment width 110 mm, compartment height drawer height 2.600 mm, depth of the shelf 1.100 mm, overall width of the rack 2.130 mm Display indicator 1 to display the relevant compartment shelf, including software equipment for sorting the leaves into appropriate compartments Protective fence 1 Entrance door for protective fence 1 with limit switch

Condition: excellent (used), H 6.11.10 Tool clamp Hirschmann Used, very good condition 3 pieces available For installation in C-axes. Connection for compressed air and flushing from above. The back of the clamp is ground parallel to the centering prism as an alignment surface. Bjdpfxsw E Hgue Ab Tslr Positioning and repeat accuracy:

Year of construction: 2007, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Bedjnvfduspfx Ab Tjlr

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total width: 1,685 mm, total length: 4,720 mm, total height: 1,660 mm, workpiece length (max.): 400 mm, workpiece width (max.): 280 mm, No reserve price – guaranteed sale to the highest bidder! 9-clamp perfect binder with a capacity of up to 4,000 books per hour! Fully automatic setup and operation for minimal changeover times and maximum efficiency! TECHNICAL DETAILS Formats and Capacities Number of clamps: 9 Book block thickness: 1 – 45 mm Max. book size: 400 x 280 mm (off-line), 330 x 250 mm (in-line) Min. book size: 148 x 105 mm Max. cover size: 400 x 660 mm Min. cover size: 135 x 220 mm Cover weight: 82–302 g/m² (uncoated), 105–348 g/m² (coated) Blsdpfsw Ifaqjx Ab Tjr Speed: up to 4,000 books/hr MACHINE DETAILS Adhesive: EVA and PUR hotmelt (interchangeable tanks) Power supply: 3-phase, 200 V, 50/60 Hz, 23/25 A Machine dimensions: approx. 4,720 x 1,685 x 1,660 mm EQUIPMENT 2 glue application rollers Automatic book thickness detection Flexible cover feeder

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Bsdpfjhalvdox Ab Tolr Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition

Condition: excellent (used), - Dimensions: 1006x595x1495 mm - Power supply type: Electric Blodpewyb T Eefx Ab Ter - Number of clamps: 3 - Smooth surface - Heating plates: 3 zones at the bottom, 2 at the top - Voltage: 400V - Power: 22 kW - Weight: 358 kg - Refurbished equipment: Equipment is prepared upon order; pickup and return times are agreed at that moment (please request price after refurbishment).

Condition: used, Year of construction: 1980, load capacity: 1,000 kg, Cardboard clamp ISO class: ISO class 2 = 1,000 - 2,500 kg Bljdpfx Ast S Ntueb Tsr Technical condition: good Description: ISO 2A (41 cm) Capacity 1000 kg Year 1980 Opening range 500-1680 mm Clamp length 1300 mm Clamp height 1200 mm Width 900 mm ID OS913

Condition: ready for operation (used), A vertical upward clamping jaw elevator and a vertical downward clamping jaw elevator in stainless steel design are available. This is a conveyor system for overcoming height differences in production lines. Bottles, jars, cans and also cartons etc. can be conveyed upwards and downwards. (1) Upward elevator, output: 14,000 cans/h (empty containers open), speed: 25m/min, format diameter: 100mm, format height: 50-80mm (400g), total length with infeed and outfeed section: 2500mm, frame width: 1050mm, infeed height: 900mm, outfeed height: 2600mm, height difference: 1700mm, drives: frequency-controllable, motor power: 1.1kW. (2) Downward elevator, output: 14,000 cans/h (empty cans open), speed: 25m/min, format diameter: 100mm, format height: 80mm (400g), total length with infeed and outfeed section: 2500mm, frame width: 1050mm, infeed height: 900mm, outfeed height: 2600mm, height difference: 1700mm, drives: frequency-controllable, motor power: 1.1kW. On-site inspection is possible, were completely overhauled in the past. Blodpfx Aeu Av Egeb Tjr

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing technology Type: Handy-flex 200 horizontal movement: 300 mm vertical movement: 370 mm Load capacity: 10 to 14 kg Projection: 250 to 550 mm guide column vertical: Ø 25 mm Guide columns horizontal: Ø 16 mm tool holder: Ø 26 mm oval with screw clamping - Movable in three axes (horizontal, vertical, rotary) - 1 piece Balancer for vertical movement TECHNA, type 9340, adjustment range 10 to 14 kg - adjustable latch for vertical movement, manual release via Bowden cable - for weightless suspension of small appliances - Load capacity adjustable - constant attraction Space requirement L x W x H: 880 x 500 x 1120 mm Own weight: 23 kg sound condition Blodpfxofx Hxze Ab Ter

Condition: used, Material clamp, material gripper, load clamp carrying clamp, lifting clamp, block tongs Manufacturer: NORDGREIF Type 7548 Year of construction: 1997 Load capacity: 500 kg Gripping width: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber protective coating on the gripping surfaces - for crane operation - with CE-marking Own weight: 50 kg Bledpfx Abjdz Spns Tor sound condition

Condition: used, Heavy-duty shunting trolley, heavy-duty transport trolley Assembly trolley, heavy-duty trolley DIRK PROKOP type 10001-4 Very stable special design Load capacity: 1800 kg Loading area: 2720 x 930 mm Load carrier length: 2720 mm Load carrier width: 140 mm Load carrier height: 135 mm Ground clearance under the load carrier: 100 mm Height of upper edge of load carrier from floor: 235 mm Ground clearance of heavy-duty castors: 15 mm - 2 load carriers made of double-T steel bolted to both sides of the trolleys - Load carriers can be easily separated from the trolley using locking bolts - Chassis with very sturdy swivel castors with central brake - Can be moved in all directions (lengthways, crossways, crab steering, etc.) - Load carriers can be driven under with a normal pallet truck to unlock the trolleys - Ideal for in-house transportation of switch cabinets or machine parts for assembly. - The parking brake device and the support blocks on the longitudinal beams can be easily removed. Overall length with trolleys: 3450 mm Width of the trolleys: 980 mm Bledpfxsrktlfo Ab Tsr Unladen weight: 350 kg Very good condition

Condition: used, Hydraulic machine vise ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 ton. Clamping range: 0 to 370 mm Opening: max 373 mm Guide rail height: 140 mm -2 socket pins adjustable clamping ranges -Swivel base Bljdpod Amwisfx Ab Tjr Dimensions L x W x H: 900 x 400 x 210 mm Weight: 125 kg good condition

Condition: used, Mobile jib crane, gantry crane, traveling crane AUSTEN type HVR 05 Serial no. 1808137 Year of construction 2019 Load capacity 500 kg Projection of load hook to foundation foot max. 650 mm Overall height 3025 mm Height to lower edge of crane crossbeam 2945 mm Height to crane suspension eye 2900 mm 2850 mm Travel distance of crane spreader beam 1250 mm Span of crane spreader beam 1145 mm (center roller - center roller) Internal distance between the supporting structure 1080 mm Foundation base plate with steel weight (painted blue) 1320 x 800 x 850 mm - Aluminum support structure, removable - Crane crossbeam can be rolled by hand on crane runners - The crane frame is set up without being connected to the ground and is self-supporting due to its high dead weight. - Steel base (painted blue) Width 1320 mm, depth 800 mm, height 850 mm - The base is made entirely of steel and has a dead weight of 800 kg - Mobile with pallet truck Own weight 800 kg Very good condition Price without lifting gear Bljdpsi Aqgtefx Ab Ter

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm Bljdpfx Ash U Dtueb Tjr - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition