Used Tensioning Washer for sale (3,350)

Condition: new, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fjdpfx Ajxur Sfsc Nofu • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Fodpfx Ajwt S Nkjc Nofu Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: new, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-800 • Type: Double Helix Screw Washer • Capacity: 80 ton per hour • Dimension: 1750 x 8650x1900 mm • Screw Size: Ø 800x8000 mm • Motor: 2 x 15 kW Heavy duty Gamak • Water Consumption: 65-230 m3 • Including chassis, motor and safety guards. Fjdpjwclabofx Ac Njfu FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Ffodpfswck N Ijx Ac Neu Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged.

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: Fodpfx Asq Nf S Rjc Nofu 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Ffedpfxoxp Urds Ac Nju Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Fedpfx Aexpxyrsc Njfu Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: good (used), IWT Utensil / Crate Washer Model 9LAV65 Year 2009 316 stainless steel throughout. Pull out twin racks, both are removable, dimensions of each rack 1400mm W x 900mm D 330mm between racks Total wash area 1400mm W x 760mm H Fodpewh A E Esfx Ac Nefu 3 dosing pumps - wash agent, detergent, rinse agent Also one mobile rack on castors for unloading of washed product on removable racks Heating source - hot water or steam Wash pump and rinse pump Digital control panel Stainless mesh screen filter in main wash area

Condition: used, Overall dimensions: 1720 x 1100 x 1600 mm Tank size: 1200 x 600 x 1400 mm Weight: 248 Kg Material: Acid resistant Ffodpfx Asi Arlhjc Neu It is equipped with a connection suitable for filling and draining (ball valve), and a pneumatic (electric) valve serves to aerate the tank.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Fsdpfx Ajfz Dvvjc Nsfu Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Ffedpfofz Ax Sex Ac Nju The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Fsdpfx Ajflpmqjc Nsfu ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Fodpfx Ajfzrapsc Nsfu ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Fodpfjfz A D Nox Ac Nsfu User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Unit 1 Unused and New Condition $20,000.00 USD Fedpfx Aev Dpy Nsc Njfu Unit 2 Used - Excellent Condition $16,000.00 USD

Condition: new, color: grey, Field of application: Mining Empty weight: 32.000 kg Dimensions (LxBxH): 2200 x 310 x 430 cm Tyre size on axle rear: 225 Tyre tread remainder on axle rear: 100% MOBILE SAND MAKER Feeding Hopper : 10 m3 Crusher Feeding Belt Conveyor 800*9000mm VSI700 Vertical Shaft Impact Crusher 132kw Vibrating Screen 2 Decks 1600x5000mm 11 kw Feedback conveyor 600*8000mm Stockpile Conveyors 600*8000mm Mobile Chassis 2 Axles-Compacible With EU Road Regulations Automation -PLC- with Tablet and PC Controlled Industrıal Paint on 1 Layer Linings-120-140 Micron- Barriers-Ladders-Platfroms Galvanised PLANT DETAIL Production Capacity 40-60 tph 0-5mm Maximum Feeding Size 50mm Feeding Height 3.8 meters Main Configuration VSI Crusher + Vibrating Screen Total Motor Power 165 kW Electric Generator Requirement 350 kVA Weight of the plant 31 Tonnes Sizes of the plant 14(L) x 3 (W) x 4.2(L) meters Chassis Type Single chassis on wheels Production Capacity 100-150 tph Maximum Feeding Size 50mm FEEDER PROPER FOR HEAVY DUTY Dimensions : 900x4100 mm Bunker : 15 m³ Capacity : 150 to 200 tons / hour Grid Length : 1160 mm Main Body Sheet : 20 mm. Weight : 5.5 tons. Number of springs : 111 ea Type of Bypass : Flat grid type (throttle transfer) Grill casting : 16-18 mn. 1,5 cr. Type of Bunker : With flat ramp climbing Anchorage slots : pin click - fit Bypass chute : With rear additional saddle 2-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Fedpfx Acjyh Hngj Nofu Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane Crusher Feeding Belt conveyor Rated sizes : 800 x 9000 mm Motor power : 7 kw 1500 d/d Power Transmission : Motorized Reducer Drive drum : 273 Vulcanized Rubber Coating Tail drum : Angle process over pipe Body Construction : Sheet Metal Body Rubber Tension System : SNH type sliding bedding Carrier : triplet assembly pedestal Group of turning roll : single hanger system Type of reducer : İ-MAK reducer Band rubber : 5 layers of 10 mm EP-125 eksaş conveyor Drive bearings : UCF type with...

Condition: ready for operation (used), Rotary drum parts washer, industrial parts washer, used machine Manufacturer: Jensen Fabricating Engineering Inc. Model: ----- Overall dimensions: Width: 2730 mm Depth: 1700 mm Fedpsxxizxsfx Ac Nsfu Height: 1820 mm Electrical data: 460V; 60Hz; 58A Drum diameter: 450 mm Drum perforation size: 9 mm

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 133 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 895 S HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 1000 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 85-155 Connection power [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 133 EQUIPMENT: NEW durable pressure gun from the German brand R+M Ffedpjyinxfsfx Ac Nju NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in cleaning agent tank allows for dispensing cleaning agent directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fluid tank RM110 water softener prevents corrosion and scale accumulation inside the heating coil and other pipes.

Year of construction: 2007, condition: used, functionality: unexamined, machine/vehicle number: 280607, Open top vertical washer: 4 brushes, glass thickness manually adjustable 3-30 mm, working direction right-to-left (R-L). Inlet conveyor: L1500xW820xH2200 mm Main body: L1950xW1450xH2400 mm Outlet conveyor: L2040xW800xH2200 mm Fsdpfx Aeyimpyec Njfu Blower: L1300xW900xH1100 mm.

Condition: used, Year of construction: 2002, machine/vehicle number: LA14, Technical Specifications & Performance Data The Bottle Washer Dryer 5008 is a rotary carousel drying unit engineered for reliable bottle handling within a used bottling line or standalone drying station. Manufactured by Cimec, this second hand machine delivers consistent performance for beverage production and industrial packaging applications where efficient moisture removal is required before downstream labeling, capsule application, or case packing. Ffsdjyhbdlepfx Ac Nsu Model: 5008 Year of manufacture: 2002 Production speed: up to 3,500 bottles per hour Bottle formats (volumetric): Compatible with 0.5L and 0.75L bottle formats Bottle geometry: Cylindrical containers Bottle diameter range: 60 mm to 115 mm Drying technology: Rotary carousel (hot air) with anti-condensation features PLC installed: No Documentation: Paper manuals and electrical schematics available Advanced Automation & Control Systems The 5008 emphasizes robust mechanical design with straightforward operator control, ideal for facilities prioritizing simplicity and ease of maintenance. While no PLC is installed, the machine’s hot-air drying system integrates anti-condensation management to improve drying effectiveness and reduce residual moisture on the bottle surface. Safety guarding and interlocks are typically part of this class of equipment, supporting safe operation within production environments. Quick mechanical adjustments facilitate format changes across the stated diameter range, helping minimize downtime between production runs. Production Line Integration Capabilities This rotary bottle dryer can operate as a dedicated station or be integrated inline with rinsing, filling, capsuling, and labeling equipment. It is well suited for beverage production lines processing both PET and glass bottles in cylindrical formats. Its compact, carousel-based layout supports smooth infeed and discharge with standard conveyor systems. Format changes within 60–115 mm diameter allow flexibility across common bottle sizes, making it a practical fit for lines handling 0.5L and 0.75L formats. Machine Condition & Maintenance History The machine has undergone a partial refurbishment in 2025 and has been stopped for approximately one month. It is currently packed and covered, available for inspection. The presence of paper manuals and electrical documentation supports easier recommissioning and setup. Overall, the unit presents as a well-kept second hand component suitable for integration into a used bottling line or as a targeted retrofit in an existing beverage production facility. Operational Performance & Versatility The hot-air drying concept with anti-condensation control improves surface dryness prior to downstream operations such as label application or capsule fitting, thereby enhancing label adhesion and presentation. The rotary carousel design ensures consistent residence time and uniform air exposure around the container. Suitable for a broad range of cylindrical bottles, the 5008 supports both PET and glass handling and can complement production of wine and other beverages where high-quality presentation and dry surfaces are required. Ins...

Condition: reconditioned (used), functionality: fully functional, operating pressure: 140 bar, empty load weight: 100 kg, input voltage: 230 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 6/14 CX HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. The integrated hose reel makes it easy to roll up and store the hose. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient single-phase motor ensures stable operation even during prolonged use. With operating parameters of 140 bar and 560 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Voltage (Ph / V / Hz): 1 / 230 / 50 Discharge capacity (l/h): 240 – 560 Operating pressure (bar): 30 – 140 Feed water temperature (°C): 85-155 Connection power (kW): 3.6 Fuel consumption (kg/h): 3.5 Power cable (m): 5 Fuel tank (l): 15 Cleaning agent tank (l): 15.5 Weight with accessories (kg): 100 EQUIPMENT: BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fjdpfoyifnzjx Ac Nsfu RM110 water softener tank prevents corrosion and accumulation of scale inside the heating coil and other pipes.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, empty load weight: 133 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 895 HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 170 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 900 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 155/98 Fsdpfx Acsyifixo Nofu Connection power [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 133 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in cleaning agent tank allows for dosing cleaning agent directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fluid tank RM110 water softener prevents corrosion and scale accumulation inside the heating coil and other pipes.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 695 M Eco HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 170 bar and 800 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: MODEL: HDS 695 M Eco Power supply voltage [V]: 400 ~ 3 phase Discharge capacity [l/h]: 800 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 155/98 Connection power [kW]: 5.9 Hose length [m]: 10 Fuel tank [l]: 25 Chemicals tank [l]: 20 Device weight [kg]: 130 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Ffodjyifgqjpfx Ac Nou Simple design and easy access to individual components under the housing make the machine user-friendly and easy to use servicing The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Year of construction: 2026, condition: new, IWR 2000D - The fruit washer with mill for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water and, after pre-washing, transported via the conveyor belt where they are thoroughly cleaned with fresh water. Afterwards, the cleaned fruits enter the mill, where they are processed to the desired mash consistency using the selected sieve. The washing system is also equipped with a dosing attachment for pack presses. Technical Information • Nominal capacity: 1500 kg/h • Power requirement: 3 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L per batch • Water consumption: 12 L/min • Water connection: 3/4” quick coupling • Electric control cabinet with IP65 protection rating • Swiveling Rätz mill • Equipped with rollable wheels • Easy to clean • Through the frequency converter, the conveyor capacity can be easily adjusted Dimensions: Length: 3250 mm Width: 840 mm Height: 2270 mm Ffodpfstu Ikcox Ac Neu Weight: 160 kg

Condition: new, Year of construction: 2026, The fruit washer for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. Initially, the fruits are immersed in water for thorough pre-cleaning. Afterwards, they are transported further via the conveyor belt and carefully cleaned with fresh water. Fsdpfsv Srp Ajx Ac Njfu Technical Information • Capacity: 1000 kg/h • Power requirement: 0.75 kW, 230 V, 6 A • Material: WNr. 1.4301, AISI 304 stainless steel • Water connection: 3/4” quick coupling • Electric control cabinet with IP65 protection rating • High-quality workmanship • Equipped with rollable wheels • Low maintenance requirements Dimensions: Length: 2915 mm Width: 840 mm Height: 2270 mm