Case clamp

Gannomat Concept Primus

Condition: used, Year of construction: 2007, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Itodpfxewtmg De Abnok Mist extractor N181 Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047

Condition: new, Year of construction: 2026, For professional and precise glue supply in dowel holes and back side grooves. Short introduction: • Always the same and right glue amount • No afterwards cleaning of the workpieces of too much glue is necessary • Easiest and minimal cleaning (1x week) of the gluing system (through cleaning program) Itsdpfxsdxz Tpo Abnok • Glue cost savings • Ergonomic and light glue gun compared to squeezy glue bottles • Faster and more precise working compared to squeezy glue bottles

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Itedpfx Asiidm Nsbnok Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Short introduction: Ijdpjdx Axfsfx Abnetk • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: used, Year of construction: 2025, functionality: unexamined, Homag Centateq P110 PROFI BMG110/3115/F/K CNC machining centre (2025) with  Almig Combi XP15 receiver mounted air compressor (2025) Isdpfxozc Rzpj Abnjtk Air Plants Dust Extraction Ltd dust extraction system (2025)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, VOLLMER CHX840 circular saw blade sharpening machine Machine manufactured in 2022 Iedpfxszpg Uke Abnetk Automatic sharpening of the face and back of blades from 80 to 840mm Operation with oil and reinforced pump Oil mist extraction Manual extinguishing system Grated floor tray under the machine Chisel sharpening device Multi-faceted tooth geometry program (free programming) Automatic acoustic zero-point detection system Face grinding wheel, back grinding wheel, centering rings, automatic blade support Transportation, delivery and training available

Condition: as good as new (ex-display), Year of construction: 2025, Max Ø 114mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Feed speed (m/s) 1-5 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Feed motor (kW) (2x) 0.12 Iodpfx Abetzkgbjnstk Total power (kW) 5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: as good as new (ex-display), Year of construction: 2026, Swivel spindle: Yes 0 to 45° Height adjustment: handwheel / electric Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Swivel angle display: Digital display Milling stop indicator: mech counter Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Itjdpjuzkxxofx Abnjk Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 550 h, machine/vehicle number: 99, 🚀 GEDA 500 Z – OKOMITA GRAĐEVINSKA DIZALICA NA ZUBASTU LETVU Rabljena, 2015. godina – potpuno servisirana u GEDA Njemačka Jamstvo: 12 mjeseci 🏗️ POUZDAN NJEMAČKI STROJ – SPREMAN ZA RAD GEDA 500 Z je profesionalna okomita građevinska dizalica za materijal, idealna za podizanje teških i glomaznih tereta. Zahvaljujući robusnoj GEDA konstrukciji i jednostavnom održavanju, ovaj model se godinama pokazuje kao jedna od najpouzdanijih dizalica u industriji. Dizalica je servisirana direktno u GEDA Njemačka, potpuno obnovljena i isporučuje se s jamstvom od 12 mjeseci. ⚙️ TEHNIČKE SPECIFIKACIJE Proizvođač: GEDA (Njemačka) Model: 500 Z Godina proizvodnje: 2016. Pogon: 5,5 kW / 400 V / 50 Hz Visina dizanja (max): 100 m Nosivost: 500 kg Brzina dizanja: 30 m/min Dimenzije platforme: 1,4 × 1,6 m Mast sistem: GEDA UNI-X-MAST Itedpfexvygaox Abnek OPTIČKO STANJE: ODLIČNO - PUNO NOVIH DJELOVA TEHNIČKO STANJE: ODLIČNO - SVAKA DIZALICA POSJEDUJE KONTROLNI LIST PROIZVOĐAČA GEDA DA JE DIZALICA POTPUNO ISPRAVNA 🧰 PRIBOR ZA VISINU DIZANJA DO 20 m Elektromotor s košarom Kabel za visinu dizanja do 50 m – 1 kom ČELIČNI STUP 1,5 m sa zupčastom letvom – 13 kom Učvršćenje za stup – 4 kom Vodilica za kabel – 3 kom Kompletno servisirano, spremno za rad 💡 DODATNE INFORMACIJE ✅ Dizalice servisirane i testirane u Njemačkoj ✅ Jamstvo 12 mjeseci od dana kupnje ✅ GEDA certifikat i dokumentacija proizvođača ✅ Platforma se zakreće za 90° radi lakšeg utovara i istovara ✅ Transportni sustav na jednoj osi dostupan u dodatnoj opremi ✅ Upute dostupne na hrvatskom, njemačkom i engleskom jeziku 🆕 NUDIMO I NOVE GEDA DIZALICE I KOMPLETNU OPREMU Uz rabljene, u ponudi imamo i nove GEDA dizalice i liftove svih tipova: Okomite i kose građevinske dizalice Platforme za materijal i osoblje Pribor i dodatke za sve GEDA modele Sve nove i rabljene, obnovljene GEDA dizalice dolaze s punim jamstvom, certifikatom proizvođača i mogućnošću isporuke odmah. PRVA RUKA – GENERALNI ZASTUPNIK GEDA DIZALICA ZA HRVATSKU VEĆ VIŠE OD 30 GODINA. Specijalizirani za prodaju, najam, servis GEDA liftova, dizalica i kompletne opreme.

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot-operated 1200 x 800 mm 80 mm dust extraction port pneumatic connection Cable + plug, 16 A 1 set of operating tools Itjdpfxsigadle Abnsk 1 set of feeler rollers