Used Frame Clamp for sale (16,483)

Condition: good (used), Year of construction: 2022, functionality: fully functional, Assembly line for timber frame construction - framing machine X-Frame - clamping table X-Clamp - automatic working bridge X-Multi - tilting table X-Tilt Pedpjxd Awwofx Agwsgu - clamping table X-Clamp - clamping table X-Clamp - bridge X-Multi

Condition: new, Year of construction: 2023, machine/vehicle number: A2306/9210, The pneumatically working drawer clamp type Box V3.0 ensures a simple and fast assembly of drawers and frames. Thanks to its functional design, it is possible to press single parts as well as complete drawers with different connections. This way, a perfect connection as well as shape of the drawer can be guaranteed. Because of the special clamping process, folding connections and drawer fronts with glass insets cannot be deformed. Maximum clamping power: vertical: 800 kg / horizontal: 800 kg Adjustable depth stops allow clamping of drawers with longer fronts Lateral press units slowly approach the workpiece Machine operation via joystick. Special equipment: - Digital positioning readout - Kit Door (for frontal clamping of drawer corners) Advantages: - High flexibility: Variably adjustable clamping unit for drawers and frames of different dimensions - Minimum set-up times allow high output - Intuitive operation - High safety standards due to CE-conformity e.g. 2-hand-operation Podpfxogqfnze Agwegu - Plug & Play

Condition: used, Load capacity: 3 t Pedpfx Agob Nwkxowsgu Opening width: 38 mm Weight: 15 kg

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Pgedscmat Uspfx Agwou the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: new, 2 Storey R-Linear Steel Frame Houses Insulated PVC Windows Throughout Boiler, Fridge, Cooker, Bathroom All New - Never Lived In Pgjdpfew R Tk Ajx Agweu Dimensions: 5m x 9.5m x 3m Weight: 12 tonnes

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 15914, PRESS RUNNER MACHINE TYPE: EPT63 YEAR BUILT: 1999 MACHINE NUMBER:15914 MACHINE DATA Pjdsrypfyepfx Agwsgu Pressing force: 630 KN Idle noise: 69.2 dB Drive power: 22+4 KW Cooling: Type air TYPE OEKA-R4/1.0 Operating pressure: 260 bar Oil quantity: 285 liters. Weight: 6000kg TRAVEL DISTANCE MEASUREMENT: Overtravel: 20mm Follow-up time: 90ms Safety distance: 180mm DIMENSIONS: Installation height max: 600mm Ram stroke max: 400mm Throat: 280mm Table height: 850mm Table width: 630mm Table depth: 500mm

Condition: used, Panel lifting clamp, sheet metal clamp, sheet metal claw, girder clamp, girder claw, sheet metal gripper, material gripper, material gripper -Sheet metal claw Psdpfxsdi Smlo Agwegu -Span width: up to 152 mm -Load capacity: 2500 kg -Number: 1x terminals available -Price: per piece -Weight: 29 kg/piece

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -with chain: 1.3 m Pgodpfx Aod Hb Imsgwsu -Span width: 44 to 70 mm -Load capacity: 6300 kg -Dimensions: 300/460/H120 mm -Weight: 30 kg

Year of construction: 2007, condition: good (used), Make: HAEUSLER Type: Clamp Year: 2007 Pgodekwcn Eopfx Agwou Specifications Metric US Standard Min. shell inner diameter 1800 Max. shell inner diameter 5500 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 10 mm Maximium wall thickness 40 mm Max. section weight 15 T Max. weight total workpiece 60 T Dimensions (Estimate) Length 24000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, pressure: 125Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 11weight approx.: 8000messurements (LxWxH): 1800 x 1500 x 2600 Pgsdpektm N Djfx Agwsu

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 50 mm -Load capacity: 6000 kg -Number: 1x terminals available -Price: per piece -Weight: 28 kg/piece Pgedpeb A Hbcjfx Agwju

Year of construction: 1980, condition: used, passage width 560 mm passage height 560 mm stroke 600 mm Speed max. 320 1/ min. The creel is completely mechanized with new Moehringer high speed infeed. Psdpfocvhndox Agwegu

Condition: used, Used machine Features and technical data: Working width: 300 mm Sanding belt oscillation: mechanical Roller guide: rubber-coated Sanding unit: with sanding shoe Feed speed: 2-stage Pgodpfxexq Ua Ro Agwsu Feed direction: reversible (forward/reverse) Motor start: star-delta Power supply: 380 V Weight: approx. 450 kg Availability: short-term Location: Baden-Württemberg

Condition: used, Year of construction: 1982, Press dimensions: 3500 x 2600 mm Electrohydraulic unit for 4 hinge cup drillings, complete, 4 hinge cup drilling units Left upper corner plate with 2 cross pressure cylinders 4x hydraulic wood holders Intermediate inserts for small pressing with drilling unit Central pressure beam 2600 mm Longitudinal pressure cylinder with counterholder 4x hinge cup drills Storage location: At customer site Pgodpjxftcaofx Agwou

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 1683, overall weight: 400 kg, table length: 440 mm, table width: 420 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to the closure of a business. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! Pgsdpfx Agoxqnq Aswou TECHNICAL DETAILS Table dimensions: 440 x 420 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 800 x 600 x 1,900 mm Weight: 400 kg

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Pgjdpotqwtdofx Agwou Ram Adjustment: 40 mm (automatic adjustment)

Condition: used, tank capacity: 160 l, GENERAL Design: suspended Remarks: Suspended design in a tiltable frame made of V2A; without bottom outlet; top opening diameter approx. 700 mm (tapering towards the bottom; see photos) Total height: 1,100 mm Heating/Cooling: available Top: open with loose lid Stand type: frame Pgodpfxexqduqo Agwju Location: Bremen Nameplate: Volume: 160 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Outlet: not available MATERIAL SPECIFICATION Temperature system material: V2A 1.4301 (AISI304)

Condition: new, Year of construction: 2014, operating hours: 46 h, load capacity: 300 kg, lifting height: 1,850 mm, fuel type: electric, mast type: duplex, construction height: 1,500 mm, Manufacturer + model LINDE L 16 (372) Mast 2W1850 + KAUP / Drum clamp ID 23032.5921 Mast 2W1850 Lowered height 1500 mm Lifting height 1850 mm Year 2014 Operating hours 46 Capacity 24 V / 345 Ah Options: Equipped with free-carrying -> Drum clamp KAUP 0.8 R405 Drum clamp range = 450 to 850 mm Pjdpfx Agjxrpr Dowjgu

Condition: new, Year of construction: 2025, Attachment suited for: Agricultural machines Pedpfsxrnv Uex Agwjgu

Condition: new, Bernardo Frame Press HRP 3000 Robust and torsion-resistant hydraulic frame press with high-quality pressure cylinders. Whether it is used for furniture or door production, block or frame gluing, the high pressing force of 2,000 kg per cylinder and precise, angle-accurate pressing of large-sized components enable all tasks to be carried out effortlessly. Technical Specifications Working length: 2,400 mm Working height: 1,550 mm Cylinder stroke: 95 mm Pressing force: 2,000 kg Vertical hole pitch: 50 mm Horizontal hole pitch: 160 mm Overall length: 3,250 mm Overall height: 2,070 mm Frame depth: 925 mm Weight: approx. 315 kg Features • Versatile use, e.g. for frame, window, and door production • Robust frame press with solid steel construction • Centralized control of the hydraulic cylinders including pressure gauge • Efficient gluing thanks to hydraulic design • Pressure cylinders equipped with rocker plates as standard Scope of Delivery • 4 movable pressure beams, each with one vertical hydraulic cylinder and counter support Pedpfx Asxrnvbjgwogu • 1 movable pressure beam with two horizontal hydraulic cylinders • 1 movable, adjustable pressure yoke

Year of construction: 2025, condition: new, Big Bag rack Cross beam for Big Bag for forklift/crane Pgedsxnbk Depfx Agweu Pneumatic discharge Aluminum container for material collection With sieve and suction connection with filter

Condition: used, Hydraulic machine vice, high-pressure clamp ARNOLD / FRESMAK Jaw width: 160 mm Jaw height: 50 mm Pjdpfx Aoxp R E Tjgwjgu Clamping force: 5 tons Clamping range: 0 to 305 mm Maximum opening: 308 mm Guideway height: 112 mm - 2 clamping ranges adjustable via locking pin, 0 to 158 and 148 to 308 mm - with rotary plate Dimensions (L x W x H): 580 x 325 x 165 mm Own weight: 65 kg Good condition

Condition: used, tank capacity: 8,651 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; total height incl. agitator gearbox (without gearbox approx. 3500 mm); Speed: 26.5 / 118 rpm Internal diameter: 2,000 mm Total height: 4,550 mm Heating/Cooling: present Power: 5 / 15 kW Max. allowable operating temperature: 220 °C Max. allowable operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Agitator: beam agitator Support type: ring Location: Bremen Technical documentation: Drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,651 liters Jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Last application: chemicals VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. allowable operating vacuum jacket / pipe space / bar: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in the top head Outlet (alternative entry): 105 mm Remark: Motor missing, manway cover plated MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) Flange material: steel Pedpfxoxqavdj Agwsgu AGITATOR Agitator arrangement: centrally in top head Agitator equipment: Agitator type: frame blade agitator; agitator motor missing, but available from manufacturer; various agitator documents available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top head wall thickness: 14 mm

Condition: new, Year of construction: 2025, Attachment suited for: Lifting equipment Psdpfx Agoxrntmewsgu

Condition: used, tank capacity: 8,609 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; internal vessel with signs of corrosion (see photos); total height incl. agitator gearbox (approx. 3,400 mm without gearbox); Speed: 52 / 104 rpm Internal diameter: 2,000 mm Total height: 4,950 mm Heating/cooling: available Max. allowable operating temperature: 220°C Max. allowable operating pressure: 20.0 bar Max. overpressure: 6.0 bar Pgsdpfx Ajxqau Togweu Top head: Removable/openable top cover Agitator: Paddle agitator Base type: Ring Location: Bremen Technical documentation: Drawing Jacketed cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,609 liters Jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,190 mm Last application: Chemical VESSEL Max. vessel operating temperature / °C: 200°C HEATING/COOLING JACKET Max. allowed operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manway / dome: in top cover Outlet (alternative entry): 100 mm Note: Motor missing, manway cover missing MATERIAL SPECIFICATION Temperer system material: V4A 1.4571 (AISI316) Flange material: Steel AGITATOR Agitator manufacturer: Ekato Agitator equipment: Agitator type: Paddle frame agitator; Agitator motor missing, but available from manufacturer; various agitator documents available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top cover wall thickness: 14 mm