Clamp tool for sale
Your location was not identified (Edit)
2003
used
used
Tenant, tension prats, deep tension baking, clamping documents, clamping tool, step scratching
-Length 850 mm
-Recording 34 x 75 mm/22 x 85 mm
-Dimensions 850/80/H75 mm
Gxs7edl
-Weight 34 kg more
used
Intermediate piece with tool clamping device UKB for press brake tool
Tool holder for press brake, press brake
Bfdochnq
Type 50.667
6 tool holders for upper tool with quick clamping
length per clamp: 150 mm
height of the clamp holders: 120 mm
- Intermediate piece = 150 mm, order no. No.: 50.667
- Clamping device with screw toggle = 150 mm, order no. No.: 50551
- e.g. suitable for AMADA Akantpresse
- Suitable for working length 1250 mm
Weight 37 kg
very good condition more
Hydraulic tool clamping system
Comes from a Deckel FP3A vertical spindle
We have more parts for this machine
9b8raqlfa more
We sell a position clamping tools/accessories from an insolvency!
Stvueg
Scope and condition according to the pictures.
Sale from an insolvency.
Buyer receives an invoice for the purchase price with
declared VAT
Sale from insolvency therefore under exclusion of any warranty!
Over 10.000 different articles in stock! Please inquire!
Visits are possible at any time by arrangement. more
good (used)
1996
ready for operation (used)
- hydraulic upper tool clamping from WILA
- 4 x 1000mm segments
Bigu7c0pfl
- hydraulic power pack 220V
- Bore distance 170 mm more
used
Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step clamps
-length 315 mm
Bg33rxnhzj
-Groove width 25 mm
-Price per piece
-Number of 4 pieces
-Dimension 315/65 / H40 mm
-Weight 3.8 kg more
used
Roller jaws, floating center jaws, pull-down jaws, machine vice jaws
Nwyf9
-Tensioning tool 270 mm
-Groove 14 x 36 mm
-Dimensions 270/20 / H50 mm
-Weight 2.0 kg more
used
Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools
-Number: 4 pieces
-Clamping height: 95 mm
-Price: for 4 pieces
-Weight: 10 kg
Gtqu3w more
used
Step claws, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools
Hht9t9lyq
-Number: different sizes
-in a tool cabinet
-Dimensions: 800/720/H1050 mm
-Weight: 300 kg more
used
Step claws, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools
Qlnilasbg
-Clamping heights: 15-240 mm
-for: 12 mm groove width
-Number: 15x available
-Price: complete
-Dimensions: 500/320/H200 mm
-Weight: 30 kg more
used
Step claws, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, clamping devices
-various: clamping heights
-Thread sizes: M24/M30
Qloyt9boi
-Price: complete
-Weight: 88 kg more
used
Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws
Qlsr7ntg9
-2 pieces: 18x125 mm
-2 pieces: 18x160 mm
-Price: complete
-Package
-Weight: 4.5 kg more
used
Tenant, tension prats, deep voltage baking, clamping documents, clamping tool, step prats, low voltters, clamping irons, accessories
-for T-Nut 48 mm
-Tension up to about 300 mm
-Span depth 140 mm
-Price per piece
Gfwwvph
-Number 5 pcs
-Measure 200/100/H450 mm
-Weight 4.2 kg more
used
Tenant, tension prats, deep voltage baking, clamping documents, clamping tool, step prats, low voltters, clamping irons, accessories
-for T-Nut 30 mm
Blodg9di
-Tension up to about 300 mm
-Span depth 140 mm
-Price per piece
-Number 10 pcs
-Dimensions 180/80/H440 mm
-Weight 2.6kg more
used
Tenant, tension prats, deep voltage baking, clamping documents, clamping tool, step prats, low voltters, clamping irons, accessories
-for T-Nut 48 mm
-Range up to about 350 mm
-Span depth 120 mm
-Price per piece
-Number 5 pcs
Nmjxf
-Dimensions 180/100/H510 mm
-Weight 4.2 kg more
used
Tenant, tension prats, deep voltage baking, clamping documents, clamping tool, step prats, low voltters, clamping irons, accessories
-for T-Nut 45 mm
-Voltage height up to about 500 mm
-Span depth 120 mm
Stea2g
-Price per piece
-Number 4 pcs
-Measure 180/80/H650 mm
-Weight 4.8 kg more
used
Tenant, tension prats, deep voltage baking, clamping documents, clamping tool, step prats, low voltters, clamping irons, accessories
-Range up to about 260 mm
-Span depth 140 mm
-Price complete
-Number 3 pcs
-Dimensions 300/140/H320 mm
-Weight 3.5 kg/pcs
Kc2dbsxj more
used
Clamping devices, clamping claws, deep clamping jaws, clamping supports, clamping tools, step chucks
-Groove width 21.5 mm
-Price completely
-Package
-Weight 29.5 kg
Bfal9cmd2g more
Temperature 90 Degr. C, Make Tool Temp (CH), Type TT 168 E c, . 315-6464-1, Tank capacity 16 Ltr., Motor 12 kW 380 Volt, With temperature controller , New 2015, With switchgear , Floorspace 0,8x0,4 M, Total height 0,8 M, Weight 100 Kg, CE , Extra Specifications Temperature control: self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature w control: electronically, with digital display and automatic control of the minimum... more
used
Refroidisseur TOOL TEMP TT14500H
Cbzluh0i
Capacité de refroidissement : 14 KW
Capacité de chauffe : 6 KW
Capacité de la pompe : max 8,5 bar et max 75 L/MIN
Dimensions : 980 x 660 x 1300 mm roulettes incluses
Poids: 190 kg à vide
Ce refroidisseur à air est équipé d'un chauffage additionnel dans le circuit d'eau avec controle de débit éléctronique. Appareil mobile pour machine individuelle ou groupe de machines more
used, fully functional one is sold
PWB SWISS TOOL PRESETTING DEVICE - TEST DEVICE FOR TOOLS
TMA 21P - MEASURING HEIGHT UP TO MAX. 400mm
Mcrsvjmb
MEASUREMENT ELECTRONICS OPERATING INSTRUCTIONS AVAILABLE
As far as we could check the device, it works!
All items offered come from bankruptcy and bankruptcy estate and are set to the best of our knowledge and belief.
As we are not a specialist shop, we ask you to look at the photos and the article description carefully.
Condition see pictures!
S... more
not much used NC lathe with control Fagor 8055 TC, turning length 895 mm, distance between Centers 1120 mm, Center high 265 mm, swing-Ø over bed 530 mm, swing-Ø over carriage 300 mm, bed width 350 mm, bore Ø 80 mm, spindle speed 48-2200 U/Min., motor 15 KW, dimensions 2300x2000x1950 mm, ca. 3000 kg, incl. 3-jaws chuck Röhm Duro T-315, increased spindle Speed with cooler, steady rest with bearings Ø 80-280, coolant device, 2nd door, manual
Nuehn more
Straight Tube Cutoff System for 7,5mm x 0,5mm tubing
we used it to cut CuNi90/10 and Stainless Steel Tubing
technically ok ... works perfectly and ran smoothly for 20 years!
cuts and straightens tubes from the roll(coil)
feeding of individual straight pipe tubes is also possible
Hnxmhxooe
not cleaned
Including operating instructions more
Temperature 90 degr.C, Make Tool Temp (CH), Type TT 168 E, . 312-4543-1, Tank capacity 16 Ltr, New 2012, With switchgear , Floorspace 0,8x0,3 M, Total height 0,7 M, Weight 150 Kg, CE , Extra Specifications Temperature control: self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. Flow control: electronically, with digital display and automatic control of the minimum flow. Temperature range : Water up to 9... more
used
1984
ready for operation (used)
The single-column turning-boring lathe model 1512 is a universal machine designed for processing a variety of products from ferrous and non-ferrous metals in conditions of small-scale and serial production.
Model 1512 is the most widespread among boring lathes in the territory of the former USSR. The machine allows turning parts up to 1250 mm in diameter, up to 1 meter in height and up to 3200 kg in weight. The machine has been exported to many countries around the world.
The following operatio... more
The controller was checked and removed from a device
Szha98yl
New price of the controller approx. 670 € more
2011
good condition (used)
138 bar - 8 output lines - flow rate 16 l/min -
motor 3.75 kW - weight 377 kg - 3 phase 400 V -
type of coolant oil only
Blvqz8dp0e
it was fitted to Star SR-20RIII more
Temperating machine , Make Tool-Temp AG 9CH), Type TT-137 N, . 29-02921-1, Material Stainless steel, Working pressure 5 Bar, Water heater , Electric heating , Heating medium: (Presurized) water, Electric capacity 12 kW, Temperature Max 160 degr C, New 2007, Mounted on wheels , With switch , Floorspace 0,9x0,4 M, Total height 0,9 M, Weight 160 Kg, CE , Extra Specifications The TT-137 is a compact and rugged Temperature Control Unit for pressurised water circuits. It provides safe and accurate tem... more
used
This pump was located in a temperature control unit from the company Tool-Temp
Model TT157E
Bjljfiz30z more
Radial drill press in good condition.
With motorized boom (Up / Down)
Morse taper 4
Travel on the boom: 725 mm.
Travel on spindle: 270 mm.
32 - 2500 rpm.
0.06 - 0.8 mm / rpm feed rate.
Bnxo2cb
Spindle diameter: Ø65 mm.
Max height between table and spindle: 995 mm.
Total dimensions: 180 x 85 cm.
Height: 248 cm. (Transport height: 228 cm) more
The following article is for sale:
- Our offer number:21/102
- Temperature control unit
- Manufacturer: Tool-Temp
- Type: TT-157 E
- Serial number: 24-04317-1
- power 9,85 kW
- Supply voltage: 3x380V, 50Hz
- Water content 6 L
- Digital display
- Dimensions : HxWxD 60x24x63 cm
- optical condition according to photos
- some screws are missing on the side panels
- the on/off switch is defective (there is no plastic on the switch see photo)
- Digital display
- radio-ready
- used
- Weight 75 KG
-Disp... more
Temperating machine , Make Tool Temp, Type TT-162E, Floorspace 0,8x0,3 M, Total height 0,9 M, Weight 120 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
Dt8fnziji more
Temperature control unit Tool-Temp TT-134
device no.: 95-4618
Heat carrier: water
Maximum temperature setting: 140°C
Output: 25700 watts
Connection: CEE63
L: 90 cm | W: 40 cm | H: 110 cm
incl. operating instructions with views and sections
Fw0larv
Temperature controller MP-694 more
Sharpening TOOL VOLLMER FINZ 4-800
Location
Gorzow Wielkopolski.
Conditions of delivery
Md3zx
Pick your own
Cost of delivery
Client cover
startup type
negotiated
Description
Comments
GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC more
FERMAT Machine Tool, s.r.o., Praha / Czech Republic
HORIZONTAL PANEL BORING AND MILLING MACHINE - WRF 130/150/160 CNC
Myx9x
to X: 30,000 mm *** Y: 6,000 mm and spindle diameter up to 160 mm
The horizontal CNC boring and milling machine WRF 130/150/160 represents new structural concepts of horizontal panel boring mills on the market. The powerful headstock consists of an extendable stick (travel V) and an extendable spindle (travel W). The WRF boring mills make it possible to achieve extremely hi... more
Temperature 90 degr. C, Make Tool Temp AG (CH), Type TT 168 E, . 312-4005-1, Tank capacity 16 Ltr, New Unknown, With switchgear , Floorspace 0,9x0,4 M, Total height 0,8 M , Weight 140 Kg, CE , Extra Specifications Temperature control: self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. Flow control: electronically, with digital display and automatic control of the minimum flow. Temperature range : Water... more
Power : water 90°C / mould weight up to 1'200 kg
oil 150°C / mould weight up to 600 kg
Equipment / Additional information:
7eiy8kr8g
Pump capacity: 4.5 bar
Cooling: indirectly
Temperature range: up to 150°C
Heating capacity: 6 kW
Cooling capacity: 45 kW at 90°C
Flow control: Yes
Temperature control: MP-888 more
vice
Make Chick machine tool
Length 500 mm
Width 150 mm
Height 130 mm
Bgoxj0wamo
Weight 22 kg
Age estimated
Jaw width 150 mm more
FERMAT Machine Tool, s.r.o., Praha / Czech Republic
FERMAT HORIZONTAL TABLE DRILLING AND MILLING PLANT - WRFT 130/150/160 CNC *** X: 2.400 mm to 9.500 mm *** Y: 2000 to 6.000 mm and spindle diameter up to 160 mm
The horizontal bench-type boring and milling machine WRFT 130/150/160 CNC offers a new, conceptual machine solution among the large bench-type boring mills with an efficient and powerful headstock. This in turn consists of an extendable stick (travel V) and an extendable spindle (travel ... more
Sharpening TOOL Schonberger NURNBERG TKRS
Wbirpx82p
location
Gorzow Wielkopolski.
Conditions of delivery
Pick your own
Cost of delivery
Client Cover
startup Type
negotiated
description
Comments
GRINDING AND SAW tape Blades for circular saws and milling Dividing HAVE COMPLETE READY TO WORK more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
New Machineseeker.com TV commercial with Michael van Gerwen
Sample sales contract for used machines in nine languages
10 valuable tricks for buying used machines online
Machineseeker now also sponsering Greuther Fürth
Photo gallery: the 10 strongest forklift trucks in the world
