Used Manual Rotary Table for sale (31,665)

Condition: used, Technical details: table load: 3 t table diameter: 1280 mm table rotating: 0-180 Grad Ihsdpfexz E Exox Ah Net table - inclinable: nein / no Grad machine weight approx.: 1,376 kg dimensions LxWxH: 1,4 x 1,7 x 0,18 m positioning rotary table Load capacity tested up to 3 tons. Currently operates in 2 positions at 180 degrees. Can be modified up to a maximum of 270°. *

Condition: used, Year of construction: 2008, Technical details: table diameter: 1000 mm table height: 75 mm max. table load: 250 kg weight of the machine approx.: 1128 kg dimensions: Aggregat: L: 1400 x B: 1000 x H: 160 mm 1-axis NC rotary table - horizontal Positioning and rotary machining mode; intermittent operation with 8 star-shaped T-slots according to DIN 650: a=18H7; h=31mm; b=31mm; c=13mm x length 380mm Finished surface Overall height 250mm Turning: Rotation 360°, by means of incremental encoder, speed 2160°/min. Angular acceleration 120°/sec.²; positioning time 0.867 sec., speed max. 6 rpm, machining 1 rpm. Load on indexing plate axial max. 100kN, radial max. 115kN; Ijdpou N D A Tofx Ah Neht Torques tangential 14,000 Nm as well as worm gear 7,000 Nm and circular machining 2,700 Nm Measuring system Heidenhain - RON 886 C type connections (2x G 1/4" and 2x G 1/8") *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250 mm table rotating: 360 ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/U Ihsdpfju N D Szjx Ah Njt total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Rotary table conventional *

Condition: used, Year of construction: 1975, Technical details: table diameter: 320 mm table height: 50 mm rotation movement: 360 Grad passage inside table: Ø 40 mm weight of the machine approx.: 73 kg space requirements of the machine approx.: L:0,63xB:0,53xH:0,14 m round table movement via manual wheel machine operation possible T-slot: 3x long and 1 x transverse - a=18mm Iodeu Nkpmspfx Ah Nsht - b=30mm - h=29mm - c=12mm *

Condition: used, Technical details: table length: 2000 mm table width: 1700 mm table load: 15 t x-travel: längs=3000 mm table rotating: 360 motorisch ° height over floor: 1020 mm total power requirement: ca. 1,0 kw weight of the machine ca.: 14,2 t dimensions: 5,7x2,1x1,0 m Ihedpfx Aheu N D Sbe Njt The boring mill table was built in 1985 and overhauled in 2023 (retrofit) The table is mounted on a flat bed guide (5000x1380mm). The axis of rotation (B) is mounted hydrostatically, 9x T-slots according to DIN 650 and 508: a=28mm; h=54mm; b=51mm; c=21mm whose center distance = 160mm B-axis as positioning axis, which is clamped. *

Condition: used, Technical details: weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Isdsu N D S Uspfx Ah Njht Machine table with 5 indexing tables for multi-side machining Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Actuation / drive is hydraulic *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm table rotating: 360 motorisch ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V total power requirement: 6 kW Ihedpfxsu N Ebde Ah Njt weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel T-Nuten nach DIN 650: a=28mm; h=49mm; b=52mm; c=21mm *

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 92ML/109/11821, rotary table diameter: 1,220 mm, grinding height: 572 mm, total width: 4,394 mm, total length: 3,353 mm, overall weight: 13,700 kg, grinding wheel diameter: 711 mm, spindle speed (max.): 550 rpm, power: 35 kW (47.59 HP), table diameter: 1,219 mm, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented. Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg1220 Ihedexgq D Dopfx Ah Nst

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, rotary table diameter: 1,500 mm, grinding height: 457 mm, total height: 3,124 mm, total width: 3,150 mm, total length: 4,165 mm, overall weight: 15,000 kg, grinding wheel diameter: 863 mm, grinding spindle speed: 450 rpm, power: 45 kW (61.18 HP), table diameter: 1,500 mm, LUMSDEN Model 93ML Vertical Rotary Surface Grinder. Refurbished with new bearings in table and spindle, reconditioned main motor, new rectifyer, lubrication system, new control panel. Serial Number: to be advised Ihjdpfswugh Djx Ah Not New 1980's originally Country of Origin: UK Segmental wheel dia 34" Segments per set 16" Table dia and grinding capacity 60" Magnetic table dia (Humphreys) 60" Max height wheel to Magnetic table 18" Minimum height of wheel to table 4.1/2" Spindle speed 450 rpm. Table speeds 16 and 5.1/2 rpm. Automatic feeds 10 rates .004-.040 ins/min. Power elevation 25 ins/min. Spindle motor 60 Hp / 960 rpm 45 kW Table motor 6/2.1/2 HP /1440/480rpm. Feed motor 1/4 Hp / 1440 rpm. Elevation motor 1 Hp / 720 rpm. Coolant pump motor 1 Hp / 1440 rpm. Overall height of machine 10'3". Floor space 13'8" x 10'4". Approx net weight 15 tons.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: F/18/0003334/A/001, Milling robot cell, year of manufacture 2018, essentially consists of: Robot system including console for mounting the robot (upright); Clamping and exchange system, with one fixture inside the enclosed robot cell, the other outside the danger zone, for loading and unloading; Milling spindle including control unit; Safety enclosure and protective equipment; Control cabinet and controller; Vacuum clamping system. The cell can be inspected in operation until the end of January 2026, after which it will be dismantled and will no longer be in operation! Iodpfjx Swiaex Ah Nsht

Year of construction: 1980, condition: good (used), Equipment: 4 horiz. Pinol drilling units, 3 vert. Pinol drilling units rotary table diameter: 400 mm rotary indexing table: 60° pitch weight: 2,6 to 1 switch cabinet Ijdpfxsnvdmwe Ah Neht 1 coolant tank

Condition: used, Year of construction: 1982, Technical details: table length: 2200 mm table width: 2500 mm Iodpfx Ahevb A Uuo Neht table load: 16 t total power requirement: 6,5 kW feed speeds: 1,25 - 160 mm/min rapid traverse speed: 2000 mm/min longitudinal adjustment: 1500 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 4,1 x 2,65 x 0,95 m

Year of construction: 2000, condition: ready for operation (used), Two custom made but expandable and convertible rotary indexing tables for the soldering process are available: 1) Load capacity: approx. 10kg-15kg, mounting points: 4, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2000mm, weight: approx. 500kg, year of manufacture: approx. 2000. The battery is empty. An on site inspection is possible. Iedpfx Aox R Dtpjh Njht

Condition: good (used), functionality: fully functional, rotary table diameter: 650 mm, table diameter: 650 mm, Glauchau Horizontal Spindle Ring Grinder Isdsxxyvmspfx Ah Nsht With 650mm dia. Magnetic Chuck

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 702283, total height: 273 mm, total length: 515 mm, rotary table diameter: 200 mm, EXACT NCT-200 Rotary table (Taiwan) Year : 2006 Turntable ⌀ : 200mm Through Hole : ⌀40 Fanuc motors Ihedpfxjwnwx Hs Ah Njt Weight : 75kg

Condition: used, Jaw chuck different versions Ihodpfsb I Sdxjx Ah Njt from 300mm to 500mm

Condition: new, Welding turntable KT 500, with 100 mm through-hole Horizontal load 600 KG, tilted 300 KG Power consumption AC 380V, 50 Hz Rotary motor AC 400W Table diameter 700mm Height 700mm, width 800mm, length 800mm Weight 155 KG Infinitely variable electric tilt range 0 - 90° Speed 0.3 - 2.5 rpm Welding current transmission max. 500 A Incl. hand remote control foot remote control Surcharge: Quick clamping jaw chuck Iodpjcat H Njfx Ah Noht Diameter 400mm, 550.-€ CE mark/approval

Condition: new, Article: Welding rotary table 50 kg Ijdpfobambrex Ah Njht TYPE: KT-50 without jaw chuck Max. Load: 50Kg horizontal Max. Load: 25Kg vertical Rotation speed: 1-7,5 rpm Rotation direction: left and right Face plate speed: manually adjustable Face plate diameter: 315mm height of faceplate: 375mm inclination angle of face plate: 0-90 Motor power in operation: 0,08kw Motor power standby (Kw): NA dimensions: 430 x 430 x 375mm Weight: approx. 38kg Power: AC 110V / 220V 50/60Hz Price is without chuck and height adjustable workbench Surcharge quick chuck 195.-€ Packing and shipping Germany approx. 80.-€

Condition: good (used), Year of construction: 2024, Welding turntable KT 300 Load horizontal 300 KG, tilted 150 KG Power consumption 220V, 50 Hz table diameter 450mm height 500mm Tilt range stepless via crank gear motor 0 - 90°. speed 0,3 - 2,5 rpm Incl. foot remote control Surcharge: Quick release - jaw chuck Isdebvk I Ejpfx Ah Nsht diameter 300mm, 450.-€

Condition: as good as new (ex-display), 3000 kg welding rotary table, hydraulically height adjustable Speed 0.05-0.6 U/min Table diameter 1200 mm Inclination 0-120° Total height 700 mm Height adjustment with vertical pane until the mid- 960 mm ~ 1910mm Ihsdpfx Aedvn E Ush Njt Horizontal disc mass 1200mm up to 1900mm

Condition: as good as new (ex-display), Super practical heavy table,good quality Welding rotary table 100 KG load capacity Max. Load: 100Kg horizontal Isdpfs Ugnbjx Ah Njht Max. Load: 50Kg vertical Rotation speed: 1- approx.7 rpm Rotation direction: left and right Faceplate speed: manually adjustable Face plate diameter: 345mm height of faceplate: 415mm Inclination angle of face plate: 0-90 Motor power in operation: 0,12kw dimensions: 500 x 470 x 415mm Power: AC 110V / 220V 50/60Hz On request with jaw chuck / quick chuck extra charge 180.-€ Free delivery 90.-€

Condition: good (used), Welding turntable KT 300 Load horizontal 300 KG, tilted 150 KG Power consumption 220V, 50 Hz table diameter 450mm height 500mm Tilt range stepless via crank gear motor 0 - 90°. speed 0,3 - 2,5 rpm Incl. foot remote control Surcharge: Ihodpfxeb Dymhs Ah Not Quick release - jaw chuck diameter 300mm, 450.-€

Condition: good (used), Welding rotary table KT 500, with 100mm through hole Load horizontal 500 KG, tilted 250 KG Power consumption AC 380V, 50 Hz Rotary motor AC 400W table diameter 700mm height 700mm, width 800mm, length 800mm Ihjdpob U Havefx Ah Not Weight 155 KG Tilt range stepless electric 0 - 90 speed 0,3 - 2,5 rpm Welding current transmission max. 500 A Incl. hand remote control foot remote control Surcharge: Quick clamping - jaw chuck Diameter 400mm, 530.-€ CE-sign/approval

Condition: good (used), Super practical heavy table, good quality Welding rotary table 100 KG load capacity Max. Load: 100Kg horizontal Max. load Load: 50Kg vertical Rotation speed: 0,5-9 rpm Rotation direction: left and right Faceplate speed: manually adjustable Diameter faceplate: 345mm Height of faceplate: 415mm Inclination angle faceplate: 0-90 ° Motor power in operation: 0,12kw dimensions: 500 x 470 x 415mm Power: AC 110V / 220V 50/60Hz Iodpfx Aecctnajh Neht On request with jaw chuck surcharge 160.- Free delivery 80.-

Condition: new, 2000 kg capacity welding rotary table, height-adjustable very robust speed infinitely adjustable from 0.05-0.7 U/min Rotary table diameter 1200 mm Tilt up 120 Total height 600 mm Iedodvn E Eepfx Ah Nsht Height of 1450 mm up to 2050 mm height mm min. horizontal 1350, tilted to Center 1200 mm height mm maximum horizontally 1850, tilted up to mid 1700 mm Hand and foot remote control