Used Rotary Table for sale (46,824)

Condition: good (used), Table size:1500x1500mm Capacity : 6t Lhsdpfx Abofvqmxs Uon Dimension: 1600x2500x2000mm Hydraulic

Condition: used, Year of construction: 1988, Technical details: table diameter: 500 mm Lhodpfx Aou N D I Asb Uon table height: 150 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 110 kg dimensions: 800 x 800 x 180 mm Rotary table operation by handwheel Operation Coupling connection Ø 20 x 32mm Foot mounting: 2x clamping groove Ø 19 x29mm Equipment: 8-sided top plate, size 665mmx23mm, 3x through-holes Ø 30mm in the centre Accessories: 4x eyebolts *

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. Ledpfjxabm Nex Ab Uohn - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: excellent (used), functionality: fully functional, Machine type: Universal rotary/tilting/swiveling table with dividing head Manufacturer: Hermle, Deckel, Mikron Condition: very good Type of offer: used machine component Technical data: Note: Size: 670 x 395 mm Mounting size: 480 x 220 mm #### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE #### Ljdexpwbuepfx Ab Uohn The component is in very good and immediately ready-for-use condition and can be inspected at our facility. We would be pleased if our offer is of interest to you. Subject to errors, changes, and intermediate sale.

Condition: ready for operation (used), BELANGRIJKSTE KENMERKEN: Tafelafmetingen: 3000 x 3500 mm Omgeschreven cirkel: 4300 mm Toelaatbare belasting (gelijkmatig verdeeld): 50 ton op 3000 x 3500 mm Totale tafelhoogte zonder cilinder: 1.250 m Aantal T-gleuven, breedte 36 H7: 13 T-sleufafstand: 250 mm Lhedpfx Aboxpggys Uon Lengteverplaatsing: 2700 mm Longitudinale voedingen / bed: • positionering: 2 mm/min • werkend: 1 tot 3000 mm/min • snel: 3000 mm/min Circulaire feeds: • werkend: 0,0006 tot 0,6 tpm • snel (50-tons belasting): 0,6 tpm Nominaal koppel van longitudinale motor/bed: 9,4 mkg Nominaal koppel van cirkelmotor/tafel: 22 mkg Totaal geïnstalleerd vermogen: 50 kVA Tafelgewicht (zonder elektrische apparatuur): 31.000 kg

Condition: good (used), Year of construction: 2014, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 Lodpokwb Diofx Ab Ujhn The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Clamping force in kN 2000 Machine drive power in kw 45 Year of construction 2014 Operating hours 20209 Weight 13300kg Length 6901mm Width 2075mm Height 2240mm plus 800mm flow box Cylinder size AG1 20mm Cylinder sizeAG2 16mm _____ Designation Flow Box Type LMP 105 Manufacturer Max Petek Serial number S 140743 Year of manufacture 2014 _____ Can be purchased additionally: Krauss - Maffei MH 50 robot Designation 6 -axis: Yaskawa Type: DX 100 Operating hours approx. 8900 Year of construction 2014 The systems can be purchased complete or in individual parts Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: refurbished (used), functionality: fully functional, load capacity: 8,000 kg, table height: 1,170 mm, table width: 1,700 mm, overall weight: 8,800 kg, Equipment: documentation/manual, Extremely compact rotary tilting table by PASSERINI with a 12.5 t load capacity. Refurbished machine (new electrical system including control cabinet, mechanics overhauled, newly painted). Complete and up-to-date documentation in German with EU Declaration of Conformity. The special feature of this machine is its very low overall height (faceplate height in horizontal position only 1,170 mm) and the far-rearward center of gravity. This allows for a very short design of the front outriggers, which on standard rotary tilting tables are often longer, thereby restricting access to the component and posing a tripping hazard. Lhedexqg D Iepfx Ab Usn Please note when comparing offers that we can also ensure long-term service and spare parts availability for the used machines we offer. This machine can also be rented prior to purchase. We offer attractive financing models (independent of banks). We are also happy to handle transportation for you.

Condition: used, Year of construction: 2006, Technical details: table load: 2,2 t table diameter: 2500 mm Total power requirement: 9,6 kW max. table load: 22.000 daN / 2200kg table rotating: links/rechts Grad table - inclinable: 0 - 120 Grad table height: 1700 mm machine weight approx.: 12000 kg connected load: ca. 5,0 kVA dimensions LxWxH: ca. 4,5 x 2,5 x 2,3 m Welding positioning turn-tilt table developed and manufactured by Müller Opladen ARC KON EWeding GmbH. Machine frame solid, welded steel construction with ball-bearing tilting device Table with centering grooves and T-slots for M24 according to DIN 650. Infinitely variable rotary drive from 0.05 - 1.0 rpm. Height to center of swivel axis 1700 mm hydr. tilt adjustment, infinitely variable from 0 - 120° Lhedpou Nkx Iofx Ab Usn Drive is designed for a torque of approx. 40,000 Nm at the turntable Accessories: 1x 2-row foot switch 1x remote control 1x working platform *

Condition: good (used), gebr. dividing head with a 3 jaw Röhm chuck dia 140 mm Lodpfx Aboipic Is Ujhn

Condition: good (used), Year of construction: 2012, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Year of construction 2012 Operating hours 28828 Weight 13300kg Clamping force in kN 2000 Injection unit 230 Machine drive 45 kW drive power Length 6901mm Width 2075mm Height 2240mm Cylinder size AG1 20mm / 32mm Available Cylinder sizeAG2 25mm / 32mm Available ____ Handling Wittmann, can be purchased additionally Serial number W833PRO - 0284 Operating hours approx. 13000h Year of construction 2016 Lhedjkv Uq Iepfx Ab Uon Outfeed conveyor at the bottom Width 400mm Length 2300mm The systems can be purchased complete or in individual parts Machines already dismantled Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: refurbished (used), functionality: fully functional, load capacity: 8,000 kg, overall weight: 8,800 kg, height adjustment type: hydraulic, Equipment: documentation/manual, foot remote control, Extremely robust 3-axis rotary tipping table by TECNOMEC. Fully refurbished machine (new hydraulic pump and hoses, new electrics including control cabinet, overhauled mechanics). New paintwork upon purchase. Complete and updated documentation in German with EU Declaration of Conformity. This machine can also be rented prior to purchase. We offer attractive financing models (without bank involvement). We are happy to take care of the transport for you. Lsdpfoxqgy Aox Ab Uehn

Condition: used, Technical details: table diameter: 450 mm table height: 160 mm rotation movement: 360 Grad passage: 40 mm weight of the machine approx.: 150 kg space requirements of the machine approx.: 650x600x170 mm basis stand area: 620x420mm Lsdpfx Absu Nknco Ujhn T-slots : according to DIN 650 und 508 T-slots 8x radial, 4x163mm length and 4 x 135mm length - a=12mm - h=19mm - b=21mm - c=9mm *

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm table height: 70 mm rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm Ledpfx Aou Nkm Esb Uehn *

Condition: used, Technical details: table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg Lsdpfx Absu N Dz Ao Uehn dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm *

Condition: used, Technical details: Ledpfxou N D Ayj Ab Ushn table diameter: 450 mm rotatability of the table - manual/mechanic: 360 ° clamping table - swivable: 90° mechanisch Grad weight of the machine approx.: 100 kg dimensions: L: 800 x B: 700 x H: 400 mm The surface of the round table is scraped. Very good condition! micrometer precise locking Positioning in the 0.01 mm range T-slots according to DIN 650 radial Foot clamping 16mm (6 holes) *

Condition: used, Technical details: Lhsdpfjwf Iuysx Ab Ujn table diameter: 950 mm table height: 300 mm rotation movement: 360 Grad table - tiltable: 50 Grad transport measurements machine: 1,0 x 1,0 x 0,4 m weight of the machine approx.: K.A. kg

Condition: used, Technical details: table diameter: 300 mm Lsdpfx Abeu Nknpj Ushn table height: 250 mm rotation movement: 360 Grad passage: 40 mm swivellable: einseitig 90° ° weight of the machine approx.: 126 kg dimensions LxWxH: 0,65 x 0,52 x 0,25 m basis stand area:380x330mm T-slots: according to DIN 650 und 508 T-slots 4x163mm length and 4x 135mm length - a=12mm - h=19mm - b=21mm - c=9mm *

Condition: used, Technical details: table length: 4000 mm table width: 4000 mm table load: 100 t table adjustment - longitudinal: U-Achse: 2000 mm table rotating: B-Achse: 360 ° rapid traverse longitudinal: U-Achse: 6000 mm/min mm/min. rapid traverse:: B-Achse: 0,05 - 2 U/min U/min Rotary table The U and B axes are equipped with hydrostatic guides. Hydrostatic or bearing support : Hydrostatic support. Ø of the fifth wheel : 2.190 mm Hydraulic locks - 3 hydrostatic guideways for longitudinal movement - 1 hydrostatic circular guideway for the rotation axis Positioning system: - Heidenhain angle encoder for the B axis - Heidenhain optical scale for the U axis The servo motors, the control cabinet and a panel are not included in the scope of delivery. Lhedpfx Aju N D Tleb Usn *

Condition: used, Year of construction: 2008, Technical details: table diameter: 1000 mm table height: 75 mm max. table load: 250 kg weight of the machine approx.: 1128 kg dimensions: Aggregat: L: 1400 x B: 1000 x H: 160 mm 1-axis NC rotary table - horizontal Lsdpfxju N D A To Ab Uehn Positioning and rotary machining mode; intermittent operation with 8 star-shaped T-slots according to DIN 650: a=18H7; h=31mm; b=31mm; c=13mm x length 380mm Finished surface Overall height 250mm Turning: Rotation 360°, by means of incremental encoder, speed 2160°/min. Angular acceleration 120°/sec.²; positioning time 0.867 sec., speed max. 6 rpm, machining 1 rpm. Load on indexing plate axial max. 100kN, radial max. 115kN; Torques tangential 14,000 Nm as well as worm gear 7,000 Nm and circular machining 2,700 Nm Measuring system Heidenhain - RON 886 C type connections (2x G 1/4" and 2x G 1/8") *

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones Lhedpfx Abeu N D Rqs Usn - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250 mm table rotating: 360 ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/U total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Rotary table conventional Lhedpfou N D Szjx Ab Uon *

Condition: used, Technical details: table length: 2000 mm Lsdju N D Sbspfx Ab Uohn table width: 1700 mm table load: 15 t x-travel: längs=3000 mm table rotating: 360 motorisch ° height over floor: 1020 mm total power requirement: ca. 1,0 kw weight of the machine ca.: 14,2 t dimensions: 5,7x2,1x1,0 m The boring mill table was built in 1985 and overhauled in 2023 (retrofit) The table is mounted on a flat bed guide (5000x1380mm). The axis of rotation (B) is mounted hydrostatically, 9x T-slots according to DIN 650 and 508: a=28mm; h=54mm; b=51mm; c=21mm whose center distance = 160mm B-axis as positioning axis, which is clamped. *

Condition: used, Technical details: weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Machine table with 5 indexing tables for multi-side machining Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm Lhsdpfxju N D S Uj Ab Usn 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Actuation / drive is hydraulic *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm table rotating: 360 motorisch ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel T-Nuten nach DIN 650: a=28mm; h=49mm; b=52mm; c=21mm Lhodsu N Ebdspfx Ab Uen *

Condition: used, Year of construction: 1975, Technical details: table diameter: 320 mm table height: 50 mm rotation movement: 360 Grad passage inside table: Ø 40 mm weight of the machine approx.: 73 kg space requirements of the machine approx.: L:0,63xB:0,53xH:0,14 m Ljdpfx Abeu Nkpms Uehn round table movement via manual wheel machine operation possible T-slot: 3x long and 1 x transverse - a=18mm - b=30mm - h=29mm - c=12mm *