Used Auto Hydraulic Rotary Table Lifting Table For Robots for sale (86,682)

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Lsdpfjgd D U Eex Ab Usah Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: good (used), Translyft Rotary table scissor lift Laodpfxjulz Epe Ab Uoh Translyft 3Tonne hydraulic scissor lift with rotary table, table diameter 1300mm, mounted on weigh cells with a scale, 3Ph

Condition: used, Welding turntable - tilting turntable with hydraulic tilting motion Welding positioner with faceplate PROTARC - ZAAR & Co. Model PF-DF 3000 Serial No. 3620 Year of manufacture: 1985 Load capacity: 3,000 kg Faceplate size: Ø 1100 mm (950 x 950 mm) Faceplate rotation speed: 0.05 - 1.25 rpm Minimum speed: 1 revolution in 10 minutes (tested) Maximum speed: 1.25 revolutions in 1 minute (tested) Table tilt range: 0 - 110° Table height vertical: 1,180 mm Table height horizontal: 940 mm Welding current transmission: 800 Amp. Table drive motor power: 2.2 kW Hydraulic motor power: 1.1 kW Power supply: 380 Volt, 50 Hz Ledpjpy Uz Djfx Ab Usah - Manual control switch for faceplate rotation direction and table speed - Foot switch for clockwise/counter-clockwise rotation and stop - Hydraulic tilting function with 2 hydraulic cylinders - Speed control via frequency inverter Required space (L x W x H): 1,700 x 1,400 x 1,180 mm Weight: 1,600 kg Very good condition

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Laodpfor I E Itsx Ab Ujh Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: good (used), Year of construction: 2002, machine/vehicle number: 094-02, Offer 24377 Technical data: - max. load capacity 75 kg - Face plate diameter 500 mm Laodpeuac Ndjfx Ab Ush - Spindle shaft passage 100 mm - Face plate swivels 0 - 90 ° - Rotation electr. infinitely variable 1 - 10 rpm - Right + left rotation - E. - Foot switch - Welding current transmission approx. 350 A - Drive 230 V - Table height in horizontal position 870 mm - 3 jaw chucks 300 mm - Space requirement approx. W 750 x H 870 x D 500 mm - Weight approx. 150 kg

Condition: used, Orbital riveting machine Double riveting automatic with rotary indexing table DUNKES type DN 4 with SIEMENS control Machine No. P 81 - 5458 Year of construction 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Mounting height tool - counter tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit adjustable in the machine frame towards rotary table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with leadscrew, positioning via adjustable microswitch - Control system modernized and rotary table drive converted to servo in 2009 - New electrical control cabinet with Siemens Simatic Panel - year 2009 - Riveting time infinitely programmable - Riveting pressure continuously adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition Lajdpjdzp T Nefx Ab Uoh The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivets. The opposing riveting units rivet the pins simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair shops. Or for constructing a custom special-purpose machine.

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, Ledpeqmfv Sjfx Ab Usah 5.5 kW motors, gripper clamping system, switch cabinet

Condition: good (used), Table size:1500x1500mm Lasdpefvqmxofx Ab Uoh Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm - height: 950 mm Hydraulic lift, lifting capacity around 1 ton. Ledstddw Aepfx Ab Ueah

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Laodpsiv Irlefx Ab Ueh Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm dead weight: 65 kg good condition

Condition: used, Year of construction: 2006, Technical details: table load: 2,2 t table diameter: 2500 mm Total power requirement: 9,6 kW max. table load: 22.000 daN / 2200kg table rotating: links/rechts Grad table - inclinable: 0 - 120 Grad table height: 1700 mm machine weight approx.: 12000 kg Ljdpfx Asu Nkx Ieb Ueah connected load: ca. 5,0 kVA dimensions LxWxH: ca. 4,5 x 2,5 x 2,3 m Welding positioning turn-tilt table developed and manufactured by Müller Opladen ARC KON EWeding GmbH. Machine frame solid, welded steel construction with ball-bearing tilting device Table with centering grooves and T-slots for M24 according to DIN 650. Infinitely variable rotary drive from 0.05 - 1.0 rpm. Height to center of swivel axis 1700 mm hydr. tilt adjustment, infinitely variable from 0 - 120° Drive is designed for a torque of approx. 40,000 Nm at the turntable Accessories: 1x 2-row foot switch 1x remote control 1x working platform *

Condition: used, Year of construction: 1988, Technical details: table diameter: 500 mm table height: 150 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 110 kg dimensions: 800 x 800 x 180 mm Rotary table operation by handwheel Operation Coupling connection Ø 20 x 32mm Foot mounting: 2x clamping groove Ø 19 x29mm Lsdsu N D I Aepfx Ab Usah Equipment: 8-sided top plate, size 665mmx23mm, 3x through-holes Ø 30mm in the centre Accessories: 4x eyebolts *

Condition: used, Technical details: table diameter: 450 mm table height: 160 mm rotation movement: 360 Grad passage: 40 mm weight of the machine approx.: 150 kg space requirements of the machine approx.: 650x600x170 mm basis stand area: 620x420mm T-slots : according to DIN 650 und 508 T-slots 8x radial, 4x163mm length and 4 x 135mm length - a=12mm Laodpfx Abeu Nknco Ujh - h=19mm - b=21mm - c=9mm *

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm table height: 70 mm rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm * Ljdpou Nkm Eofx Ab Uoah

Condition: used, Technical details: table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) Lodpfeu N Dz Aex Ab Ueah -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm *

Condition: used, Year of construction: 2017, Technical details: Lifting height: 1200 mm lifting capacity in kg: 230 kg Ljdpou Nk Aysfx Ab Usah weight of the machine ca.: 0,48 t dimensions L x W x H: 2,8 x 1,0 x 2,0 m Column lift, sectional steel construction, welded, movable. -hydraulically operated -lifting category 3 -2 pieces lifting tines 1650 x 100 x 60mm, with rubber band support; locking clamp with screw clamp -floor height min./max.: 900/1020mm chassis with handrail, 2x2 wheels, 2x of them swiveling and with brake *

Condition: used, Technical details: Lifting height: 90-800 mm lifting capacity in kg: 500 kg table length: 1415 mm table width: 860 mm total power requirement: 1,1 kW weight of the machine ca.: - t dimensions L x W x H: 1,45x0,9x0,9 m transport dimensions LxWxH: 1,45x0,9x0,2 m control via panel up-and down and emergency stop Lajdeu Nk Amopfx Ab Ueh hydraulic make HAWE connected via bayonet connection, volume flow 1,14 l/min with 400 bar pressure *

Condition: used, Technical details: table diameter: 450 mm rotatability of the table - manual/mechanic: 360 ° clamping table - swivable: 90° mechanisch Grad Lsdju N D Ayjpfx Ab Uoah weight of the machine approx.: 100 kg dimensions: L: 800 x B: 700 x H: 400 mm The surface of the round table is scraped. Very good condition! micrometer precise locking Positioning in the 0.01 mm range T-slots according to DIN 650 radial Foot clamping 16mm (6 holes) *

Condition: used, Technical details: Laedpfxewf Iuye Ab Ueh table diameter: 950 mm table height: 300 mm rotation movement: 360 Grad table - tiltable: 50 Grad transport measurements machine: 1,0 x 1,0 x 0,4 m weight of the machine approx.: K.A. kg

Condition: used, Technical details: table diameter: 300 mm table height: 250 mm Lodpfxju Nknpo Ab Usah rotation movement: 360 Grad passage: 40 mm swivellable: einseitig 90° ° weight of the machine approx.: 126 kg dimensions LxWxH: 0,65 x 0,52 x 0,25 m basis stand area:380x330mm T-slots: according to DIN 650 und 508 T-slots 4x163mm length and 4x 135mm length - a=12mm - h=19mm - b=21mm - c=9mm *

Condition: used, Technical details: table length: 4000 mm table width: 4000 mm table load: 100 t table adjustment - longitudinal: U-Achse: 2000 mm Lasdpfxou N D Tlo Ab Ush table rotating: B-Achse: 360 ° rapid traverse longitudinal: U-Achse: 6000 mm/min mm/min. rapid traverse:: B-Achse: 0,05 - 2 U/min U/min Rotary table The U and B axes are equipped with hydrostatic guides. Hydrostatic or bearing support : Hydrostatic support. Ø of the fifth wheel : 2.190 mm Hydraulic locks - 3 hydrostatic guideways for longitudinal movement - 1 hydrostatic circular guideway for the rotation axis Positioning system: - Heidenhain angle encoder for the B axis - Heidenhain optical scale for the U axis The servo motors, the control cabinet and a panel are not included in the scope of delivery. *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250 mm table rotating: 360 ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/U Lasdpfju N D Szjx Ab Uoh total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Rotary table conventional *

Condition: used, Year of construction: 2008, Technical details: table diameter: 1000 mm table height: 75 mm max. table load: 250 kg weight of the machine approx.: 1128 kg dimensions: Aggregat: L: 1400 x B: 1000 x H: 160 mm 1-axis NC rotary table - horizontal Positioning and rotary machining mode; intermittent operation with 8 star-shaped T-slots according to DIN 650: a=18H7; h=31mm; b=31mm; c=13mm x length 380mm Finished surface Overall height 250mm Turning: Rotation 360°, by means of incremental encoder, speed 2160°/min. Angular acceleration 120°/sec.²; positioning time 0.867 sec., speed max. 6 rpm, machining 1 rpm. Load on indexing plate axial max. 100kN, radial max. 115kN; Torques tangential 14,000 Nm as well as worm gear 7,000 Nm and circular machining 2,700 Nm Measuring system Heidenhain - RON 886 C type connections (2x G 1/4" and 2x G 1/8") * Ledpou N D A Tofx Ab Uoah

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm Lajdpfx Aou N D Rqob Ujh - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: used, Year of construction: 1975, Technical details: table diameter: 320 mm table height: 50 mm rotation movement: 360 Grad passage inside table: Ø 40 mm weight of the machine approx.: 73 kg space requirements of the machine approx.: L:0,63xB:0,53xH:0,14 m round table movement via manual wheel Ljdpfx Abou Nkpme Usah machine operation possible T-slot: 3x long and 1 x transverse - a=18mm - b=30mm - h=29mm - c=12mm *