Used Tilt Table for sale (18,620)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport - tilting table (discharge) Description of Line Components Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulkollan transport rollers. In vertical position transport rollers with Perbunan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with Bedpjwii Hfjfx Aafscu 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency-controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Transport rollers, which are individually driven by worm gear wheels are placed on a solid welded frame. The transport rollers are arranged in drag bearings. Tilting arms are in horizontal position. The integrated tilting table is made of several profile arms which can be tilted (electro-mechanical by crank mechanism) from the horizontal position by 84°. The tilting speed has its lowest speed at the beginning and at the end of the movement. The glass is tilted from vertical to the horizontal position. If no glass happens to be in the Pre-Heating oven the glass runs into the oven.

Condition: new, Year of construction: 2026, Premium-class welding turn and tilt table with through hollow shaft - available in conventional or PLC-controlled versions Rated load capacity: 200 kg Faceplate diameter: 400 mm Hollow shaft passage: 80 mm Tilting range: up to 135° Faceplate rotation speeds: 0.4 to 4 rpm, steplessly adjustable or programmable Maximum welding current transmission: 400 amps at 60% duty cycle Drive power: 900 watts Weight without control unit: 105 kg Equipped with: - Portable control unit with safety dual foot pedal and control console with emergency stop - Rotary potentiometer - Switch for forward and reverse rotation Bcjdpfoyf U T Uox Aafju - Switch for slow/fast operation - Switch for rotation with or without welding

Condition: used, Year of construction: 2012, functionality: fully functional, milling spindle length: 130 mm, height adjustment type: mechanical, table length: 2,070 mm, type of input current: three-phase, spindle diameter: 30 mm, spindle speed (max.): 10,000 rpm, extraction connection diameter: 100 mm, input voltage: 400 V, rotational speed (min.): 3,500 rpm, rotational speed (max.): 10,000 rpm, working length of spindle: 130 mm, Equipment: motor brake, – Year of manufacture: 2012 – Austrian production – Spindle adjustable from 0° to 45° – Sliding table for tenoning operations – CE marking TECHNICAL SPECIFICATIONS: – Spindle diameter: 30 mm – Spindle height: 130 mm – Maximum tool diameter (allows use of large milling tools): 230 mm – Maximum tool diameter at 45°: 125 mm – 4 spindle speeds: 3500 / 6500 / 8000 / 10000 rpm – Main motor power: 5.5 kW – Electric motor with brake – Table dimensions (L x W): 780 x 970 mm – Sliding table dimensions (L x W): 2070 x 350 mm – "x-Roll" sliding table – Manual height adjustment – Manual angle adjustment: 0° - 45° – Quick-change spindle system – Fence on carriage – Additional table on carriage – Right/left rotation – Extraction port diameters: 100 and 80 mm – Transport dimensions (L/W/H): 220 x 90 x 150 cm Bcsdpfoycqiysx Aafju – Weight: approx. 350 kg

Condition: good (used), Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Tiltable: 90° Dimensions LxWxH, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg Item no.: WW12214 Bcsdpfod Tticox Aafou

Condition: used, Year of construction: 1990, Expert Eda450 Size of table plate 450 mm weight of the machine ca. 380 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Bedpfjf Nlrqex Aafocu +++++

Year of construction: 1980, condition: reconditioned (used), Universal - swivel - tilting table for MAHO MH 1000 Bodpofx Aipjfx Aafocu clamping surface: 1050 mm x 630 mm The universal - swivel - tilting table is in a good condition !

Condition: used, Year of construction: 1979, Fixed angle table for MAHO 800 P Bjdpfxjx E Tfks Aafecu

Condition: good (used), Year of construction: 2006, functionality: fully functional, A total of 8 rotary collection tables are for sale. All are from Ruchser. Sold due to discontinuation of production. Bcodsx U Dkispfx Aafju

Condition: good (used), Year of construction: 1986, machine/vehicle number: 205891, Offer 25396 Technical Specifications: - Load capacity: 250 kg - Faceplate diameter: 600 mm - Table height in horizontal position: 910 mm - Faceplate continuously tiltable by hand crank - Faceplate rotational speed electrically variable: 0.2 – 2 rpm - Welding current transmission: 300 A - Drive: 220 V - Right and left rotation - Electric foot switch - Space requirement: approx. W 800 x H 910 x D 1,200 mm Bedpfx Aox Tqbloafjcu - Weight: approx. 150 kg

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Equipment: foot remote control, 3000 kg load capacity welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 rpm Rotary table diameter 1400mm Inclination up to 120° Height horizontal 1300mm, tilted to the middle 1050mm Bodpjv En U Ijfx Aafecu Length 2.0 m x width 1.4 m Handheld remote control with digital display and double foot remote control

Condition: used, Pneumatic tilting roller table 1500x2000x900mm Pneumatically tiltable roller table, stand. Size: 1500 x 200 x 900mm The height of the table in the open state: 1850 mm Bedpfouglrzjx Aafecu

Year of construction: 2022, condition: excellent (used), ROTOX tilting table in as-new condition, including rails, transport table, and control cabinet Bodox Dy S Sspfx Aafscu

Condition: good (used), Year of construction: 2021, total length: 4,500 mm, total width: 1,200 mm, total height: 2,300 mm, Make Polyglass Type: LV160-CX R-L Info: R-L H-1600 mm Sealing table Tilting table Dimension L 8500 x D 1200 x H 2300 mm Bodpfxox Dtike Aafjcu

Condition: good (used), Machine table Type: Turn-tilt and swivel table Origin: probably WMW or TOS milling machine Size: 800 x 240 mm Clamping surface: 700 x 240 mm Number of clamping grooves: 5 Clamping groove width: 12 / 20 mm Bsdpfx Aaeva D Tijfscu Clamping groove depth: 13 / 22 mm Stop surface: 320 x 200 mm Features: can be rotated, tilted and swiveled Dimensions: 800 x 250 x 300 mm Weight: 67 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, load capacity: 600 kg, 260/220 bar Bjdpfxswrr Aho Aafecu The Flexlift FCE1000 is a versatile lift table with an integrated tilting function, which is perfect for a wide range of industrial applications. It enables precise lifting, lowering, and tilting of loads, making work processes more efficient, ergonomic, and safe. The robust and stable design ensures high durability and reliable performance in daily use. Thanks to its user-friendly operation, the lift table can be quickly integrated into existing production processes, making it a practical solution for demanding lifting and positioning tasks.

Condition: good (used), Year of construction: 2005, functionality: fully functional, load capacity: 600 kg, 260/220 bar The Flexlift FCE1000 is a versatile lift table with an integrated tilting function, ideal for a wide range of industrial applications. It enables precise lifting, lowering, and tilting of loads, making work processes more efficient and ergonomic. The robust design ensures high stability and durability, while the simple operation allows for quick integration into existing production flows. Bodpswrr N Iofx Aafjcu

Condition: good (used), Year of construction: 2008, functionality: fully functional, load capacity: 1,000 kg, 250 bar Bcedpfswtd Dtex Aafou The Flexlift FCE1000 is a versatile lift table that features an integrated tilting function, providing a flexible solution for a wide range of industrial tasks. It allows loads to be lifted, lowered, and tilted precisely to the desired angle, making workflows significantly more efficient, ergonomic, and safe. Its robust and stable construction ensures long service life and reliable performance in daily operations.

Condition: good (used), Year of construction: 2014, machine/vehicle number: U 000984, Offer 25355 Hydraulic Positioner – Welding Rotating and Tilting Table Technical Data approx.: - Max. load capacity approx.: 7,000 kg - Faceplate diameter approx.: 1,650 mm - Faceplate hydraulically tiltable - Hydraulic height adjustment of the faceplate - Min./max. table height in horizontal position: approx. 1,290 / 2,100 mm - Rotation electrically powered with clockwise and counterclockwise operation - Electric foot switch for clockwise/counterclockwise operation Bodpexv Shiefx Aafjcu - Electric controller for rotation speed, clockwise/counterclockwise rotation, lift/lower, tilt - Drive: 400 V / 6 kW - Required space approx.: W 4,000 x H 1,300 x D 2,000 mm - Weight approx.: 7,500 kg

Condition: refurbished (used), functionality: fully functional, load capacity: 8,000 kg, table height: 1,170 mm, table width: 1,700 mm, overall weight: 8,800 kg, Equipment: documentation/manual, Extremely compact rotary tilting table by PASSERINI with a 12.5 t load capacity. Refurbished machine (new electrical system including control cabinet, mechanics overhauled, newly painted). Complete and up-to-date documentation in German with EU Declaration of Conformity. Bsdpfoxqg D Isx Aafscu The special feature of this machine is its very low overall height (faceplate height in horizontal position only 1,170 mm) and the far-rearward center of gravity. This allows for a very short design of the front outriggers, which on standard rotary tilting tables are often longer, thereby restricting access to the component and posing a tripping hazard. Please note when comparing offers that we can also ensure long-term service and spare parts availability for the used machines we offer. This machine can also be rented prior to purchase. We offer attractive financing models (independent of banks). We are also happy to handle transportation for you.

Condition: refurbished (used), functionality: fully functional, load capacity: 8,000 kg, overall weight: 8,800 kg, height adjustment type: hydraulic, Equipment: documentation/manual, foot remote control, Extremely robust 3-axis rotary tipping table by TECNOMEC. Fully refurbished machine (new hydraulic pump and hoses, new electrics including control cabinet, overhauled mechanics). New paintwork upon purchase. Complete and updated documentation in German with EU Declaration of Conformity. This machine can also be rented prior to purchase. We offer attractive financing models (without bank involvement). We are happy to take care of the transport for you. Bedpfsxqgy Aex Aafecu

Condition: used, Year of construction: 1997, Support rollers can be swiveled 360°. External dimensions when table is tilted: Height 2570 mm, width 4100 mm, depth 1700 mm. Dimensions of table when horizontal: Width 4100 mm, depth 2300 mm, height approx. 900 mm. Condition: good, second-hand Bcjdexpntzjpfx Aafou

Condition: used, Year of construction: 1979, Operated via foot switch. Pneumatic lifting cylinder. System from ongoing production. Working height, horizontal: 790 mm. Width: 3500 mm. Depth: 2250 mm. Bcjdpfxjxpnr Re Aafju

Condition: good (used), Table with grinding device (edge delamination) and two integrated breaking strips. Bodpfxsxnl Sfs Aafocu Width: 3700 mm Depth: 2430 mm Height: 970 mm Weight approx. 1500 kg

Condition: used, Universal swivel-tilt-rotary table DECKEL type FVW, suitable for FP 2 or FP 3 (Deckel no. 62473). Table size: 700 x 240 mm. Swivel range: +/- 30° in all directions. Weight: approx. 90 kg. Bcedpfxjxcilro Aafou

Condition: used, machine/vehicle number: 2414-0075 bzw. 2314-0703, table clamping surface: 520 x 1000 mm 6 clamping grooves: 16 mm groove spacing: 90 mm Clamping plate horizontally rotatable to the right and left by: 45° each tiltable from/to the machine by: 15° each swivelling to the right and left: 15° each permissible load movable approx.: 1000 kg permissible load rigid table approx.: 1500 kg Bjdpjb Hmbpofx Aafscu weight: 376 kg Suitable for milling machines DECKEL: FP 3 L; FP 3 LG; FP 3 LV