Used Rotary Welding Table for sale (22,289)

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Kjdpfofvqmxox Ahveww Hydraulic

Condition: new, table diameter 715 mm table load 500 kg Frontal Loading Center (A) 150 mm Kedpfx Aoyv Nxzshveww Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1 UpM T-slots 6 x M16 Tilt Angle 90-180-110 ° Tilting Speed 30 sn min./90° weight of the machine ca. 675 kg

Condition: new, table diameter 1300 mm table load 7.000 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 0,9 UpM T-slots 6 x M24 Tilt Angle 90-180-100 ° Tilting Speed 30 sn min./90° weight of the machine ca. 3.050 kg Kedpfoyv Nq Dsx Ahveww

Condition: new, table diameter 960 mm table load 3.500 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 0,9 UpM Kodpfxeyv Ng Se Ahvsww T-slots 6 x M20 Tilt Angle 70-90-180 ° Tilting Speed 30 sn min./90° weight of the machine ca. 1.500 kg

Condition: new, table diameter 900 mm table load 1.000 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1,1 UpM T-slots 6 x M16 Tilt Angle 90-180-105 ° Tilting Speed 30 sn min./90° dimensions 2100x920x1100 mm weight of the machine ca. 930 kg Kwodpfx Ahoyv I Risvew

Condition: good (used), Year of construction: 2012, machine/vehicle number: 1205277, Offer 23345 Technical Data: - Max. load capacity: 1000 kg - Faceplate diameter: 1000 mm - Min. table height in horizontal position approx.: 600 mm - Max. table height in horizontal position approx.: 1400 mm - Working height manually adjustable in 3 stages - Faceplate motorized rotatable - Faceplate manually tiltable/inclinable + height adjustment Kedsyuydqopfx Ahvsww - Rotation electrically steplessly adjustable approx. 0.01 – 1.0 rpm - Clockwise and counterclockwise rotation - Welding current transfer approx.: 500 A - Drive: 400 V - Connected load: 0.75 kW - Hand remote controller for speed - Electric foot switch - Required space approx.: W 1300 x H 600 x D 1000 mm - Weight approx.: 500 kg

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 5010 € 96.69 € 100 kg 150 mm 150 mm 360 ° Kwodpfx Ahox Urqwevow 120 kgm 230 / 50 V / Hz 0.25 kW 0.25 kW 0.1 - 3 U/min 30 s 350 mm M12x6 mm 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 24400 € 468.48 € 3000 kg 150 mm 150 mm 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW 1.1 kW 1200 mm 700 - 950 mm Kwedpfox Urqdox Ahvow The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Condition: new, Year of construction: 2025, neu 2025 020157 prompt, Zwischenverkauf v Türkei 6320 € 121.98 € 1 250 kg Kwodjyq St Njpfx Ahvsw 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 11000 € 211.2 € Kodpfx Asyq St Ajhveww 1000 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.55 kW 0.75 kW 0.1 - 3 U/min 60 s 1200 mm M20X6 mm 1000 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 7730 € 149.19 € 500 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.37 kW 0.37 kW 0.1 - 3 U/min 45 s 800 mm M20X6 mm 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Kedpfeyq Stvex Ahvoww Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: good (used), – Capacity: unknown – Infinitely variable speed – Height adjustable – Tiltable – With three-jaw chuck – Foot pedal – 230V Kwodow Ttxlepfx Ahvew

Condition: good (used), Year of construction: 1985, machine/vehicle number: 5028830, Offer 26070 Kedpfx Ahjyrfxbovsww Technical Data: - Max. load capacity in horizontal position: 7500 kg - Faceplate dimensions: 1500 x 1500 mm - Motorized tilting of the faceplate: 0 – 120° - Rotational movement electrically adjustable, stepless: 0.0028 – 1.04 rpm - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V x 25 kW - Table height in horizontal position: approx. 1600 mm - Handheld remote control - Required space approx. W 2000 x H 1600 x D 2450 mm - Weight approx. 5500 kg

Condition: excellent (used), functionality: fully functional, load capacity: 4,000 kg, Severt manual column lift and rotation device, including matching perforated table 1500 x 1500 x 200 mm for bolting, included. Optionally available with tooling for perforated table accessory set. Excellent condition (see video). Hydraulically height adjustable, minimum 800 mm, maximum 2400 mm. Load capacity 4000 kg. Perforated table 1500 x 1500 x 200 mm, type 28 mm. Ksdpfxjyli Uyo Ahveww

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt Kjdsxabm Nspfx Ahvjww weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° Ksdsxabl Sspfx Ahveww - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad Kjdpfjxaatnsx Ahvjww turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg Kwsdexaafqepfx Ahvow turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, table diameter 180 mm 10 Kg 5 Kg chucking diameter 65 mm turning speeds 2 - 20 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 18 Kg dimensions of the machine ca. 300 x 300 x 300 m welding turntable with Kwsdpfx Aji Hg Iyehvsw - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt Kodpfefv Aykjx Ahveww weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, Column lift rotary device 1 tonne load capacity Protec turning device / positioner Syncrolift Double column, remote control wireless and manual Column adjustment: 2x movable Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm Clamping plate diameter: 500 mm Rotary drive: 0.37 kW Kedpfx Ahjx Th N Hevoww Upon request, 2 to 10 tonne load capacities available

Condition: new, Year of construction: 2026, Top quality made from high-strength structural steel Q355, including plasma nitriding and calibration. 3D perforated table 4000 x 2000 x 200mm, 100mm grid, plate thickness 20mm, hole diameter 28mm. Surface finish machined, very robust, weight approx. 2400 kg. With table base, adjustable in 8 positions. Price excludes accessory set, surcharge €500. Packed in a wooden crate, shipping on request. The stated price refers to the table in standard version without plasma nitriding (last 4 pictures). Price for high-strength steel Q355, stainless and impact-resistant including plasma nitriding: surcharge €1800 (as shown). Kwedpfx Ahoyg Ex Dsvjw

Condition: used, Year of construction: 2006, Technical details: table load: 2,2 t table diameter: 2500 mm Total power requirement: 9,6 kW max. table load: 22.000 daN / 2200kg table rotating: links/rechts Grad table - inclinable: 0 - 120 Grad table height: 1700 mm machine weight approx.: 12000 kg connected load: ca. 5,0 kVA dimensions LxWxH: ca. 4,5 x 2,5 x 2,3 m Welding positioning turn-tilt table developed and manufactured by Müller Opladen ARC KON EWeding GmbH. Machine frame solid, welded steel construction with ball-bearing tilting device Table with centering grooves and T-slots for M24 according to DIN 650. Infinitely variable rotary drive from 0.05 - 1.0 rpm. Height to center of swivel axis 1700 mm hydr. tilt adjustment, infinitely variable from 0 - 120° Kwodeu Nkx Iepfx Ahvew Drive is designed for a torque of approx. 40,000 Nm at the turntable Accessories: 1x 2-row foot switch 1x remote control 1x working platform *

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm Kwodpfonr E Enox Ahvsw All together in an enclosure with safety door. Plant can still be visited in operation.

Condition: used, Jaw chuck different versions Kwsdpfjb I Sdxjx Ahvjw from 300mm to 500mm