Used Manual Rotary Table for sale (28,438)

Condition: like new (used), Year of construction: 2014, functionality: fully functional, UNUSED GSA T320 CNC Tilting and rotating table. Full specification on request. Item in new condition having never been used. Available now.. Contact us for further information. Nledpfxexy Iq Uo Afasa

Condition: repair required (used), Year of construction: 2002, Welding robot with 6 axes Rotary table for workpiece holding 6th axis defective KPS module defective Njdpoywlgkefx Afaela

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Nedpfxscblc Se Afasla Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: used, machine/vehicle number: 2414-0075 bzw. 2314-0703, table clamping surface: 520 x 1000 mm Nsdpfjb Hmbpjx Afajla 6 clamping grooves: 16 mm groove spacing: 90 mm Clamping plate horizontally rotatable to the right and left by: 45° each tiltable from/to the machine by: 15° each swivelling to the right and left: 15° each permissible load movable approx.: 1000 kg permissible load rigid table approx.: 1500 kg weight: 376 kg Suitable for milling machines DECKEL: FP 3 L; FP 3 LG; FP 3 LV

Condition: used, with mounted three-jaw chuck table-Ø: 200 mm bore approx.: 18 mm overall height: 100 mm total height with chuck: 165 mm width: 270 mm Nljdsda I Rvepfx Afaea length: 320 mm

Condition: used, machine/vehicle number: 7173, Platform Ø: 1500 mm Winding height approx.: 1800 mm Nedpfocg Rn Uox Afaola Reception length for the winding rolls: 400 mm drive motor: 380 V space requirement: 2400 x 1500 x 2100 mm

Condition: ready for operation (used), Horizontal rotary table, manually operated Nodpfxowx H Irj Afaela Bore diameter: 145 mm Including 3 inwardly stepped jaws Space required: 500 x 500 x 300 mm

Condition: ready for operation (used), Outside Ø: 350 mm Bore: 40 mm Construction height: 115 mm Nledpfx Ajg Hzazsfaja including three-jaw chuck AROWA, 250 mm Ø, bore: 75 mm Total weight:

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, Column lift rotary device 1 tonne load capacity Protec turning device / positioner Syncrolift Double column, remote control wireless and manual Column adjustment: 2x movable Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Njdpfx Aex Th N Hjfaela Speed: 1 rpm Clamping plate diameter: 500 mm Rotary drive: 0.37 kW Upon request, 2 to 10 tonne load capacities available

Condition: new, table diameter 715 mm table load 500 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1 UpM T-slots 6 x M16 Njdoyv Nxzspfx Afajla Tilt Angle 90-180-110 ° Tilting Speed 30 sn min./90° weight of the machine ca. 675 kg

Condition: new, table diameter 900 mm table load 1.000 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1,1 UpM T-slots 6 x M16 Tilt Angle 90-180-105 ° Tilting Speed 30 sn min./90° Nedpfx Afeyv I Risasla dimensions 2100x920x1100 mm weight of the machine ca. 930 kg

Condition: ready for operation (used), Table diameter: 250 mm Nljdpfjyv D Ahex Afaoa Table height: 105 mm

Condition: used, table diameter 790 mm table load 500 Kg swivelling range 0 - 135 Grad turning speeds max. 2,0 U/min connected load frequency 400 V weight 0,95 t Dimensions (LxWxH) 1,4 x 0,8 x 1,5 m Welding turntable incl. - Control column with foot switch Njdpfx Aoyx Ip Rjfaola - 630mm chuck - Chuck key

Year of construction: 1994, condition: used, workpiece diameter 350 mm workpiece weight 99999 kg workpiece height 240 mm total power requirement 7,5 kW weight of the machine ca. 2 t Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Mit komplett neuem Schaltschrank und neuer Steuerung mit BEMA Schleifsoftware Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während des Schleifprozesses) Hierdurch werden Schleifzeiten reduziert und Abrichtzeiten eingespart. Der Abrichtbetrag wird automatisch kompensiert. Automatische Antasteinrichtung AT-R: bietet die Möglichkeit, mit der Schleifscheibe das Werkstück schnell und automatisch anzufahren. CNC-Steuerung mit höchstem Programmierkomfort Unterschiedliche Schleifprogramme für -Pendelschleifen -Kurzhubschleifen -Einstechschleifen -jeweils eine oder mehrere Flächen in gleicher Nlodpsxbtl Tofx Afaja oder unterschiedlicher Höhe Ins Schleifprogramm integrierte Abrichtzyklen -Tischabrichten mit Einzeldiamant -Automatisch Geradabrichten -CD-Abrichten mit AF65 Minizyklen: -automatisches Antasten an das Werkstück -Positionieren einzelner Achsen -Abrichten Einsatzgebiet: Hochgenaue Planschleifarbeiten in der Mittel- und Großserienproduktion bzw. Einzelteilfertigung in zentrischer Aufspannung

Year of construction: 2015, condition: used, workpiece diameter 300 mm Nsdpfx Aoxflclofasla workpiece weight 999 kg workpiece height 145 mm Features: -Digital display vertical axis -Automatic feed -Programmable automatic end stop -Grinding spindle drive with infinitely variable electronic speed control -Infinitely variable cross feed and table rotation -24V magnetic clamping plate 300 mm -Various occupational safety devices, e.g. protective cover monitoring, operating status display via traffic light -Lubricating oil level monitoring -The machine was completely overhauled in 2015, at which time the entire electrical system was replaced with PLC control and 24V control voltage -Paper belt filter system specially designed for this machine The following work has now been carried out: -Replacement of bellows and belts -New bearings for grinding spindle -Grinding carriage bed and rotary table bed scraped by hand to restore better and more precise running characteristics -Grinding carriage and cross table lifted from machine body and all tracks cleaned, lubrication checked -Various wear parts, such as rubber caps and switching elements, replaced -Detailed functional check -Modernisation of feed arm -Paint touch-up work, machine colour: light grey RAL 7035 and RAL 7012

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Vertical work load 100 Kg Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Timing 2:1 incl. Tailstock MK 4 incl. Driver incl. Cable   Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Nledpoyu Nb Eefx Afaoa Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Height: 400mm Weight: 240kg

Year of construction: 1980, condition: good (used), Equipment: 4 horiz. Pinol drilling units, 3 vert. Pinol drilling units rotary table diameter: 400 mm rotary indexing table: 60° pitch weight: 2,6 to 1 switch cabinet Nljdponvdmwofx Afasa 1 coolant tank

Year of construction: 2020, condition: new, Hydraulically height-adjustable tilt and turn table Maximum load: 2.500kg faceplate diameter: 1.200 mm Nedpfx Afsd H Hzbjaela Stroke:1,050 mm

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 7,500 kg, total length: 3,134 mm, total width: 1,738 mm, type of input current: three-phase, rotary table diameter: 1,200 mm, overall weight: 3,000 kg, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable rotary tilting table Maximum load: 7,500 kg Nlsdpfx Ast Hfrcjfaoa Face plate diameter: 1,200 mm Height of faceplate: 900mm-2,084 hydraulic Height of 90° tilted faceplate: 710mm-1,894mm Tilting range: 135° hydraulic Faceplate speed: 0.04-1 rpm electromotive Operation: Manual remote control and two-pedal foot switch

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 20,000 kg, total length: 4,750 mm, total width: 2,600 mm, type of input current: three-phase, rotary table diameter: 2,500 mm, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable turn/tilt table Maximum load: 20,000kg (permitted center of gravity 700mm) Torque: 30.000Nm Face plate diameter: 2,500 mm Nedjt Hgmuspfx Afaola Height of faceplate: 1,326mm-2,641 hydraulic Height of 90° tilted face plate: 1,045mm-2,360mm Tilting range: 135° hydraulic Faceplate speed: 0.1-2 rpm electromotive Operation: manual remote control

Condition: used, Year of construction: 2011, machine/vehicle number: JP - 0160201, Motorized welding and tilting table with height adjustment Ref. No. 26069 Technical Data: - Max. load capacity in horizontal position: 15,000 kg - Faceplate diameter: 1,800 mm - Faceplate motor-driven tiltable: 0 to 120° - Table height adjustable - Rotational movement electrically, steplessly adjustable: 0.04 to 0.80 rpm - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V / 5.5 + 7.5 kW - Minimum table height in horizontal position: approx. 1,700 mm - Intermediate table heights in horizontal position: approx. 1,900 + 2,100 mm - Maximum table height in horizontal position: approx. 2,300 mm - Handheld remote control - Required installation space: approx. W 2,100 x H 1,700 x D 2,400 mm - Weight: approx. 8,500 kg Nljdpfx Afjywtt Ssaja

Year of construction: 1964, condition: excellent (used), Description to follow! Nsdpsytg U Tefx Afajla

Condition: not inspected (used), functionality: unexamined, overall weight: 70 kg, table diameter: 250 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Table diameter: 250 mm MACHINE DETAILS Nljdpfxjyr Nk Ie Afaoa Dimensions & Weight Dimensions (L x W x H): 500 x 330 x 200 mm Weight: 70 kg External reference: Lot 74

Condition: new, Year of construction: 2026, Top quality made from high-strength structural steel Q355, including plasma nitriding and calibration. 3D perforated table 4000 x 2000 x 200mm, 100mm grid, plate thickness 20mm, hole diameter 28mm. Surface finish machined, very robust, weight approx. 2400 kg. With table base, adjustable in 8 positions. Price excludes accessory set, surcharge €500. Packed in a wooden crate, shipping on request. The stated price refers to the table in standard version without plasma nitriding (last 4 pictures). Price for high-strength steel Q355, stainless and impact-resistant including plasma nitriding: surcharge €1800 (as shown). Nlodpfxoyg Ex Ds Afaea

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 5010 € 96.69 € Nedpfx Afox Urqwsasla 100 kg 150 mm 150 mm 360 ° 120 kgm 230 / 50 V / Hz 0.25 kW 0.25 kW 0.1 - 3 U/min 30 s 350 mm M12x6 mm 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement