Engel INSERT 330H/90 (2004) vertical rotary table 1100mm

Engel INSERT 330H/90

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection Ijdpfexayl Dsx Ahvotd - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm) Itodsud N Hdepfx Ahved  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, Steel construction for crane system Width: approx. 8,5 m Length: approx. 7,95 m Plant dismantled The plant is sold "as is". Viewing: You are cordially invited to view the item - simply contact us and arrange an appointment at short notice. Itsdpfx Ahjbruzgevjd Attention: no guarantee, no exchange, no return possible.

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Iodpfx Ahoh Nypfevjtd

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 7,900 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 7,850 h, laser power: 3,200 W, punching diameter: 76 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, foot remote control, fume extraction, nozzle changer, quick-change device, safety light barrier, Laser TruFlow 3200, including LensLine with optimized standby Nozzle changing device Multitool drive system "Multishear" function "Multibend" function Tapping function High-speed "Marking" / "Ribbing" function Engraving function Rolling and deburring function Softpunch function Iodpfxex N Hyvj Ahvstd Active Die Stripline Repositioning with pneumatic cylinders Vibration-dampened installation Chip conveyor with container Ball table work surface with brush inserts Blowing device SheetMaster (3000 x 1500) Automatic sheet separation system with lateral air blast Additional positioning guides for sheet size (2500 x 1250) Additional positioning guides for sheet size (2000 x 1000) Discharge control device GripMaster (3000 x 1500) Double trolleys with toothed belt drive (3000 x 1500) Loading and unloading unit Good part conveyor on punching side Good part conveyor on laser side Warehouse interface No. 21 RTC toolboxes incl. die holder plate

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 16380, CNC automatic lathe CITIZEN CINCOM L-20 VIII with Fedek STM-326 bar feeder, year 2008. Machine is fully controlled by Citizen. Supplied with geometric protocol. Iodpfx Aew T Stzehvotd

Year of construction: 2001, condition: ready for operation (used), Max. cutting force: 220kN, laser power: 3200W, nitrogen connection: 30bar, oxygen connection: 20bar, connected load: 76kVA, operating hours at the beginning of 2025: 67,766h, with Trumpf TLF 3200 laser and RIEDEL L 15/21 TR3/19.00 cooler, refrigerant: R134a, filling weight: 11.5kg, high pressure: 20.2bar. Tools additionally available. An on-site inspection is possible. Itedpfjw Uk A Rex Ahved

Condition: excellent (used), Year of construction: 2005, Arburg 370S-800-150 Closing 80 TO Scrow 30 mm Bar spacing 37x37 Control S Year 2005 Operating hours 46201 ST Itedpfx Ajidmc Ishvsd Plus sprue picker

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm Itodpjlp Uz Rjfx Ahvjd total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Year of construction: 1993, condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Itsdpjvb Hbfjfx Ahvsd