Used Manual Rotary Table for sale (29,068)

Condition: used, Technical details: table diameter: 950 mm table height: 300 mm rotation movement: 360 Grad table - tiltable: 50 Grad transport measurements machine: 1,0 x 1,0 x 0,4 m weight of the machine approx.: K.A. kg Ffjdpfx Ajwf Iuysa Esw

Condition: used, Technical details: table diameter: 300 mm table height: 250 mm rotation movement: 360 Grad passage: 40 mm Ffedju Nknpspfx Aa Eew swivellable: einseitig 90° ° weight of the machine approx.: 126 kg dimensions LxWxH: 0,65 x 0,52 x 0,25 m basis stand area:380x330mm T-slots: according to DIN 650 und 508 T-slots 4x163mm length and 4x 135mm length - a=12mm - h=19mm - b=21mm - c=9mm *

Condition: used, Technical details: table length: 4000 mm Ffjdpfx Asu N D Tlja Ejw table width: 4000 mm table load: 100 t table adjustment - longitudinal: U-Achse: 2000 mm table rotating: B-Achse: 360 ° rapid traverse longitudinal: U-Achse: 6000 mm/min mm/min. rapid traverse:: B-Achse: 0,05 - 2 U/min U/min Rotary table The U and B axes are equipped with hydrostatic guides. Hydrostatic or bearing support : Hydrostatic support. Ø of the fifth wheel : 2.190 mm Hydraulic locks - 3 hydrostatic guideways for longitudinal movement - 1 hydrostatic circular guideway for the rotation axis Positioning system: - Heidenhain angle encoder for the B axis - Heidenhain optical scale for the U axis The servo motors, the control cabinet and a panel are not included in the scope of delivery. *

Condition: used, Technical details: table load: 3 t table diameter: 1280 mm table rotating: 0-180 Grad table - inclinable: nein / no Grad machine weight approx.: 1,376 kg dimensions LxWxH: 1,4 x 1,7 x 0,18 m positioning rotary table Load capacity tested up to 3 tons. Currently operates in 2 positions at 180 degrees. Can be modified up to a maximum of 270°. Fjdpfexz E Exox Aa Ejfw *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250 mm table rotating: 360 ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/U total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Rotary table conventional * Fodpfx Aaeu N D Szj Esfw

Condition: used, Year of construction: 1975, Technical details: table diameter: 320 mm table height: 50 mm rotation movement: 360 Grad Ffsdpfx Aju Nkpmja Eow passage inside table: Ø 40 mm weight of the machine approx.: 73 kg space requirements of the machine approx.: L:0,63xB:0,53xH:0,14 m round table movement via manual wheel machine operation possible T-slot: 3x long and 1 x transverse - a=18mm - b=30mm - h=29mm - c=12mm *

Condition: used, Technical details: table length: 2000 mm table width: 1700 mm table load: 15 t x-travel: längs=3000 mm table rotating: 360 motorisch ° height over floor: 1020 mm total power requirement: ca. 1,0 kw weight of the machine ca.: 14,2 t dimensions: 5,7x2,1x1,0 m The boring mill table was built in 1985 and overhauled in 2023 (retrofit) The table is mounted on a flat bed guide (5000x1380mm). The axis of rotation (B) is mounted hydrostatically, 9x T-slots according to DIN 650 and 508: a=28mm; h=54mm; b=51mm; c=21mm whose center distance = 160mm Fsdpeu N D Sbefx Aa Ejfw B-axis as positioning axis, which is clamped. *

Condition: used, Technical details: Ffsdpfx Aou N D S Uja Eew weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Machine table with 5 indexing tables for multi-side machining Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Actuation / drive is hydraulic *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm table rotating: 360 motorisch ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel Ffodpfsu N Ebdox Aa Eew T-Nuten nach DIN 650: a=28mm; h=49mm; b=52mm; c=21mm *

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 92ML/109/11821, rotary table diameter: 1,220 mm, grinding height: 572 mm, total width: 4,394 mm, total length: 3,353 mm, overall weight: 13,700 kg, grinding wheel diameter: 711 mm, spindle speed (max.): 550 rpm, power: 35 kW (47.59 HP), table diameter: 1,219 mm, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented. Fedjxgq D Dopfx Aa Ejfw Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg1220

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, rotary table diameter: 1,500 mm, grinding height: 457 mm, total height: 3,124 mm, total width: 3,150 mm, total length: 4,165 mm, overall weight: 15,000 kg, grinding wheel diameter: 863 mm, grinding spindle speed: 450 rpm, power: 45 kW (61.18 HP), table diameter: 1,500 mm, LUMSDEN Model 93ML Vertical Rotary Surface Grinder. Refurbished with new bearings in table and spindle, reconditioned main motor, new rectifyer, lubrication system, new control panel. Serial Number: to be advised New 1980's originally Country of Origin: UK Segmental wheel dia 34" Segments per set 16" Table dia and grinding capacity 60" Magnetic table dia (Humphreys) 60" Max height wheel to Magnetic table 18" Minimum height of wheel to table 4.1/2" Spindle speed 450 rpm. Table speeds 16 and 5.1/2 rpm. Automatic feeds 10 rates .004-.040 ins/min. Power elevation 25 ins/min. Spindle motor 60 Hp / 960 rpm 45 kW Table motor 6/2.1/2 HP /1440/480rpm. Feed motor 1/4 Hp / 1440 rpm. Elevation motor 1 Hp / 720 rpm. Coolant pump motor 1 Hp / 1440 rpm. Overall height of machine 10'3". Floor space 13'8" x 10'4". Approx net weight 15 tons. Fedpfx Aswugh Dea Ejfw

Condition: excellent (used), We offer you: Lehmann rotoFIX NC Rotary Table (4th Axis) EA-510.L-M1 RFX - Rotary table type EA-510.L, clamping torque 800 Nm - Tailstock GLA.TOP2-150 (clamping torque 2000 Nm) - Mounting kit RFX.510-ASa-TOP with preparation for rotary union (4-channel) - Aluminum clamping bridge RFX.510-SB600a (L=600 mm, W=215 mm) - Steel base plate RFX.510-GP600s-TOP - Electrical & pneumatic preparation - Software preparation for rotary machining - Max. rotational speed: 80 rpm - Center height: 180 mm (with base plate) - Mounting on the right side of the machine table recommended - For HEIDENHAIN controller Condition of the item: The rotary table comes from a machine with only 900 spindle hours—therefore very little use and in top condition. Subject to alterations and errors in technical data and specifications, as well as prior sale! Fjdsx U S E Ujpfx Aa Eefw

Condition: used, Year of construction: 1982, Technical details: table length: 2200 mm table width: 2500 mm table load: 16 t total power requirement: 6,5 kW feed speeds: 1,25 - 160 mm/min rapid traverse speed: 2000 mm/min longitudinal adjustment: 1500 mm weight of the machine ca.: 12 t Fsdpsvb A Uuofx Aa Eofw dimensions of the machine ca.: 4,1 x 2,65 x 0,95 m

Condition: excellent (used), For sale rotary table for boring machine Table 2000mmx2000mm Ffodpfx Aaeui Nt Nj Eow Table weight 20000kg Max table load 40000kg Travel 2000mm Control Table condition perfect

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: F/18/0003334/A/001, Milling robot cell, year of manufacture 2018, essentially consists of: Robot system including console for mounting the robot (upright); Clamping and exchange system, with one fixture inside the enclosed robot cell, the other outside the danger zone, for loading and unloading; Milling spindle including control unit; Safety enclosure and protective equipment; Control cabinet and controller; Vacuum clamping system. The cell can be inspected in operation until the end of January 2026, after which it will be dismantled and will no longer be in operation! Fedpfex Swiasx Aa Eefw

Year of construction: 1980, condition: good (used), Equipment: 4 horiz. Pinol drilling units, 3 vert. Pinol drilling units Fedpfx Asnvdmwja Esfw rotary table diameter: 400 mm rotary indexing table: 60° pitch weight: 2,6 to 1 switch cabinet 1 coolant tank

Condition: used, Year of construction: 1990, table load max. 40 t t with manual operation panel ja weight of the machine ca. 22 t 1918 Year ca. 1990 Dimensions (L/W/H) 3500 x 2300 x 2400 mm Ffjdpfohy T Nvsx Aa Eow +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 305 mm Fodpfx Ajb A Itpja Ejfw -Height: 120 mm -Dimensions: 420/370/H120 mm -Weight: 50 kg

Condition: ready for operation (used), Horizontal rotary table, manually operated Fedpfewx H Irjx Aa Eofw Bore diameter: 145 mm Including 3 inwardly stepped jaws Space required: 500 x 500 x 300 mm

Condition: good (used), Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table, rotary coupling Ffedpfjhvtcbsx Aa Eew -Manufacturer: Fibro, Fibroplan rotary table with drive -Type: NC1.03.0340.1.1.04.04 -Table diameter: 340 mm -Clamping: hydraulic -Drive: Indramat servomotor type 112B-0-LD-4-C/180-A-0/Wi533LX/S011 -Number: 2x round table available (one of which has a base plate) -Price: per piece -Dimensions: 660/640/H550 mm (with base plate) -Weight: 420 kg (with base plate) /pc.

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis Ffjdpfx Aaou N D Rqe Ejw - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: new, Year of construction: 2025, Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels Questions about technical specifications, etc. contact us in writing or by telephone. Fedpjdtq Anofx Aa Esfw Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: refurbished (used), TECHNICAL SPECIFICATIONS Rotary table diameter: 600 mm Magnetic plate diameter: 600 mm Segment holder (or diamond grinding wheel) diameter: 430 mm Maximum grinding height: 400 mm Table rotation speed, continuously adjustable: 1-20 rpm Vertical automatic increments: 0.001 mm Spindle motor power: 37 kW Grinding spindle speed, continuously adjustable: 500-1000 rpm Maximum load on table: 900 kg Net machine weight: approx. 7500 kg Power supply: 400 V +/- 5% 3 Phases, 50 Hz Control circuit voltage = 24 V DC TECHNICAL DESCRIPTION • Frame and uprights made of electro-welded, thermally stabilized steel, with high rigidity and reinforcing ribs. Vertical movement of the spindle head • Precision linear slides • Vertical movements of the grinding wheel head via high-precision ball screws + YASKAWA brushless shaft motor • Vertical movements of the grinding wheel head via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel head, 0.001 mm resolution Transverse movement of the rotary table • Precision linear slides • Transverse movement of the rotary table via high-precision ball screws + YASKAWA brushless shaft motor. • Transverse table movements via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel headstock, 0.001 mm resolution. Spindle Motor • Coaxial spindle with drive motor • Balanced 37 kW spindle motor, without drive belt or coupling. • Frequency converter for continuously variable spindle speed and rapid braking of the spindle motor at the end of the cycle. Ffjdex N I A Sopfx Aa Ejw Rotary Table • Cast iron rotary table with hydrostatic slides. • Drive via Siemens brushless motor • Continuously adjustable table speed from 1 to 20 rpm STANDARD EQUIPMENT • Electropermanent magnetic chuck, 600 mm diameter with parallel poles, complete with electronic control and attraction force adjustment • Electronic handwheel for manual movement of the vertical and transverse axes. • LODI CNC Type T 2000 • Encoder-based measuring system for the vertical and transverse axes. Resolution = 0.001 mm • Automatic cycle with different feed rates for the various cycle phases: roughing, finishing, and sparking. • Cast iron rotary table with hydrostatic slides • Rotary table speed continuously adjustable by brushless motor • Frequency converter for continuous spindle speed adjustment and rapid spindle motor braking. • Coolant system with external collection tray. • External lubrication unit for automatic lubrication of all moving parts. • Complete segment holder (flange) with a set of segments + grinding wheel holder for diamond grinding wheel • Complete work area enclosure with sliding door • Work lights • Set of service wrenches • Documentation in French (1x printed, 1x on DVD) • CE Certificate Lubrication • External lubrication system for lubricating all moving parts. Watering System • Watering system including protective plates and hoses, including a settling tank outside the machine (without filter) Enclosure • Full enclosure with manually operated sliding door CNC Control LODI T2000 type CNC for managing and controlling the machine's axis movements. Automatic work cycle for grinding parts.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, TECHNICAL SPECIFICATIONS, MODEL RTR 600 CN Table diameter mm: 600 Electromagnetic chuck diameter mm: 600 Cross travel mm: 350 Max. grinding height with new grinding wheel mm: 400 Table speed, continuously adjustable rpm: 1-200 Gripping wheel dimensions mm: 400 x 50 x 127 Gripping wheel rotation speed, fixed rpm: 1,450 Fodpfxjx N I Ale Aa Eefw Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power kW: 15 Max. load on table kg: 1,000 Net weight approx. kg: 5,200 Vertical movement is achieved on linear slides and is driven by a precision ball screw and a YASKAWA AC motor. Vertical axis resolution: 0.001 mm. Measuring system = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Transverse movement is performed on linear slides and is controlled by a precision ball screw and a YASKAWA AC motor. Transverse movement is performed by the grinding wheel head mounted on the cross slide. Transverse axis resolution = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Rotary table with hydrostatic circular slides. Infinitely variable rotation speed, with YASKAWA AC drive motor. Balanced hardened steel spindle with 15 kW motor. Fixed speed. Option: YASKAWA frequency converter for continuously variable spindle speed (1,100–1,900 rpm) Lubrication unit with automatic lubrication cycle, external to the machine, without initial filling. Standard accessories: - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, flash grinding - Digital measurement of the vertical and transverse axes. Resolution = 0.001 mm - Electronic handwheel for manual axis movement - Continuously variable table speed via YASKAWA AC motor. Rotary table with hydrostatic slides - Grinding wheel headstock with 15 kW motor. Fixed spindle speed: 1,450 rpm. - Central lubrication for all moving parts - Hydraulic unit located outside the machine - Complete watering system with piping, electric pump, guards, electrical equipment, and a 250-liter settling tank (without filter) - Complete enclosure of the work area with sliding door (open ceiling) - 1 complete flange with grinding wheel - Work light - 1 set of service wrenches - CE Declaration of Conformity + CE plate - Operating voltage 400 V +/- 5%, 50 Hz - Electro-permanent magnetic plate with electronic device for adjusting the attraction force. WAGNER brand, type EP 360 - Ø 600mm - YASKAWA frequency converter for continuous adjustment of the grinding wheel speed (1,100-1,900 rpm) and for braking at the end of the cycle - LOSMA paper filter, type DTE 100 (capacity 300 liters) - LOSMA wet fume extractor, type AS1 (capacity 1,300 m³/h) - "MARPOSS" dynamic grinding wheel balancing device for dynamic and automatic balancing of the rotating grinding wheel - Linear diamond holder mounted on the grinding wheel headstock. Automatic dressing cycle with automatic grinding wheel wear compensation. Diamond increment by AC motor. Resolution 0.001 mm - 1 Diamond - Complete auxiliary pump for washing parts and the magnetic platen

Condition: excellent (used), Year of construction: 2010, Excellent condition can be demonstrated if required we also have a video of it running Ffsdpfxoq Rcils Aa Ejw we have also got a tailstock if required