Used Manual Rotary Table for sale (47,496)

Condition: excellent (used), Dimensions: Dedpfsu Sy Ubsx Ab Tjla Width 770mm Height 770mm Weight 200kg Electronic signal from the machine Hydraulic power supply from the machine Maximum rotation 180 degrees Rotation determined by limit switches built into the rotary table

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container. Dljdpfelccvmjx Ab Tja

Condition: used, Technical details: table diameter: 450 mm table height: 160 mm rotation movement: 360 Grad passage: 40 mm weight of the machine approx.: 150 kg Dlsdpfsu Nkncex Ab Toa space requirements of the machine approx.: 650x600x170 mm basis stand area: 620x420mm T-slots : according to DIN 650 und 508 T-slots 8x radial, 4x163mm length and 4 x 135mm length - a=12mm - h=19mm - b=21mm - c=9mm *

Condition: new, table diameter 340 mm table load 160 horizontal kg. Dledsxabm Nepfx Ab Tsa table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: used, Year of construction: 2006, functionality: unexamined, We are offering here a rotary table from the brand Parkson. The model is PAR-251 R. The rotary table has a diameter of just under 250mm. Dsdsxtu Efepfx Ab Tsla Feel free to contact us for a non-binding offer.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Dljdpfextmp Njx Ab Tsa

Condition: ready for operation (used), BELANGRIJKSTE KENMERKEN: Tafelafmetingen: 3000 x 3500 mm Omgeschreven cirkel: 4300 mm Toelaatbare belasting (gelijkmatig verdeeld): 50 ton op 3000 x 3500 mm Totale tafelhoogte zonder cilinder: 1.250 m Aantal T-gleuven, breedte 36 H7: 13 T-sleufafstand: 250 mm Lengteverplaatsing: 2700 mm Longitudinale voedingen / bed: • positionering: 2 mm/min • werkend: 1 tot 3000 mm/min • snel: 3000 mm/min Circulaire feeds: • werkend: 0,0006 tot 0,6 tpm • snel (50-tons belasting): 0,6 tpm Nominaal koppel van longitudinale motor/bed: 9,4 mkg Dsdpfxoxpggyj Ab Tsla Nominaal koppel van cirkelmotor/tafel: 22 mkg Totaal geïnstalleerd vermogen: 50 kVA Tafelgewicht (zonder elektrische apparatuur): 31.000 kg

Condition: excellent (used), 1 x Planet Fabrications Limited stainless steel lazy susan / rotary packing table.  Technical specification  ⚙️ ✅ Manufacturer - Planet Fabrications Limited ✅ Diameter - 1240mm.  ✅ Height - 760mm.  ✅ Single speed.  ✅ Electric supply - 3 phase. General information ℹ️ This stainless steel rotary packing table from Planet Fabrications Limited is a simple yet highly effective solution for streamlining your packing and assembly processes. Dlsdpfow H Dc Nsx Ab Toa Also known as a "lazy Susan," this robust machine is a workhorse in food production, warehousing, and other manufacturing environments.

Condition: used, Year of construction: 2006, Technical details: Dlodpeu Nkx Iefx Ab Tsa table load: 2,2 t table diameter: 2500 mm Total power requirement: 9,6 kW max. table load: 22.000 daN / 2200kg table rotating: links/rechts Grad table - inclinable: 0 - 120 Grad table height: 1700 mm machine weight approx.: 12000 kg connected load: ca. 5,0 kVA dimensions LxWxH: ca. 4,5 x 2,5 x 2,3 m Welding positioning turn-tilt table developed and manufactured by Müller Opladen ARC KON EWeding GmbH. Machine frame solid, welded steel construction with ball-bearing tilting device Table with centering grooves and T-slots for M24 according to DIN 650. Infinitely variable rotary drive from 0.05 - 1.0 rpm. Height to center of swivel axis 1700 mm hydr. tilt adjustment, infinitely variable from 0 - 120° Drive is designed for a torque of approx. 40,000 Nm at the turntable Accessories: 1x 2-row foot switch 1x remote control 1x working platform *

Condition: used, functionality: fully functional, rotary table diameter: 2,000 mm, Table size: Ø2000 mm. Size (L x W x H): 2000 x 1500 x 2200 mm. Weight: 1200 kg. With variable speed. 25° manual tilt Dljdpfx Aoxtaazeb Toa Vertical welding table for rings, flanges and light work pieces.

Condition: excellent (used), REF: MM6190 1 x Lazy susan / rotary packing table with poly-top and on height-adjustable feet. Dljdpfx Aoxf D Rbeb Tsa Technical specification ⚙️ ✅ Diameter - 1500mm.  ✅ Fixed speed.  ✅ Electrical requirements - 1 phase.

Condition: used, Year of construction: 1988, Technical details: table diameter: 500 mm Dsdpfeu N D I Aox Ab Tola table height: 150 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 110 kg dimensions: 800 x 800 x 180 mm Rotary table operation by handwheel Operation Coupling connection Ø 20 x 32mm Foot mounting: 2x clamping groove Ø 19 x29mm Equipment: 8-sided top plate, size 665mmx23mm, 3x through-holes Ø 30mm in the centre Accessories: 4x eyebolts *

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm table height: 70 mm rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm Djdju Nkm Eepfx Ab Tsla *

Condition: used, Technical details: table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) Dodpfx Asu N Dz Aob Tola -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm *

Condition: used, Technical details: table diameter: 450 mm rotatability of the table - manual/mechanic: 360 ° clamping table - swivable: 90° mechanisch Grad weight of the machine approx.: 100 kg dimensions: L: 800 x B: 700 x H: 400 mm The surface of the round table is scraped. Very good condition! micrometer precise locking Positioning in the 0.01 mm range T-slots according to DIN 650 radial Foot clamping 16mm (6 holes) Dlodpfou N D Aysx Ab Toa *

Condition: used, Technical details: table diameter: 950 mm table height: 300 mm Djdpfjwf Iuyjx Ab Tola rotation movement: 360 Grad table - tiltable: 50 Grad transport measurements machine: 1,0 x 1,0 x 0,4 m weight of the machine approx.: K.A. kg

Condition: used, Technical details: table diameter: 300 mm table height: 250 mm rotation movement: 360 Grad Dledpfxju Nknpe Ab Tea passage: 40 mm swivellable: einseitig 90° ° weight of the machine approx.: 126 kg dimensions LxWxH: 0,65 x 0,52 x 0,25 m basis stand area:380x330mm T-slots: according to DIN 650 und 508 T-slots 4x163mm length and 4x 135mm length - a=12mm - h=19mm - b=21mm - c=9mm *

Condition: used, Technical details: table length: 4000 mm table width: 4000 mm table load: 100 t table adjustment - longitudinal: U-Achse: 2000 mm table rotating: B-Achse: 360 ° rapid traverse longitudinal: U-Achse: 6000 mm/min mm/min. rapid traverse:: B-Achse: 0,05 - 2 U/min U/min Rotary table The U and B axes are equipped with hydrostatic guides. Hydrostatic or bearing support : Hydrostatic support. Dljdpfsu N D Tlex Ab Tja Ø of the fifth wheel : 2.190 mm Hydraulic locks - 3 hydrostatic guideways for longitudinal movement - 1 hydrostatic circular guideway for the rotation axis Positioning system: - Heidenhain angle encoder for the B axis - Heidenhain optical scale for the U axis The servo motors, the control cabinet and a panel are not included in the scope of delivery. *

Condition: used, Year of construction: 2008, Technical details: table diameter: 1000 mm table height: 75 mm max. table load: 250 kg weight of the machine approx.: 1128 kg dimensions: Aggregat: L: 1400 x B: 1000 x H: 160 mm 1-axis NC rotary table - horizontal Positioning and rotary machining mode; intermittent operation with 8 star-shaped T-slots according to DIN 650: a=18H7; h=31mm; b=31mm; c=13mm x length 380mm Finished surface Overall height 250mm Dlsdpfx Asu N D A Tjb Toa Turning: Rotation 360°, by means of incremental encoder, speed 2160°/min. Angular acceleration 120°/sec.²; positioning time 0.867 sec., speed max. 6 rpm, machining 1 rpm. Load on indexing plate axial max. 100kN, radial max. 115kN; Torques tangential 14,000 Nm as well as worm gear 7,000 Nm and circular machining 2,700 Nm Measuring system Heidenhain - RON 886 C type connections (2x G 1/4" and 2x G 1/8") *

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed Dlsdpfxou N D Rqo Ab Toa *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250 mm table rotating: 360 ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/U total power requirement: 6 kW Dodpfsu N D Szsx Ab Tsla weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Rotary table conventional *

Condition: used, Year of construction: 1975, Technical details: table diameter: 320 mm table height: 50 mm rotation movement: 360 Grad passage inside table: Ø 40 mm weight of the machine approx.: 73 kg space requirements of the machine approx.: L:0,63xB:0,53xH:0,14 m Djdpfx Asu Nkpmsb Tela round table movement via manual wheel machine operation possible T-slot: 3x long and 1 x transverse - a=18mm - b=30mm - h=29mm - c=12mm *

Condition: used, Technical details: table length: 2000 mm table width: 1700 mm table load: 15 t x-travel: längs=3000 mm table rotating: 360 motorisch ° height over floor: 1020 mm total power requirement: ca. 1,0 kw Djdpfxsu N D Sbs Ab Tsla weight of the machine ca.: 14,2 t dimensions: 5,7x2,1x1,0 m The boring mill table was built in 1985 and overhauled in 2023 (retrofit) The table is mounted on a flat bed guide (5000x1380mm). The axis of rotation (B) is mounted hydrostatically, 9x T-slots according to DIN 650 and 508: a=28mm; h=54mm; b=51mm; c=21mm whose center distance = 160mm B-axis as positioning axis, which is clamped. *

Condition: used, Technical details: weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Machine table with 5 indexing tables for multi-side machining Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Djdpfxju N D S Ue Ab Tjla Actuation / drive is hydraulic *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm table rotating: 360 motorisch ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel Dodeu N Ebdopfx Ab Tsla T-Nuten nach DIN 650: a=28mm; h=49mm; b=52mm; c=21mm *