Used Manual Arbor Press for sale (26,037)

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, power: 1.15 kW (1.56 HP), Equipment: CE marking, documentation/manual, SANGIACOMO T15 TECHNICAL SPECIFICATIONS: Press Model: T15 CE Serial Number: 11637 Year of Manufacture: 2003 Nominal Force: 150 kN Nominal Stroke: 1.8 mm Adjustable Stroke: 7÷60 mm Stop Position: TDC (Top Dead Centre) Ram Adjustment: 40 mm Stopping Time: 79 ms Strokes per Minute: 165 Safety Distance (1.6 m/s): 127 mm Maximum Die Area: 260 x 360 mm Maximum Shut Height: 226.5 mm Minimum Shut Height: 200 mm Upper Die Mass: 25 kg Flywheel RPM at 1st: 165 Max Insertions at 1st: 70 Installed Power: 1.15 kW Voltage: 400 V Auxiliary Voltage: 24 V Working Air Pressure: 5.5÷6 bar Isdsy Nx Ncepfx Ah Estl Weight: 630 kg • Work table reconditioned on CNC machine. Complete with user manual, CE conformity certificate, and 6 months warranty (excluding electronic parts). INSTALLED NEW COMPONENTS: • Magnetic safety sensors on guards; • Flywheel bearings; • Electrical panel with touch screen;

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Vacuum Press – Ready for Immediate Use | Excellent Condition | Versatile Applications For sale: High-quality vacuum press in excellent condition – ideal for joineries and woodworking companies seeking to work more efficiently and flexibly. This press enables you to: - Perform precise veneering - Carry out form bonding - Shape mineral-based materials and plastics - Achieve efficient production even for single pieces and custom solutions What this means for you: Expand your service portfolio and take on jobs that were previously not feasible or profitable. Technical Specifications: Vacuum Press Pioneer Vertical L Usable area: 3050 x 1350 mm Frame internal dimensions: 3130 x 1430 mm Max. workpiece height: 850 mm Overall dimensions: 3960 x 1640 x 1450 mm Weight: 880 kg Heater Pioneer Heat L Usable area: 2700 x 1100 mm Overall dimensions: 3110 x 1700 x 760 mm Weight: 685 kg Special features: - Easy operation - Low maintenance requirement - Versatile applications - Lifetime warranty (excluding wear parts) - Includes digital user manual and AI support! Ijdpjzqtlfofx Ah Eotl Inspection and test run possible at any time.

Condition: like new (used), Year of construction: 2020, operating hours: 395 h, functionality: fully functional, machine/vehicle number: 980-416, total width: 2,098 mm, total height: 1,405 mm, total length: 2,316 mm, briquette diameter: 80 mm, overall weight: 1,800 kg, type of input current: three-phase, input current: 28 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 250 l, Equipment: cooling unit, emergency stop, WEIMA TH 814 Briquette Press! Top condition! Like new! Available immediately! Private sale (no VAT can be declared)! Operating hours: only approx. 400 hours The WEIMA TH 814 is a robust hydraulic briquetting press for industrial applications. It processes wood and biomass waste into highly compressed cylindrical briquettes with a diameter of 80 mm. The machine is designed for reliable continuous operation and offers high energy efficiency as well as a compact design for easy integration into existing plants. Model: WEIMA TH 814 Briquette diameter: 80 mm Applications: Wood, biomass, paper, plastic waste Year of manufacture: 2020 Throughput rate: up to approx. 180 kg/h Hydraulic motor: 11 kW Hydraulic system: automatic operation, suitable for continuous duty Weight: approx. 1,800 kg Dimensions (L × W × H): approx. 2,098 × 2,316 × 1,405 mm Hydraulic oil capacity: approx. 250 liters Iedoy Af T Ispfx Ah Eotl Feed hopper: approx. 1,400 × 1,400 mm Briquette length is adjustable and can be regulated via the feed auger's speed. Depending on the feed material rate into the pressing chamber, the briquette length will vary. The control is managed by a time relay in the control cabinet, which determines the running time of the feed auger's motor. The machine has seen little use and is in very well-maintained condition. Sale due to underutilization. Trial run on-site possible. Loading on-site possible. Original operating manual (Hungarian) available. A German version can be provided by the supplier if needed. The integrated hydraulic system is equipped with automatic oil preheating and oil-cooling function. This ensures an optimal temperature range of the hydraulic oil, even at low ambient temperatures or during continuous operation. This allows reliable 24/7 continuous operation of the machine. The price is set fairly considering the condition and very low operating hours. Inspections can be arranged at short notice by appointment. If interested, I look forward to your message.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 280” color production system Itjdpfjzb Aivsx Ah Esl Items for sale: 1 x Xerox Versant 280 with the following features: Includes Booklet Finisher A-GW03/A-GW06/A-FN13/ Includes Paper Deck A-CF06 with high capacity Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 1,977,908 pages Color: Approx. 698,361 pages Black: Approx. 1,279,547 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, please feel free to contact us directly.

Condition: used, Year of construction: 2003, Manufacturer: Haulick + Roos GmbH Type: RVD 3000-2500 Machine Type: High-performance stamping press Year of manufacture: 2003 Condition: used Rated pressing force: 3,000 kN Pressing force: 300 t Stroke frequency: 20–180 strokes/min Drive power: 80 kW Ram stroke: 20–160 mm Ram adjustment: 150 mm Tool installation height: max. 450 mm Maximum tool length: 2,500 mm Maximum tool width: 1,000 mm Table area: 2,450 × 1,000 mm Ram area: 2,500 × 950 mm Clamp plate opening: 2,250 × 350 mm Machine weight: approx. 46,000 kg Strip feed direction: right to left Power supply: 400 V Frequency: 50 Hz Maximum connected load: 80 kVA Maximum fuse rating: 250 A Draw cushion: not available Components of the system: Haulick + Roos high-performance stamping press RVD 3000-2500 DIMECO coil unwinder, type 23S1/D/VV Year of manufacture: 2003 Weight: 1,450 kg Maximum load capacity: 4,000 kg DIMECO roller feed, type 1681/17/BVV Year of manufacture: 2003 Weight: 540 kg ARKU straightening machine Technical data for roller feed: Strip width: 5–420 mm Strip thickness: 0.1–5 mm Maximum strip cross-section: 1,000 mm² Itedpfx Aozrz Dxjh Eol Strip speed: up to 125 m/min Feed length: 0.1–999.9 mm Feed accuracy: ±0.1 mm Roller diameter: 100 mm Strip height adjustment: 100 mm, manual mechanical Note: The ram guide should be replaced. The system is currently still in operation and functional. A quote from the manufacturer for complete disassembly and installation of new guides is available for approximately €200,000. We will gladly provide videos of the system in operation upon request.

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Isdpfsh Uhqyjx Ah Ejtl Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Year of construction: 2000, condition: excellent (used), very clean / low hours used Trumpf Trumatic 500R CNC Punch Press for sale Iedpfsng Al Aex Ah Eotl 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2000 Fully serviced With manuals Good condition and can be seen working in production Complete with:

Condition: ready for operation (used), Year of construction: 2008, pressure 56.0 t Itedpfx Aozy Sdxjh Eel chamfer lenght 1400 mm distance between columns 1300 mm throat 220 mm stroke 200 mm dayligth 485 mm work speed 8.0 - 10.0 m/min return speed 35.0 mm/sec Control CNC Boschert back stop - adjustable 0 - 370 mm work height max. 915 mm Cylinders : 2 Stück voltage 3x 400 V connected load 8.0 kVA weight 3700 kg very good / well-maintained condition (!!) with lots of bending tools - in checked conditions - machine video - ?v=NrpZs6Ar0Vo Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, including tool cabinet - 1x working cylinder = double-acting cylinder - upper beam made from a solid steel plate - pressure gauge for pressing pressure (infinitely adjustable) - 2x front support tables - 1x freely movable foot switch - robust machine base - rear protective device (cover + circuit breaker) - original operating instructions (machine + control)

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Iodoyath Tspfx Ah Ejtl Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Year of construction: 2006, condition: reconditioned (used), TECHNICAL FEATURES: Press Model: T35 TL/V-SM Serial number: 11970306 Year of construction: 2006 Nominal force: kN 350 Test date: 23/05/06 Adjustable stroke: mm 11÷78 Strokes per minute: n°122 Slide adjustment: mm 50 Light at bottom dead centre: mm 275 Max. grafts per minute: n°35 Max revs flywheel: n°122 Weight: 2,700 kg Min. air pressure: 6.5 bar Clutch pressure: 5.5/6.0 bar Braking angle: 55° Stopping time: 247 ms Max. mold dimensions: B=280 x L=240 x H=180 Max. moving part weight: Kg 40 Nominal pressure: KN 350 at 2mm at 120 strokes/min Machine Stop: TDC (Top Dead Center) Complete with user manual and CE conformity Six (6) months warranty excluding electronic parts. Itjdjmhhdbjpfx Ah Eol NEW COMPONENTS INSTALLED: • Front safety guard with safety keys.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Itjdezt H Uxopfx Ah Ejl Made in Germany.

Condition: used, Bystronic Xpert 250x4100 - CNC Press Brake Bending length: 4100 mm Capacity: 250 t - Bystronic 2D and 3D graphics control, ergonomic operating terminal with 15-inch color monitor - 8 axes (Y1, Y2, X, R, Z1, Z2, A1, A2) - AKAS laser safety device, manually adjustable in height - Hydraulic crowning - Air bending - Radius bending - Without tooling - Includes operating manual - Year of manufacture: 2007 Technical data - Press force: 2500 kN - Bending length: 4100 mm - Standard stroke: 265 mm - Installed height (clearance between lower and upper beam): 550 mm - Distance between side supports: 3750 mm - Overhang: 400 mm - Back gauge area: 1050 mm - X-axis travel: 590 mm - X-axis speed: 500 mm/s - R-axis travel: 250 mm - R-axis speed: 150 mm/s Itedpfx Ahjzizybo Eol - Z-axis speed: 1000 mm/s - Z-axis speed (6 axes): 500 mm/s - Y-rapid traverse: 190 mm/s - Y-working speed: 1 - 10 mm/s - Y-working speed for robot operation: 1 - 12 mm/s - Y-return speed: 150 mm/s - Crowning: hydraulic - Adjustable support arms: 750 mm - Maximum surface pressure without wear strip: 100 N/mm2 - Maximum surface pressure with wear strip: 120 N/mm2 - Oil capacity (tank volume): 610 l - Noise emissions: 74 dB(A) - Main motor power: 22 kW - Voltage: 3x 400 V / 50/60 Hz - Transport dimensions WxHxD: 5200 x 3200 x 2100 mm - Weight: 19200 kg

Condition: new, functionality: fully functional, Comparable with Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 320 t (also available in many other configurations!) Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Y-axis stroke 400 mm Open height 650 mm Throat depth 450 mm Clear gap between frames 2555 mm Machine length 3785 mm Machine width 2290 mm Width without support arms 1740 mm Overall height 3100 mm Table height 920 mm Motor power 22 kW Oil tank capacity 300 l Machine weight 14,450 kg (Specifications may vary depending on equipment) Standard equipment: 3 CNC axes (Y1, Y2, X) Press beam double-guided, stable and precise Robust double-guided backgauge Backgauge fingers double-guided on linear rails Movable front arms with height adjustment Side and rear safety guards 60mm lower die adapter rail Manual upper tool clamping system (Promecam system) Isdpfx Aheuf Nr As Eotl Foot switch with emergency stop 380 V, 50-60 Hz, 3 phase LED lighting Additional equipment: Delem DA 66t CNC control R-axis (backgauge) CNC controlled CNC-controlled crowning Fiessler Akas 2M laser safety device 2 additional backgauge fingers (total 4) 1 set of top and bottom tooling - Further processing lengths and capacities available upon request with appropriate accessories! -

Condition: new, Hydraulic workshop press HIDROLIKSAN HD 60 Technical specifications: Pressure: 60 t Stroke: 400 mm Distance between columns: 820 mm Itjdpfx Ahsk Taggs Ejl Working speed: 5.0 mm/sec Retraction speed: 9.4 mm/sec Motor power: 3 kW Machine weight: approx. 700 kg Space requirement: approx. L x W x H 1460 x 850 x 2400 mm Equipment: Hydraulic workshop press with horizontally movable cylinder Motor-driven hydraulic system and additional manual lever Height-adjustable table V-block tool insert Pressure gauge

Condition: excellent (used), MDS Type: MDS A220-PD MDS A220-PD Manual Assembly Station The A220-PD assembly system is a stationary manual assembly station for processing press-fit components. Intended use: The machine is used for press-fitting connecting elements. The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine. The operator then starts the press-fitting process using a foot switch. The press-fitting process runs automatically. Connecting elements: Press-fit nut, rivet nut, self-piercing nut, press-fit pin, punching pin/rivet pin Thread size: M5, M6, M8, M10, M12 Technical data: Control voltage: 230V/10A Connection plug: HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, water-free, and oil-free air Connection: 1/2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (B): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type: C-frame A220-PD Continuous sound pressure level (LpA): 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The press-fitting of the connecting elements takes place in automatic mode. Movements are only initiated when the operator presses the foot pedal and thus triggers the press-fitting process. Itodpfx Aszgr I Rsh Esl Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: like new (used), System: Chamber filter press, laboratory press Application area: Chamber filter press, pilot plant Design: side-bar guided Type: REWA Filter plate size: 150x150 mm Number of plates: 4 + 1/2 head and end plate Iodpewqzibefx Ah Eetl Filter plates: PP Cake thickness: 15 mm Filter cloths: optionally available tailored to the medium Discharge: open Filter area: approx. 0.2 m² Press content: approx. dm³ Plate transport: manual Pump technology: included - optional Purchase or rental: Inspection of the systems by appointment at our facility. Condition: Demonstration unit, as new Weight: approx. 70 kg Length: approx. 70 cm Width: approx. 40 cm Height: with frame + pump approx. 85 cm Miscellaneous: Would you like to rent, lease, or buy this system? Contact us, we are happy to be at your disposal.

Condition: excellent (used), Baling press Hsm HL 4809 Itedpsv Ak Npefx Ah Eol - Large filling opening, ideal for large boxes - Container tipper for convenient filling Power in kN: 480 - Motor in kW: 10.7 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 - Dimensions of the device length x width x height in mm: 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire Year 2015-2017 Complete baler, side housings unscrewed for transport Balers after inspection by an authorized service center

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent Itedpfstx E Rqjx Ah Esl - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Channel baling press Paal Konti 325 D/SO, year of manufacture 1999 Technical data: Manufacturer: Paal Type: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connection: 104 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput at: 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions approx. 12352 x 2340 x 2800 mm (L x W x H) Isdpfx Asz A T I Ieh Eetl Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Note: The press is in fully functional condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), Itodsv Rwu Ujpfx Ah Ejl two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: as good as new (ex-display), overall weight: 900 kg, working width: 1,000 mm, compressed air connection: 12 bar, product height (max.): 90 mm, space requirement length: 3,500 mm, space requirement width: 3,500 mm, working length: 2,400 mm, We sell 6 deck press for width gluing of wood, gluing dimensions 2400 x1000 x 90 mm, manual turning Itedst Agh Dspfx Ah Ejl New, in stock, immediate delivery

Year of construction: 2001, condition: excellent (used), Quality used Trumpf Trumatic 500R CNC Punch Press for sale Iodsh Nf Upepfx Ah Ejtl A late Trumpf 500 just before the 5000r 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2001 Fully serviced With manuals Good condition and be seen working in production Complete with: · Capable of taking multi tool a good selection of tooling available along with multi tools

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame Ijdpfx Aheu U Ey Ie Eotl - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 20 t, Hydraulic 20 T single-column production press for the manufacture of lightweight concrete parts. Here are the technical data of the offered machine: If the press does not exactly meet your requirements, please click here to request an individual offer exactly according to your wishes: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly favourable prices! Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Maximum open height 300 mm d) Pressing speed 4 - 10 mm/sec. ( adjustable via rotary control ) e) Die size 600x800 mm f) Ram size 950x600 mm g) Manual lubrication (via grease nipple) h) Pressure setting from 5 T to 20 ( adjustable via rotary control ) i) Travel 300 mm j) Installation, commissioning, instruction at extra charge Technical Data Press type C Press, hydraulic Thermal neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel on steel Max. 3 sec. Dimensions Max. Opening width 350/50 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2,500 mm Parallel deviation at 20°C +/- 0.4 mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.6 mm/m Weight Total weight of the press without operating materials approx. 2.2 to Speeds Fast closing with 10 mm sec. Press speed 10-5 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of press cylinders 1 pc. Itjdpsia Nc Tsfx Ah Ejl Plus 1 ejector, 110 mm stroke, max. operating pressure 255 bar Pressing pressure build-up time 03. apr sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/ASC approx. 6 L/min Oil volume approx. HLP 46 D 100 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 4 kW (C-press, hydraulic press, hydraulic press, concrete press) Are you looking for a customised machine? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), the EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply in all points with the national Brazilian safety directive NR 12, which is based on these. Our great strength is the construction of special machines and press automation. We sell customised hydraulic presses, press brakes and impact shears at surprisingly favourable prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Condition: used, Year of construction: 1970, pressure 1 t Stroke 315 mm Iodpfxsv Td Erj Ah Estl