Used Manual Arbor Press for sale (24,672)

Condition: ready for operation (used), total height: 2,800 mm, total width: 1,800 mm, total length: 4,300 mm, empty load weight: 8,000 kg, Forming press for leather, textiles, hardboard etc... + roller system width 2500 mm Capacity: 50 Ton Dsdeyru Hbopfx Aaajki Max distance between table - ram: 175 mm Dimensions of the table: 2850 x 1250 mm dimensions stamp: 800 x 800 mm

Condition: good (used), Year of construction: 2012, The pre-shredder (upper section) is not included in the offer. Only the lower part is offered. Paper baler / baling press PRESTO CC 40 V Manufacturer: PRESTO GmbH & Co. KG Machine type: CC 40 V Machine number: 28074 Year of manufacture: 2012 Empty weight: 4,200 kg Max. operating pressure: 260 bar Dkjdoyrt T Topfx Aaaoi Protection class: IP55 Rated current: 30 A Rated voltage: 400 V, 50 Hz Rated output: 15 kW Electrical connection: 35 A gG Machine type: horizontal baling press for paper and cardboard

Condition: excellent (used), Working width ca. 2.600 mm Working height ca. 1.450 mm Number of cylinders 6 St. Djdpfxsyrt Abe Aaaeki down holder 3 St. Stable hydraulic hole press, hole plate press, or gluing press for gluing or fixing workpieces such as frames, panels, windows, or doors.

Condition: excellent (used), Year of construction: 1960, pressure 25 t Dkodjyrtwfjpfx Aaaei weight of the machine ca. 25 t

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t Dodpfjyrrtxox Aaaeki

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. Dsdpfoyrrtljx Aaaski It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Dodsyrrpajpfx Aaaoki Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. Djdpsyrrlbefx Aaaski It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 2018, 3 x Electric High-Lift Pallet Trucks, Jungheinrich, ERC214z – used –: Price per unit ex-location (net): Year 2018: €2,950 Year 2022: €4,950 Manufacturer: Jungheinrich Model: ERC 214z Year of manufacture: 2018 and 2022 Load capacity: 1,400 kg or 2,000 kg Lifting height: approx. 4.30 m Free lift: up to 2,125 mm Maximum lift: up to 6,000 mm Load centre: 600 mm Travel speed: unloaded 11 km/h Lifting speed: unloaded 0 m/s Battery voltage: 24 V Battery capacity: 375 Ah Weight incl. battery: 1,320 kg Operating hours: see list, status as of January 2026 – several hours have been added to each Charger included Condition: good Availability: immediately Location: Erfurt, later warehouse in Augsburg Dkjdjyrraxopfx Aaaoi Pos: 18 / 15 / 27 Further photos of the other units available on request! BH 1/26 Year of manufacture ERD01 90569689 High-lift pallet truck ERC 214z 7,616 2018/10 90658714 High-lift pallet truck ERC 214z 1,113 2022/4 90658715 High-lift pallet truck ERC 214z 1,711 2022/4

Condition: used, Year of construction: 1998, total length: 3,350 mm, total width: 2,180 mm, total height: 2,780 mm, Weight: 9.000 kg Price: On request - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 230 - Drive system: Conventional - Power [kW]: 11.0 - Press force [ton]: 160 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Tools included: Yes - Options: Digital readout - Transport dimensions: 3350mm x 2180mm x 2780mm (l x w x h) - Transport weight [kg]: 9000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Dsdpoyrpvkjfx Aaaski

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 Dedpshmmfksfx Aaaeki - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Dodpfx Asd Rmcmsaaoki Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Djdpsk S Htxjfx Aaaski Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread Dkjdswki Apspfx Aaaoi - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003572 - Manufacturer Code: 2-007-03-3970 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service, please contact us. 2KG - 36X26X21 Dkjdpjyrn Ryjfx Aaaoi

Condition: new, functionality: fully functional, Year of construction: 2004, Pressing force: 225 t Bending length: 3050 mm Distance between uprights: 2550 mm Control type: DNC 1200PS Eco/Col Ram stroke: 700 mm Throat depth: 405 mm Distance table/ram: min. 320 / max. 1020 mm Total power requirement: 29.5 kW Machine weight approx.: 15,500 kg Accessories/Equipment: Rear gauge Backgauge traverse adjustment: - X-axis gauging range (from bending line): 5–1000 mm - X-axis adjustment speed: max. 500 mm/sec Height adjustment: - R-axis adjustment range (from table surface): 85–235 mm - R-axis adjustment speed: max. 150 mm/sec Backgauge finger adjustment: - Z1-axis adjustment range (from left table front): 520–2365 mm - Z1-axis adjustment speed: max. 1000 mm/sec - Z2-axis adjustment range (from left table front): 690–2535 mm - Z2-axis adjustment speed: max. 1000 mm/sec - X1-axis adjustment range (from center line): ± 125 mm - X1-axis adjustment speed: max. 250 mm/sec Die shifting – adjustment via rear gauge (MVX): - Adjustment range: max. 100 mm - Adjustment speed as per X-axis: 500 mm/sec Dkodpfxexb Tfte Aaaji Front support/press brake aides: - Swivel angle BV1/BV2-axis: 55° - Swivel speed BV1/BV2-axis: max. 45°/sec - Lifting force per swivel arm BV1/BV2-axis: max. 1,500 N

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, Pressure: 85 t Bending length: 2050 mm Frame gap: 1750 mm Control: DELEM Stroke: 215 mm Dedow D Abrjpfx Aaaeki Throat depth: 410 mm Total power: 13 kW Weight: 8,750 kg Machine dimensions: 3190 x 2100 x 2375 mm

Condition: used, functionality: fully functional, Year of construction: 1996, Pressure 160 t Bending length 3000 mm Dkedpox A Eucefx Aaasi Machine weight approx. 16 t

Condition: good (used), functionality: fully functional, Year of construction: 1999, Press force 320 t Bending length 4100 mm Stroke 350 mm Total power requirement 32 kW Machine weight approx. 23,500 kg Space requirement approx. 4300x2600x3400 mm Equipment: -CNC control Amada Operator -Quick-change tool holder Amada Dkjdpsxu Na Tsfx Aaaoi -Bottom tool clamping Amada -Controlled axes: y1, y2, x, r, z1, z2 -Rear safety doors -Two-hand foot control

Condition: used, Year of construction: 2002, Pressure 250 t Bending length 3550 mm Frame width 3000 mm Dkedjwn Ebispfx Aaaoi Control Cybelec DNC 1200 Machine weight approx. 18,500 kg Space requirement approx. 4300x2750x3750 mm Accessories: - 2-hand foot switch - Lasersafe Fisseler - Hydraulic tool clamping top and bottom - Die shifting - Hydraulic crowning - Support arms - Control Cybelec DNC 1200 - 1 set of upper and lower tools - Controlled axes y1, y2, x, r, z1, z2, back gauge tilt - Safety guard

Condition: used, Year of construction: 2000, Control system retrofit 2026: CybTouch 15 Windows Press force 100 t Bending length 3100 mm Stroke 215 mm Safety distance 350 mm Frame width 3250 mm Compressed air max. 8 bar Closing speed 200 mm/s Pressing speed 1-10 mm/sec Dkjdpfxewn Ebve Aaaoi Total power requirement 7.5 kW Machine weight approx. 8,000 kg Dimensions L-W-H 3450x2000x2800 mm

Condition: used, Year of construction: 2016, operating hours: 27 h, total length: 3,900 mm, total width: 1,600 mm, total height: 2,300 mm, Weight: 6.650 kg Price: On request Dkedpfx Aaoyrn Edoaei - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 27 - Drive system: CNC - Control system brand: Delem - Control system type: DA-66T - Power [kW]: 7.5 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 100 - Max. working width [mm]: 3100 - Column gap [mm]: 2600 - Throat depth [mm]: 300 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 140 - Crowning system: CNC-controlled - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 3900mm x 1600mm x 2300mm (l x w x h) - Transport weight [kg]: 6650kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 1992, Pressure: 200 t Bending length: 3050 mm Distance between uprights: 2550 mm Ram stroke: 274 mm Control: Cybelec ModEva Pac Approx. machine weight: 17,000 kg Dkjdpfxjxb Sugo Aaaoi Accessories/Equipment: - Control conversion to Cybelec ModEva Pac - 2 bending aids in front of the machine - Fiessler light curtain in front of the machine - Foot switch

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003544 - Manufacturer Code: 2-025-15-2010 - Condition: As new (display item) - Functionality: Fully functional - Compatible Machine: - If interested, we offer an overhaul service, please contact us. 3KG 46X39X27 Dksdpfx Aaoyrn Hbjaoi

Condition: new, functionality: fully functional, Year of construction: 2025, Pressure: 125 t Bending length: 3000 mm Frame width: 3100 mm Control unit: Cybelec VisiTouch 24MX Stroke: 300 mm Installation height: 500 mm Rapid traverse down: 200 mm/s Bending speed: 0–12 mm/s Total power requirement: 15 kW Machine weight approx.: 11,500 kg Dimensions: 4080 x 3110 x 1800 mm Standard equipment: Basic configuration: - CNC control Cybelec CybTouch 15 - Axes: Y1–Y2–X–R - Fully dynamic crowning system - System for compensating frame deflection – G-REFLEX - Backgauge system model GHP-4 - Servo-driven main motor - LED display at the press beam for visualizing positioning of the backgauge - Safety system: DSP AP+MCS - HAWE hydraulic system - CE standard compliant Dodpfx Aaex Sq Hlsaeki - Upper and lower tool clamping PROMECAM system, mechanical