Used Manual Arbor Press for sale (25,999)

Condition: used, Technical details: pressure: 63 t distance between columns: 900 mm no. of strokes: ca. 75 Hub/min ram adjustment: 80 mm stroke adjustable from - to: 3-100 mm Table dimensions: 900 x 600 mm throat: 310 mm dayligth: max. 350 mm drive power: 11 kW voltage: 380/220/24 V frequency: 50 Hz operating pressure: ca. 150 bar oil volume: 500 l safety distance: 150 mm Dsdpfxsu Nfnke Al Aewc passage opening in table: 200 mm total power requirement: 11 kW weight of the machine ca.: 4,0 t space requirements of the machine approx.: L:1,8 x B:1,8 x H:3,7 m DIFFERENTIAL PATH PRESS HIGH SPEED PRESS - High-speed press, C-stand - Compressed air connection: approx. 5 bar Condition. Press is not under power, without switch cabinet, sale as is. - Documentation available i.D. *

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar Dsdpfxju Nfq Ej Al Aowc total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm table surface area: L:1200xH:450 mm jaw width: 1000x200 mm Djdpfeu Nfrpex Al Aewc total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. *

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm Djdpfx Alju Nfuds Aewc surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s Djdpfxeu Nfv Us Al Aewc ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. *

Condition: used, Technical details: pressure: 0,9 t daylight dimension : table/slide up: 350 mm throat: 295 mm ram diameter: 40 mm Table dimensions: 600 x 330 mm height over floor: 935 mm weight of the machine ca.: - t dimension machine xH: 1,2 x 0,8 x 2,1 m Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation Dedpfxsu Nfw Se Al Aowc *

Condition: used, Technical details: pressure: manuell t stroke: 15 mm machine weight approx.: 8,4 kg dimensions of machine: 600x250x70 mm Pneumatic Cable Terminal Press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 15mm - tool fork: width=30mm ; length=70mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws i.D. Djdpfx Alsu Nfr Ns Ajwc *

Condition: refurbished (used), Year of construction: 1993, machine/vehicle number: 20658, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 4,800 mm, table height: 980 mm, throat depth: 305 mm, ram plate length: 4,500 mm, distance table to ram: 500 mm, clearance between the columns: 3,760 mm, oil tank capacity: 350 l, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, overall weight: 22,500 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Dwedszktg Aopfx Al Aoc Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, pressing force: 220 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table width: 120 mm, table length: 4,270 mm, table height: 900 mm, throat depth: 400 mm, ram plate length: 4,270 mm, distance table to ram: 400 mm, clearance between the columns: 3,820 mm, oil tank capacity: 350 l, total length: 5,370 mm, total width: 2,160 mm, total height: 3,275 mm, overall weight: 16,950 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM-10 220/4270 Touch-B Year of manufacture: 2010 Serial number: 33189 Technical specifications Force: 2200kN Working length: 4270mm Distance between uprights: 3820mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Turbo: PP5400 Dwodpsz Eqwlefx Al Ajc Approach speed: 120mm/s Working speed: 21mm/s Return speed: 200mm/s Weight: 16950 kg Motor: 37kW Oil capacity: 350 COMMAND CONTROL TOUCH-B • Table PP8170 V-axis • EFL 90/130 • Top tool clamping PP3090 – Wila • Back gauge X600 X’ R Z1 Z2 PP8096 • Safety: CE PP3580 – laser-safe • PP1115 manual front support: 2pcs • T-axis Heavy duty 200kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, overall weight: 12,000 kg, Used toggle-type cold forming press Manufacturer: SCHMID Type: T400 Year of manufacture: 1997 Dsdpfx Aloz E Dc Is Aowc Machine with standard accessories.

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm 2 printing units Weight: 3000kg Power supply: 400V Dwedpfjz E A I Asx Al Aec Year of production: 1994 Baldwin alcohol dampening Control panel Documentation and additional elements included.

Condition: used, Year of construction: 2008, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Including sound insulating cabin. Nominal force: 500 kN (50 tons) Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling BSV 75T DOUBLE SERVO FEEDER Dedpfezh Nnwox Al Aowc Type: tandem dual-feed servo unit, independently controlled tracks Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Dwedpfsz Dtaasx Al Ajc Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R Container for roll-off tipper trucks 20 m³ usable volume technically refurbished repainted in desired RAL color hook lift system on both sides discharge door hinged at the top Dwjdpfxezt Nirj Al Aec

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * Dwjdpfx Aloxfwdj Aoc * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Briquetting machine POR Oscar 9kW Average briquette output: 130-180 kg Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation Dodjxdahyspfx Al Ajwc CE mark Machine weight approx. 800 kg

Condition: excellent (used), mileage: 382,271 km, first registration: 07/2009, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, total length: 9,000 mm, total width: 2,600 mm, total height: 3,270 mm, loading space length: 6,950 mm, loading space width: 2,450 mm, loading space height: 2,100 mm, Year of construction: 2009, Equipment: AdBlue, tail-lift, Despite our careful attention to ensuring the data is entered correctly, we cannot be held responsible for any errors that may occur in this advertisement. Images may differ from the actual product. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino Dsdpjz E Nu Nefx Al Ajwc = More information = Front axle: Steered; Suspension: Leaf spring suspension Rear axle: Dual tires; Suspension: Air suspension Unladen weight: 7,065 kg Payload: 6,935 kg GVW: 14,000 kg Tail lift: Rear liftgate, 2000 kg Technical condition: very good Optical condition: very good Please contact Thierry Leemans for more information.

Condition: excellent (used), Catalog number: 7732 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1200 mm - Capacity: approximately 70 kg/h - Automatic machine operation - Motor: 7.5 kW - Max. operating pressure: 150 bar - Dust extraction outlet: 90 mm - Diameter of the filter bag opening: 500 mm - Max. bag height: 900 mm - Dimensions (L/W/H): 1950x1400x2700 mm - Weight: 1130 kg ADVANTAGES – Made in Italy – Option for direct connection of a sawdust extraction system – Used briquetting machine – DTR documentation available – Very good condition Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) Dwedpozw Dbkofx Al Ajc

Condition: excellent (used), Catalog number: 7984 TECHNICAL DATA - Clamping force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper diameter: 1000mm - Output: up to 10 briquettes/min, up to approx. 90 kg/hour - Automatic machine operation - Motor: 5.5kW - Dimensions (L/W/H): 1800x1200x1500mm - Weight: approx. 650kg ADVANTAGES - Made in Italy - Used briquetting machine - Unpainted - Very good condition Net price: 33900 PLN Dwedozwwxcepfx Al Asc Net price: 7884 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, mileage: 393,484 km, power: 120 kW (163.15 HP), first registration: 07/2014, fuel type: diesel, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, number of seats: 23, total length: 7,400 mm, total height: 3,100 mm, Year of construction: 2014, Equipment: ABS, = Additional Options and Accessories = Djdpfx Aloz E R A Ue Ajwc - Webasto = Further Information = Damage: none = Company Information = We are an international company based in Belgium, located in the Brussels area (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and offers a large premises serving as an exhibition area. We always have numerous buses of all brands, capacities, models, and price ranges in stock. We can find the right coach, school bus, or city bus for you, tailored to your needs and budget. All information is provided without guarantee. Errors, prior sale, and typographical mistakes excepted. Opening hours for viewing used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: used, Year of construction: 2014, power: 5 kW (6.80 HP), We are selling a container press! 1. Manufacturer – Ludden und Mennekes Type – LM20L Year of manufacture – 2014 Capacity – 20 m³ Motor power – 5.5 kW Dwodpfx Alsz Hbzqe Asc 2. PRESKONTAINER LM20L, 2011, 5.5 kW Price on request!

Condition: good (used), functionality: fully functional, Valmet Sunds pulp dewatering press / bleaching press * Roll diameter: 900 mm * Roll length: 2820 mm Dwodpfxsz Hc A As Al Aec * Roll speed: 2 - 15 revolutions/min * Roll gap: 3 - 13 mm

Condition: used, Technical details: pressure: 2 t passage: siehe Text mm stroke: siehe Text mm Pressing power: ca. 2 kN 5 pcs abor presses No. 2: throat 105 mm; distance ram-table 95 mm; ram stroke 36 mm; table L:120 x w:140 mm; weight 17 kg; dimesnions L:270 x W:220 x H:420 mm No. 3: throat 90 mm; distance ram-table 190 mm; ram stroke 45 mm; pressure force 3 kN; ram stroke adjustment travel 150 mm via hand wheel; table size : L:120 x W:160 mm; weight 26 kg; dimensions without wooden stand L:235 x B:160 x H:730 mm No. 4: Dwedpfx Aleu N Ay Rs Aoc throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel ; table size L:110 x W:160 mm; weight 30 kg; dimesnions without wooden stand L:230 x W:180 x H:700 mm No. 5: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel; table size L:110 x W:160 mm; weight 30 kg; dimensions without wooden stand L:230 x W:180 x H:700 mm, incl. device No. 7: throat 130 mm; distance ram-table 95 mm; ram stroke 20 mm; parallel clamper guided with 2 bolts with a return spring ; table size L:50 x B:80 mm; weight 17 kg; dimensions L:330 x W:160 x H:380 mm, incl. punch device *

Condition: ready for operation (used), Year of construction: 1984, stroke length: 60 mm, controller manufacturer: SIEMENS, Mechanical stamping press manufactured in 1984. This KAISER V50W High-Speed Press underwent a complete mechanical and electrical overhaul in 2022, featuring a new Siemens control system and a SEW 59 kW main motor. It offers a pressing force of 500 kN and a stamping speed of up to 400 strokes/min. If you are looking to get high-quality stamping capabilities, consider the KAISER V50W High-Speed Press we have for sale. Contact us for further details. • Retrofit/overhaul: Complete mechanical and electrical overhaul in 2022 (approx. €50,000) Dwodoz E Ikijpfx Al Aec • Stroke: 8–60 mm • Ram adjustment: 80 mm • Stamping speed: up to 400 strokes/min • Table size: 800 × 550 mm • Main motor: SEW 59 kW (installed 2022) • Control system: Siemens (new electrical system and cabinet in 2022) • Operator panel: Siemens SIMATIC HMI • Press force monitoring: UNIDOR • Condition: Very good, ready for operation Technical Specification Stamping Force 500 Kn

Condition: new, Year of construction: 2026, machine/vehicle number: ST-150, functionality: fully functional, pressing force: 150 t, stroke length: 450 mm, operating speed: 3 mm/s, reverse speed: 10 mm/s, table width: 1,500 mm, table length: 3,000 mm, table height: 750 mm, distance table to ram: 700 mm, total length: 3,000 mm, total width: 3,000 mm, total height: 2,750 mm, overall weight: 5,000 kg, Equipment: CE marking, documentation/manual, MODEL ST-150 Capacity t 150 Motor power kW 4 Working speed mm/s 2.3 Approach speed mm/s 7.4 Return speed mm/s 10 Dwedpfxjy E Iq Ue Al Aoc Maximum pressure bar 305 Piston stroke – J mm 450 Lower table mm 1,500 x 3,000 Head travel – C mm 1,000 Bridge travel – D mm 2,500 Front opening – A mm 1,550 Vertical opening – B mm 700 Working height – E mm 750 Overall front dimension – G mm 3,000 Overall side dimension – H mm 3,000 Overall height – I mm 2,750 Weight kg 5,000 STANDARD DESCRIPTION: We have designed motorized hydraulic presses with a movable frame and adjustable head from the ST series, offering a range of three different capacities from 80 to 150 tons. Specifically designed for straightening welded structures and plates cut with oxy-fuel or laser. Its design facilitates the loading and unloading of large volumes: parts, plates, or structures. It allows access to different pressure points without the need to move the workpiece, thanks to the lateral displacement of the cylinder and the longitudinal movement of the frame. STRUCTURE AND TABLES: The ST series hydraulic presses consist of an electrowelded structure made exclusively of S355JR steel. It is stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed using finite element software. All of this guarantees our high standards of precision and quality. The longitudinal travel of the frame. CYLINDER AND HYDRAULIC UNIT: Double-acting cylinder with lapped liner, chrome-plated piston, and maintenance-free wear-resistant guides. Cylinder actuation via a lever-operated hydraulic distributor. It is equipped with a removable wiper to prevent piston damage. Two-speed motorized hydraulic unit with automatic disengagement of the approach speed by hydraulic pressure and a relief valve. ELECTRICAL INSTALLATION AND SAFETY: Electrical installation equipped with a motor guard with emergency stop. Supplied with a glycerin-filled pressure gauge with reading in tons and hydraulic oil. Complies with and meets all essential safety and health requirements according to CE regulations. Supplied with an instruction manual.