Used Manual Arbor Press for sale (24,559)

Condition: good (used), Year of construction: 1992, functionality: fully functional, Pressure: 200 t Bending length: 3050 mm Distance between uprights: 2550 mm Nwodpfjxb Sugox Afaof Ram stroke: 274 mm Control: Cybelec ModEva Pac Approx. machine weight: 17,000 kg Accessories/Equipment: - Control conversion to Cybelec ModEva Pac - 2 bending aids in front of the machine - Fiessler light curtain in front of the machine - Foot switch

Condition: used, Year of construction: 1996, functionality: fully functional, Pressure 160 t Bending length 3000 mm Nwjdex A Eucopfx Afasf Machine weight approx. 16 t Equipment: - Two-hand foot pedal - CNC control Cybelec DNC 800 - Hydraulic upper tool clamping - Hydraulic crowning - Hydraulic lower tool clamping - 5 manually adjustable backgauge fingers - Die displacement - Tool package - Side safety doors - Controlled axes: y1, y2, x, R

Condition: used, Year of construction: 2000, Control system retrofit 2026: CybTouch 15 Windows Press force 100 t Bending length 3100 mm Nedpfjwn Ebvex Afaswf Stroke 215 mm Safety distance 350 mm Frame width 3250 mm Compressed air max. 8 bar Closing speed 200 mm/s Pressing speed 1-10 mm/sec Total power requirement 7.5 kW Machine weight approx. 8,000 kg Dimensions L-W-H 3450x2000x2800 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Press force: 85 t Bending length: 2750 mm Upright width: 2260 mm Total power requirement: 17 kW Machine weight approx.: 8,300 kg Space requirements approx.: 3800 x 2300 x 2400 mm Accessories/Equipment: Nwedsyvhzuopfx Afajf - 2 support arms in front of the machine - 2 backgauge fingers - Light barrier in front of the machine - Safety guard at the sides and rear of the machine - Die shift - 6-axis backgauge - Trumpf TASC 6000 control - Wila tool holder - Operating hours: 75,000 h

Condition: good (used), Year of construction: 1995, functionality: fully functional, stroke length: 240 mm, throat depth: 300 mm, oil tank capacity: 200 l, total length: 4,500 mm, total width: 2,200 mm, total height: 3,000 mm, controller manufacturer: CYBELEC, controller model: CybTouch 15, working width: 3,550 mm, bending force (max.): 125 t, distance between stands: 3,050 mm, control type: CNC control, type of crowning: manual, Equipment/Accessories: - Manual crowning - 3 x manual backgauge fingers - Pneumatic die shifting - Pneumatic upper tool clamping - Foot switch - Cybelec CybTouch 15 (new 2025) - Set of upper and lower tools Nwjdpfxjywr D Ao Afajf

Condition: used, Year of construction: 1998, Pressure 130 t Bending length 3550 mm Column width 3050 mm Stroke 250 mm Cybelec control system Machine weight approx. 11,600 kg Nwedpfx Afewgkwtoasf Space required approx. 4000 x 2000 x 3000 mm Accessories/Equipment: - CYBELEC DNC 70 control system - 2 support arms - 2-hand foot control - Wila tool holders, top and bottom - Crowning - Side guards - 4 manually adjustable stop fingers - Controlled axes: y1, y2, x, R

Condition: used, Year of construction: 2011, Pressure 100 t Bending length 2050 mm Stroke 315 mm Nwjdjwn D U Uopfx Afaof Weight 8,000 kg Accessories: -Support arms -Lasersafe

Condition: excellent (used), functionality: fully functional, Pressure: 130 t Bending length: 3150 mm Distance between uprights: 2600 mm Motor power: 15 kW Control: CYBELEC VisiTouch Machine weight approx.: 10,900 kg Space requirement approx.: 3990x1750x2900 mm Nwjdpeyvh Dvofx Afasf Equipment: - Controlled axes: Y1, Y2, X, R, Z1, Z2, X1 - Fully dynamic hydraulic crowning

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Clearance between frames: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-working speed: 10/25 mm/sec Y-rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Nsdpfxoyz Rwie Afajwf Operating hours: 3,297 h

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, Joos vacuum table with silicone membrane Versatile press suitable for veneering, coating, form gluing, 3D veneering, and edge banding, among other applications. With certain limitations, this press can serve as an alternative to a hydraulic veneer press. Features a new, heat-resistant silicone membrane—extremely stretchable and easy to clean. Also suitable for thermoforming preheated thermoplastic materials such as acrylic glass or solid surface materials. Internal frame dimensions approx. 2900 x 1410 mm, usable area approx. 2800 x 1300 mm. Working height approx. 900 mm. Nwsdpfoy Hl Hpox Afasf Equipped with a Becker VT4.40 vacuum pump, 400V, 1.5 kW with 40 m³/h output, and two 200-liter vacuum tanks for convenient operation and rapid evacuation. Electronic vacuum pressure switch automatically stops the pump once the preset vacuum is reached, preventing continuous operation. Mobile on four lockable swivel casters. Frame can be easily lifted and secured with two catches. Double-frame design allows for fast membrane exchange. Currently fitted with a new silicone membrane. The grooved base plate ensures rapid vacuum distribution. CE marking. Original paintwork, with touch-ups in some areas. The silicone membrane and base plate have been replaced – the machine is immediately ready for use. Dimensions approx. 3100 x 1550 x 1020 mm (LxWxH). Weight approx. 550 kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse – see “More offers from this seller.”

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Nwjdju Thhropfx Afaef Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Nodpfx Ajx A U Ncjfaowf Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: ready for operation (used), functionality: fully functional, -----Konica Minolta Press C 1060 with 1.3 million prints----- Tested and ready to operate! Equipment: - fiery ic308 + faci bundle - RU 509 - PF 707 VACUUM PAPER FEEDER OPTION - DF Nsdpowx Ey Tjfx Afaswf - FS 532 - Video of the machine in operation available upon request As an experienced reseller of used copiers, we have developed real expertise in packaging and pallet shipping, ensuring that our customers receive machines in perfect condition. We ship copiers sourced from and serviced by Konica Minolta France. If you have any questions, please don't hesitate to ask. Our company offers the widest range of Konica Minolta production copiers and arranges worldwide deliveries upon request. Feel free to contact us for further information.

Condition: good (used), Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 20 x 70 mm -Length: 3020 mm Nwsdod S D Dnepfx Afajf -Weight: 22 kg

Condition: good (used), Karl Krause Large Bookbinding Press with Tapping Block The machine is fully operational and ready for operation. Manufactured by Karl Krause, Germany. The press has a tapping block that increases the pressing force. Nodpfjy Hglyox Afaowf Pressure: 5 tons Plate dimensions: 550 x 490 mm

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Njdpsvviytsfx Afaswf

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Nwedpfx Aevvkmbjfaef Storage location: Nattheim

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Nsdpfx Afsvvkl Djajwf Storage location: Nattheim

Condition: like new (used), Year of construction: 2021, Pellet production Line for sale ! Manufacturer - GENERAL DIES Capacity - 2,5-3,0 T/h Nodpfx Aey Hfy Njfaswf Year - 2021 , with Press General Dies never used 2026

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier Nwjdpfx Afoiwfp Tsasf - 24 months warranty - Commissioning, training

Condition: new, Year of construction: 2023, Immediately available, highly upgraded CNC press brake YAWEI PBH220/4100-7C - Pressing force: 2200KN - max. bending length: 4100mm Nwodpfx Afeqgcq Hoaof - Year of construction 2023 - CNC controlled hydraulic crowning - Cybelec VISITOUCH 19T control - 7 CNC controlled axes - Y1/Y2, X, R, Z1 + Z2, X1 (Delta X) - Mechanical quick clamping upper tools type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 month guarantee - Commissioning, training

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 3,100 mm, distance between stands: 2,600 mm, warranty duration: 24 months, control type: CNC control, degree of automation: automatic, number of support arms: 2, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, safety light barrier, Immediately available, highly upgraded CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2024 - CNC controlled hydraulic crowning - DELEM DA66S - 4 CNC controlled axes - Y1/Y2, X, R - Mechanical quick clamping upper tools type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 month guarantee - Commissioning, training Nwjdpjyvzhnofx Afaof

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 70300 € 1328.67 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Nwjdpfx Ajwiqq Sofaef Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00

Condition: excellent (used), Year of construction: 2016, operating hours: 12,730 h, pressing force: 170 t, stroke length: 445 mm, throat depth: 420 mm, overall weight: 12,500 kg, Hydraulic Press Brake Manufacturer: TRUMPF Model: TruBend 5170 Excellent condition, year of manufacture 2016 Technical Specifications - Manufacturer: TRUMPF - Model: TruBend 5170 - Year of manufacture: 2016 - Usable bending length: 3230 mm - Pressing force: 170 t - Weight: 12,200 kg - Connected load: 28 KVA - Free clearance between frames: 2690 mm - Throat depth: 420 mm - Table width: 180 mm - Installation height: 615 mm - Stroke: 445 mm - Upper tool height: 110–390 mm - Closing speed of ram: 220 mm/s - Dimensions (LxWxH): 4250 x 2050 x 3000 mm Equipment: - Controller: TRUMPF TASC 6000, 15" TFT screen - Interfaces: parallel, RS 232, USB, Ethernet - 2 movable support arms - 1 CNC-controlled bending aid incl. parking position on the right - Rear safety enclosure, electrically closable - CNC-controlled crowning - Pneumatic die shifting - Hydraulic tool clamping top and bottom incl. LED lighting at the front - Controlled axes: Y1, Y2, X, X1 R, Z1, Z2 - BendGuard light barrier (for 220 mm/s) - Documentation - 2 upper tool sets (straight & gooseneck) - 5 lower tool sets All specifications are without guarantee. The machine is currently still located at the seller's facility in the Stuttgart area and can be inspected under power by appointment. The company is a very small business that is now closing due to retirement. Nwodpfx Asy Hbxnofajf The main photo has been altered with AI assistance. Complete original images are available upon request.

Condition: good (used), Offer consisting of: SM102-2P, year of manufacture 2000, CP2000 remote ink control, impression count: 200 million, new rollers, Technotrans, Autoplate, chrome cylinder, Nwjdpey Hbp Tjfx Afaof