Used Homogenizer for sale (256)

Condition: excellent (used), Here we offer a Weiss climate testing chamber. Weiss climate testing chamber, water-cooled Lsdpfezgavvex Aftsad (Refrigerant converted to R-452A) Temperature testing Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature -42°C Maximum temperature +180°C Temperature change rate, cooling 4 K/min Temperature change rate, heating 3.2 K/min Temperature deviation, time-based ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K Climate testing: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH Temperature deviation, time-based ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, time-based ± 1 to ± 3 % RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4.1 kW Rated current: 14 A Refrigerant: R-452A Type: WK3-340/40 Weight Approx. 515 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 1996, condition: ready for operation (used), A complete liquid egg and egg product pasteurization plant by Südmo/KMA is available. Main processes: egg breaking, filtration, pasteurization, cooling, homogenization. 1) Sanovo Type 3000 egg breaking machine, year of manufacture: 1991. 2) Südmo/KMA K21-FS/4235 pasteurization plant, year of manufacture: 1996, medium: liquid egg, throughput: 1500l/h, temperature profile: 15°C/64°C/6°C, cooling medium: ice water, ice water temperature: 1°C, ice water demand: 7500l/h, heating medium: hot water, hot water temperature: 65°C, hot water demand: 5000l/h, heat recovery: 70%, holding time: 360s. 3) APV Gaulin homogenizer. 4) Terlet process tank, volume: 10m³. 5) Clivet WSAT-XIN 30.2 water chiller, year of manufacture: 2018, refrigerant: R-410A, refrigerant charge: 9kg. Including pumps, agitators, tanks and additional accessories. Documentation available. An on-site inspection is possible. Ledpfxszidh Io Aftjad

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,200 mm, total height: 2,400 mm, total width: 1,700 mm, overall weight: 1,500 kg, EASY-TO-TRANSPORT ELECTRIC OVEN – NO ASSEMBLY REQUIRED!!! This system comprises an industrial electric oven with internal dimensions of 1700 × 3200 × 2100 mm, engineered to deliver consistent and reliable thermal processing for demanding applications. The key feature of this oven is that it can be transported in its assembled state, eliminating the need for on-site assembly. The oven is powered by a high-efficiency electric heating unit (2200 × 2100 × 300 mm), equipped with 3 resistance blocks (a total of 9 heating elements), providing a total installed power of 27 kW. This configuration ensures uniform heat distribution and provides sufficient energy for stable and efficient operation under continuous workloads. To optimize internal air circulation and thermal performance, the system incorporates 2 Ø350 mm impellers, driven by 2 electric motors of 1.5 kW each (2 HP). This setup guarantees enhanced airflow dynamics, contributing to homogeneous temperature distribution throughout the chamber. The oven is fully insulated using 180 mm high-density thermal panels, significantly reducing heat loss while ensuring maximum energy efficiency and complete chamber sealing. This construction supports stable operating conditions and minimizes energy consumption. Additionally, the unit is equipped with an advanced control panel featuring all essential functions and operational parameters. The interface is designed with a strong focus on user-friendliness and operational flexibility, allowing the operator to easily adjust and control the system according to specific production requirements. Ledpfxjyzw Ihs Aftsad Why this system excels: High power output (27 kW) Optimized airflow system (dual motor + impellers) Heavy-duty insulation (180 mm panels) User-friendly and fully functional control system Designed for reliability, efficiency, and industrial performance.

Condition: used, Year of construction: 2010, machine/vehicle number: LC539, Used Aseptic Filling Line Tetra Pak A3 FLEX 1000S up to 9000 l h Laodpfx Asv Ai Haeftsd The Used aseptic filling line Tetra Pak A3 FLEX 1000S up to 9000 l h provides an advanced solution for aseptic bottling of liquid products. Specifically, it can reach a production capacity of 9000 liters per hour. This line ensures maximum efficiency and reliability when filling dairy products and juices. Moreover, its fully integrated aseptic process preserves the organoleptic and microbiological characteristics of the product. Main Components of the Aseptic A3 Flex 1000S line Homogenizer and Sterilizer – 12 tons per hourThe homogenization and sterilization system of the Used aseptic filling line Tetra pak A3 FLEX 1000S up to 9000 l/h stabilizes the product and eliminates microorganisms through controlled thermal treatment. Furthermore, its 12 tons per hour capacity allows it to handle large volumes while maintaining product quality and safety. Alsafe Tank – AsepticThe Tetra Alsafe tank stores products aseptically before filling. As a result, its food grade certified materials ensure complete isolation and prevent contamination risks. Tetra Pak CIP System The Cleaning In Place CIP system automates line sanitation. Consequently, it cleans all product contact parts internally, reducing downtime and improving operational efficiency. Tetra Pak A3 FLEX 1000S Filling MachineThe A3 FLEX 1000S filling machine forms the core of the Used aseptic filling line Tetra Pak A3 FLEX 1000S up to 9000 l h. Specifically, it fills dairy products and juices aseptically in carton containers. In addition, it ensures high dosing precision, thereby minimizing waste and guaranteeing excellent packaging quality. CAP21 Capping MachineThe CAP21 capping machine seals containers hermetically, thus preventing contamination and extending shelf life. Additionally, its seamless integration with the filling machine maintains an uninterrupted workflow. ACHX30 Accumulator 47 metersThe ACHX30 accumulation system optimizes package flow along the production line. Consequently, it reduces downtime and enhances overall bottling efficiency. Tetra Pak Film Wrapper 67 Shrink WrapperThe Film Wrapper 67 shrink wrapper of the Used aseptic filling line Tetra pak A3 FLEX 1000S up to 9000 l/h provides secondary packaging by wrapping products in plastic film. In turn, this step improves...

Year of construction: 2021, condition: new, Model SLP-30/O Worksize dimensions 1200 width x 1800 height x 3000 depth Overall dimensions 1560 width x 2410 height x 3300 depth Power supply Electric Nominal power 27kW Voltage 380V Frequency 50-60Hz Door type: one sided Anti-Ex Schloss Homogeneity < ± 3.0°C if 180°C Temperature stability < ± 3.0°C Temperature max. 230° C Transport Ground (Rail in the floor) Heaters Exchangeable roof heating panels Laedpfx Afobuyrnotsd Circulation Vertical Ventilator Radial assembled on exchangeable panel Air flow Variable through holes on the walls Ventilation performance 1500m3/h Motor power 1,5kW Capacity 6480L Warranty 12 months

Condition: ready for operation (used), functionality: fully functional, The SERIA 4-head filling machine automates the dosing of liquid, semi-liquid, pasty food products, or those containing inclusions. Thanks to its four synchronized filling heads, it ensures precise, homogeneous, and rapid filling of containers. This allows manufacturers to improve their production rate while reducing material losses and dosage variations. Furthermore, this system integrates a MASO SPS-2 sinusoidal volumetric pump, which is renowned in the food industry for its particularly gentle transfer. Unlike traditional pumping systems, this technology preserves the texture of sensitive products while maintaining a constant flow rate. Consequently, the machine is perfectly suited for sauces, purees, ready meals, meat preparations, catering products, fillings, and recipes containing pieces. In addition, the pump limits shear, reduces pulsations, and facilitates clean-in-place (CIP) cleaning, depending on the system configuration. Laodjzh Hilopfx Aftod Moreover, the design, entirely made of stainless steel, facilitates daily cleaning operations and meets the hygiene requirements of food processing plants. As a result, the filling machine can be easily integrated into an existing packaging line, whether for high-volume artisanal productions or automated industrial lines. It also guarantees excellent repeatability of dosages, which directly contributes to the quality of the finished products. Finally, Europ'Équipement completely reconditions this filling machine before it is offered for sale. Our technicians inspect each mechanical, hydraulic, and pneumatic component, replace worn parts when necessary, and then carry out comprehensive tests before putting the machine back into service. Thus, this SERIA 4-head filling machine represents a reliable, economical, and durable solution for modernizing a production line while controlling investment costs. Technical specifications: Manufacturer: SERIA Constructeur Machine type: Automatic 4-head food filling machine Year of manufacture: 2008 Number of filling heads: 4 Construction: Food-grade stainless steel Dosing pump: MASO Process Pumpen SPS-2 Pump technology: Sinusoidal volumetric pump with low shear Compatible with liquid, pasty, and highly viscous products Suitable for products containing pieces Consistent flow rate with low pulsation Clean-in-place (CIP) possible, depending on line configuration

Condition: used, We offer a used brine mixing system from Schröder Maschinenbau GmbH designed for preparing brines used in meat processing and food production. The system is designed for fast and efficient mixing of brines, including those with high levels of dry solids such as salt, phosphates, spices, processing aids, and functional ingredients. The system consists of two tanks—a preparation tank and a storage tank. This configuration allows for the simultaneous preparation of a new batch of brine and the storage of the finished mixture for further processing. The system is equipped with two high-performance pumps, analog control of the brine preparation process, and a cooling system that helps maintain the proper temperature of the mixture. Schröder brine mixer units enable the rapid production of a homogeneous brine, which is crucial for subsequent production stages such as injection, massaging, curing, and marinating. Properly prepared brine ensures the uniformity of the production process, production consistency, and the quality of the final product. The system can be used in meat processing plants, poultry processing plants, and facilities producing cold cuts, hams, cured products, marinated products, and other items requiring brine preparation prior to injection or massaging. Schröder Maschinenbau GmbH – a brine mixing system with 2 tanks, consisting of: brine preparation tank finished brine storage tank two high-capacity pumps brine mixing and circulation system analog process control panel brine cooling system piping and process valves stainless steel structure connections to the downstream process Technical Specifications: Lodpfx Afszhwkmetsad Manufacturer: Schröder Maschinenbau GmbH Equipment Type: brine mixing system Year of Manufacture: 2001 Number of Tanks: 2 Tank Types: preparation and storage Number of Pumps: 2 Control: analog Cooling System: yes Power Supply: 400 V Frequency: 50 Hz Power: 4 kW Rated current: 9 A Compressed air: 8 bar Length: 2400 mm Width: 1400 mm Height: 2400 mm Key advantages: rapid preparation of homogeneous brine capability to process large amounts of dry matter two tanks—a preparation tank and a storage tank two high-performance pumps brine cooling system analog process control Stable preparation of brine for injection and massaging Improved repeatability of the production process Positive impact on the quality of the final product Stainless steel construction Renowned manufacturer Schröder Maschinenbau GmbH

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, total length: 1,500 mm, total width: 1,200 mm, total height: 1,700 mm, The COUDERT capping line is a complete industrial solution designed for filling, capping, and packaging liquid, semi-liquid, or pasty food products. Designed to automate several production steps within a single installation, it improves throughput, dosing accuracy, and packaging consistency while reducing manual handling. Lines of this type are used in the sauces, jams, honey, condiments, ready-made meals, dairy products, and other food preparations sectors that require precise dosing and secure sealing. This installation consists of four complementary pieces of equipment: a COUDERT pneumatic dosing unit, a capper, a steam generator, and an accumulation table. The dosing unit operates according to a volumetric principle using a syringe-type piston, ensuring excellent dosing repeatability. The containers are then transferred to the capper, which ensures consistent closure of the packages. The steam generator is used for operations requiring heat treatment of the caps, while the accumulation table streamlines production flow at the end of the line to prevent interruptions and bottlenecks. The entire line promotes continuous production, improves packaging quality, and facilitates the organization of workstations. Thanks to its industrial design, it can be easily integrated into production workshops seeking a reliable solution for automating filling and capping. Its modular architecture also facilitates cleaning and maintenance operations, meeting the requirements of the food industry. Lajdsu Ibb Depfx Aftsd At Europ'Équipement, this line undergoes a complete technical inspection before being marketed. Each piece of equipment is inspected, refurbished if necessary, and then tested to ensure a high-performance, durable, and immediately operational solution. Technical specifications: Capping line: Manufacturer: COUDERT Type: Complete capping line Year of manufacture: 2015 Composition: Pneumatic dosing unit • Capper • Steam generator • Accumulation table Line length: 1,500 mm Width: 1,200 mm Height: 1,700 mm Pneumatic dosing unit: Volumetric operation with piston (syringe principle) Dosing chamber controlled pneumatically Product suction by pneumatic cylinder Product ejection by dosing piston Repeatable and homogeneous dosing Accumulation table: Dimensions (L × W × H): 920 × 680 × 900 mm Accumulation of packages at the end of the line Regulation of production flow Reduction of the risk of conveyor saturation Capper: Automatic closure of containers Direct integration into the packaging line Steam generator: Steam generation for capping operations requiring heat treatment Integrated into the production line paptqncp - 8dyylcg0 - uzhbw342

Year of construction: 2017, condition: ready for operation (used), Granulation line, regranulation extruder, Yei machine Ljdezhm Ihepfx Aftjad I. PE/PP waste regranulation line, model: YDN-120 Material: PP/PE Maximum capacity: PP: 550 kg/h PE: 650 kg/h Installed power: 420 kW Power consumption during operation: approx. 250 kW Water consumption: approx. 25 l/min Required water pressure: 3 kg/cm² 1) Extruder Designed for double degassing Double-stage gearbox Screw diameter: 120 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 32:1 Rotation speed range: 0-130 rpm Heater power consumption on the barrel: 51 kW Number of heating zones on the barrel: 5 Barrel cooling: 1/8 HP x 5 fans Motor: 175 HP, controlled by a frequency inverter 2) Screen changer, 15 HP Filter area: 90,639 mm² x 2 Equipped with a pressure sensor with alarm. In case of excessive pressure, the machine will automatically shut down. One temperature control zone. 3) Knife system for granulating at the extruder head Number of knives: 4 pcs Temperature control: 1 zone Heating power: 3.5 kW 2 heads for PE 4) Water cooling system Motor: 5 HP, controlled by a frequency inverter 5) Shredding and pre-compacting drum Vertical type with temperature sensor Motor power: 150 HP, controlled by a frequency inverter Equipped with 12 rotary knives and 17 stationary knives Mill diameter: 1300 mm Blower: 7 1/2 HP Continuous water cooling device 6) Belt conveyor Dimensions: 4950 mm (length) x 670 mm (width) Motor: 2 HP 7) Vibrating dryer Water pump: 5 HP x 1 Vibration motor: 1/4 HP x 4 pcs Water tank dimensions: 3615 mm x 700 mm x 471 mm 8) Regranulate silo (with a centrifugal blower of 7.5 HP with a transport pipe) 9) Control panel Indicates the operating status of all major electrical devices The machine is equipped with a double cylinder screen changer, allowing for screen changes without stopping the machine. The line is designed in a compact way, which saves usable space. The device requires maintaining the cooling water temperature: 25-35°C Equipment: Enlarged drum to 1300 mm with 150 HP motor Second degassing port on the first screw with a vacuum pump Metal detector 5 HP centrifuge Second "cascade" plasticizing module (150 mm screw) with filter with a single degassing port and vacuum pump double-stage gearbox Parameters of the second plasticizing module Screw diameter: 150 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 20:1 Rotation speed range: 0-130 rpm Number of heating zones on the barrel: 2 Motor: AC 75 HP, controlled by a frequency inverter Control panel Hydraulic screen changer x 2 cylinders Additional equipment Increased filter area on the first screen changer: Standard: diameter 140 mm x W126 mm = 55,389 mm² x 2 After enlargement: diameter 204 mm x W141.5 mm = 90,639 mm² x 2 The delivery includes additional cooling for the control cabinets Static mixer with a connecting pipe for homogenization and uniformization of the mass.

Condition: excellent (used), Vötsch VC 4034 Climate Chamber / Temperature Chamber Description: For sale is a used climate and temperature chamber from the manufacturer Vötsch Industrietechnik. This unit is suitable for demanding temperature and climate tests in research, development, quality assurance, the electronics industry, automotive technology, as well as material and aging tests. The test chamber has been converted to the modern refrigerant R452A and features a user-friendly touch panel control. Thanks to the large test chamber volume of approximately 335 liters, the system is suitable for both individual test specimens and for extensive test setups. Technical data: Laedjzd Dm Hopfx Aftod Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) External dimensions: approx. 780 x 1758 x 1800 mm (W x D x H) Weight: approx. 515 kg Temperature range: -40 °C to +180 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Heating rate: approx. 3.2 K/min Cooling rate: approx. 3.5 K/min Climate operation: Temperature range: -40 °C to +180 °C Humidity range: 10 % to 98 % RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature homogeneity spatially: ±0.5 to ±1.0 K Refrigerant: R452A Filling quantity: 2.5 kg GWP: 2141 CO₂ equivalent: 5.35 t ND max.: 22 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment: Touch panel control Programmable test sequences Stainless steel interior Viewing window in the door Test chamber lighting Air circulation system Side feedthrough for measuring cables Several stainless steel insert shelves Air-cooled refrigeration system Documentation available Application areas: Temperature testing Climate testing Material testing Electronics testing Aging tests Environmental simulation Quality assurance Research and development Automotive testing Condition: Used Optical condition as shown in the pictures. Maintenance and calibration stickers are present. Refrigeration circuit converted to R452A. Scope of supply: 1x Vötsch VC 4034 Climate Chamber Stainless steel insert shelves Touch panel control unit Documentation / Documents Accessories as shown in the pictures Subject to changes and errors in the technical data. Subject to prior sale.

Condition: excellent (used), Eos EOSINT We are offering an Eos EOSINT plastic laser sintering system for sale. The EOS P380 system includes the following components: Build chamber container Powder container Overflow container 3DM 8-zone process chamber heater, 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin Build volume: 350mm x 350mm x 610mm Power supply: 3/N/PE/400V AC Frequency: 50 Hz Connected load: 8 kW Fuse protection: 32 A Maximum laser power: 100 W Laser class (open): 4 Laser class (closed): 1 Weight: 850 kg Model: EOSINT P 380 Condition: used Laodpfxszdyxle Aftsd Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Eos EOSINT plastic laser sintering systems Here, we offer an Eos EOSINT plastic laser sintering system. Eos EOSINT plastic laser sintering system P380 The following items are included with the EOS P380 system: Build volume container Powder container Overflow container Cooler: Termo TEK thermochiller, type: 802-18644-3 Unpacking ram Removal carriage 3DM 8-zone process chamber heater 250°C Each zone can be adjusted individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg Type: EOSINT P 380 Ledszdywzepfx Aftead Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer you an inspection system for crystalline silicon solar modules. Reliable quality assurance and process control throughout the entire solar module production. The Dr. Schenk SolarInspect series was developed to meet the specific requirements in the production of crystalline silicon solar modules. These ready-to-use vision systems provide reliable quality control for the entire ongoing production process. Furthermore, continuous monitoring of the production process allows for timely corrective measures to be taken in the event of process deviations. In the production of crystalline silicon solar modules, textured glass substrates are used instead of uncoated glass. Textured glass increases the transmission of sunlight. The optical signals in the vision system, triggered by the surface structure typically used for glass substrates in silicon solar modules, are often similar to or even stronger than those of the actual defect being inspected. Dr. Schenk has developed and manufactured SolarInspect, a system that specializes in the precise differentiation between glass structure and defects on the entire material surface, including the edges. Thanks to an innovative optical design, Dr. Schenk's inspection system can clearly detect glass defects and distinguish them from the glass structure. Reliable inspection of: - Uncoated incoming glass - Uncoated textured glass - Coated glass, e.g., AR (anti-reflective) coated - Layer application - Finished modules Detection of: - Sheet glass defects, e.g., bubbles, inclusions, scratches - Dimensions - Edge defects - Layer defects, homogeneity and thickness of AR-coated glass SolarInspect - Exceptional performance features: - Innovative and modular optical design - Low operating costs - Ready-to-use vision systems optimized for specific process step requirements - Customized solution for all types and sizes of solar modules Lasdpfx Afozdtgietsd - Repeatable detection and evaluation - User-friendly quality and analysis tools for production control and process analysis - Easy integration into new and existing lines - Industrially proven design Type: SolarInspect Condition: used Sale is ex works. Scope of delivery: (See image) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, LASKA FZ 175 | Emulsifier / Meat Emulsifying Cutter (Micro-Cutter) Manufacturer: LASKA Model / Type: FZ 175 Serial number: 14127 Year of manufacture: 2012 Power supply: 400 V | 3 Ph | 50 Hz | 155 A Power: 91 kW Diameter: 175 mm Dimensions: 2350 x 1180 x 1300 mm Laedpezgxr Nofx Aftod The LASKA FZ 175 is a professional industrial emulsifier, a technologically advanced machine that is a key component of modern meat processing lines. This device is designed for continuous operation in medium and large-sized facilities. It is used for ultra-fine, finely granular processing, emulsification, and homogenization of fillings for sausages, frankfurters, pâtés, mortadella, and other similar products. It performs exceptionally well where a perfectly smooth, stable emulsion structure with minimal air bubbles is essential. The core of the machine is a unique, multi-stage geometry of the cutting system, working in conjunction with a 175 mm diameter disc and driven by a powerful 91 kW motor. The LASKA FZ 175 is distinguished by its patented electro-hydraulic system for automatic adjustment of the knife pressure against the disc. This solution guarantees constant, optimal cutting conditions while minimizing friction. In practice, this allows for a reduction in the wear of the working parts by up to 50% compared to traditional emulsifiers, drastically reducing operating costs and eliminating the risk of overheating the raw material.

Condition: excellent (used), Vötsch VC³ 4018 Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018 Machine Type: Climate Test Chamber / Temperature Test Chamber Design: Air-cooled Test Chamber Volume: approx. 190 liters For sale is a used climate test chamber from the manufacturer Vötsch. The VC³ 4018 is suitable for temperature and climate tests, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development applications. Technical Data: Temperature Range: -40 °C to +180 °C Temperature Change Rate (Heating): approx. 4 K/min Temperature Change Rate (Cooling): approx. 4 K/min Max. Heat Compensation in Temperature Operation: approx. 2300 W Temperature Deviation (Time): ± 0.1 to ± 0.5 K Temperature Homogeneity (Spatial): ± 0.5 to ± 1.5 K Climate Range (Temperature): +10 °C to +95 °C Dew Point Range: -3 °C to +94 °C Humidity Range: 10 to 98 % RH Temperature Deviation (Time) in Climate Operation: ± 0.1 to ± 0.3 K Temperature Homogeneity (Spatial) in Climate Operation: ± 0.5 to ± 1 K Humidity Deviation (Time): ± 1 to ± 3 % RH Heat Compensation in Climate Operation: approx. 400 W Laodpfx Aezc Ht Ioftod Test Chamber Dimensions (approx.): 580 x 450 x 750 mm (W x D x H) Housing Dimensions (approx.): 870 x 1550 x 1800 mm (W x D x H) Weight (approx.): 470 kg Refrigerant: R404A Refrigerant Quantity: 2.50 kg ND max.: 22.5 bar g HD max.: 25 bar g Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 4.1 kW Rated Current: 14 A Test Chamber Lighting: Halogen, 2 x 24 V / 50 W Equipment Touch Panel Operation Viewing Window in the Door Stainless Steel Test Chamber Test Chamber Lighting Side Pass-Throughs Shelves / Interior Fittings as Shown in Pictures Documentation / Operating Manual Further Accessories as Shown in Pictures Condition Used Optical Condition as Shown in Pictures Scope of Delivery as Shown Inspection Possible by Appointment Safety Note For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Due to the size and weight, shipping by freight forwarder is recommended. Scope of delivery as shown. Subject to change and errors in the technical data, as well as prior sale.

Year of construction: 2026, condition: new, functionality: fully functional, New machine with a 24-month warranty Stainless steel model Advantages: + Mobile unit with locking castors Lajdpfx Afeivdnvstod + Completely made of stainless steel + For the production and preparation of pastry dough, baking cream, chocolate, fondant, fruit jam, coatings, fillings, as well as for any product requiring uniform heating and mixing + Thermal oil circulates in the double-walled tank, designed for safe and easy use + Triple-walled construction for optimal thermal insulation + With side and bottom scrapers + Electronic thermostat for setting the cooking temperature + Manual / automatic operation possible + Digital temperature display with timer + The tank can be easily tilted for emptying via a handwheel (optional: with a drain tap) + Two working speeds + Safety switch in case of overheating SPECIAL optional accessories, available at an extra cost: - Drain tap for quick and easy emptying: + €880.00 net - Machine with frequency inverter for stepless stirring speed: + €1,115.00 net - Double mixing tool for particularly homogeneous mixing: + €725.00 net - Higher temperature (instead of 150 °C, up to 180 °C possible) + €900.00 net Technical data: - Capacity: 30 liters - Max. temperature: 150 °C (optional up to 180 °C) - Thermal oil volume: 12 liters - Heating power: 4 kW - Motor power: 0.37 kW / 0.45 kW (1st / 2nd speed) - Connection values: 400 V - 3Ph - 50Hz - 16A CEE plug - Dimensions: 960 x 725 x 1530 mm (W x D x H) - Filling height: 1100 mm - Net weight: 121 kg

Year of construction: 2024, condition: new, functionality: fully functional, New machine with a 24-month warranty Stainless steel model Advantages: + Mobile unit with locking castors + Completely made of stainless steel + For the production and preparation of pastry dough, baking cream, chocolate, fondant, fruit jam, coatings, fillings, as well as for any product requiring uniform heating and mixing + Thermal oil circulates in the double-walled tank, which is designed for safe and easy use + Triple-walled construction for optimal thermal insulation + With side and bottom scrapers + Electronic thermostat for setting the cooking temperature + Manual / automatic operation possible + Digital temperature display with timer + The tank can be easily tilted via a handwheel for emptying (optional: with a drain valve) + Two working speeds + Safety switch in case of overheating SPECIAL accessories, optionally available at an extra charge: - Drain valve for quick and easy emptying: + €880.00 net - Machine with frequency inverter, for stepless stirring speed: + €1,115.00 net - Double mixing tool, for particularly homogeneous mixing of products + €815.00 net Lsdpfx Ajivduboftead - Higher temperature (instead of 150°C, up to 180°C possible) + €990.00 net Technical data: - Capacity: 60 liters - Max. temperature: 150°C (optional up to 180°C) - Thermal oil volume: 17.5 liters - Heating power: 6 kW - Stirring speed: 46 rpm & 92 rpm (1st / 2nd gear) - Motor power: 0.6 kW / 0.8 kW (1st / 2nd gear) - Connection values: 400 V - 3Ph - 50Hz - 32A-CEE plug - Dimensions: 960 x 780 x 1635 mm (WxDxH) - Filling height: 1200 mm - Net weight: 150 kg

Year of construction: 2026, condition: new, functionality: fully functional, New machine with a 24-month warranty Stainless steel model Advantages: + Mobile unit with locking castors + Completely made of stainless steel + For the production and preparation of puff pastry, baking cream, chocolate, fondant, fruit jam, coatings, fillings, as well as for any product that requires even heating and mixing Ledeivduiopfx Aftoad + Thermal oil circulates in the double-walled tank, designed for safe and easy operation + Triple-walled construction for optimal thermal insulation + With side and bottom scrapers + Electronic thermostat for adjusting the cooking temperature + Manual / automatic operation possible + Digital temperature display with timer + The tank is easily tilted for emptying via a handwheel (optional: with a drain tap) + Two working speeds + Safety switch in case of overheating SPECIAL accessories, optionally available at an extra cost: - Drain tap for quick and easy emptying: + €880.00 net - Machine with frequency inverter, for stepless mixing speed: + €1,115.00 net - Double mixing tool, for particularly homogeneous mixing of products + €815.00 net - Higher temperature (instead of 150 °C, up to 180 °C possible) + €1,000.00 net Technical data: - Capacity: 80 liters - Max. temperature: 150 °C (optional up to 180 °C) - Thermal oil volume: 19.5 liters - Heating power: 10 kW - Motor power: 0.6 kW / 0.8 kW (1st / 2nd speed) - Connection values: 400 V - 3-phase - 50 Hz - 32A-CEE plug - Dimensions: 960 x 740 x 1635 mm (W x D x H) - Filling height: 1270 mm - Net weight: 158 kg

Year of construction: 2026, condition: new, functionality: fully functional, New machine with a 24-month warranty. Stainless steel model. Advantages: + Mobile unit, with locking castors + Completely made of stainless steel + For the production and preparation of pastry dough, baking cream, chocolate, fondant, fruit jam, glazes, fillings, as well as for any product requiring uniform heating and mixing + Thermal oil circulates in the double-walled tank, designed for safe and easy use Lajdpfxoivdume Aftsd + Triple-walled construction for optimal thermal insulation + With side and bottom scrapers + Electronic thermostat for setting the cooking temperature + Manual/automatic operation possible + Digital temperature display with timer + The tank can be easily tilted via a handwheel for emptying (optional: with a discharge tap) + Safety switch in case of overheating STANDARD accessories, already included in the price: - Discharge tap for quick and easy emptying - Machine with frequency inverter for stepless stirring speed OPTIONAL accessories, available at an extra cost: - Double mixing tool, for particularly homogeneous mixing + €950.00 net - Higher temperature (instead of 150 °C, up to 180 °C possible) + €1,900.00 net Technical data: - Capacity: 120 liters - Max. temperature: 150 °C (optional up to 180 °C) - Thermal oil volume: 29 liters - Heating power: 15 kW - Motor power: 1.8 kW (variable speed) - Connection values: 400 V - 3Ph - 50 Hz - 63 A-CEE plug - Dimensions: 1120 x 905 x 1820 mm (W x D x H) - Filling height: 1380 mm - Net weight: 232 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 recirculating air chamber furnaces, fast heating times, short process times, electric, warranty 12 months, immediately available - Temperature 200°C, can be increased to 250°C! Laodjy Tkfwspfx Aftjd - Charging trolley, 5 units available, modification on request - Homogeneous temperature distribution of +/- 10°C - Internal dimensions (W x D x H): 3750 x 1400 x 2300 mm - External dimensions (W x D x H): 4850 x 1705 x 3880 mm - Usable volume 11.6 m³ - S!MPAC control system with touch panel - Program execution with feeler as cascade control - Temperature limiter - Signal tower - Directly accessible, with grid rails - Exhaust air volume flow 140 m³/min - Electromagnetic door locking - Rated power 180 kW - Connection power 241 kW!! - Weight approx. 3500 kg - Documentation, CE declaration of conformity We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, oven, kilns, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, convection oven, chamber furnace, heating furnace, chamber convection oven, annealing oven, tempering oven, recirculating air chamber furnace, hardening oven, Vötsch oven, Weisstechnik, fusing oven, curing oven, post-curing of liquid crystal windows, CFRP support structure, oven for glass, glass tempering oven, glass fusing oven, glass hardening oven

Condition: used, Used Brogli model MH-5 stainless steel vacuum process vessel. - Manufacturer: Brogli - Model: MH-5 Vessel: - Total capacity of vessel: 6,8 litre - Working capacity of vessel: 5 litre - Vessel rated: -1/0,5 bar - Jacket rated: 1 bar Mixing system "Multi-homo": - (1) anchor agitator with scrappers - (1) ribbon agitator - (1) homogenizer system Includes: - control panel - heating unit - lowering/raising the vessel using a hand-operated wheel Specifications: Vacuum (Y/N): Y Capacity: 5 Material Of Construction: AISI 304 Lasdpezbuibofx Aftod Jacket (Y/N): Y

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, available for immediate delivery -Temperature 200°C, increase to 250°C possible upon request -Charging car, 5 units available, conversion possible upon request Lsdpfsy Avqwjx Aftsad -Homogeneous temperature distribution of +/- 10 °C -Internal dimensions WxDxH 3750 x 1400 x 2300 mm -External dimensions WxDxH 4850 x 1705 x 3880 mm -Usable volume 11.6 m³ -Control system S!MPAC with touch panel -Program execution with feeler as cascade control -Temperature limiter -Signal column -Directly accessible, with grid rails -Exhaust air volume flow 140 m³/min -Electromagnetic door locking -Rated power 180 KW -Connection 241 KW !!! -Weight approx. 3500 kg -Documentation, CE declaration of conformity We would be happy to offer transport and installation, as well as training for your employees. Inspection in our machine hall is possible at any time by arrangement. Furnace, Oven, Ovens, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Fusing furnace, Postcuring, Post-curing of liquid crystal windows, CFRP supporting structures, CFRP support structure, Curing oven, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven

Condition: used, Stephan MCH D 180 Microcutter This high-performance continuous microcutter from Stephan is a versatile emulsifying machine widely used in the food industry. It is ideally suited for the meat, pet food, baby food, convenience food, plant-based (vegan), vegetable, and fruit processing industries. The continuous cutter processes large quantities of product at high speed into a homogeneous mass while simultaneously ensuring effective mixing of ingredients. The cutting size can be adjusted using interchangeable cutting rings, allowing the production of both fine and coarse emulsions. This microcutter is equipped with a large 200-liter feed hopper positioned at a convenient working height, enabling direct product transfer from a bowl cutter. The emulsifier is mounted on wheels for easy mobility within the production area. The machine is constructed entirely from stainless steel. Specifications: - Production capacity: Up to 6,000 kg/h (depending on product type, particle size, and feed rate) - Hopper capacity: 200 L - Equipped with a double cutting system - Supplied with cutting rings: 0.7 mm and 0.5 mm - Hopper infeed height: 910 mm - Power supply: 400 V (3-phase + Neutral, 50 Hz) - Power rating: 75 kW Lsdpfozdqi Usx Aftjad - Weight: 977 kg - Year of manufacture: 2007 Machine Dimensions (W × D × H): 2220 × 1120 × 1060 mm

Condition: ready for operation (used), functionality: fully functional, The ANKO HLT-700XL forming machine is a multi-functional industrial machine designed to automate the production of various filled products such as ravioli, samosas, dumplings, gyozas, empanadas, ravioles, har gow, and other food specialties. Recognized worldwide in the food processing industry, it allows manufacturers to increase their production capacity while ensuring consistent product quality. Thanks to its automated dosing and forming system, the HLT-700XL ensures excellent consistency in weight, shape, and filling. Indeed, the quantities of dough and filling are adjustable to meet the specific needs of each recipe. Consequently, raw material waste is reduced while productivity increases. Furthermore, the quick mold changeover allows for the production of multiple product types with a single machine. This forming machine is particularly appreciated by manufacturers of frozen foods, central kitchens, and Asian food producers. At the same time, its high production capacity allows it to meet the requirements of modern industrial lines. Moreover, its compact size facilitates its integration into existing workshops without requiring significant modifications to the layout. Ljdpfx Aszdqa Toftsad Finally, the ANKO HLT-700XL forming machine is a strategic solution for automating production while ensuring homogeneous and repeatable quality. As a refurbished machine, it also significantly reduces investment costs compared to a new machine. Technical specifications: Serial number: 201136 Date of manufacture: 11/2019 Power supply: 380 V Frequency: 50 Hz Number of phases: 3 PH Power: 4 kW Production capacity: 2,000 to 10,000 pieces/hour depending on the product Filling hopper capacity: 35 L Machine weight: 450 kg Manufacturer's dimensions (L × W × H): 1150 × 570 × 1700 mm Unit product weight: 2 to 200 g depending on the configuration Products that can be produced: ravioli, dumplings, gyozas, samosas, empanadas, ravioles, har gow, and similar filled products

Year of construction: 2010, operating hours: 18,766 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 58566150370010, VÖTSCH VC7018 CLIMATE TEST CHAMBER – INDUSTRIAL QUALITY FOR PRECISE TEMPERATURE AND HUMIDITY TESTING For sale is a high-quality Vötsch VC7018 Climate Test Chamber in very good condition. The unit is ideally suited for demanding temperature and humidity testing applications in research, development, quality assurance, and industrial environments. Vötsch is one of the world's leading manufacturers of environmental simulation and testing equipment, renowned for precision, reliability, and long service life. The VC7018 has been designed for reproducible climate and temperature testing and provides excellent temperature and humidity uniformity throughout the test chamber. The spacious stainless-steel workspace offers ample room for a wide range of test specimens and applications. Its powerful air circulation system ensures homogeneous climate conditions and reliable test results. The intuitive touchscreen controller allows simple and user-friendly operation. TECHNICAL FEATURES • Manufacturer: Vötsch Industrietechnik • Model: VC7018 • Type: Climate Test Chamber • Temperature Range: -70 °C to +180 °C • Humidity Range: 10 % to 98 % RH • Stainless-Steel Interior • Dynamic Air Circulation System • Large Viewing Window • Touchscreen Controller • Heavy-Duty Industrial Design • Suitable for Continuous Operation Ljdpfxozdp Tlo Aftoad APPLICATIONS • Electronics Industry • Automotive Industry • Aerospace Industry • Material Testing • Research & Development • Quality Assurance • Aging and Reliability Testing KEY BENEFITS ✓ Precise temperature and humidity control ✓ Excellent climate uniformity throughout the chamber ✓ High-quality stainless-steel workspace ✓ User-friendly operation ✓ Robust and durable construction ✓ Ideal for laboratory and production environments ✓ Proven Vötsch technology and reliability CONDITION The unit is in very good used condition. The interior is clean and the chamber is in overall excellent condition. Inspection and functional testing are welcome by appointment.