Used Magnum for sale (67)

Condition: good (used), functionality: fully functional,

Condition: used, Year of construction: 2016, functionality: fully functional, SUPERFICI painting robot with 2 drying tunels and UV dryer and cooler 1.CATTINAIR - belt converyor (mat. loading/feeding) 2. GIARDINA -sanding machine Kdsdpez Izhyofx Ahbju 3. SUFERFICI - MAGNUM 3.2.2 - painting robot 4. NEW FINISHING - drying tunnel 1 5. NEW FINISHING - drying tunnel 2 6. NEW FINISHING - UV dryer 7. CML Finishing - cooling tunnel 8. CATTINAIR - belt conveyor (unloading)

Condition: like new (used), Year of construction: 2013, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2025, warranty duration: 12 months, input frequency: 50 Hz, Useful printing format: 150x300. Frame lifting parallel to the printing plane. Kjdpfxjzqf D To Ahbjdu Printing plane adjustable on all three axes. Lift-O-Mat (device for progressive frame release), continuously adjustable from the operator side. Printing stroke adjustment via magnetic microswitches. Printing speed and ink return adjustable continuously and independently. Extremely uniform squeegee advance in the transverse direction, even at high speeds. Micrometric adjustment of the squeegee and blade pressure. Squeegee tilt adjustment. Two operating cycles: single and pulsed, for setup. Printing plane with a honeycomb structure and anodized aluminum coating. Printing plane equipped with a vacuum device with pre-vacuum and blow functions. Quick removal of the squeegee and blade. Pneumatic frame locking system.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 7,990 kg, CHIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a comprehensive factory overhaul by CHIRON For sale is a CHIRON FZ 18 S MAGNUM High Speed vertical CNC machining center manufactured in 1998. The machine is equipped with Siemens SINUMERIK control, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also has an oil mist extraction system with a filter. The most important advantage of the offered machine is the comprehensive inspection and overhaul carried out in 2020 by CHIRON. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available for the work performed, confirming the scope of the overhaul. Technical data: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control: Siemens SINUMERIK Kedpfx Aszdkhqshbedu Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the comprehensive overhaul carried out by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC machining center Hedelius C100 -3500 Magnum Control system: Heidenhain iTNC 530 Year of manufacture: 2009 Internal machine number: 79 Travel ranges: X-axis 3,500 mm Y-axis 1,000 mm Kedpfx Asz Ixndshbedu Z-axis 770 mm Clamping surface 4,150 x 1,000 mm Swinging operation: 2 x 1,450 x 1,000 mm Table load: approx. 4,500 kg Tool holder: HSK 63 Tool magazine: 70 positions Spindle speed: 20 – 12,000 rpm Accessories - Operating panel - Chip conveyor - Paper band filter system - 20 bar coolant system

Condition: excellent (used), Year of construction: 2005, Control system: Siemens Sinumerik 840 D / PCU 50 Travel range X 2300 mm Travel range Y 800 mm Travel range Z 600 mm Working areas in tandem operation 2 × 925 × 800 mm Main spindle 30 – 8000 rpm Spindle power 27.0 kW Spindle torque 244 Nm Machine bed: torsionally rigid, stress-relieved welded construction. Guidance system: roller guides Measuring system: direct path measuring system / glass scales on X, Y, and Z axes Resolution measuring system 3 μm / 1000 mm Feed drives: digital three-phase servo motors Feed rate up to 30 m/min Main spindle: water-cooled CELOX motor spindle Tool holder HSK A63 Spindle power 20.0 kW / 18.3 Nm Spindle speed 12,000 rpm Spindle cooling: cooling unit with closed circuit. Spindle orientation freely programmable Tool magazine: rotary tool magazine Tool positions 56 Tool holder magazine HSK A63 Max. tool length 330 mm Max. tool weight 10 kg Max. tool diameter 80 mm Magnum version C80/2300: 56-position Magnum tool magazine Spindle speed 12,000 rpm / 29.0 kW Operating panel BHG / 840D, external Signal light 1-fold Hollow shank taper HSK A63 / 12,000 rpm Compressed air nozzle on the spindle head, controlled by M-function Full enclosure 80 × 2300 Exhaust filter MultiAir exhaust filter Extraction capacity 1200 m³/h Filter stage 1 Metal filter, class G Main filter AeroPlus, class F9 Flushing guns 1 pair, 3 bar / 20 l/min Working area partition C80, manually swiveling in/out Load direction cabinets C80, for tool measurement/inspection Max. tool length load direction cabinet 230 mm Max. NC rotary table RT 500 Max. pickup magazine T3/W2 NC rotary table RT 250 The machine was also supplied with a vertical NC rotary table RT 250, including hydraulic spindle clamping and faceplate. Technical data RT 250: Part accuracy 15″ ± Repeat accuracy 4″ ± Center height 160 mm Runout 0.015 mm Flatness 0.015 mm Bore in rotary table 60 mm Speed max. 22 rpm Faceplate Ø 250 mm Kedpfx Ahsz R R Dnjbjdu Bore in faceplate 35 H7 T-slots DIN 605 12 mm Number of T-slots 4 pcs Drive torque 300 Nm Holding torque 1000 Nm Tilting moment 1200 Nm Transport load 120 kg with tailstock 250 kg Weight approx. 60 kg 2-point transformation optional Further components: - 2 x compressed air guns with quick coupling, spiral connection hose, and holder. - 1 x flushing gun, flushing pressure: 3 bar / 20l/min. - 1 x anchor screws x 2300 - 1 x laser light barrier - 1 x working area partition - 1 x 3D wireless probe system Renishaw RMP 60: System 3D wireless probe system Switching 3D probe stylus yes Transmitter/receiver unit yes Battery 9 V Probing accuracy ± 2 μm Probing speed 3 m/min Probe stylus length 50 mm Ball diameter 6 mm (ruby) Repeat accuracy < ± 2 μm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CNC machining center Hedelius Forte 7-2600 Magnum Control system: Heidenhain TNC 640 Year of manufacture: 2020 Availability: in transit Internal machine no. 73 Travel distances: X-axis 2,600 mm Y-axis 750 mm Kdjdpozzl Ugsfx Ahbsu Z-axis 800 mm Swinging operation: 2 x 1,000 mm Total clamping area: 2 x 1,490 x 750 mm Table load: approx. 2,500 kg Tool holder: HSK 63 Tool magazine: 50 positions Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Equipment: - Inclined bed coolant system 900 l - Chip conveyor - 2 x flushing guns - Electronic handwheel - Partition wall prepared - High-pressure pump 60 bar - 0-point clamping plates - Vises and tools as required - Prepared for work area partition

Condition: good (used), Year of construction: 2009, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC 530, workpiece weight (max.): 4,500 kg, total height: 3,500 mm, total length: 8,500 mm, total width: 3,500 mm, table width: 1,000 mm, table length: 4,150 mm, table load: 4,500 kg, overall weight: 25,000 kg, coolant supply: 20 bar, spindle motor power: 24,000 W, number of slots in tool magazine: 40, Equipment: chip conveyor, 3-axis CNC machine (VMC) Hedelius - C100 Magnum MACH-ID 9819 Make: Hedelius Type: C100 Magnum Control: HeidenHain iTNC 530 YOP: 2009 incl. Coolant system with 20 bar IKZ incl. Paper filtration system incl. Heidenhain HR 410 Remote Handwheel   X - Travel: 3500mm Y - Travel: 1000mm Z - Travel: 770mm Table Length: 4150mm Table Width: 1000mm Table load: 4500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK-63ISO/Bt/Mk Power on spindle: 24kW Speeds / ranges: 8000Rpm ATC / revolver: 40 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 8500mm Kjdpfx Asz Hkg Nohbjdu Width: 3500mm Height: 3500mm Weight: 25000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details

Condition: excellent (used), Year of construction: 1998, HIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a major factory overhaul by CHIRON For sale: a vertical CNC machining center, CHIRON FZ 18 S MAGNUM High Speed, manufactured in 1998. The machine is equipped with a Siemens SINUMERIK control system, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also features an oil mist extraction system with a filter, plus air conditioning for the control system. The most important advantage of the offered machine is the major inspection and overhaul carried out by CHIRON in 2020. As part of the work, key machine components were replaced, including: spindle, Kdjdpfxjzdklpo Ahbsu control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available, confirming the scope of the overhaul. Technical specifications: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control system: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the major overhaul performed by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: used, The REMS Magnum pipe threader is suitable for pipes from 1/4" to 2". The following threading dies are included: - 3x: R1/2 - 3/4 - 5x: R1 - 2 The unit has been function-tested and comes with an electrical inspection carried out by a professional electrical company. Kdsdpfjz Nlfgex Ahbou

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 3,220 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 55, total height: 3,600 mm, total length: 7,500 mm, total width: 4,200 mm, overall weight: 15,500 kg, table length: 3,900 mm, table width: 750 mm, controller model: Heidenhain, distance table center to spindle nose: 720 mm, spindle motor power: 35 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 30 rpm, table load: 3,500 kg, tool diameter: 80 mm, tool length: 330 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with traveling column "HEDELIUS mod. CB80 MAGNUM" with Heidenhain TNC-530 Kdedpev Sdc Ujfx Ahbou

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC machining center Hedelius BC 100 P-3500 Magnum Control system: Siemens Sinumerik 840D Kjdpozw Dcnofx Ahbedu Year of manufacture: 2006 Internal machine number: 4 Location: Netherlands Travel ranges: X-axis: 3,500 mm Y-axis: 1,000 mm Z-axis: 770 mm Clamping area: 4,150 x 1,000 mm T-slots: 5 pieces Distance between T-slots: 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Tool holder: DIN 69871 SK 50 Tool magazine: 50 stations Spindle speed: 20 - 4,500 rpm Accessories: - Automatic door - Operating panel - Machine hood - Chip conveyor

Condition: excellent (used), Year of construction: 2015, I sell the spraying automat Superfici Magnum. Configuration: 2 arms - 2 heads x 2 guns (4 guns total) Manufacturer: SCM Superfici Model: Magnum. Working width: 1350mm Year 2015. Kedewg Tunjpfx Ahbedu Available immediately. Fully working.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, CNC Machining Centre Hedelius C60P-2000 Magnum Control: Heidenhain iTNC 530 Year of manufacture: 2009 Internal machine no.: 8 Travel ranges: X-axis: 2,000 mm Y-axis: 620 mm Z-axis: 520 mm Clamping area: 2,500 x 600 mm Spindle taper: SK 40 Tool magazine: 56 stations Kjdpfoylkydsx Ahbjdu Spindle speed: 8,000 rpm Accessories: Chip conveyor AME KB 448 Paper band filter AME PS 120 LTA extraction unit Machine enclosure

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Kdjdpfxszc D Agj Ahbou Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC-Steuerung Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2012, mileage: 130,000 km, power: 169 kW (229.78 HP), first registration: 12/2012, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 10/2028, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, Internal Vehicle No.: G400124 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Scania G230 4x2 Road Sweeper Scarab Magnum | Weed Brush | Euro 5 For sale: a used Scania G230 4x2 road sweeper with a Scarab Magnum body, manufactured in 2012. The vehicle is equipped with a 230 hp diesel engine, air conditioning, and rear-wheel drive. During normal road operation, the vehicle is driven via a manual gearbox. For sweeping operations, a hydrostatic drive system is available. The equipment includes, among other things, a right-hand sweeping unit, a weed brush at the front of the vehicle, a rear suction system, and a high-pressure pump with a lance. Technical data of the vehicle: * Manufacturer/Model: Scania G230 * Vehicle type: Road Sweeper * First registration: 12/14/2012 * Year of manufacture: 2012 * Total kilometers driven: approx. 130,000 km Kdedpfjy N H Dhox Ahbeu * Kilometers swept: 65,868 km * Engine operating hours: 14,239 hrs * Power: 169 kW (230 hp) * Engine displacement: 9,290 cm³ * Fuel: Diesel * Transmission for road operation: Manual gearbox * Drive system for sweeping operation: Hydrostatic * Emission standard: Euro 5 * Environmental badge: 4 (Green) * Number of axles: 2 * Wheel formula: 4x2 * Driven axles: 1 * Drive: Rear-wheel drive * Permissible gross weight: 18,000 kg * Unladen weight: 9,490 kg * Payload: 8,500 kg * Overall length: 6,700 mm * Width: 2,550 mm * Height: 3,250 mm * Air conditioning * Color: Orange * TÜV (technical inspection): New * Vehicle number: G400124 * Condition: Used * German vehicle Technical data and equipment of the superstructure: * Manufacturer/Model: Scarab Magnum * Operating hours of the road sweeper superstructure: 11,587 hrs * Sweeping water tank: approx. 1,200 liters * Hydrostatic drive system for sweeping operation * Sweeping unit on the right-hand side * Weed brush at the front * Suction system at the rear * High-pressure pump with lance * High-pressure nozzle for cleaning the turbine * Rear camera * Side camera * Running boards at the rear * Front and rear warning lights * Two rotating beacons on the vehicle roof * One rotating beacon at the rear left of the container Inspection and functional testing possible after prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] Kjdsyq Nyyopfx Ahbsdu INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: used, Ceramic tile press SITI MAGNUM 800. Pressing force: 800 tons. Kdjdpfx Ahsxu N H Hjbju

Condition: used, Colchester Magnum 1250 Gap Bed Centre Lathe. Distance Between Centres 4000mm (157"). Swing Over Bed 635mm (25"). Swing In Gap 900mm (36"). Spindle Bore 118mm. Spindle Speeds 6.3 - 1250rpm. Leadscrew 2 TPI. Rapid Power to Saddle & Cross Slide. Kdodpjzy Im Nefx Ahbeu Quick Change Tool Post & Holders. 3 & 4 Jaw Chucks. 3 Point Roller Bearing Steady. Newall DP 700 Digital Readout & Tooling. Weight Approx: 6000KG

Condition: used, Year of construction: 2008, used, good condition with automatic length measuring device Manufacturer: Ayen Type: Magnum 8/10 V Year of manufacture: 2008 Machine No.: 0826788 Glue tank: 1.4 ltr. Dowel diameter: 8 x 10 mm Dowel length: 30-45 mm with glue indicator CE type-tested Glue gun mobile Kodpey A Tbgefx Ahbsdu Space requirement approx. 480 x 480 x 900 mm Weight approx. 71 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition without warranty or guarantee

Condition: used, Year of construction: 2011, mileage: 66,200 km, power: 184 kW (250.17 HP), first registration: 03/2011, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), * MAN TGM 18.250 Sweeper Truck * First registered: 03-2011 * Superstructure: Scarab Magnum Hydrostatic * 3 sweeping brushes * Manual transmission * Air conditioning * More pictures and videos available via WhatsApp * Specifications subject to change and prior sale. Kdedpfx Ahozy T D Hebeu

Condition: used, Year of construction: 2008, - Producer Elmag Superfici - Type Magnum 3.2.2 - Year of construction 2008 (2010) Kjdpfxozf N Dto Ahbsdu - Working width 1.350 mm - Working height 900 mm + - 20 mm - Operating side, right - Actual condition, machine is not overhauled - Duo gun drive system - Spraying gun carrier independently controllable - Dry filter system - Exhaust air 13.500 m³/h - Transport belttransport System - Feed speed adjustable bis 18 m/min - 2 belt cleaning units - Belt cleaning system with roller - Belt cleaning system, behind the machine - Lacquer reclaiming system with v-belt - Gun control system - PLC control with touch screen - Number of installed lacquer circles 2 Stk. - Supply air box - Length ~ 6.680 mm - Width 4.455 mm - Total connection power ~ 26.3 KW - Voltage / HZ 400 / 50 - Location, not on stock - Voltage fluctuation max. +/- 5 %

Condition: ready for operation (used), Year of construction: 2014, operating hours: 24,209 h, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: FANUC, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of axes: 4, This 4-axis CHIRON FZ 15 W Magnum HS vertical machining center was manufactured in 2014. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this CHIRON FZ 15 W Magnum HS vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • Number of tools per spindle: 48 • Tool holder: hsk-a 63 • Main spindle max. Torque: 95 nm Kjdsx D Nl Ujpfx Ahbjdu Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2006, CNC Machining Center Hedelius T8 – 3200 Magnum Control: Heidenhain iTNC 530 Year of manufacture: 2006 Internal machine number: 1 Travel ranges: X-axis F/B: 3,220 / 2,600 mm Y-axis: 800 mm + 65 mm Z-axis F/B: 850 / 1,000 mm Pendulum operation F/B: 2 x 1,300 mm Clamping surface: 3,800 x 800 mm Taper: SK 40 Tool magazine: 98 stations Spindle speed: 50 - 12,000 rpm Enlarged machine table Equipment: - Internal coolant supply (IKZ) 20 bar - Band filter coolant system 780 l - 3D wireless probing system Renishaw RMP 60 - Chip conveyor Kdjdpfxeyk Avze Ahbju - Rinse gun - Electrostatic exhaust air filter - Electronic handwheel HR 410/3+ - Partition - 2x LTA extraction units - Prepared for 5th axis

Condition: used, Tumbler Inject Star Magnum 2600 COOL with Lifter Ksdpfxozu Dcve Ahbedu