Used Hacker for sale (40)

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, filter area: 18 m², pressure: 10 bar, cake thickness: 25 mm, overall weight: 2,000 kg, number of chambers: 28, Used, refurbished Häcker chamber filter press, Type KFP 630/28. Plate format 630 x 630 mm, volume 220 liters, filtration area 18 m². 28 filter plates, cake thickness 25 mm, maximum pressure 10 bar, with black PP filter cloths. Equipped with mounted Häcker piston pump (flow rate 2.5 m³/h), with compressed air tank, mini-compressor. With electrical cabinet. Filter press installed in a 20'' dry container with an opening underneath (drawing available). Bodpfjz Dgbwsx Agrjww Approximate dimensions: 3200 x 1000 x 1500 mm, weight 2000 kg. With technical documentation.

Condition: good (used), Used shredder in good condition for sale. Serviced in September 2026. * Available at a special price of €9,950 net plus VAT, ex works Neckartailfingen. For shredding hard and soft wood of all kinds. Engine: 15 kW Weight: approx. 1,300 kg Bjdpfxszu Rz Sj Agreww Used machine, sold as is. Functional guarantee upon delivery.

Year of construction: 1994, operating hours: 3,689 h, condition: used, Schliesing MX 660 Wood chipper on a two-axle chassis > Hatz 4L40C diesel engine > Braked two-axle chassis > 2 infeed rollers > Only 3,689 operating hours > Year of manufacture: 1994 Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will gladly assist you. Further information can be found on our website. Errors and prior sale excepted! Road approval = Further information = Year of manufacture: 1994 Bwsdpfx Agsz Hidyersw Operating hours: 3,689 Please contact Tobias Ebert for further information.

Condition: refurbished (used), We offer various piston pumps from Häcker, PP design, various sizes from 1 - 10 m3/h, up to 10 bar, cpl. overhauled Bwsdpfx Agsikl Tporsw

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Bedpferunu Ijx Agrjww

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 500/2089, Weima shredder, type: WL 6 Cutting shaft with round knives Motor power: 22 kW Including control cabinet Discharge screw up to the suction nozzle Bodpfs Ahykyex Agreww Machine is available immediately Handover in its current condition, as inspected, without warranty or guarantee.

Condition: good (used), Year of construction: 2012, Slow-speed machine with a push-floor system. Rotor width: 830 mm. Large rotor with 38 blades. Blade size: 40 x 40 mm. 22 kW motor. Screen aperture: 25 mm. Bwodpfx Aoy T Ef Eogrew

Condition: like new (used), functionality: fully functional, fuel type: electric, Material width for the material inlet: 500 mm METRO 55 HACKER – a professional machine for shredding wood waste. A powerful sawmill shredder, designed for shredding wood waste, branches, boards, and production residues in sawmills and wood processing plants. Its robust construction and powerful cutting system ensure reliable and efficient operation even under heavy loads. The machine is ideally suited for the production of firewood chips, biomass, and material for further processing. Material width for the material inlet: 500 mm Number of blades: 2/3/4 Main engine power: 55 kW Power of the feed motor: 2x3 kW Feed speed: 25 m/min Automatic motor load control. Product features: - High work efficiency, - Robust steel construction, - Safe material feed system, - Possibility of continuous operation, - Easy operation and maintenance, - Use in sawmills and industrial plants. Bwjdpez H Tvasfx Agrsw Application: Shredding wood and sawmill waste, Wood chip production, Biomass processing, Recycling of wood waste.

Condition: excellent (used), 2 knives Knife width: 35 cm Drum diameter: 125 cm Drum width: 25/7 cm Bodpfxjx Tf E Eo Agrsww Maximum material height: 13 cm Maximum material width: 33 cm Outlet: 25 cm Motor: 45 kW Transport width: 200 cm, height: 150 cm, length: 280 cm

Condition: used, axle configuration: 2 axles, Schliesing MX 660 Wood chipper on a tandem-axle chassis > Hatz 4L40C diesel engine > Braked tandem-axle chassis > 2 infeed rollers > Only 3,689 operating hours Bwjdpj Aftn Hefx Agrow > Year of manufacture: 1994 Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. You can find more information on our website. Errors and prior sale excepted! = Further information = Year of manufacture: 1994 Payload: 2,900 kg Gross vehicle weight: 2,900 kg Please contact Tobias Ebert for further information.

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 400 x 400 mm, 20 plates, open spout, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 60 liters, filter surface 5m², dimensions 2500 x 700 x 1500 mm, weight 1000 kg, engine hydraulics, drip tray, filtrate, with or without filter cloths, piston pump incl. Piping with built Bedpfx Ajfbbpqsgreww

Condition: used, Second-hand DHB wood chippers, Type 600, for the professional chipping of wood and other materials. The machine is fitted with a 20 mm screen, an 18.5 kW motor and a 600 mm long rotor. Technical data: - Screen: 20 mm - Motor: 18.5 kW Bwjdpfxjzwl S Do Agrjw - Rotor length: 600 mm

Condition: used, first registration: 09/2012, TS Industrie Wood Chipper 190M Price incl. VAT. * 1251 m³/h Bwjdjzalrwopfx Agrjw * Up to 19 cm trunk diameter * Hopper and discharge chute can be rotated * 50 hp Kubota diesel engine * Service and TÜV inspection included with purchase Errors and prior sale excepted.

Condition: reconditioned (used), Year of construction: 1985, Hacker, factory-refurbished in 2023 for €7,500. Motor: 22 kW Bsdpfx Ae Agw U Nogrsww Equipped with 49 impact blades Throughput: 300 - 1500 kg/hour Screen hole size: 25 mm Operating hours: 7738 Infeed hopper: 90 x 90 cm With an additional hopper on top, measuring 1 x 1 m, total height: 265 cm.

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Technical specifications: Hopper opening with log spacer: 600 x 1,050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 256 mm Drive power: 18.5 kW Rotor speed: 90 rpm Number of knives: 28 Type and size of knives: concave / 40 x 40 mm, cutting reversible tips Screen perforation: 15/20 mm Bwjdpfozpzzfex Agrjw Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5 % / 50 Hz Includes: Control cabinet incl. 5 m cable Electrical control Star-delta starter Rubber vibration dampers V-rotor (patented) with knife pockets milled into the profile Gearbox limit switch 2nd knife row Log spacer (free-cutting hopper) Hold-down device on the slide Availability: short notice Location: Solingen

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,400 kg, total length: 2,135 mm, total width: 1,480 mm, total height: 1,775 mm, working width: 830 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 20, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 830 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker shredders, wood chippers, and grinders – MHR830 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and woodworking operations that are looking for an economical and high-performance solution. The machine is manufactured and distributed directly from our factory in Germany. Advantages - Continuous, consistent shredding process - High performance with low energy consumption Bwedpfe Ah If Rex Agrow - Robust construction - Larger feed opening - Excellent value for money - Ready for connection - Siemens PLC controlled - MHR830 ecoline Rößler shredders – "Made in Germany"

Condition: excellent (used), Vecoplan chipper for saw cuts Hacker 55/26/2 - German production - reverse - for the production of technological chips - a powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - 550 mm slot width - inlet height 260 mm - two knives - engine power 110 kW - conveyor belt length 5000 mm - 50 x 50 mm sieve - three upper pulling toothed shafts Bedpjihpg Ejfx Agrsww - four lower pulling toothed shafts - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of the feed rollers - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ V-rotor Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 knives 40 x 40 mm Screen perforation: 15/20 mm Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection voltage: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Includes: Automatic star-delta starter Automatic shut-off in idle mode Vibration-damping machine feet CE compliant Availability: short-term Bwjdpfoxavtdex Agrew Location: Flörsheim

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Shredder, wood chipper, and wood shredder: Hacker, MHR630 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and wood processing companies looking for an economical and powerful solution. The machines are manufactured and directly distributed from our factory in Germany. Advantages: - Continuous, even shredding process - High performance with low energy consumption - Robust construction - Larger feed opening - Excellent value for money - Plug-and-play (5-pin CEE plug, 400V, 32A three-phase current) - Controlled by Siemens PLC - Includes optional scraper bar - MHR630 ecoline Rößler shredder: "Made in Germany" Bwjdpfxez R T Sfj Agrsw

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,250 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 30, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Waste material shredder, Hacker wood shredder, chipper, shredder MHR630 proline The MHR proline series consists of robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and industrial enterprises seeking an economical yet powerful solution. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - 2 rows of knives for increased throughput - Robust construction - Larger feed opening - Excellent value for money Bjdpfx Aoz Tddvegrsww - Ready for connection - Controlled by Siemens PLC - MHR630 proline Rößler waste material shredder – “Made in Germany”

Condition: excellent (used), Year of construction: 2020, Powerful hacker or shredder with 45 kW motor, also suitable for plastic. Rotor width: 1000 mm, rotor diameter: 360 mm, approximately 50–60 blades on the rotor. Inclined conveyor belt with magnetic roller available separately. Bsdpfsw Tdudjx Agroww

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder, Type WL 6 Power: 18.5 kW Bedscbtpkepfx Agrsww Our WL 6 machine concept: The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF, plywood, veneer remnants, etc.) into fuel chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed via a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 RPM Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint finish: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) - Star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Presser bar - Very robust Weima WAP gearbox Recommended accessories - Log spacer (free-cutting hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Year of construction: 2008, operating hours: 133 h, condition: used, JBM Wood Chipper, Model 630 MDX, mounted on a single-axle chassis / car trailer > Kubota diesel engine, 44 kW (60 hp) > Spring-suspended, braked single-axle chassis > Wide feed opening: 310 x 220 mm > Log diameter up to 220 mm > Adjustable wood chip length: 0 – 25 mm > Weight: approx. 1,690 kg > Only 133 operating hours! > Year of manufacture: 2008 Bodpfezyf Htox Agreww Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will gladly assist you. Further information can be found on our website. Errors and prior sale excepted! = Further information = Year of manufacture: 2008 Operating hours: 133 Please contact Tobias Ebert for further information.

Condition: good (used), functionality: fully functional, Möller Hacker / impact shredder / secondary shredder. Bwjdpfjxl Uiujx Agrow Infeed width 835 mm. Infeed opening 310 mm. Rotor diameter 500 mm. 72 hammers. Screen perforation 16 mm. Drive motor 30 kW. Hopper with angled feed or top feed. Insensitive to foreign objects. Ideal for waste in sawmill basements.

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Shredder, wood chipper, and material shredder – Hacker MHR630 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and an excellent price-performance ratio, making them ideal for craft businesses, recycling companies, and wood processing companies seeking an economical and high-performance solution. The use of Ecorings ensures a consistent shredding process for a wide variety of materials. An integrated, self-adjusting scraper bar reduces the occurrence of blockages in the feed chute when processing thin materials. The machines are manufactured in our factory in Germany and sold directly. Bodpfx Ao Afbydjgrsww Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - Robust construction - Larger feed opening - Excellent price-performance ratio - Plug-and-play (5-pin CEE plug, 400V, 32A three-phase) - Siemens PLC controlled - Includes optional self-adjusting scraper bar - Includes Ecorings - MHR630 ecoline Rößler material shredder – “Made in Germany”