Used Agglomerator for sale (19)

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Iodpfozy Hwmox Acmebb Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. The system is available at short notice!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Isdpfxowg Sgce Acmobb Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2004, condition: good (used), Disintegrator calibrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, particle unification for bulk solids, and granulation of moist products. Throughput from 50 to 5,000 kg/h. Ibsdjy Hfxfspfx Acmjb

Year of construction: 2022, condition: new, Electrostatic filters are considered the most sophisticated technology, currently available, for the collection of solid and liquid particles existing in an exaust air flow. The electrostatic uptake allows the separation of any particle from the air, regardless of its size. In fact, the agglomeration of very fine particles is possible with efficiencies up to 99% on atmospheric dust according to the EN 779 method.The use of electrostatic filters therefore allows to obtain air completely free of dust , smoke, spores, bacteria, pollen ecc . The main advantages deriving from the use of electrostatic filters are: • High filtration efficiency Iedpfx Acjh Aku Tjmjbb • Low pressure drops • Low operating cost • Limited maintenance interventions • High operating reliability

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo Ibjdpfxszy Hwgo Acmeb • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor. Ijdjzy Hrqspfx Acmobb

Condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Condition: unused, without controls -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW Iodpfx Aozbk Tiscmobb -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Quantity: 3 pieces available -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Condition: The machine was a demonstration unit, equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces Ibjdezbk Iyjpfx Acmjb -Number of counter blades: 6 pieces -Ejection: Height adjustable Quantity: 1 piece available -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, DIOSNA V50 – UNIVERSAL MIXER GRANULATOR / PHARMACEUTICAL GRANULATOR For sale: DIOSNA V50 Universal Mixer Granulator in exceptionally good used condition. The machine is manufactured with high-quality stainless-steel components and is equipped with a bottom-mounted three-blade mixing tool and a high-speed side chopper. The product-contact area, and especially the interior of the processing vessel, is in outstanding condition. The vessel, mixing tools, and stainless-steel surfaces are exceptionally clean and show very little sign of wear. TECHNICAL DATA Manufacturer: DIOSNA Dierks & Söhne GmbH, Germany Model: V50 Machine No.: 383-001 Year of manufacture: 2007 Usable bowl capacity: 46 liters Electrical supply: 400 V / 50 Hz Rated power: 6.5 kW Rated current: 15 A CE marked Ex / ATEX marking according to machine nameplate MIXING / GRANULATION SYSTEM The DIOSNA V50 combines intensive mixing and granulation in one compact processing machine. The processing vessel is equipped with: - Three-blade bottom mixing / granulating tool - High-speed side chopper - Stainless-steel processing vessel - Large side discharge system - Hinged stainless-steel vessel lid - Inspection window in vessel lid The combination of the bottom mixing tool and side chopper provides intensive product circulation and is suitable for mixing, granulating, agglomerating, and breaking down oversized product particles. CONTROL & EQUIPMENT - Siemens SIMATIC Touch Panel - Integrated stainless-steel control cabinet - Emergency stop - Key-operated control switch - Additional process control/display unit - Clean-air connections/control - Nitrogen connections/control - Mobile design on castors - Stainless-steel construction - Additional filter elements / accessories as shown in the photographs APPLICATIONS Suitable for applications including: - Mixing and homogenization of powders - Wet granulation - Agglomeration - Preparation of pharmaceutical granules - Breaking down oversized agglomerates - Pharmaceutical and chemical processing - Pilot and small production batches CONDITION Exceptionally good used condition. The interior of the processing vessel is remarkably clean and appears to have seen very little use. The mixing tool, chopper, and product-contact surfaces are also in excellent condition. The photographs show the actual machine offered for sale. INSPECTION Inspection and demonstration by appointment at our premises in: 4226 Breitenbach Switzerland Worldwide delivery can be arranged. Further technical information and additional photographs are available on request. CYCRON GmbH Switzerland Ibodpezxq U Hjfx Acmsb Subject to prior sale and errors.

Year of construction: 2008, condition: used, functionality: fully functional, FREWITT MF-LAB – PHARMACEUTICAL LABORATORY MILL / GRANULATOR For sale: FREWITT MF-LAB laboratory mill / oscillating sieve mill, used in pharmaceutical applications, in excellent used condition. The machine is supplied with an extensive package of 13 original sieve inserts in different sizes, as well as comprehensive original documentation and qualification documentation. TECHNICAL DATA Manufacturer: FREWITT SA, Switzerland Model: MF-LAB Year: 2008 Serial No.: 6180310817 Electrical supply: 400 V / 50 Hz Current: 16 A Design: ATEX Ibedpfx Acjzxdgiemjb APPLICATION The MF-LAB is designed for laboratory and pharmaceutical applications and can be used for gentle size reduction, calibration, and sieving of dry or moist products. Particularly suitable for: - Pharmaceutical R&D - Laboratory and pilot applications - Granule calibration - De-agglomeration - Sizing and sieving - Heat-sensitive products EXTENSIVE SIEVE PACKAGE A major advantage of this machine is the large number of included sieve inserts. Included are 13 marked sieve inserts in 9 different designs/sizes. All sieves shown in the photographs are included in the scope of supply. DOCUMENTATION Comprehensive original documentation and qualification documentation are available with the machine. CONDITION Excellent, very clean used condition from pharmaceutical use. Inspection and demonstration can be arranged by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged upon request. CYCRON GmbH Switzerland Invoice will be issued by CYCRON GmbH. Subject to prior sale and errors.

Condition: good (used), Year of construction: 2018, Recycling technology, agglomerator, high-performance mechanical dryer, dry cleaner, plastic recycling machine, drying system -Handover: in its current condition as inspected -Condition/Scope of delivery: untested, as shown in the pictures -Manufacturer: WIPA, Dry Cleaner Mechanical High-Performance Dryer Ijdpeztndujfx Acmebb -Type: MD 1250-3000/90/0.75/3R -Drive motor: 90 kW -Drum length: 1800 mm -Sieve: Perforation Ø 5 mm -Dimensions: Dryer 4475/2140/H2630 mm / Control cabinet 1200/660/H2195 mm -Weight: 8400 kg / 340 kg

Condition: used, Scott HST Mixer Model 2496 Continuous High Intensity Mixer with liquid injection. Extremely versatile blender employed for a wide range of duties, including: • Mixing of dry powders • Liquid addition to dry powders • Agglomeration (with additional of liquid binder) • Coating Adjustable paddles to control retention time. Large access doors for ease of cleaning. Installed Power – 45 kW. Ibsdpfx Aezvgmmjcmjb Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Year of construction: 2010, condition: repair required (used), Mastersizer hydro 2000s. Requires laser replacement, which we can perform. Price including replacement: €7,500. Technical specifications: Malvern Mastersizer 2000 particle analyzer for liquids with a Hydro 2000S module. The Hydro 2000S module can circulate from 50 ml to 150 ml of liquid. Variable pump/mixer speeds allow for the suspension and circulation of particles of different sizes and densities, while a variable power ultrasonic system enables the dispersion of particle agglomerates. The Mastersizer 2000 measures the particle sizes in the sample and displays their proportions on a computer in a graph. The measurement takes place as the particles pass between the detector array and the laser. Technical specifications for Hydro 2000S: Voltage: 220-240 V, 50-60 Hz Power: 240VA Maximum particle size: 600 µm Isdpfx Ajx Niiyecmebb Technical specifications for Mastersizer 2000: Voltage: 240 V, 50-60 Hz Power: 60VA Particle size: 0.02 µm to 2000 µm Lasers: Bxzqjbv8Dy Red: gas laser, wavelength 633 nm Blue: LED, wavelength: 466 nm This product consists of two separate units: Mastersizer 2000, Hydro 2000S, software included. Mastersizer External dimensions (W) x (D) x (H): 133 x 30 x 40 cm Hydro 2000S External dimensions (W) x (D) x (H): 34 x 35 x 34 cm

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Isdpfx Acoiyyf Ijmjbb Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, RECYCLING PELLETIZING EXTRUSION LINE – BEIER 2014 / EKOCHEM – 2023 – with autostart heating - Belt conveyor with amperes load control - Agglomerator – 75 kw with cooling blower and auto water spray system - Main engine extruder – 110 kw - Double degassing MELT LASER FILTER SYSTEM – HOP 400 – Ekochem – 2023 - with autostart heating - with cooling pump - laser filter spare parts: 1 set 200 microns, 1 set 250 microns, 2 sets 300 microns, 2 blades PELLETIZER – RW-440 – Ekochem – 2023 - with new Ekochem die head water pump - with PE and PP die head - with air compressor and custom die head blades – 48 h/set change Ijdpouac Ugjfx Acmobb - Centrifuges - Vibrator - Heated Silo + weight system - Capacity: PP( 400 – 500 kg/h) / PE( 500 – 600 kg/h )

Year of construction: 2022, condition: new, Rental unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental unit Hosokawa Alpine A FC 200 Flakecrusher. Ijdpfxjh Utyrj Acmebb The Alpine AFC Flake Crusher is used to gently grind brittle and easily breakable materials in order to reduce their size. It can obtain low dust granulates thanks to its gentle crushing process controlling the maximum permissible top cut while avoiding the generation of undesired fines. It´s used for coarse milling and can reach particle sizes between 0,5 and 10 mm depending on the feed product. The AFC can be used for mixture homogenization, flakes granulation, disintegration of agglomerates, increasing bulk density and flowability of clumped materials. It´s fitted with a rotating grinding tool which can work in combination with a sieve of choice to adjust the resulting product according to specification. The sieves exchange is quite fast reducing the unit´s downtime. Suitable for different industries such as pharmaceutical, food, chemicals, etc. Material of construction: stainless steel Without wear protection Non gas tight Non Pressure Shock Resistant (NPSR) Scope: Flake Crusher, motor, controls and screens according to requirements

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Ibjdpfx Acewg Sd Uomjb Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: used, Year of construction: 1999, Document Description Mill for the size reduction and recycling of agglomerates, lumps and granules in mass. Manufacturer: Gericke Model: NBS 300/450 Year: 1999 Choice of granulometry: Grid or wire mesh Operating principle: Rotor with 4 blades. cutting effect on the product with the screen. Inlet section: 300 x 350 mm. Power: 3,7 KW Iodpfex R Apcex Acmebb Max capacity : 12.000 L/H (depending on product and output size). Materials: stainless steel. Mounted on a mobile frame.

Condition: new, Year of construction: 2024, functionality: fully functional, COMPLETE PLASTIC GRANULATION LINES We offer technologically advanced complete plastic granulation lines designed to meet customer needs. Koltex PRS is a Polish manufacturer of high quality machinery and equipment for the various stages of waste recycling: PP,PE,LDPE,LLDPE,PS,ABS,HDPE. We provide comprehensive solutions and support for machine configuration. The innovative technologies of our recycling systems guarantee the highest degree of user-friendliness and equipment efficiency. We offer all the machines needed to configure a complete plastic recycling line. The XR 8 granulation line is the latest model from Koltex Plastic Recycling Systems in the field of LDPE film processing. In addition to the well-known technological solutions used in standard extruders, a number of changes have been made to achieve high production rates while improving the quality of the regranulate achieved. The new system is characterized by low energy consumption and significantly simplified operation thanks to the new SMART software. Numerous modifications have reduced the machine footprint by 30% compared to the previous model, but also increased productivity by 45% while reducing energy requirements by around 15%. An intelligent temperature control system for the plastic in the Agglomerator and an automatic material dosing system ensure process stability. Thanks to the automation of the process, operator involvement has been reduced to a minimum. Our offer also includes: Complete systems for plastics recycling Mills Plastification systems, vibrating screens, centrifuges Ibodpfx Acsuqmavomjb Screen changers Peripheral equipment Washing lines (DWFS®) Dynamic washing machines Drying separators Granulation and extrusion lines Service and spare parts You can find out more about our range of products in this area at our website