Used Agitator for sale (660)

Condition: used, tank capacity: 5,400 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; the half-pipe coil is not shown in the tank drawing Speed: 450 rpm Internal diameter: 1,800 mm Crsdpoxqa Dnofx Ab Tjk Explosion protection: Motor is explosion-proof (compliance with the applicable ATEX guidelines under local conditions must be checked) Total height: 3,700 mm Heating/Cooling: available Power: 3.6 kW Max. overpressure: 6.0 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Propeller Base shape: Ring Location: Bremen Technical documentation: Drawing, acceptance certificate Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,400 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,690 mm Previous application: Chemistry TANK Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway/Dome: on top head (DN 500) Outlet: Flange DN100 Note: minor residues MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI304) AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400/690 volts Bottom bearing: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8 mm Agitator arrangement: eccentric in the top head Agitator documentation: Extensive agitator documentation available Top head wall thickness: 16 mm

Condition: used, tank capacity: 5,500 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Dents in the insulation jacket possible; the manufacturing and documentation drawings are available from the manufacturer and can be purchased separately there Speed: 429 rpm Outer diameter: 1,890 mm Inner diameter: 1,680 mm Total height: 3,500 mm Heating/cooling: available Insulation: available Power: 2.2 kW Max. permitted operating temperature: 140 °C Max. permitted operating overpressure: 2.5 bar Max. overpressure: 2.5 bar Agitator: Propeller Base type: Height-adjustable feet Location: Bremen Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,500 liters Double jacket volume: 154.0 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4571 (AISI 316) Condition: used Crjdpfx Aboxqazaj Tek Last application: brine TANK Max. permitted operating temperature: 140 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permitted vacuum: 1.0 bar Base temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: on top head (DN 400) Note: slight residues present, outlet nozzle cut off Outlet: 38 mm MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt Agitator arrangement: bottom-mounted

Condition: used, tank capacity: 3,690 l, GENERAL Credpfjxqayiox Ab Tjk Equipment: Crane lugs Design: suspended Remarks: Manhole cover incomplete (among others, the sight glass is missing, see photos); support ring made of Fe Speed: 6 - 32 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Overall height: 4,350 mm Heating/cooling: available Power: 11 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Base: Ring Location: Bremen Technical documentation: Drawing, various documents, inspection certificate Jacketed cylinder temperature control: Half-pipe coil Rating plate: Vacuum: 1.0 bar Volume: 3,690 liters Jacket volume: 145.0 liters Cylinder wall thickness: 6 mm Wetted material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Last application: Pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole/dome: in the top cover (DN 500) Outlet: 130 mm MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Agitator arrangement: centered in top cover Agitator equipment: Agitator drive was previously controlled by an external speed controller (no longer present); various technical documents for the agitator available Top cover wall thickness: 7.9 mm

Condition: used, tank capacity: 2,420 l, GENERAL Crodjxqaycepfx Ab Tsk Equipment: Lifting lugs Design: suspended Remarks: Manhole DN 350/450 (manhole cover incomplete); support ring, Fe; flanges partially Fe Speed: 46 - 230 rpm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Overall height: 3,400 mm Heating/Cooling: available Power: 2.2 kW Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: top head removable / hinged Agitator seal: Mechanical seal with thermosiphon vessel Agitator type: Paddle agitator Support type: Ring Location: Bremen Technical documentation: Drawing, various documents, acceptance certificate Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,420 liters Jacket volume: 100.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,180 mm Last application: Pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200°C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: in the top head Outlet: available MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400 Volt Power breaker: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Agitator arrangement: centered in the top head Agitator equipment: Paddle & propeller agitator elements mounted on the shaft; speed previously controlled by external frequency converter (no longer available); various technical documents for the agitator available Top head wall thickness: 7 mm

Condition: used, tank capacity: 3,690 l, GENERAL INFORMATION Design: suspension-mounted Remarks: Support ring made of steel; manway cover incomplete; on one vessel, the heating connections are mostly cut off and supplied loose; one vessel is approximately 100 mm shorter in overall height due to different motor/gearbox assemblies Speed: 42 - 211 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,750 mm Heating/Cooling: available Power: 3 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: blade agitator Support design: ring mounting Location: Bremen Technical documentation: drawing, various documents, inspection certificate Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,690 litres Double jacket volume: 145.0 litres Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Last application: pharmaceutical chemistry VESSEL Max. allowable operating temperature: 200 °C HEATING/COOLING JACKET Max. allowable operating underpressure: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in top head (DN 500) Outlet: 130 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400 Volt Crodpfx Aboxqax Eo Tsk TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Agitator positioning: centred on the top head Agitator features: Minor variations in agitator design (Interprop blade agitator installed on the shaft for media up to approx. 3,000 mPas; on one vessel an additional stabilising propeller is mounted on the shaft); speed range adjustable via external speed controller (no longer available) (for one of the agitators this speed range is 25 - 126 rpm); partial technical documentation on agitators available Top head wall thickness: 7.9 mm

Condition: used, tank capacity: 3,586 l, GENERAL Equipment: lifting lugs Design: suspended Remarks: Sight glasses in manway covers missing; support ring made of Fe; some flanges made of Fe Speed: 30–184 rpm Internal diameter: 1,600 mm Explosion proof: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Overall height: 3,750 mm Heating/Cooling: available Power: 6.8 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: beam agitator Base design: ring Location: Bremen Technical documentation: drawings, various documents, inspection certificate Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Capacity: 3,586 liters Double jacket volume: 202.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,377 mm Last application: pharmaceutical chemicals VESSEL Max. allowable operating temperature: 200 °C HEATING/COOLING JACKET Max. allowable operating vacuum: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manhole / Dome: on top head (DN 500) Outlet: 130 mm MATERIAL DETAILS Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400/690 Volt Current interrupter: Cedoxqaxxepfx Ab Terk TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Agitator arrangement: centrally in top head Agitator equipment: Technical documentation for agitator available; Interprop beam agitator and inclined blade agitator installed on shaft; speed adjustable by handwheel Top wall thickness: 9.1 mm

Condition: used, tank capacity: 3,586 l, GENERAL Equipment: Lifting lugs Design: Suspended Remarks: Further technical documentation available; Sight glass on manhole cover is missing; Support ring made of mild steel; Flanges partly made of mild steel Speed: 6 - 40 rpm Internal diameter: 1,600 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be checked) Total height: 4,250 mm Heating/cooling: Available Power: 3.5 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Seal type: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Base type: Ring base Location: Bremen Codpfxsxqaxrs Ab Tjrk Technical documentation: Drawing, acceptance certificate Jacket heating/cooling: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,586 liters Double-jacket volume: 202.0 liters Cylinder wall thickness: 6 mm Product-contact material: Stainless steel V4A 1.4435 (AISI316) Condition: Used Cylindrical height: 1,377 mm Last application: Pharmaceutical chemistry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Base heating/cooling: Half-pipe coil EQUIPMENT Manhole / Dome: On top head (DN 500) MATERIAL SPECIFICATION Jacket system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 400/690 Volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Agitator arrangement: Centered on top head Agitator equipment: Drive adjustable via handwheel Top head wall thickness: 9.1 mm

Condition: used, tank capacity: 3,860 l, GENERAL INFORMATION Equipment: Crane lugs Design: Suspended Notes: Support ring, Fe; manhole cover incomplete (see photos) Rotation speed: 61 rpm External diameter: 2,090 mm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Total height: 3,050 mm Heating/Cooling: available Insulation: available Power: 4 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: Beam agitator Stand/base type: Ring Location: Bremen Technical documentation: Drawing, various documents Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,860 litres Double jacket volume: 136.0 litres Csdpfexqaxljx Ab Tjrk Cylinder wall thickness: 6 mm Product contact material: V4A 1.4435 (AISI316) Condition: used Last application: pharmaceutical chemistry VESSEL Max. permitted operating temperature: 200 °C HEATING/COOLING JACKET Max. permitted operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: riveted Insulation jacket material: aluminium EQUIPMENT Manway / Dome: in upper head (DN 600) Outlet: available Note: Dents in insulation jacket, manway cover plated MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 400/690 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.17 mm Agitator arrangement: centrally positioned in upper head Agitator equipment: Gearbox housing slightly damaged in one area (see photos) Upper head wall thickness: 8.14 mm

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: crane lugs Design: suspended Notes: 4 support brackets made from V2A; manhole cover fastening bolts incomplete; 1 former connection on the top head was welded shut by the previous operator Internal diameter: 1,390 mm Overall height: 3,000 mm Heating/cooling: available Max. permissible operating temperature: 190 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 1.0 bar Agitator: beam agitator Agitator mounting: agitator flange Support type: brackets Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 liters Jacket volume: 35.0 liters Cylinder wall thickness: 5 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,500 mm Last previous use: chemicals VESSEL Max. permissible operating temperature: 190 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: on top head (DN 500) Discharge: flange DN50 Note: slight adhesions, motor/gearbox missing MATERIAL QUALITY Temperature control system material: V2A 1.4541 (AISI304) AGITATOR 2 Agitator arrangement: lateral on cylinder Cjdpfx Ajxqaw Isb Tsrk AGITATOR 1 Agitator manufacturer: Ekato Baffle: TECHNICAL DATA / DIMENSIONS Base wall thickness: 4.6 mm Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 5,000 l, GENERAL INFORMATION Equipment: Ball valve Design: Suspended Remarks: Top cover made from V2A (1.4301); 4 support feet made of steel; minor material wear inside the vessel Internal diameter: 1,880 mm Total height: 3,550 mm Heating/Cooling: present Crsdsxqawuepfx Ab Tsk Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: Removable / hinged top cover Agitator type: Beam agitator Stand type: Feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Cylinder wall thickness: 10.2 mm Product-contacting material: V4A 1.4429 (AISI316) Condition: Used Cylindrical height: 1,580 mm Last application: Chemical industry HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway / Dome: On the top cover (Ø 450) Outlet: DN40 DIN 11851 Note: Light residues, motor/gearbox missing MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) Flange material: Steel AGITATOR 1 Agitator manufacturer: Fluid TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8.3 mm Agitator arrangement: Centered in top cover Top cover wall thickness: 4.5 mm

Condition: used, Year of construction: 2007, tank capacity: 1,700 l, GENERAL Equipment: Spray head Design: upright Year of construction: 2007 Outer diameter: 1,400 mm Inner diameter: 1,170 mm Total height: 3,250 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 8.0 bar Max. overpressure: 4.0 bar Top head: removable / hinged top head Agitator: bucket agitator Agitator shaft: agitator flange Support design: height-adjustable feet Location: Bremen Technical documentation: drawing, various documents Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,700 liters Double jacket volume: 230.0 liters Product-contacting material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,170 mm Last application: pharmaceutical VESSEL Max. permissible operating temperature: 100 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket Credpfx Ajxqauaeb Tjk INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole/Dome: on top head (DN 500) MATERIAL SPECIFICATION Exterior surface: high gloss Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 2 Agitator position: side-mounted on cylinder AGITATOR 1 Agitator position: off-center in top head Agitator equipment: motor/gearbox unit no longer present

Condition: used, tank capacity: 225 l, GENERAL INFORMATION Features: crane lugs Design: vertical Notes: 4-legged frame made of V2A; handhole diameter approx. 155 mm Speed: 156 - 838 rpm Outer diameter: 800 mm Inner diameter: 590 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 2,400 mm Heating/cooling: available Insulation: available Power: 0.75 kW Max. permissible operating temperature: 95 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 1.0 bar Top cover: removable/hinged top cover Shaft seal: mechanical seal with thermosiphon vessel Agitator: propeller Base design: frame Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 225 liters Double jacket volume: 60.0 liters Crsdpfx Aboxqatvj Tsk Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: chemical industry VESSEL Max. permissible operating temperature: 95 °C HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole: handhole Note: slight adhesions Outlet: 25 mm MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: Stelzer Voltage: 220/380 Volt Interference suppressor: Agitator arrangement: centrally in top cover Agitator features: speed adjustable via handwheel

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Spray head Design: vertical External diameter: 1,300 mm Internal diameter: 1,100 mm Total height: 2,300 mm Heating/Cooling: available Insulation: available Power: 1.1 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Agitator: Magnetic stirrer Support type: Legs Location: Bremen Technical documentation: Drawings, TÜV papers, various documents Cylinder temperature control: Double jacket Name plate: Vacuum: 1.0 bar Volume: 1,000 liters Double jacket volume: 72.0 liters Cylinder wall thickness: 10 mm Wetted material: V4A 1.4401/04 (AISI 316) Condition: used Cylindrical height: 1,000 mm Last application: Pharmaceuticals TANK Max. permissible operating temperature: 150 °C Number of legs: 3 pcs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation material: Mineral wool Insulation jacket material: Stainless steel EQUIPMENT Manhole/Dome: on top (DN 400) Outlet: available Outlet: 50 mm MATERIAL SPECIFICATION Temperering system material: V4A 1.4571 (AISI 316) Legs material: Stainless steel Cedpfx Aboxqar Sj Tsrk AGITATOR 1 Agitator manufacturer: Aprotec Voltage: 220/380 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.6 mm Agitator arrangement: Bottom-mounted Agitator documentation: Various technical documents for the agitator available Top wall thickness: 6.3 mm

Condition: used, tank capacity: 1,344 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: The container was modified at the end of 2012 (nozzle welding and shortening of the support legs; TÜV inspection certificate available; the drawing attached in the documentation is the original drawing; 1 dent in the insulation jacket) Speed: 440 / 940 RPM Outer diameter: 1,350 mm Inner diameter: 1,180 mm Total height: 2,400 mm Heating/Cooling: present Insulation: present Power: 0.33 / 1.85 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 3.0 bar Mechanical seal: Mechanical seal with thermosyphon vessel Agitator: Propeller Support: Height-adjustable feet Location: Bremen Technical documentation: Drawing, TÜV certificates Cylinder tempering: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,344 liters Double jacket volume: 76.0 liters Cylinder wall thickness: 8 mm Product contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 750 mm Last application: Pharmaceutical TANK Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING / COOLING JACKET Bottom tempering: Double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / dome: in the top head (DN 500) Outlet: DN80 DIN 11851 MATERIAL PROPERTIES Material of tempering system: V2A 1.4301 (AISI304) Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 380 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.8 mm Agitator arrangement: Eccentric in the top head Top head wall thickness: 6 mm Crodpfoxqaqhex Ab Tjk

Condition: used, tank capacity: 1,100 l, GENERAL Equipment: Spray head Design: vertical Remarks: Original drawing available; vessel was modified at the end of 1996 (test report available, no modification drawing); 1 welded bracket inside the vessel Speed: 705 rpm Outer diameter: 1,400 mm Inner diameter: 1,200 mm Total height: 2,450 mm Heating/Cooling: available Insulation: available Csdoxqaqbopfx Ab Terk Power: 1.5 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 2.5 bar Max. overpressure: 2.5 bar Top head: removable/hinged top Mechanical seal: mechanical seal with thermal siphon vessel Agitator: propeller Base type: feet Location: Bremen Technical documents: drawing, TÜV certificates Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,100 litres Double jacket volume: 192.0 litres Wall thickness cylinder: 8 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 840 mm Last application: Pharmaceuticals VESSEL Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom head temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: on top head (DN 400) Outlet: DN80 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI 316) Feet material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Head wall thickness: 8 mm Agitator arrangement: eccentric in the top head

Condition: used, Year of construction: 2010, tank capacity: 1,410 l, GENERAL Equipment: spray head, crane lugs Design: suspended Year of manufacture: 2010 Notes: 4 stainless steel support feet; total height is estimated; 1 heating connection cut off; slight metallic discoloration inside the tank; 1 external dirt protection collar over the feet (diameter approx. 1,740 mm) Speed: 960 rpm Outer diameter: 1,450 mm Crodpfjxqap Dox Ab Tek Inner diameter: 1,300 mm Total height: 2,250 mm Heating/Cooling: present Insulation: present Power: 3 kW Max. permissible operating temperature: 150 °C Max. permissible operating pressure: 4.0 bar Max. overpressure: 3.0 bar Agitator: propeller Support type: feet Location: Bremen Technical documentation: drawing, TÜV papers, various documents, CE marking and declaration of conformity, operating manual Jacket temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,410 liters Double jacket volume: 93.0 liters Cylinder wall thickness: 8.4 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 700 mm Last intended use: cosmetics VESSEL Max. permissible operating temperature: 150 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: on the top cover (DN 500) Outlet: 65 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.9 mm Agitator arrangement: bottom-mounted Top wall thickness: 6.1 mm

Condition: used, Year of construction: 2008, tank capacity: 2,900 l, GENERAL Equipment: Lifting lugs Construction type: Suspended Year of manufacture: 2008 Remarks: 4 support feet made of stainless steel; total height is estimated; 1 heating connection cut off; slight metallic discoloration inside the tank Speed: 960 rpm Outer diameter: 1,800 mm Inner diameter: 1,650 mm Total height: 2,600 mm Heating/cooling: available Insulation: available Power: 4 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 3.0 bar Agitator: Propeller Support type: Feet Location: Bremen Technical documentation: Drawing, TÜV certificates, various documents, CE marking and declaration of conformity Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,900 liters Double-jacket volume: 110.0 liters Cylinder wall thickness: 4.8 mm Csdpsxqapwjfx Ab Tjrk Product-contacting material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 900 mm Last application: Cosmetics TANK Max. permissible operating temperature: 150 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / dome: on the top head (DN 500) Outlet: 65 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.5 mm Agitator arrangement: Bottom entry Agitator documentation: Technical documentation for the agitator available Top head wall thickness: 6.7 mm

Condition: used, Year of construction: 2008, tank capacity: 1,410 l, GENERAL Equipment: Spray head, crane lugs Design: suspended Year of manufacture: 2008 Remarks: 4 stainless steel support legs; overall height is estimated; slight metallic discolorations inside the tank Speed: 960 RPM Outer diameter: 1,450 mm Inner diameter: 1,300 mm Overall height: 2,400 mm Heating/Cooling: available Insulation: available Power: 3 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 3.0 bar Agitator: propeller Base type: support legs Location: Bremen Technical documentation: drawing, TÜV certificates, various documents, CE marking and declaration of conformity, operating manual Credpfx Aoxqapqsb Tek Shell tempering: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,410 liters Double jacket volume: 93.0 liters Cylinder wall thickness: 8.4 mm Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 700 mm Last application: cosmetics TANK Max. permissible operating temperature: 150 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom tempering: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway/dome: on top (DN 500) Discharge: 65 mm AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.9 mm Agitator arrangement: bottom-mounted Agitator equipment: technical documentation for the agitator available Top wall thickness: 6.1 mm

Condition: used, Year of construction: 2007, tank capacity: 1,880 l, GENERAL Equipment: Spray head, crane lugs, control cabinet (no guarantee) Design: vertical Year of manufacture: 2007 Remarks: 1 pump (brand GRUNDFOS) is included in the scope of delivery; 1 control cabinet (previously operated with 3 of these tanks by the former owner) can be purchased at extra cost (see photos) Speed: 329 RPM External diameter: 1,520 mm Internal diameter: 1,250 mm Total height: 2,600 mm Heating/Cooling: present Insulation: present Power: 0.75 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Agitator: Magnetic stirrer Stand design: Height-adjustable feet Location: Bremen Technical documentation: Drawings, various documents, CE marking and declaration of conformity Cylinder heating/cooling: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,880 liters Jacket volume: 97.0 liters Cylinder wall thickness: 5 mm Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,140 mm Previous application: Pharmaceutical VESSEL Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Crjdpfjxqangsx Ab Tsk Bottom temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation material: Mineral wool Insulation jacket material: Stainless steel EQUIPMENT Manhole / Dome: in top head (DN 400) Outlet: 48 mm MATERIAL SPECIFICATION Temperature control system material: AISI 316 (V4A) 1.4404 Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Agitator arrangement: Bottom-mounted

Condition: used, Year of construction: 2007, tank capacity: 880 l, GENERAL INFORMATION Equipment: Spray head, crane lugs, control cabinet (no guarantee) Design: vertical Year of manufacture: 2007 Speed: 329 rpm External diameter: 1,060 mm Internal diameter: 900 mm Crjdpfx Aboxqanas Tjk Overall height: 2,300 mm Heating/cooling: available Insulation: available Power: 0.55 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Top cover: removable / hinged Agitator: magnetic stirrer Base design: height-adjustable feet Location: Bremen Technical documentation: drawing, various documents, CE marking and declaration of conformity Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 880 liters Double jacket volume: 41.0 liters Cylinder wall thickness: 10 mm Double jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4401/04 (AISI 316) Condition: used Cylindrical height: 1,150 mm Previous application: pharmaceuticals TANK Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel FEATURES Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8 mm Agitator arrangement: underfloor

Condition: used, Year of construction: 2007, tank capacity: 390 l, GENERAL Equipment: Spray head, crane lugs, control cabinet (no guarantee) Design: vertical Cjdpfexqam Aox Ab Terk Year of manufacture: 2007 Remarks: 1 pump included in the scope of delivery (no guarantee of functionality) External diameter: 810 mm Internal diameter: 650 mm Total height: 2,050 mm Heating/cooling: present Insulation: present Power: 0.37 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Top head: removable/top cover can be swung open Agitator: magnetic stirrer Mounting: height-adjustable feet Location: Bremen Technical documentation: drawings, various documents, CE marking and Declaration of Conformity Cylinder temperature control: double jacket Name plate: Vacuum: 1.0 bar Volume: 390 liters Double jacket volume: 26.0 liters Cylinder wall thickness: 8 mm Double jacket material: V2A 1.4301 (AISI304) Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 990 mm Last application: pharmaceuticals VESSEL Max. permissible operating temperature: 150 °C Number of feet: 3 pcs. HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 50 mm EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm

Condition: used, tank capacity: 885 l, GENERAL Equipment: Crane lugs Cjdpfxjxqamve Ab Tsrk Design: suspended Comments: The containers were previously suspended by the previous operator in a ring with load cells, which was installed in the floor (one ring each is included in the scope of delivery; see photos); External diameter in ring approx. 1,540 mm; Insulation jacket made of material 1.0425 Speed: 416 RPM Internal diameter: 1,000 mm Heating/cooling: available Insulation: available Power: 0.55 kW Max. permissible operating temperature: 140 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: Magnetic stirrer Location: Bremen Technical documentation: Drawing, various documents Jacket temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 885 liters Double-jacket volume: 35.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 864 mm Last application: Pharmaceuticals TANK Max. permissible operating temperature: 130 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: half-pipe coil INSULATION Insulation material: mineral wool EQUIPMENT Manhole / dome: in top head (DN 500) Outlet: 55 mm MATERIAL SPECIFICATION Material of temperature control system: V2A 1.4541 (AISI304) AGITATOR 1 Agitator manufacturer: MAVAG AG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.5 mm Agitator arrangement: bottom entry Agitator equipment: agitator data from one of the two tanks, the second tank does not have a motor nameplate (we assume the agitator data are identical); various technical documents relating to the magnetic agitators

Condition: used, tank capacity: 1,300 l, GENERAL Equipment: Crane lugs Design: vertical Notes: Various technical documents available Speed: 417 rpm External diameter: 1,470 mm Internal diameter: 1,200 mm Total height: 2,100 mm Heating/cooling: present Insulation: present Power: 1.1 kW Crjdpfxexqampo Ab Tsk Max. permissible operating temperature: 140 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: magnetic stirrer Base type: feet Location: Bremen Technical documentation: drawing Tank temperature control: double jacket Nameplate: Vacuum: 1.0 bar Capacity: 1,300 liters Double jacket volume: 80.0 liters Cylinder wall thickness: 5.7 mm Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 830 mm Last application: pharmaceuticals TANK Max. permissible operating temperature: 130 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permissible negative pressure: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel EQUIPMENT Manway / dome: on top head (DN 500) Outlet: 50 mm MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 Feet material: stainless steel AGITATOR 1 Agitator manufacturer: MAVAG AG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7.5 mm Agitator arrangement: bottom mounted Agitator equipment: Various technical documentation for the magnetic stirrers Top wall thickness: 4.5 mm

Condition: used, tank capacity: 920 l, GENERAL Equipment: Crane lugs Design: upright Speed: 412 rpm Outer diameter: 1,270 mm Credpfexqamijx Ab Tok Inner diameter: 988 mm Total height: 2,100 mm Heating/cooling: available Insulation: available Power: 0.75 kW Max. permissible operating temperature: 140 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: magnetic stirrer Base type: feet Location: Bremen Technical documentation: drawings, various documents Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 920 liters Double jacket volume: 70.0 liters Cylinder wall thickness: 5.7 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 906 mm Last previous use: pharmaceuticals VESSEL Max. permissible operating temperature: 130 °C Number of feet: 3 pieces HEATING/COOLING JACKET Max. permissible negative operating pressure: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top head (DN 500) Outlet: 55 mm MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 Foot material: stainless steel AGITATOR 1 Agitator manufacturer: MAVAG AG Voltage: 230/400 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Agitator arrangement: bottom-mounted Agitator equipment: various technical documents for the magnetic stirrers Top wall thickness: 4.5 mm

Condition: used, tank capacity: 890 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: 4 mounting feet, Fe; outlet with flanged fitting Speed: 6.7 - 41 rpm Outer diameter: 1,200 mm Inner diameter: 1,100 mm EX-protected: Motor is explosion-proof (compliance with current ATEX guidelines under local conditions must be verified) Overall height: 2,700 mm Heating/Cooling: available Power: 1.5 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 10.0 bar Max. overpressure: 6.0 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Support design: Mounting feet Location: Bremen Technical documentation: Drawing, various documents, inspection certificate Cylinder temperature control: Jacketed Nameplate: Vacuum: 1.0 bar Credjxqaiwjpfx Ab Tok Volume: 890 liters Jacket volume: 145.0 liters Cylinder wall thickness: 10 mm Product-contact material: V4A 1.4571 (AISI316) Condition: Used Last application: Chemical VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom plate temperature control: Double jacket EQUIPMENT Manhole / Dome: Top head (DN 400) Outlet: DN80 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) AGITATOR 1 Agitator manufacturer: Ekato Voltage: 220/380 volts TECHNICAL DATA / DIMENSIONS Bottom plate wall thickness: 10 mm Agitator arrangement: Centrally on top head Agitator features: Drive steplessly adjustable via handwheel Top head wall thickness: 8 mm