Used Climate Chamber for sale (6,178)

Condition: excellent (used), Here we offer a Weiss climate test chamber. Designation: SB2/500/80, water-cooled Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Ijdpezd Ultsfx Aqueau Type: SB2/500/80 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Feutron Type: 3702/06 Water-cooled climate test chamber Technical data: Nominal volume of test chamber: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width 2000 mm, height 1000 mm Viewing window, heated, 2 pieces, width 500 mm, height 600 mm Feed-through opening, 1 piece, left side wall, diameter 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, time-dependent ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling up to 2.0 on average K/min Heating up to 2.0 on average K/min Humidity range: 10...95 % RH Humidity difference, time-dependent ≤ ± 3.0 % RH Dew point range, intermittently up to -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and dryer refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Iasdpfx Aqozd Sdmouou Electrical connection: 400V 3/N/PE.AC, 50Hz Power plug: CEE 5-pin, 32 A, with 5.0 m cable Max. simultaneous power requirement: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm Isdezd Sdgepfx Aqusau External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), We offer a climate test chamber for sale. Air-cooled Test chamber nominal volume: 280 liters Dimensions: External dimensions of the test chamber: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range: +5 to +100 °C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Climate range: +10 to +95 °C Humidity range: 10 to 95 % RH Humidity change rate: ≤ ± 3.0 Water connection for humidifier: Tap water or distilled water, 20-liter reservoir Power connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 500 kg Type: 3416/16 Refrigerant: R134a For your peace of mind as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Condition: used Ijdszd R T Tepfx Aqusau Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), CTS Climate Chamber, Climate Testing Cell Here we offer a CTS climate chamber, climate testing cell. Available from mid-January 2023! Water-cooled Height adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 Test chamber approx. (W x D x H): 2500 x 2720 x 2200 Test chamber volume: approx. 15 m³ Temperature range: -40°C to +140°C Temperature deviation 1 K over time Average temperature change rate without heat radiation, measured in the supply air Heating: 2 K/min Cooling: 1 K/min from +110 °C to -35 °C Iajdpfjzd R A Uex Aquju Climate tests: Temperature range: +10 °C to +90 °C Humidity range: +30% to +95% RH in the dew point range: +5°C to 89°C Temperature deviation 0.5 K over time Humidity deviation ±1 to ±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Rated power: 53.5 KW Rated current: 92.3 A Compressor: S6J-16.2 + Chilled water unit Refrigerant: R404A Weight: 5500 kg Type: CW-40/16 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), RS Simulators We offer a climate testing chamber here. Water-cooled 300 liters Temperature range from -75 °C to +180 °C Time deviation: +- 0.2 K to +- 0.8 K Average heating rate: approx. 2.1 K/min Average cooling rate: approx. 1.2 K/min Humidity range from 10 % to 98 % relative humidity Operating climate range Temperature: 10 °C to 95 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 1000 mm, Height 1800 mm, Depth 1400 mm Voltage: 3x400V/N/PE, Current: 40A Refrigerant: R404a / R23 Type: KS 300 / 75 Weight: 630 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Ijdpezd R Ausfx Aqusau Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS-Simulatoren, water-cooled Climate chamber 110m³ incl. condenser The KKM 110/45 type belongs to the TKM/KKM modular design of RS-Simulatoren, meaning it is a climate chamber with a modular structure that is assembled on-site. This design offers: Modularity: Individual segments are pre-assembled and installed at the customer's location. This makes retrofitting (more depth or additional modules) as well as later relocation straightforward. Technical data climate chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Type: KKM 110/45 External dimensions: 6200 x 9400 x 3400 (W x D x H in mm) incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 (W x D x H in mm) Chamber door (double-leaf) 3600 x 2930 (W x H in mm) Personnel door (single-leaf) on side wall 1880 x 900 (H x W in mm) Feedthroughs: 8 x Ø120mm (4x left & 4x right) Windows: 1x (460 x 550mm) in the front chamber door, heated 1x (1260 x 1000mm) in the left side wall, heated Temperature range: -40°C to +120°C Time deviation: ± 0.8K – 1.5K according to DIN 50011 in an empty test chamber Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52kg 2x R23 17kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Max. surface load 500kg / m² Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg Iasdpfx Aqewwg Uvsuou For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerants 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch VC 4034 Climate Chamber / Temperature Chamber Description: For sale is a used climate and temperature chamber from the manufacturer Vötsch Industrietechnik. This unit is suitable for demanding temperature and climate tests in research, development, quality assurance, the electronics industry, automotive technology, as well as material and aging tests. The test chamber has been converted to the modern refrigerant R452A and features a user-friendly touch panel control. Thanks to the large test chamber volume of approximately 335 liters, the system is suitable for both individual test specimens and for extensive test setups. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) External dimensions: approx. 780 x 1758 x 1800 mm (W x D x H) Weight: approx. 515 kg Temperature range: -40 °C to +180 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Heating rate: approx. 3.2 K/min Cooling rate: approx. 3.5 K/min Climate operation: Temperature range: -40 °C to +180 °C Humidity range: 10 % to 98 % RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature homogeneity spatially: ±0.5 to ±1.0 K Refrigerant: R452A Filling quantity: 2.5 kg GWP: 2141 CO₂ equivalent: 5.35 t ND max.: 22 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment: Touch panel control Programmable test sequences Stainless steel interior Viewing window in the door Test chamber lighting Air circulation system Side feedthrough for measuring cables Several stainless steel insert shelves Air-cooled refrigeration system Documentation available Application areas: Temperature testing Climate testing Material testing Electronics testing Aging tests Environmental simulation Quality assurance Research and development Automotive testing Condition: Used Iasdjzd Dm Hspfx Aqusu Optical condition as shown in the pictures. Maintenance and calibration stickers are present. Refrigeration circuit converted to R452A. Scope of supply: 1x Vötsch VC 4034 Climate Chamber Stainless steel insert shelves Touch panel control unit Documentation / Documents Accessories as shown in the pictures Subject to changes and errors in the technical data. Subject to prior sale.

Condition: good (used), Weiss Umwelttechnik GmbH Salt spray chamber / corrosion test chamber Used salt spray chamber Weiss SC/KWT 450 for corrosion, salt spray, and condensation water tests according to common industry standards. The system is suitable for material testing, coating testing, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Test chamber volume: 450 liters Max. load: 100 kg Brine reservoir: 180 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Salt spray test up to +50 °C Condensation water test up to +45 °C Humidifier up to +75 °C Power connection: 230 V / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Iodozd Az Ajpfx Aqusau Equipment: Control unit Test chamber with sample holders Brine supply system Documentation / Service manual Accessories as shown in the pictures Scope of delivery Salt spray chamber Weiss SC/KWT 450 Documentation Accessories as shown in the pictures Condition Used, optical condition as shown in the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Condition: good (used), Weiss Umwelttechnik GmbH Salt spray chamber / corrosion test chamber Used salt spray chamber Weiss SC/KWT 450 for corrosion, salt spray, and condensation water tests according to common industry standards. The system is suitable for material testing, coating testing, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Test chamber volume: 450 liters Max. load: 100 kg Brine reservoir: 180 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Salt spray test up to +50 °C Condensation water test up to +45 °C Humidifier up to +75 °C Power connection: 230 V / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment: Control unit Test chamber with sample holders Brine supply system Documentation / Service manual Accessories as shown in the pictures Scope of delivery Salt spray chamber Weiss SC/KWT 450 Documentation Accessories as shown in the pictures Iaedpozd Axbefx Aquou Condition Used, optical condition as shown in the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Condition: excellent (used), Binder MKFT 720 E3.2 Temperature and Humidity Chamber Device Data Manufacturer: Binder Type: MKFT 720 E3.2 Year of Construction: 2017 Article Number: 9020-0288 Design: Temperature and Humidity Chamber Cooling: Air-cooled Description Used temperature and humidity chamber from Binder. Suitable for temperature, climate, material, and aging tests, as well as stress tests. Application in industry, research, development, and quality assurance. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Internal volume: approx. 734 liters Max. total load: 160 kg Max. load per shelf: 40 kg Dimensions External (W x H x D): 1615 x 2005 x 1230 mm Internal (W x H x D): 1200 x 1020 x 600 mm Electrical Data 400 V / 3N~ / 50 Hz Power: 13.0 kW Iaedpfsy H H Smjx Aqusu Current: 22.5 A Protection class: IP 20 Refrigeration System Refrigerant: R404A / R23 Stage 1: 4.00 kg Stage 2: 0.87 kg Two-stage refrigeration system Max. operating pressure: 29 bar Performance Data Temperature Temperature deviation over time: 0.1 to 0.5 K Temperature deviation spatially: 0.3 to 2.0 K Heating rate: approx. 4.8 K/min Cooling rate: approx. 4.0 K/min Heat compensation: approx. 5000 W Performance Data Climate Climate range: +10 °C to +95 °C Humidity range: 10 % to 98 % RH Temperature deviation: 0.1 to 1.0 K Heat compensation: approx. 800 W Equipment Touch control panel Program and constant operation Observation window Stainless steel test chamber Internal lighting Cable entry Movable on rollers Robust industrial design Weight approx. 635 kg Scope of Supply Binder MKFT 720 E3.2 Temperature and Humidity Chamber Scope of supply as shown in the pictures Functional testing Refrigerant service Leak test Test run with protocol Condition: Used. Condition: See pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Binder MK 115 E3.1 Temperature Cycling Chamber Device Data Manufacturer: Binder Type: MK 115 E3.1 Article Number: 9020-0175 Design: Temperature Cycling Chamber Refrigerant: R404A (1.20 kg) Description Used temperature cycling chamber from Binder. Suitable for dynamic temperature tests and rapid temperature changes. Used in material testing, research, and quality assurance. Technology APT.line™ preheating chamber technology Natural simulation of temperature profiles High precision and reproducibility Features MCS controller with program memory Adjustable ramp functions Temperature selector limiter Class 2 (DIN 12880) Heated viewing window with interior lighting Ethernet interface Feedthrough Ø 50 mm (left) Stainless steel interior with insert 4 rollers (2 lockable) Technical Data Temperature range: -40 °C to +180 °C Fast temperature changes (temperature cycling mode) Interior volume: 115 liters Dimensions External (W x H x D): approx. 980 x 1725 x 865 mm Internal (W x H x D): approx. 600 x 480 x 400 mm Electrical Data Iaedpfx Aoy H Hvloquou 400 V / 50 Hz Power: 3.5 kW Current: 11.0 A Pressure Data Max. operating pressure: 29 bar Weight approx. 260 kg Condition: Used. Optical and technical condition, see pictures. Scope of delivery: Binder MK 115 temperature cycling chamber Insert / interior fittings Inspection possible by arrangement. Loading and transport can be arranged upon request. Subject to change and prior sale. If you have any questions, please contact us.

Condition: excellent (used), Weiss Technik SaltEvent Type: SaltEvent SC/UKWT 1500 Operating hours: approx. 11,889 hours Year of manufacture: 2022 Cyclic corrosion test chamber / Salt spray test chamber For sale is a high-quality Weiss Technik SaltEvent SC/UKWT 1500 for corrosion, salt spray, condensation, and climatic change tests. The device is suitable for use in industry, research, development, and quality assurance. Technical data: Manufacturer: Weiss Technik GmbH Type: SaltEvent SC/UKWT 1500, with ring spray line Year of manufacture: 2022 Test chamber volume: approx. 1450 liters Temperature / climate data: Temperature range for climate testing: +23°C to +70°C Humidity range: 20% to 98% RH Dew point range: +12°C to +69°C Salt spray test: Ambient temperature +5 K to +50°C Condensation test: Ambient temperature +5 K to +42°C Electrical data: Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: 9.8 kW Rated current: 18 A Refrigerant according to nameplate: R134a – 1.30 kg – GWP 1430 CO2 equivalent: 1.86 t Maximum permissible system pressure (ND max.): 17 bar g Maximum permissible condensing pressure (HD max.): 25 bar g Media connections: Compressed air / GN2: max. 12 bar Demineralized water: min. 3 bar / max. 5 bar Water connection for ring spray line: max. 6 bar Condensate drain available Exhaust connection available Power connection: 3/N/PE 400 V / 50 Hz Dimensions according to drawing: External dimensions approx.: 3710 x 1537 x 1769 mm Test chamber length approx.: 2365 mm Insertion height approx.: 850 mm Weight according to nameplate: approx. 710 kg Operating hours according to display: Iasdpfx Aqoy Hkg Iousu approx. 11,889 hours Equipment / Features: S!MPAC / Webseason touch control panel Ethernet / network connection USB interface Salt spraying Condensation test Dry climate Climate / humidity operation Ring spray line Reservoir Insertion rods Control cabinet integrated Exhaust connection Compressed air connection Connection for demineralized water Water connection for ring spray line Condition: Used Optical condition according to the images Normal storage and usage marks present Important note: All information has been compiled to the best of our knowledge based on the images, nameplates, and manufacturer information. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1500 Scope of delivery as shown in the images Inspection possible by arrangement. Loading can be organized. (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), ESPEC Climate Testing Chamber PL-3KPH Manufacturer: ESPEC Corp. Type: PL-3KPH Design: Air-cooled temperature and climate testing chamber For sale is a used ESPEC climate testing chamber for temperature and climate testing in research, development, quality assurance, and industry. Technical data: Test chamber volume: approx. 400 liters Temperature range: approx. -40 °C to +180 °C Humidity range: approx. 20 % to 98 % RH Internal dimensions (W x H x D): approx. 600 × 850 × 800 mm External dimensions (W x H x D): approx. 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. power consumption: approx. 11 A Weight: approx. 350 kg Cooling: air-cooled No external water connection required Refrigerant according to label: R452A – approx. 1.2 kg Features: Touchscreen control Programmed and constant operation Temperature and humidity control Observation window in the door Stainless steel test chamber Interior lighting / Chamber Lamp Side cable/pipe passage Ø approx. 100 mm Overheat protection Hour counter integrated Iajdpfxsy N Awqj Aquou RS-232C interface Water tank system Specimen Power Supply Control Time Signal connection Condition: Used unit with signs of age and wear. Some rust and corrosion spots are present in the lower housing area. Interior with signs of use. Optical condition, see pictures. Scope of delivery: ESPEC Climate Testing Chamber PL-3KPH Shelf included Scope of delivery as shown in the pictures Service: Functional check and replacement of necessary components Refilling with legally compliant refrigerant if required Leak test with certificate Notes: Inspection possible by arrangement. Loading can be organized. Commercial sale Important note: All information has been provided to the best of our knowledge based on the pictures, nameplates and manufacturer information. Shipping possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: excellent (used), RS-Simulators Climate Chamber KSS 600/75-10K Device Data Manufacturer: RS-Simulators Prüf- und Messtechnik GmbH Type: KSS 600/75-10K Design: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used climate test chamber from RS-Simulators. Suitable for temperature tests, climate tests, material and aging tests. Application in industrial testing and measurement. Technical Data Temperature range: -75 °C to +180 °C Temperature change: Heating/cooling approx. 10 K/min Test chamber volume: approx. 600 liters Dimensions Internal (W x D x H): 840 x 840 x 840 mm External (W x D x H): 1200 x 1600 x 1995 mm Electrical Data 400 V / 3~ / N / PE Current consumption: approx. 55 A Refrigeration System Refrigerant: R404A / R23 R404A: 6.0 kg R23: 3.0 kg Weight approx. 1400 kg Ijdpjy H Ib Ajfx Aqueau Equipment RS-Simulators control panel / operating panel Program operation Observation window Temperature monitoring in the test chamber Operating hour counter Side feed-through Robust industrial design Scope of delivery RS-Simulators climate chamber KSS 600/75-10K Scope of delivery as shown in the pictures Functional test Refrigerant service Leak test Condition: Used. Condition: See pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Vötsch VC³ 4018 Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018 Machine Type: Climate Test Chamber / Temperature Test Chamber Design: Air-cooled Test Chamber Volume: approx. 190 liters For sale is a used climate test chamber from the manufacturer Vötsch. The VC³ 4018 is suitable for temperature and climate tests, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development applications. Technical Data: Temperature Range: -40 °C to +180 °C Temperature Change Rate (Heating): approx. 4 K/min Temperature Change Rate (Cooling): approx. 4 K/min Max. Heat Compensation in Temperature Operation: approx. 2300 W Temperature Deviation (Time): ± 0.1 to ± 0.5 K Temperature Homogeneity (Spatial): ± 0.5 to ± 1.5 K Climate Range (Temperature): +10 °C to +95 °C Dew Point Range: -3 °C to +94 °C Humidity Range: 10 to 98 % RH Temperature Deviation (Time) in Climate Operation: ± 0.1 to ± 0.3 K Temperature Homogeneity (Spatial) in Climate Operation: ± 0.5 to ± 1 K Humidity Deviation (Time): ± 1 to ± 3 % RH Heat Compensation in Climate Operation: approx. 400 W Test Chamber Dimensions (approx.): 580 x 450 x 750 mm (W x D x H) Housing Dimensions (approx.): 870 x 1550 x 1800 mm (W x D x H) Weight (approx.): 470 kg Refrigerant: R404A Refrigerant Quantity: 2.50 kg ND max.: 22.5 bar g HD max.: 25 bar g Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 4.1 kW Rated Current: 14 A Test Chamber Lighting: Halogen, 2 x 24 V / 50 W Equipment Touch Panel Operation Viewing Window in the Door Stainless Steel Test Chamber Test Chamber Lighting Side Pass-Throughs Shelves / Interior Fittings as Shown in Pictures Documentation / Operating Manual Further Accessories as Shown in Pictures Condition Used Optical Condition as Shown in Pictures Scope of Delivery as Shown Inspection Possible by Appointment Safety Note For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Due to the size and weight, shipping by freight forwarder is recommended. Iodpfx Aqozc Ht Ijusau Scope of delivery as shown. Subject to change and errors in the technical data, as well as prior sale.

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Iaedpfxszcxbws Aquou Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Year of construction: 2019, condition: excellent (used), Memmert ICH 750 L eco – ex demo (2019) – L version with lighting We offer a Memmert ICH 750 L eco climate chamber, L version (with lighting), from 2019. This unit comes directly from the manufacturer's showroom and has been used very little. It is in very good technical and visual condition. Key features: * Model: ICH 750 L eco (L version – with lighting) * Year: 2019 (ex demo) * Capacity: approx. 750 liters * Temperature range: * without humidity: 0°C to +60°C * with humidity: 0°C to +60°C * Humidity range: 10–80% RH * Energy-efficient ECO cooling system * Digital controller with intuitive operation * Stainless steel chamber L version – lighting: * Integrated lighting system (light + UV) * Ideal for photostability testing (e.g., according to ICH Q1B) * Uniform illumination of samples * Possibility of operation in day/night cycles Isdpfxjymy Utj Aqujau Equipment and advantages: * Precise temperature and humidity control * Very good uniformity of conditions within the chamber * Quiet and stable operation * Reliability and high-quality Memmert construction Condition: Ex demo unit – minimal signs of use, fully functional, tested before sale. Additional information: Upon request, we can send photos, a video of the unit in operation, or conduct an online presentation. 9-month warranty on spare parts for the unit.

Year of construction: 2022, condition: like new (used), Memmert ICH 750 chamber from 2022, like new. Demonstration unit with a one-year warranty on spare parts. Description: Temperature setting range -10 to +60 °C Operating temperature range from -10°C to +60°C without humidity (not suitable for long-term storage at temperatures below zero. Ice may form on the glass door during continuous operation) Operating temperature range from +10°C to +60°C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of a failure Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity Iodpfxszam H Ae Aqujau active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5%

Year of construction: 2021, condition: like new (used), Memmert ICH 260 chamber, manufactured in 2021, in like-new condition. This unit was used for display purposes. One-year warranty on spare parts. Manufacturer’s description: Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range +10 °C to +60 °C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over the function in case of an error Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification Iaodpfx Aozam Hvoqueu humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5%

Year of construction: 2021, condition: excellent (used), Memmert ICH 260L chamber from 2021. The unit comes with a one-year warranty on spare parts. Manufacturer's description: Temperature Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range from +10 °C to +60 °C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of an error Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5% Light Iedpozam Hiofx Aqujau Daylight and ultraviolet light can be programmed individually using the controller Light cold white light +/- 6%, for UV light +/- 10% Light lighting unit consisting of 4 cold white fluorescent lamps (standard D65 lighting, 6500 K) and 2 UV lamps in the spectral range of 320-400 nm

Year of construction: 2024, condition: like new (used), Memmert HPP 1060 eco chamber, manufactured in 2024. Ex-display unit with a one-year warranty on spare parts. Manufacturer’s description: Temperature setting range without light, with humidity: +5 to +70 °C Temperature setting range without light, without humidity: 0 to +70 °C Iodpfxjzam E Se Aquoau Operating temperature range without light, with humidity: +5 (at least 20 °C below ambient temperature) to +70 °C Operating temperature range without light, without humidity: 0 (at least 20 °C below ambient temperature) to +70 °C Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of an error Humidity Humidity setting range 10 - 90% relative humidity Humidity humidity supplied via distilled water from an external tank using a self-priming pump Humidification humidification using a hot steam generator Dehumidification dehumidification using a desiccant unit employing Peltier technology Humidity setting accuracy 0.5% relative humidity

Condition: good (used), UNHOLTZ-DICKIE / HS-Simulators Vibration Testing System Type: TA117SA-560 + HS 520 K 60 V Manufacturer: UNHOLTZ-DICKIE Corporation / HS-Simulators Horstmann GmbH For sale is a complete electrodynamic vibration testing system consisting of an UNHOLTZ-DICKIE shaker system, SALL50F power amplifier, VWIN II control system, and an HS-Simulators climate chamber. Ideal for combined vibration and climate testing in industrial, automotive, aerospace, electronics testing, as well as research and development applications. The hall crane / other hall equipment visible in the pictures is not included in the scope of supply. Shaker / Vibrator Manufacturer: UNHOLTZ-DICKIE Corporation Type: 560 System: TA117SA-560 Serial Number: 259 Air-cooled electrodynamic shaker Sine force: 6000 lbf peak / 26.7 kN peak Random force: 5200 lbf RMS / 23.1 kN RMS Max. acceleration of free table: 100 g / 981 m/s² Shaker stroke: 1 inch / 25.4 mm Axial resonance frequency: approx. 2200 Hz / approx. 2.2 kHz Armature effective weight: 45 lb / approx. 20.4 kg Driver Coil: 200 A Sine 140 A Random Air-cooled and vibration-isolated system. Power Amplifier Manufacturer: UNHOLTZ-DICKIE Corporation Type: SALL50F Power Amplifier Serial Number: 4414 Power Module: PML-50-S Master Controller: MCLL50 Supply voltage: 400 V / 3 Phase / 50 Hz Power consumption: 41 kVA / 60 A Blower: 15 kVA / 22 A Maximum Driver Currents: 440 A RMS OUT SINE 300 A RMS OUT RANDOM Forced air cooling. Control System UNHOLTZ-DICKIE VWIN II DSP Vibration Control System including industrial PC / monitor as shown in the pictures Control Console: MA117SA-560 Serial Number: 1838 Charge Amplifier: Type 122P Serial Number: 8963 Supported test types: Random Vibration Sine Vibration Resonance Dwell Classical Shock Pulse SRS Shock & Analysis Sine-on-Random Random-on-Random Gunfire Interfaces: TCP/IP RS232 Ethernet USB HS-Simulators Climate Chamber Manufacturer: HS-Simulators Horstmann GmbH Type: HS 520 K 60 V Temperature range: -60 °C to +180 °C Electrical data: 380 V 17 A 10 kW Refrigerant: R13 R502 Features: Combined climate and vibration testing Complete electrodynamic testing system Iedjy S S Eiepfx Aqujau DSP-based real-time control Forced air cooling system Completely wired testing system Original documentation available: Operating Manual Maintenance Manual System Specifications System Diagrams Performance Curves Dimensions / Weight Amplifier: approx. 1000 x 537 x 825 mm Climate chamber: approx. 1200 x 1800 x 2000 mm Total weight estimated: approx. 2500 – 4000 kg Transportation only by a suitable heavy-duty transport company. Technical data partially estimated. Specifications may vary. Condition Used system from industrial application. Optical condition see pictures. Functionality not fully tested. Inspection possible and desired upon agreement. Scope of delivery UNHOLTZ-DICKIE shaker model 560 SALL50F power amplifier Control console / control system VWIN II controller system Charge amplifier HS-Simulators climate chamber HS 520 K 60 V Industrial PC / monitor as shown in the pictures Documentation and accessories as shown in the pictures Loading possible upon agreement. Commercial sale without warranty. Errors and prior sales excepted.

Condition: excellent (used), LDS / CTS Vibration Testing System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker system, an LDS SPA30KCE power amplifier, an IMV K2+ vibration controller, and a CTS climate chamber. Suitable for combined vibration and climate testing in the automotive, aerospace, electronics testing, research & development, material testing, and industrial quality assurance fields. The blue hall crane / portal crane visible in the pictures is not included in the scope of supply. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V850-440 LPT 750C Air-cooled electrodynamic vibrator. Armature diameter: 440 mm Frequency range: DC – 3000 Hz Resonant frequency: approx. 2200 Hz Sine force: approx. 22.2 kN peak Random force: approx. 22.2 kN RMS Shock force: approx. 66.7 kN peak Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal load capacity: approx. 350 kg Compressed air supply required: Load support: approx. 5.5 bar Air isolation: approx. 6.9 bar Shaker weight: approx. 1,300 kg Power Amplifier Manufacturer: LDS Type: SPA30KCE Class-D high-performance switching amplifier. Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. input power: 38.14 kVA Max. output power: 21.0 kW Output voltage: 100 V RMS Amplifier weight: approx. 550 kg Controller IMV K2+ Vibration Control System Multi-channel vibration controller including Dell Precision PC system. Functions: Sine Resonance dwell Limit control Random Sine-on-random PSD limit control Shock Scheduler System monitor CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: CV-70/1100-5 Year of manufacture: 10/2019 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Rated voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Refrigerant: R452A: 6.8 kg R23: 2.1 kg Equipment Combined climate and vibration testing Slip table / Fixturing table included Completely wired testing system Service and maintenance documentation available Slip table: Mounting area: approx. 760 x 850 mm Threaded insert spacing: approx. 100 mm Dimensions / Weight Large industrial system / heavy-duty system. Total system weight: approx. 6,000 – 7,000 kg Iajdpfxsy Sy Npe Aquou Transport exclusively via a suitable heavy-duty transport company. Dimensions, weights and technical data are partially estimated or not completely known. Condition Used industrial system from industrial use. Optical condition, see pictures. Inspection and testing on site possible by arrangement. Scope of supply LDS V850-440 LPT 750C shaker system LDS SPA30KCE power amplifier IMV K2+ vibration controller Dell Precision PC system CTS climate chamber CV-70/1100-5 Slip table / Fixturing table Accessories and documentation as shown in the pictures Not included in the scope of supply: Blue hall crane / portal crane. Loading possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Condition: used, ETS MPA102/L620M Shaker Vibration Testing & Horstmann HS 220 Climate Test Chamber System Vibration Testing System: ETS MPA102/L620M Sine Force: 600 kgf Random Force: 600 kgf Shock Force (6 ms, half sine): 1,200 kgf Max. Sine Velocity: 2 m/s Max. Sine Acceleration: 981 m/s² Armature Diameter: 200 mm Iaodey Sl Uqopfx Aquju First Resonance Frequency: 3,300 Hz Dimensions: 943 x 633 x 770 mm Shaker Weight: 730 kg Amplifier Unit: 6 kVA Blower Unit: HP-2 / 4 kW Climate Chamber: Horstmann HS220 Test Chamber Volume: 220 liters Test Chamber Dimensions: 600 x 600 x 600 mm (H x W x D) Temperature Range: -40 to +180 °C Cooling Rate: 2 K/min 3 K/min Heating Rate: 3 K/min 3 K/min Electrical Connection: 400V, 3/N, 50 Hz / 5 kW External Dimensions: 1,630 x 1,700 x 1,200 mm (H x W x D) Used item as shown in the pictures. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please inquire for shipping costs outside Germany). The given shipping costs apply to shipping within Germany. Sale only to commercial customers. No warranty or guarantee. Deviations from the technical data as well as errors in the article description are possible and subject to change.