Used Deep Boring Machine for sale (65,036)

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed Itsdpjlhwr Refx Ah Neb - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm Itodpoqa Txqefx Ah Njb spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: excellent (used), Drilling machine for turned components Triade Number of drilling units: 3 Iodpfx Asyabz Ieh Njtb Drilling depth: 100 mm per side

Condition: used, Year of construction: 1974, 414312067 voltage 380 V frequency 50 Hz rated capacity 13 kVA Iodpox U A T Nsfx Ah Njtb

Condition: used, Year of construction: 1990, table: 900-1500 mm Isdpjx E Dt Eefx Ah Nstb digital ja weight 5 t

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm z-travel 500 mm Control Heidenhain total power requirement 16 kW dimensions of the machine ca. 5 x 4,2 m Itedpfxjuxfz Ae Ah Nob

Condition: good (used), Year of construction: 1977, workpiece weight 279 KG length ca. von Bett bis Lynette mm Isdpfx Ajrfd U Reh Nstb 189 € . max durchlass 369 mm

Condition: used, Year of construction: 1988, control Heidenhain 355 tool adaptor SK50 weight of the machine ca. 8 t Ijdpfxjf Tdvbs Ah Njtb +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), functionality: fully functional, Drilling machines for turned parts TRIADE FR-3 V-V Itedpfxjx Uyfpe Ah Neb

Condition: used, No. 3254 Hinge-hole boring machine / hinge-hole drilling machine Hettich Blue Max Mini Used Hinge-hole boring machine / hinge-hole drilling machine Hettich Blue Max Mini together with a hole-line drilling machine Technical data Hettich Blue Max Mini: Drill motor 400 V, 1.1 kW, 2800 rpm Pneumatic feed Technical data hole-line drilling machine: 1.1 kW, 2800 rpm With foot pedal Transport dimensions approx. 1200 x 800 x 900 mm LWH Weight approx. 100 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Ijdpfx Ahjx T Rzfj Notb Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 1989, functionality: fully functional, Stegherr Type FD, a boring machine for dowel holes in window frames — designed for precise drilling of dowel holes in wooden window profiles. Itsdsya Alzjpfx Ah Njb Professional FP machine for milling, drilling, and processing of wooden frames, windows, and doors. Very robust German quality Suitable for precision work (corner joints, dowel holes, etc.) Convenient stops and adjustment options Fully operational. Sturdy metal housing Ideal for joinery workshops or woodworkers seeking accurate results. In used condition.

Condition: excellent (used), functionality: fully functional, Drilling machines for turned parts TRIADE FR3 Itedpex Ty Uhofx Ah Nsb

Condition: excellent (used), functionality: fully functional, Drilling machines for turned components Genini TR4 Isdpfx Ahex Tuvye Njtb

Condition: excellent (used), Drilling machines for turned parts TRIADE FR5 Itjdsx Tupyepfx Ah Nsb

Condition: excellent (used), Drilling machines for turned parts TRIADE FR6SC Itodox Tuimepfx Ah Neb

Condition: excellent (used), Drilling machines for turned parts TRIADE FR6S Itsdpfsx Tt Emox Ah Neb

Condition: excellent (used), Drilling machines for turned parts TRIADE FIR-6 Itodex Ttnbopfx Ah Njb

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Itedpfxsx Tp Ahs Ah Nob Type: UTB Year: 2005

Condition: good (used), Year of construction: 2008, CNC Deep Hole Drilling Center Machine type: Degen UTB800/G Control: Heidenhain TNC310 Year of manufacture: 2008 TECHNICAL DATA: Travel distances: X-axis: 630 mm Y-axis: 400 mm Z-axis: 800 mm W-axis: 600 mm Feed rate: 6,000 mm/min Swivel range: Z: +/- 10° Ijdpfxjwxaf Re Ah Notb Table size: 1,100 x 650 mm Max. table load: 2,000 kg Tool holder: HSK 63 Max. speed: 4,000 rpm Drive power: 7.5 / 5.5 kW Drilling diameter: 4–25 mm Accessories: Electronic handwheel High-pressure pumps Internal cooling (IKZ): 0–90 bar Coolant tank: 600 l Paper band filter

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Taper:HSK-A40 Itjdpsx E Ingsfx Ah Neb Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller

Year of construction: 2001, condition: like new (used), Retrofitted: 2024 Numerical control: HEIDENHAIN TNC426 Ijdpfxeugbrqe Ah Netb Technical features Dimensions Table dimensions: 6000 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis Longitudinal traverse X: 5040 mmVertical traverse Y: 1000 mmTransversal traverse Z: 1500 mm Milling head Head type: Fixed frontalTool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872-BSpeed range: 60 - 3000 rpmSpindle power: 22/30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 10000 mm/min Weight and dimensions Maximum weight on table: No restrictionsMachine weight approx.: 43000 kgMachine dimensions approx.: 11560 x 6150 x 3538 mm Accesories Guarding (Option: pendular guarding)Automatic tool changer: AH40Chip conveyor: 2 longitudinalElectronic handwheel: HR-410External coolant Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features

Condition: good (used), used boring machine Brand: Juaristi Model: MDR 75 Weight: 5600kg Motor power: 10KW 2-axis digital FAGOR. Shank diameter: 75mm Longitudinal course (X axis): 1,150mm Vertical course (Y axis): 700mm Itjdpfx Ajh Ryc Hjh Neb Column transversal course (Axis W): 800mm Cane exit course (Z axis): 500mm Table surface: 900x700mm Speeds: 22-1055rpm Number of advances: 9 of 0.04-3 mm/rev.

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. Iedpfx Aeizxbijh Njtb - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, CNC T TYPE BORING MACHINE CASTEL RED X TRAVEL 4000MM Y TRAVEL 2000MM Z TRAVEL 700MM(SPINDLE) W TRAVEL 2500MM(COLUMN) ROTERY TABLE 1800X 1600MM (HYDROSTATIC) TABLE INDEXING 0.001° Iedpfx Aox U Dfyoh Nstb TABLE LOADIONG CAPACITY 12TON CNC SELCA1200

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Itodpfsx Sw Ezjx Ah Neb Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.