Deephole boring machine

IMSA MF 1000 BB

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,000 mm, overall weight: 20,000 kg, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 380 mm, drill diameter: 40 mm, rotational speed (max.): 4,200 rpm, table length: 1,000 mm, table width: 800 mm, table load: 9,500 kg, number of spindles: 2, feed length W-axis: 500 mm, Equipment: rotational speed infinitely variable, IMSA DEEP HOLE DRILLING MACHINE, MODEL MF 1000 BB TRAVEL: LONGITUDINAL AXIS 1250 TRANSVERSE AXIS (MILLING SPINDLE) 380 mm TRANSVERSE TRAVEL OF THE HEAD 500 mm VERTICAL TRAVEL 1000 mm ROTARY TABLE DIMENSIONS 1000x800 TOTAL MACHINE WEIGHT 20,000 KG MAXIMUM WEIGHT OF ROTATING WORKPIECE 4000 KG MAXIMUM WEIGHT OF STATIONARY WORKPIECE 9000 KG TILTING ROTARY TABLE Chsdpfx Agjyft Hajred TOOL CHANGER, 20 POSITIONS MAXIMUM DRILLING DEPTH 1000 mm MAXIMUM DIAMETER OF DEEP HOLE DRILLING 40 mm MAXIMUM SPINDLE SPEED FOR DRILLING 4200 RPM MILLING SPINDLE DIMENSION ISO 40 MAXIMUM SPINDLE SPEED FOR DRILLING 4000 RPM MAXIMUM FEED RATE WITH MILLING SPINDLE M 40 MAXIMUM MILLING CUTTER DIAMETER 65 mm SPINDLE TRAVEL 380 mm

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 350 kW (475.87 HP), type of input current: three-phase, overall weight: 1,930 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,600 mm, total height: 2,000 mm, AMMONIA CHILLER GEA GRASSO 350 KW Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Csdpfxsim R A Ij Agrehd Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2002, condition: ready for operation (used), - USED - DRILLING-MILLING MACHINE LONGITUDINAL TRAVEL: 1650 mm TRANSVERSAL TRAVEL: 1000 mm VERTICAL TRAVEL: 1000 mm RAPID FEEDS L-T-V: 10 m/min W-AXIS: 500 mm MIN DRILLING DIAMETER: 5 mm MAX DRILLING DIAMETER: 40 mm MAX DRILLING DEPTH: 1000 mm SPINDLE: 1 - 4.200 rpm; 10 kW Codpfswla H Iex Agrohd TABLE SIZE: 1000 x 800 mm MAX ADMITTED LOAD: 4000 Kg CONTROL UNIT: SELCA S4040D ACCESSORIES: PAPER FILTER NOTE: 10-POSITIONING TOOL MAGAZINE ISO40

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm workpiece length 1000 mm Chedpfx Agowwl I Iered total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago

Condition: used, Year of construction: 2017, functionality: fully functional, center height: 180 mm, total width: 1,650 mm, total length: 4,900 mm, total height: 1,800 mm, overall weight: 3,900 kg, grinding length 1500 mm Codpfx Agswm Rqgorehd centre height 180 mm weight of the machine ca. 3,9 t dimensions of the machine ca. L: 4900 x 1650x 1800 m

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis Chjdpfx Asv A Uw Dogrod 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Chedozkbr Tspfx Agred Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Condition: used, Year of construction: 2018, 3D printer Csdovtftqspfx Agrehd Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece. Chodpfxeuz If Ns Agrjd

Condition: used, Year of construction: 2002, Suitable for automatic grinding of all types of tools. Accessories: Total enclosure Knoll E53319 bandfilter system Numroto 3D Simulation Software, Numroto 3D Collision Detection Software, Numroto Form Cutter Software, Pallet loader CNC handwheel Control cabinet cooler, automatic tailstock automatic central lubrication Glass scales on the X, Y, Z linear axes Measuring probe Hydraulic workpiece clamping Oil collection tray 2 loading pallets, 1 grinding wheel holder. X axis travel: 800 mm Y axis travel: 270 mm Chodpsyv Hv Refx Agrod Z-axis travel: 660 mm B axis travel: 400 ° Rapid traverse: 30/15/30 m/min Workpiece mount: ISO 50 Tool holder cone: ISO 50 Grinding spindle drive power: 12 kW Grinding spindle speed stepless: max. 9000 rpm, Grinding wheel diameter: max 203mm Connected load approx.: (400V/50Hz) Dimensions L x W x H: 1900 x 2300 x 2300 mm Weight approx: 5400 kg Colour: Grey / yellow