Used Deep Hole for sale (5,839)

Condition: good (used), Year of construction: 2004, TBT ML 200-2-800 deep hole drilling machine TECHNICAL DATA Type: ML 200-2-800 Year of construction: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Hsdjvcbg Sopfx Afienu Drilling slide stroke: 800 mm Drilling range: 1 - 10 mm Process: Single-lip drill Drilling depth: Immersion spindle: 110 mm Seal housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 Voltage: 240 / 350 / 350 V Frequency: 100 - 800 Hz Weight: Approx. 2.6 T We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, table length: 1,050 mm, table width: 1,050 mm, center height: 1,040 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Drilling depth: 1,200 mm Spindle speed (min): 50 rpm Spindle speed (max): 3,000 rpm Feed rate (Row 1): 18 – 160 mm/min Feed rate (Row 2): 35 – 320 mm/min Rapid traverse speed: 3.5 m/min Rated motor speed: 1,400 rpm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm MACHINE DETAILS Dimensions (L x W x H): 6,500 x 3,500 x 2,900 mm Electrical data Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW Hnsdsxm S Idepfx Afiju EQUIPMENT 3-axis Heidenhain digital readout Coolant system

Condition: excellent (used), Drilling capacity -16mm MK2 Spindle taper Hnsdpfx Asq Dlznjfiju Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Misc. Accessories Marcels Maschinen AG

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 106840-11, overall weight: 35,000 kg, The drilling process of the deep hole drilling machine uses single-lip drilling. The BW250-T is a deep hole drilling and milling center with two separate spindles for deep hole drilling and milling operations. The machining units are equipped with an additional common travel axis, allowing even smaller workpieces to be machined from four sides on the clamping table without resetting. Drilling and Milling Unit Information: - Number of spindles: 1 drilling spindle and 1 milling spindle - Spindle speed infinitely variable: 0 - 5000 rpm - Spindle drive power: 17 kW at 100% duty cycle S1 operation - Torque: 260 Nm at 100% S1 operation - Max. drilling depth: 1500 mm (in one pass without repositioning) - Drilling diameter: 4 - 40 mm based on ST 60 Travel Paths: - X-axis travel: 2500 mm - Y-axis travel: 1500 mm - Z-axis travel: 850 mm - V-axis travel: 1000 mm Feed rates: - X-axis speed: 10000 mm/min - Y-axis speed: 10000 mm/min - Z-axis speed: 6000 mm/min Swivel Axis Setup for Drilling and Milling Unit: - The drilling and milling unit has a horizontal swivel range of -25° / +15° - 3x steady rests Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 2400 liters - 1x hinge belt chip conveyor - 1x hydraulic power unit and pneumatic unit/equipment - 1x central lubrication - 1x low-pressure pump: Pump output: 100 l/min Hnsdpfsxmh Erjx Afiju Pump drive: 5.5 kW - 1x compact band filter: Filter output: 175 l/min For operations in: steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x oil mist extraction, Extraction capacity: 2400 m³/h Tool magazine for conventional tools consisting of: - Tool change magazine with intermediate gripper - Tool holder HSK 63 - Max. permitted tool diameter: 127 mm - Max. permitted tool length: 400 mm - Tool storage spaces: 40 Clamping table with X-axis and NC rotary table: - Length/width: 1600 x 2000 mm - Useful load (centered): 15 t - Swing diameter for workpieces: 2800 mm Measuring Equipment - Tool breakage monitoring and length measurement of the BCM tools with automatic compensation in the control system Electrical Equipment Information: - 1x CNC control TNC 640 Failsafe Heidenhain - 1x drilling process monitoring - 1x remote maintenance - 1x dynamic collision monitoring - 1x handheld control device Connection Data: - Operating voltage: 3AC 400V ±10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 65 kW

Condition: ready for operation (used), empty load weight: 6,000 kg, total width: 2,350 mm, total height: 2,450 mm, Type: FCN 540 gundrilling, high precision deep hole drilling movement of drillinghead: 0 600 mm movement of table (X-movement): 0 800 mm max drillingdepth: 800 mm Y-travel: 600 mm Z-travel: 450 mm table: 1100 x 600 mm Heidenhain control including Filtra high pressure cooling through spindle Hedpjxgv I Isfx Afisnu including tools total power: 16 kW Max drilling dia: 4-20 mm Speed: 0 > 12 000 rpm Power on drillingspindle: 3,7 kW Total length: 3800 mm Numbre of drillingheads: 1x

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, drilling depth: 1,000 mm, feed length X-axis: 900 mm, feed length Y-axis: 400 mm, feed length Z-axis: 300 mm, total length: 3,600 mm, total width: 3,300 mm, total height: 2,200 mm, workpiece weight (max.): 6,000 kg, overall weight: 6,500 kg, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 6,000 rpm, CNC HEIDENHAIN 530 ROTARY TABLE: Work surface: 800 x 900 mm Fixing T-slots (quantity x width): 4 x 18 mm Maximum load allowed (rotating piece): 4.500 kg Maximum load allowed (fixed piece): 6.000 kg AXIS TRAVELS – WORK AREA: Transversal – deep V axis drilling: 1.000 mm Longitudinal X axis: 900 mm Vertical Y axis: 400 mm Hsdowamdiepfx Afienu Auto piece approach Z axis: 300 mm ADVANCEMENTS: Rapid X, Y, Z axes: mm/min 10.000 WORKING CHARACTERISTICS IN DRILLING WITH "CANNON" TIPS: Maximum drilling depth: 1.000 mm Deep drilling spindle rotation speed: 6.000 rpm Drilling section, from solid – minimum drill Ø: 4 mm Drilling section, from solid – maximum drill Ø: 25 mm WORKING CHARACTERISTICS OF THE MILLING SPINDLE: Maximum rotation speed: 6.000 rpm Maximum thread (on C40 type steel): M 20 Maximum quill excursion (Z axis): 300 mm DIMENSIONS: Overall dimensions: 3.300 x 3.600 mm Height: 2.200 mm Total weight: 6.500 kg Machine complete with: • Instruction manuals and CE declaration

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided Hnodpfjvca Rcjx Afieu

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 35114, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, feed length Z-axis: 600 mm, spindle speed (max.): 4,000 rpm, drill diameter: 16 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Feed travel X-axis: 600 mm Feed travel Y-axis: 300 mm Feed travel Z-axis: 600 mm Feed travel W-axis: 650 mm Spindle speed (max.): 4,000 rpm Drilling diameter, twist drill: max. 16 mm Single-lip drill: 4 to 16 mm Tapping: max. M12 Hnjdpfx Ajxm S Hyefiju Table length: 1,000 mm Table width: 680 mm MACHINE DETAILS Control model: HEIDENHAIN TNC 124 DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,500 x 1,500 x 2,100 mm Total weight: 2,000 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Hnjdpjwcldasfx Afieu Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

Condition: good (used), Year of construction: 1979, TBT T30-4-750/1000 -drilling diameter ~30 -drilling depth 750/extension ~1000 -Tank -Pumps -loading equipment -Tailstock Hsdpfx Ajd Ri H Eofisnu

Condition: excellent (used), 10 x deep hole drills make Botek 3 pieces 6,5 x 320 mm 2 pieces 10,2 x 190 mm 3 pieces 10,4 x 250 mm 1 piece 1 x 11 x 350 mm Hodpfx Afshl Awdeijnu 1 piece 11 x 270 mm Weight 1,5 kg

Condition: good (used), Year of construction: 2009, operating hours: 20,709 h, functionality: fully functional, machine/vehicle number: 106516-11, drilling depth: 1,200 mm, overall weight: 7,500 kg, For sale: A very well-equipped deep hole drilling machine from TBT, including various accessories. Drilling specifications: - Spindle 1: 5–18 mm; Spindle 2: 1–4 mm - Drilling depth: approx. 1200 mm with Ø8 mm using 3 steadies - Number of spindles: 2 - Spindle drive: Spindle 1: 1 x 4 kW; Spindle 2: 1 x 1.2 kW - Spindle speed: Spindle 1: 600–6000 rpm; Spindle 2: 2000–24000 rpm - Rapid traverse: 15,000 mm/min - Saddle stroke (nominal): 1800 mm - Coolant: Deep hole drilling oil - Tank capacity: 1,100 liters Hnsdpfx Aexgnhaofisu - Operating voltage: 3AC 400V, 50Hz (Total connected load: 25 kW) Condition: Good, appropriate for its age Accessories: Includes drip tray and various drills On-site inspection is recommended!

Year of construction: 2000, condition: refurbished (used), LOCH Deep hole drilling machine TB 1-4/E-600/2 (reconditioned used machine) Working depth: max. 600 mm Working diameter: solid drilling 4 - 25 mm diameter in steel Number of spindles: 2 deep drilling spindles maintenance-free with lifetime grease lubrication Drilling spindle receptacle: Short taper according to DIN 55027, size 5 Center height: 250 mm Center distance: 203.2 mm Drilling system: single lip drilling Main drive: 2 x 5.5 kW drive power per spindle, steplessly adjustable by frequency regulated three-phase motor, power constant for the entire speed range. Hnedpsikqrfsfx Afisu Speed range: 1000 - 6000 min-1 Feed rate: Through infinitely variable three-phase servo drive via recirculating ball screw and backlash-free preloaded nut. Feed range: 0 - 300 mm/min Extended feed range on request possible up to max. 6000 mm/min Rapid traverse: 6000 mm/min back and forth Coolant supply: Internal coolant supply through drill spindle via carbide mechanical seal. Spindle slide: Stable construction with mounted spindle spindle blocks in special construction, whereby the spindle bearings are provided with lifetime lubrication and are maintenance-free. Guide system: Machine bed with screwed-on, hardened and ground linear guides. Spindle slide moves via circulating rolling elements, feed vibration-free and without stick-slip effect. Drill bush support: Firmly connected to the substructure and with removable upper part for easy and quick change of drill bushings or the coolant supply units. Machine base: Strongly dimensioned welded construction, stress-relieved annealed. Clamping table: Table plate in special cast design firmly mounted on the substructure with T-slots, whereby the center groove is aligned with the drilling axis and serves as a guide groove for the accommodation of clamping elements. Control: SIEMENS Sinumerik 840 D (Retrofit) Workflow: Individual functions for setting up the machine via pushbutton control. Semi-automatic for manual loading via program start. Machine monitoring: With display of spindle speed, feed rate, drilling depth and coolant pressure. Protective device: The tool area of the machine is protected by a sliding door, which is electrically linked to the control, against unintentional and unauthorized opening during during the working process. Electrical equipment: All electric motors according to IEC standard. Separate electrical cabinet with all electrical necessary for the operation of the plant safety and control equipment. Machine operation from control panel conveniently located in the working area. Machine can be inspected and tested at any time if interested. MORE INFO ON REQUEST

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 106729-11, total length: 8,880 mm, total width: 6,360 mm, total height: 4,700 mm, overall weight: 34,000 kg, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 0 - 8000 rpm - Spindle drive power: 17 kW at 100% ED S1 operation / 20 kW S6 operation - Maximum drilling depth: 1800 mm / 2100 mm with pilot drilling without drill bush holder - Minimum/maximum drilling diameter: 4 - 40 mm based on ST 60 - Maximum thread cutting: M30 - Milling material removal rate: 475 cc/min Traverse Axes: - X-axis travel: 2000 mm - Y-axis travel: 1000 mm - Z-axis travel: 2200 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil, type HSD 400 - Total capacity: 2400 liters - 1x hinged belt chip conveyor - 1x screw conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x oil mist extraction unit - 1x central lubrication: Central lubrication unit for oil impulse lubrication - 1x submersible pump: Pump flow rate: 200 l/min Pump drive: 1.1 kW - 1x submersible pump: Pump flow rate: 500 l/min Pump drive: 2.2 kW - 1x submersible pump: Pump flow rate: 100 l/min Pump drive: 5.5 kW - 1x compact band filter: Filtering capacity: 175 l/min For machining steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x water cooler: Cooling capacity: 30 kW Milling and Drilling Spindle Unit: - Spindle housing with AC motor spindle - The position of the machining unit on the Y-column enables true 4-side machining at table center - Swivel axis device, swivel range: -30°/+15° 2x manual steady rests: - On guide rails with manual positioning - Can be swiveled away and manually opened and closed Drill bush holder: - Precise changeover between deep hole drilling with drill bush and conventional machining, or deep hole drilling with pilot drilling - Automatic drill bush holder change via standard tool magazine Pickup Tool Magazine: - For standard tools - 36 tool storage positions - Max. tool holder: HSK 63 / Max. permitted tool diameter: 100 mm / Max. permitted tool length: 300 mm - Tool transfer from magazine to spindle via NC-controlled spindle positioning - 1 slot for drill bush holder Clamping Table with X-Axis and NC Rotary Table: - Length/width: 1250x1250 mm - 360° rotary workpiece table - Load capacity (centered): 10 t - Workpiece swing diameter: 2000 mm Hsdew Htirepfx Afionu Electrical Equipment Information: - 1x CNC control Sinumerik 840D SL (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 40 kW

Condition: excellent (used), Year of construction: 2009, operating hours: 20,709 h, 2 spindles Hnodpfx Afeww Ihqsieu Drilling data: Spindle 1 (4 kW) 5-18 mm Spindle 2 (1.2 kW) 1-4 mm Spindle speed: Spindle 1: 600 - 6,000 rpm Spindle 2: 2,000 - 24,000 rpm Drilling depth approx. 1,200 mm (with Ø8mm and use of 3 steadies) Rapid traverse 15,000 mm/min Carriage stroke 1,800 mm Machine weight: 7,500 kg

Condition: good (used), -Drill through fair 5-30 mm - depth 750 ~ 900 mm - conversion to customer specification Hnodpfx Ae Dcz Defieu

Condition: excellent (used), Heidenrich & Harbeck B3 SB Deep Hole Borer Hnsdpfjw U Uhkjx Afisu 10,000mm Capacity, 4 off Steady Rests 2 off Boring Bar Dampers Swarf Tray & Baskets Tooling, Counter Rotation

Condition: good (used), MEWAG - IXION TL 500 Deep Hole Drilling Machine - Drilling depth approx. 500 mm - Table size 800 x 450 mm - Support/drilling table rotatable and angle adjustable from 0 to 360 degrees - Manual drilling stroke - Drill chuck - Various deep hole drills - Connection cable Hodpfxowm Hclj Afisnu Dimensions: L x W x H 1.6 x 0.8 x 1.6 meters / Weight 1300 kg Subject to errors / mistakes

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 00-1646/1, drilling depth: 700 mm, workpiece weight (max.): 10,000 kg, travel distance X-axis: 1,670 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, table load: 10,000 kg, travel distance W-axis: 440 mm, Equipment: chip conveyor, • Manufacturer Buck Maschinenbau GmbH !!! Special price 95,000 !!! • Machine number 00-1646/1 • Working area (mm): X 1,600, Y 1,200, Z 1,600 • W-axis 500 mm, B-axis, A-axis swivels 19° • Full machine enclosure • Chip conveyor and high-pressure coolant system • Tool holder SK50 Hjdpfx Afou Hzqcsionu • Heidenhain TNC 430 control • Table load capacity 10 tons workpiece weight • Spindle speed 4,000 RPM • Rapid traverse 20 m per minute • Tool changer for 20 tools • Machine can be inspected under power at any time by appointment

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, rotational speed (max.): 5,600 rpm, TECHNICAL DETAILS Drilling Data Drilling depth: 1,500 mm Axis Data X-axis travel: 3,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm X-axis feed rate: 15 m/min Y-axis feed rate: 15 m/min Z-axis feed rate: 15 m/min Feed force: 30,000 N Rapid traverse speed: 15 m/min Spindle Data Speed: min. 300 rpm Speed: max. 5,600 rpm Hsdpfxjw Izr As Afionu Table Data Clamping surface: 2,000 mm x 1,250 mm Number of T-slots: 7 Table load capacity: 12,000 kg Tool holder: SK50 MACHINE DETAILS Control: TNC430 Dimensions & Weight Dimensions (L x W x H): 8,400 x 8,300 x 4,500 mm Total weight: 30,000 kg EQUIPMENT Stepless speed adjustment Drill bit grinding machine Note: Dismantling and loading can be offered for €8,000.

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Hedpfowyup Tjx Afisnu Height: 3400mm Weight: 6500kg

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter 5-30 mm - Drilling depth 750 mm - Filter - Pump Hnedpsxzz Hefx Afiju

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min Hnedpsw E H E Rsfx Afieu for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: ready for operation (used), Drilling diameter 5 ~ 25 mm Drilling depth 1000 mm Hnodedgpltepfx Afieu Headstock Tank pump Filter

Condition: reconditioned (used), -Drilling diameter 5~25 mm -Drilling depth 1500 mm -Tailstock -Tank -pump -Filter Hodehuil Ropfx Afienu