Used Deep Boring Machine for sale (92,189)

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Hodpfx Afelhwr Rsijnu Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Dowel hole drilling device: no Drilling depth: 145 mm Hedpow H Ip Tsfx Afisnu Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Machine length: 1280 mm Machine width: 960 mm Weight: 200 kg

Condition: good (used), MEWAG - IXION TL 500 Deep Hole Drilling Machine - Drilling depth approx. 500 mm - Table size 800 x 450 mm - Support/drilling table rotatable and angle adjustable from 0 to 360 degrees - Manual drilling stroke - Drill chuck Hodpfx Afswm Hclsisnu - Various deep hole drills - Connection cable Dimensions: L x W x H 1.6 x 0.8 x 1.6 meters / Weight 1300 kg Subject to errors / mistakes

Condition: used, URANIA DSK Maximum paper size: 80 × 112 cm Minimum paper size: 30 × 42 cm Hjdsw R Eqbopfx Afionu • Frame opening (normal): 78.5 × 108.5

Year of construction: 1987, condition: ready for operation (used), A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available. Hnsdpottv Uajfx Afisu

Year of construction: 2007, condition: ready for operation (used), Main Drive Spindle speed range 2800 RPM This GANNOMAT Index Logic T70 was manufactured in 2007. A robust wood boring machine featuring a 2.5 HP motor and 21 spindles, it offers a spindle speed of 2800 RPM. The table size is 34.33" x 19.3", and it can handle a maximum drilling depth of 75 mm. If you are looking to get high quality boring capabilities consider the GANNOMAT Index Logic T70 machine we have for tact us for more information. Application Types Boring & Drilling (Wood) Hedpfx Afew Hhz Asisnu

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t. Hsdou T Ty Hjpfx Afisnu

Condition: new, Year of construction: 2022, Dowel hole drilling device: no Drilling depth: 150 mm oblong hole length: 180 mm Height adjustment travel: 145 mm Motor power: 1,5kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg Hnodsgq Un Aopfx Afisu

Condition: excellent (used), Year of construction: 2018, Heidenhain iTNC 640 CNC control Table dimensions: 1800 x 2200 mm Max. workpiece weight: 25,000 kg X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,600 mm Spindle/cone diameter: 130 mm Speed range: 3,000 RPM Spindle power: 46 kW Max. torque at 100% duty cycle: 1,000 Nm Machine weight: 38,000 kg Power-on hours: 16,631 Spindle hours: 4,430 Accessories: – Controlled B-axis – 40-position tool changer / chain-type magazine – Belt filter system with high-pressure pump – Chip conveyor – Heidenhain TS 460 workpiece probe – Automatic milling head type HUI 50 – Movable operator cabin Yp = 1,600 mm, Zp = 600 mm – Centralized lubrication system – Pfannenberg oil cooler Hnsdpfx Aow Hbnvofisu – Documentation

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Unused Worktable rotatable ±60° on both sides Easy operation via single-lever control for fast and precise work Drilling head mounted on double guides Clamping stops allow simple and quick adjustment of the drilling head travel Height adjustment of the drilling head via handwheel with digital display Standard dowel drilling unit with grid positions 16 / 22 / 25 / 32 Hnsdpew E Tz Esfx Afisu Manual eccentric clamp as standard Robust steel/cast-iron construction Powerful motor Technical data: Drilling width: 240 mm Max. drilling depth at 90°: 180 mm Worktable swivel: ±60° Worktable length: 565 mm Worktable width: 315 mm Drilling head height adjustment: 160 mm Tool clamping diameter: 0 - 20 mm Spindle speed: 3000 rpm Extraction port diameter: 90 mm Dimensions and weight Length (product): approx. 1290 mm Width/depth (product): approx. 980 mm Height (product): approx. 1270 mm Weight (net): approx. 260 kg Electrical data Connection voltage: 400 V Network frequency: 50 Hz Output power: 2.2 kW Supplied with manual eccentric clamp Availability: short notice Location: Saxony-Anhalt

Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible. Hsdpewih Arofx Afionu

Condition: used, Year of construction: 1999, Technical details: spindle diameter: 125 mm x-travel: 3000 mm y-travel: 1600 mm z-axis: 1500 mm w-axis: 600 mm table surface area: 1200 x 1500 mm table load: 6 t spindle taper ISO: 50 spindle turning speed range: 5 - 2500 U/min spindle drive motor: 22 kW total power requirement: 60 kVA weight of the machine ca.: 28 t dimensions of the machine ca.: 7,0 x 5,4 x 4,4 m CNC HEIDENHAIN TNC 430 spindle support bearing automatic toolchanger 60-pockets chip conveyor and coolant attachment Hnjdsvm Aauspfx Afieu measuring probe *

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Hjdpfx Afefbt Husienu Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: as good as new (ex-display), Year of construction: 2022, Dowel hole drilling device: Pitch 16, 22 25, 32 Drilling depth: 150 mm Hnsdpfxsgzlq Es Afieu Slot length: 250 mm Height adjustment range: 145 mm Motor power: 1.5 kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 160 kg

Condition: used, Year of construction: 1988, control Heidenhain 355 tool adaptor SK50 weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Hnedof Tdvbepfx Afiju +++++

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Hnedsv S Diuopfx Afiou Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg

Condition: used, Year of construction: 1995, tool adaptor SK 40 Hsdenl Nq Uspfx Afienu weight of the machine ca. 2,3 t x-travel 800 mm

Condition: used, Number of spindles for row of holes: 15 Drill pitch: 32mm Power consumption: 2.2kW Hnodpfx Afeuix Sajiou Drilling unit: adjustable in depth Fitting drilling head adapter: Hettich drilling pattern Hole line drilling head: 15 drills

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm z-travel 500 mm Control Heidenhain Hsdpfx Afsuxfz Asionu total power requirement 16 kW dimensions of the machine ca. 5 x 4,2 m

Condition: used, Year of construction: 1991, Number of spindles: 9 Drill pitch: 32mm Hnedjq Tcz Rjpfx Afiou Power consumption: 2.2kW

Condition: used, Year of construction: 1990, x-travel 1600 mm ja weight of the machine ca. 13,7 t Hedpfswlvtdsx Afionu

Condition: as good as new (ex-display), Year of construction: 2025, Dowel hole drilling device: Pitch 16, 22, 25, 32 Hjdpov N Tyqsfx Afionu Drilling depth: 180 mm Slot length: 240 mm Height adjustment range: 160 mm Motor power: 2.2 kW Speed: 3000 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 260 kg

Year of construction: 1977, condition: used, workpiece weight 279 KG length ca. von Bett bis Lynette mm Hjdpfx Aerfd U Rsfisnu 189 € . max durchlass 369 mm

Condition: used, Year of construction: 1993, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Hsdowhuu Espfx Afisnu Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.3 / 1.8 kW Speed: 1400 / 2800 rpm Holder clamp: manual Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: used, Year of construction: 1979, spindle diameter 80 mm ja facing slide ja Ja weight of the machine ca. 8,8 t Hnjdpfx Aowhq Dvefiju