Slot boring machine

Panhans 116 H

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening Fjdpfx Afscnw U Denoft

Condition: used, Weinig Powermat 700 planer and moulder with CNC control for four-sided planing and profiling of wood. Available by arrangement from March 2026. Sale of this machine is subject to the sale of the briquetting press (Ref. No. 800055) or the entire planing unit (Ref. No. 100101). Ffedpjxpuufefx Afnjt spindle: 6 spindle 1: Bottom / 7.5 kW / 6,000 rpm spindle 2: Right / 15 kW / 8,000 rpm spindle 3: Left / Common motor with #2 / 8,000 rpm spindle 4: Top / 11 kW / 8,000 rpm spindle 5: Top / 7.5 kW / 8,000 rpm spindle 6: Bottom / 7.5 kW / 8,000 rpm working width: 230 mm working height: 160 mm spindle diameter: 40 mm feed: 40 m/min / 5 kW Planer table length: 1.200 mm Control: Memory Plus

Condition: excellent (used), Motor power 1.2 HP, 400 V, 50 Hz Speed 2800 rpm Drilling table size 650 x 330 mm Cross adjustment 300 mm Depth adjustment 150 mm Height adjustment 170 mm Table height 880 mm Fedpfx Ajvzramjfneft Weight approx. 280 kg

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Features and Technical Specifications: Processing dimensions: - Workpiece thickness: 8–60 mm - Workpiece width: from 70 mm - Edge height: up to 8 mm - Edge thickness (roll material): up to 3 mm Feed: - Speed adjustable from 8 to 14 m/min, stepless adjustment Gluing technology: - Gluing system for granulate - Glue pot positioned above the feed - HOMAG QA 65 N interchangeable glue pot - Designed for processing EVA and PUR adhesives - Quick-change function Units: - Jointing/milling unit Fodpfx Asxz H U Uofnoft - Preheating zone - NC-controlled pressure station - Front and rear end trimming with two motors - Station for flush, radius and bevel processing - Corner copying unit with two motors - Scraper units: profile and flat scraper - Buffing unit Additional and operating equipment: - Integrated spraying unit - Air cushion table for workpiece support - PU pressure rollers - Mechanical entry lock - HOMAG powerTouch control interface - Machine in right-hand configuration - CE compliant Dimensions: approx. 6,060 x 950 x 1,150 mm Weight: approx. 2,200 kg Availability: short-term Location: North Rhine-Westphalia

Condition: used, Year of construction: 2018, machine/vehicle number: Werksüberarbeitungsnummer: WÜA18031207013284, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,300 mm, table length: 840 mm, main saw diameter: 450 mm, power: 7.5 kW (10.20 HP), Equipment: rotational speed infinitely variable, Used machine GM010.0399 F45 Pro Drive Year of manufacture: 2018 Template holder Max. saw blade diameter: 450 mm Motor: 7.5 kW Vario Ffodpfxsw Nii Se Afnot DRW: 3000 mm TPL: 840 mm WGA Digit-L PA 1300 mm CNC Front support roller Air cushion table

Condition: excellent (used), Belt sander LANGZAUNER Type LZG Sanding table dimensions approx.: 2500 x 800 mm Sanding belt dimensions approx.: 6800 x 150 mm Motor power approx. 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of the sanding belt Sanding belt cover on top Light bar for the work area CE Incl. special sanding pad Incl. extraction fan NEW GRAPHITE CLOTH Fedpsuxnyujfx Afneft Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, No. 04493 Combined machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm LW Lower plate extendable Opening width approx. 145 mm Total pressing pressure 40 tons, specific pressing pressure max. 2 kg/cm2 Heating 2x 1,8 kW - Long belt sander 3 kW Table 2600 x 750 mm LW, extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Sliding table saw / veneer saw / edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Extraction for sander and saw 0.55 kW Delivery rate approx. 11 m3/min Push-button control with main and emergency stop switches Machine on trolley Installation footprint according to manufacturer 7.5 m2 Transport dimensions approx. 3900 x 2100 x 1400 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Ffsdpoxl Ha Ssfx Afnet Terms of delivery: ex warehouse

Condition: new, Number of spindles 6 St. Working width 250 mm Working height 150 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Ffodjvnv Ubopfx Afnst weight 4770 kg Dimensions (L/W/H) 4722x1860x1776 mm Vierseitenhobelmaschine Kuper SWT XL-6 in Fenster-Version mit elektronischer Axial- und Radialverstellung der Spindeln. Schwerer Maschinenständer, verwindungsfrei und schwingungsarm. Anzahl der Spindeln: 6 Arbeitsbreite: 250 mm Arbeitshöhe: 150 mm Abrichttischlänge: 2500 mm Spindeldrehzahl: frequenzgeregelt 4.000 - 8.000 U/min Vorschubgeschwindigkeit: 6-24 m/min Ausführliche Beschreibung finden Sie in nebenstehender PDF-Datei! (Technische Angaben laut Hersteller - ohne Gewähr!)

Condition: new, Year of construction: 2023, functionality: fully functional, Equipment features: - Sliding carriage made of anodized aluminium, incl. high-precision guide made of hardened and ground steel - Sliding carriage lock in any position - Saw blade guard with swing-away device - Extension arm with adjustable angle stop with length compensation every 5° and at 22.5° - Mitre fence and eccentric clamp - Belt adjustment for speed change from above (opening in the saw table) - Indicator lights for set saw blade speed - 3-axis programming unit via TFT 15'' touchscreen on Windows basis, incl. 2,500 program slots, 2 USB ports and 1 Ethernet network connector - Scoring unit with electromotive height adjustment and motorized axial pulse adjustment, including digital display for height and width and width - Angle stop with 3 stop riders; 2 riders with digital display, 1 rider analog but coupled to a digital rider also digitally adjustable - Upper control panel incl. automatic star-delta start - Electrics and safety devices according to CE standard Technical data: - Saw blade inclination: 0° to 45 - Table dimensions: 1,030 x 680 mm Fedpfx Afsrrw Ucsneft - Working height: 870 mm - Sliding carriage dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at rip fence: 1,300 mm - Max. Cutting height with 500 mm saw blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm. - Motors: Main saw: 7.5 kW / 10 HP / 50 Hz, scoring saw: 0.55 kW / 0.75 HP - Noise level according to EN 27960: 84.4 - 2565086.3 dB(A) - Extraction nozzle 1 x 120 mm, 1 x 100 mm - Angle fence extendable to 3,400 mm

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3 Ffedjd Rg Dpopfx Afnst