Used Horizontal Boring Machine for sale (66,178)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Bjdpj Ad Acqsfx Aknsww GENERAL Machine type: Tool milling machine Manufacturer: Knuth Model: UFM 2 Year of manufacture: 2008 Serial number: 143516 WORK TABLE Table dimensions: 1,330 x 320 mm Number of T-slots: 5 TRAVEL RANGES Travel range X-axis: approx. 500 mm Travel range Y-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm ELECTRICAL DATA Operating voltage: 400 V Frequency: 50 Hz Connected power: 5.3 kW MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 1,800 mm Height: 2,000 mm Weight: 2,000 kg

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. Bwodpfx Akoxwl Tbenow A video of the machine can be sent via WhatsApp. It can be tested while connected. Very good condition. X 11,500, Y 3,150, Z 2,000, clamping M 100 Includes a support column, 6 pieces of boards with dimensions 6,500 x 1,850 x 400 mm. Rotary table E 20. Heads, etc. This is a complete workstation. Weight approximately 200,000 kg.

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Bwjdpju Dahnjfx Aknow Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel - Heidenhain length measuring systems on X, Y and Z axes - Heidenhein angle measuring device in B-axis (rotary table) - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes - All axles were rescraped Bsdpsu U Hvwsfx Aknoww - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. bank transfer. Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, can be carried out by us on request. We will be happy to submit a separate offer for this. Delivery of the machine to other EU countries is also possible on request.

Condition: ready for operation (used), travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 4,500 mm, SKODA WD 160 A BORING MACHINE Spindle diameter: 160 mm X-axis travel: 7,000 mm Y-axis travel: 4,500 mm Z-axis travel: 1,200 mm B-axis travel (table): 360° W-axis travel (ram): 1,250 mm Rotary table: 2,000 x 2,000 mm - Maximum weight: 20 t - Longitudinal travel: 1,250 mm CNC: Fagor 8055 Electronic handwheel Spindle speed: 275 - 2,570 RPM Tool: ISO 50 2 x 90° square Universal and 90° head Bodpezb H N Tjfx Akneww

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 1,850 mm, Manufacturer: FPT Year: 2007 CNC Control: HEIDENHAIN Bjdpfx Akszznupsneww Axis Travels X-axis: 7,000 mm Y-axis: 1,210 mm Z-axis: 1,850 mm Milling Head / Rotary Axes A-axis: 270° B-axis: -180° / +180° C-axis: 360° The machine is currently installed at our factory in Istanbul, Türkiye and is in working condition. The machine can be inspected under power at our facility. Further technical information, photos and videos can be provided upon request.

Condition: used, Year of construction: 1998, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,200 mm, controller model: MSC 502, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 1,300 mm Z-axis travel: 1,200 mm Number of axes: 4 Spindle speed: 60–6,000 rpm Spindle power: 30–37 kW Spindle mounting: ISO 50 / BT Number of pallets: 2 Pallet size: 1,000 × 1,000 mm Pallet load: max. 3,000 kg Workpiece diameter: max. 2,000 mm Workpiece height: max. 1,550 mm Workpiece weight: max. 3,000 kg Magazine type: Chain magazine Tool positions: 120 MACHINE DETAILS Control system: MSC 502 Dimensions & Weight Machine weight: 35,200 kg Overall dimensions: 5,330 × 7,720 × 3,810 mm Bjdpfx Ao Agfrzsknsww EQUIPMENT Pallet changer High-pressure coolant system Chip conveyor RS-232 interface Tool pre-setter

Condition: used, TOS W100A - Horizontal Boring and Milling Machine The W100A is one of the most successful models from TOS Varnsdorf and represents the latest version of the classic series (H100, H100A, W100, W100A). It is robustly built, technologically versatile, and easy to operate and maintain. Ideal for single and small batch production with high reliability and comparatively low costs. - Classic design with a fixed column - Extendable spindle - Cross-traveling, rotatable work table - Integrated faceplate support in the spindle head - Option to use long drill rods with support from the drill support - Hardened and ground guide rails - Central lubrication - Position indicator The machine is suitable for drilling, milling, facing, and threading, as well as general machining operations on large workpieces. Technical data Spindle head: - Spindle diameter: 100 mm - Spindle connection: ISO 50 - Spindle travel (Z): 900 mm - Spindle center height above the table (Y): 0 - 1120 mm - Distance between faceplate and support bearing: 2800 mm - Faceplate diameter: 600 mm - Centering hole diameter in the table plate: 280 H6 mm - Centering hole depth: 8 mm - Max. facing diameter: 900 mm T-slots: - Faceplate, number/size/pitch: 2 / 20 H12 / 335 mm - Slide, number/size/pitch: 2 / 16 H12 / 150 mm Table: - Table cross travel (X): 1600 mm - Table longitudinal travel (W): 1250 mm - Clamping area: 1250 × 1250 mm - T-slots, number/size/pitch: 9 / 22 mm / 160/80 mm - Centering hole diameter in the table: 180 H6 mm - Centering hole depth in the table: 6 mm - Max. workpiece weight: 3000 kg - Tailstock slide travel: 1000 mm Speed: - Number of spindle speed steps: 23 - Spindle speed range: 7.1 – 1120 rpm - Number of faceplate speed steps: 16 - Faceplate speed range: 7.1 - 224 rpm - Max. torque of the spindle at speed: 3350 / 7.1 - 78.5 / 1120 Nm/rpm Feeds: - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 18 - 900 mm/min - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev Bwjdpfx Akj Ahg Dtsnow - Drilling feeds, number/range: 18 / 25 - 1400 mm/min Rapid traverses: - Spindle, spindle head, table & tool slide: 2800 mm/min - Table rotation: 1 rpm - Tailstock bearing: 696 mm/min Threads: - Metric threads, number/range: 18 / 0.25 – 12 mm - Inch threads, number/range: 18 / 120 - 2.5 threads/1" Electrical data: - Main motor power: 11 kW - Total power consumption: 15 kW - Operating voltage: 3x 400 V / 50 Hz Dimensions & weights: - Machine dimensions WxHxD: approx. 6020 × 3000 x 3500 mm - Machine weight: approx. 14000 kg

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) Bwodpfoizxbiox Aknsw OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

Year of construction: 1987, condition: ready for operation (used), A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available. Bwodpsttv Uajfx Aknow

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10160, travel distance X-axis: 800 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 805 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 3,500 mm, total length: 7,000 mm, total width: 6,000 mm, overall weight: 17,000 kg, number of slots in tool magazine: 180, tool length: 600 mm, tool diameter: 250 mm, tool weight: 35,000 g, STARRAG HECKERT CWK 500 Horizontal Machining Center Bodpe Afnc Esfx Aknjww - Tool holder: HSK A 100 - Min. distance from the front edge of the working spindle to the center of the pallet: 150 mm - Min. distance from the center of the working spindle to the top edge of the pallet: 100 mm - Max. permissible height of workpiece and clamping devices for changing the work area: 900 mm - Workpiece side (pallet) with hole grid according to DIN 55201, clamping surface: 500 x 500 mm - Max. load per pallet (centered): 800 kg - Guide bore diameter: 20 H6 - Centering bore diameter: 50 H6 - Number of mounting threads: 23 x M12 - Distance of the guide bore to the center of the table: diameter 200 +- 0.013 mm - Interference circle diameter: 800 mm - Max. table rotation: 18 rpm - Automatic pallet changer - Pallet changer with rotating setup station - max. pallet change time: 10 sec - Pallet change time with clamping hydraulics: min. 12 sec - Feeds: X/Y/Z axis: continuously adjustable working feed range: 1 - 38,000 mm/min - Working spindle diameter in the front bearing: 100 mm - Max. tool diameter with free neighboring positions: 250 mm - Max. tool diameter for bridge tools: 500 mm - Max. tool diameter with occupied neighboring positions: 125 mm - Tool overhang length: 600 mm - Max. tool weight: 35 kg - Average tool weight with full occupancy: 10 kg - Max. imbalance in the tool magazine: 100 kg - Number of pallets: 2 With Balluff system, technical documentation, with RENISHAW 3D measuring probe, including 30 HSK 100 tool holders, mostly equipped with tools. Transport: The machine can most likely be transported on a truck with a width of up to 3000 mm. FCA D-01445 Radebeul - loaded onto a truck

Condition: used, Year of construction: 1987, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Universal surface grinder Year of Construction: 1987 Machine Weight: approx. 1.5 t Working Area Grinding Length: 520 mm Grinding Width: 160 mm Workpiece Height: 300 mm Bodpfj Acg D Nex Akneww Clamping System Electromagnetic clamping table: 520 × 160 mm Grinding Wheel Wheel Diameter: 230 mm Dimensions Length: approx. 1.5 m Width: approx. 1.8 m Height: approx. 1.6 m EQUIPMENT Rapid traverse in the Z-axis Hydraulic table drive External control cabinet Oil cooling for improved dimensional accuracy Coolant system

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: chip conveyor, documentation/manual, - Year of manufacture: 2019 - Maximum spindle disk diameter: Ø750 mm - X-axis travel: 700 mm - Y-axis travel: 400 mm - Z-axis travel: 400 mm - A-axis rotation range: 360° (continuous rotation) - B-axis rotation range: ±87° - Rapid traverse rate (X-axis): 62 m/min - Rapid traverse rate (Y-axis): 62 m/min - Rapid traverse rate (Z-axis): 62 m/min - Rapid traverse rate (A-axis): 200 rpm - Rapid traverse rate (B-axis): 60 rpm - Maximum spindle speed: 18,000 rpm - Spindle motor power: 28 kW - Torque at 100% load: 181 Nm - Spindle taper: HSK-A63 - Tool magazine capacity: 62 ATC positions - Maximum tool diameter: Ø150 mm - Maximum tool length: 250 mm - Maximum tool weight: 6.5 kg - Tool change time: 8 s - Tool changing system: dual gripper - Overall length: 5000 mm - Overall width: 3260 mm - Overall height: 3200 mm - Machine weight: 12,000 kg Equipment - Coolant filtration system: KNOLL – paper filtration - Chip conveyor: KNOLL 450-K1 - Laser tool measurement system: BLUM Bedpfx Ake Ah E Tvonjww - Spindle probes: RENISHAW - Chilling unit: STARRAG - Washing gun - Chip container - Electronic handwheel - Operating manuals

Condition: like new (used), Year of construction: 2018, operating hours: 240 h, functionality: fully functional, travel distance X-axis: 460 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 410 mm, feed rate X-axis: 48,000 m/min, feed rate Y-axis: 48,000 m/min, feed rate Z-axis: 48,000 m/min, controller manufacturer: siemens 828D, controller model: 828D, total height: 2,602 mm, total length: 3,350 mm, total width: 2,265 mm, table width: 320 mm, table length: 320 mm, table load: 250 kg, rotational speed (max.): 200 rpm, overall weight: 6,200 kg, spindle speed (max.): 18,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 60 mm, spindle motor power: 23 W, spindle nose: hsk63, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Due to the cessation of business operations, we are offering this like-new Hardinge H320 horizontal machining center, manufactured in 2018. Model: H320 Serial number: GHLB7G0001 Date of manufacture: 05/31/2018 Bsde Aazdxepfx Aknoww Supply voltage: 400 V Number of phases: 3 Weight: 6200 kg Cooling on the ball screw spindles Spindle cooled Glass scales on all axes High-speed 4th axis with direct drive motor, 200 rpm Scraper chip conveyor It is also possible to take over the tool holders and machine clamps. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1986, spindle diameter 1 mm x-travel 1 mm Bjdeylzv Ajpfx Akneww y-travel 1 mm total power requirement 1 kW

Condition: used, Horizontal Boring Machine CORNAC C100 Travel X: 1000 mm Travel Y: 1000 mm Travel Z: 1260 mm Fixed table Cone: SA 50 Spindle: Ø 100 mm Spindle exit: 550 mm Bedoz Hv Hhjpfx Aknoww Rotation: from 10 to 1250 RPM Table size: 1550 x 980 mm Surfacing plate: Ø 520 mm Spindle motor: 9,5 kW Scale 3 axes HEIDENHAIN Automatic Feeds: X - Y - Z Supplied with a set of cones Voltage: 380 V Dimensions (L x W x H): 4500 x 2100 x 2450 mm Weight: approx 8 T

Condition: good (used), Year of construction: 2005, operating hours: 33,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Okuma, controller model: OSP E100, table width: 500 mm, table length: 500 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Horizontal machining center Okuma MB 500H with a 2-position pallet changer Year of manufacture: 2005 Control system: Okuma OSP E100M Technical data: Spindle speed: 10 - 15,000 rpm Drive power: 26 kW Tool holder: BT 40 Number of magazine positions: 60 Internal coolant pressure: 70 bar Travel distances: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm 4th axis: Index 1° Number of pallets: 2 Pallet size: 500x500 mm Accessories: - Coolant system, type ConSep 2000, by Mayfran - Chip conveyor, type ConSep, by Mayfran - Tool breakage monitoring in the magazine Bwsdpfxez Tc Uyo Aknsw - Workpiece coolant shower

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: Ob 21882, spindle speed (max.): 700 rpm, feed length X-axis: 15,000 mm, feed length Y-axis: 5,150 mm, feed length Z-axis: 1,600 mm, total width: 6,400 mm, total length: 19,300 mm, total height: 10,370 mm, feed length W-axis: 2,000 mm, spindle diameter: 250 mm, table height: 400 mm, table length: 8,000 mm, table width: 5,665 mm, overall weight: 137,000 kg, year of last overhaul: 2006, grinding spindle motor power: 83,000 W, type of input current: three-phase, We offer for sale a Škoda W250H floor boring machine. This machine is designed for machining heavy and large-sized components for the energy, shipbuilding, metallurgical, mining, and machine production industries. The machine is equipped with a Siemens Sinumerik 840D control system, enabling the execution of demanding boring, drilling, and milling operations. Complete technical documentation is available. Upon request, we can provide additional photos, videos, and information regarding the machine's equipment and technical condition. Standard equipment: Tool and measuring instrument storage rack, mounted on the spindle box. Optional equipment: Cooling system with coolant Rotary table 4000x3550 3 x angular heads Bwodpfx Aezrwq Isknow

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 High-precision drilling machine / Coordinate drilling machine / Jig boring machine (Made in Bienne/Biel, Switzerland). Excellent condition! Only available online until November 16, 2026! The offer has been updated and now includes even more accessories! Tool package with a value of approximately 12,500 EUR. A unique opportunity for connoisseurs of these machines at a special price. Hauser coordinate drilling machines in this condition are now mostly only available from specialized dealers in Switzerland, but at significantly higher prices, up to three times my asking price. Please compare for yourself! Due to the large number of inquiries: please only serious interested parties with a genuine intention to purchase, installment payments are not accepted! As long as the ad is online, the machine is still available. An inspection while the machine is powered on is expressly possible. Only to be sold to appreciative users, such as watchmakers, precision engineering workshops, or testing workshops/prototype construction, not to profit-oriented dealers. The coordinate drilling machine has been with its original owner for 41 years and features the rare option of a motorized table drive/rapid traverse in the X and Y axes, as well as potentiometers. The stepless feed in the X axis also allows for light milling and surfacing operations. This eliminates the need for laborious manual cranking, as is the case with all other Hauser coordinate drilling machines. The machine features thermal stabilization and expansion compensation. To this end, 2 heaters are provided, which are switched on separately before starting work and to maintain high accuracy and dimensional accuracy. This explains the factory-high positional accuracy of 0.002 mm. It is worth mentioning that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a great advantage for precise drilling and surfacing in depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and most likely no longer available in this form. These machines are primarily used in the watch industry, gunsmithing, precision engineering, materials testing and the optical industry, where the highest precision is required. Also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical wiring diagrams, etc. are available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X axis = 400 mm, transverse travel Y axis = 250 mm, Vertical travel Z axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle connection MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds stepless from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 stages from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Bsdpfozuvwlex Aknjww Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm, Machine weight approx. 1500 kg. Payment for the machine will be made, as is customary with used machines, in full net before loading, no partial or installment payments! I prefer the machine to be collected by the buyer by means of a transport company or their own truck. Loading onto a truck is free of charge for the buyer. Shipping (direct transport without reloading) within the EU is still possib

Condition: new, Year of construction: 2026, functionality: fully functional, table load: 10,000 kg, spindle diameter: 130 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 800 rpm, total height: 3,800 mm, total length: 7,030 mm, total width: 4,665 mm, table length: 1,800 mm, table width: 1,600 mm, type of input current: three-phase, overall weight: 29,300 kg, spindle motor power: 15,000 W, MTP TPX6113-2 HORIZONTAL BORING MACHINE Horizontal Boring Machine TPX6113/2 – Precision and Power for Heavy Machining The TPX6113/2 horizontal boring machine is a robust and efficient solution designed for precise machining of large and heavy workpieces. Thanks to its rigid construction and high technical performance, it is ideally suited for use in the mechanical, energy, and steel structure industries. The machine is equipped with a Ø130 mm spindle, ensuring high stability and enabling demanding machining operations. A powerful 15 kW main motor and high torque guarantee efficient performance even under heavy loads. The large worktable (1800 × 1600 mm) with a maximum load capacity of 10,000 kg allows machining of heavy components without compromise. The full table rotation (B axis – 360°) increases flexibility and enables multi-side machining without repositioning the workpiece. Technical Specifications: Spindle diameter: Ø130 mm Max spindle torque: 3136 Nm Max spindle feed force: 31,360 N Number of spindle speeds: 24 Spindle speed range: 4–800 rpm Main motor power: 15 kW Max facing head torque: 4900 Nm Facing head diameter: 750 mm Bwsdpfx Aey Eyg Ujknew Facing head speed range: 2.5–125 rpm Number of facing head speeds: 18 Table size: 1800 × 1600 mm Max table load: 10,000 kg T-slots: 28 mm × 10 Axis travels (X/Y/Z/W/U): 2000 / 1800 / 2000 / 900 / 250 mm Table rotation (B axis): 360° Rapid feed (X/Y/Z/W): 2500 mm/min Feed per spindle revolution (X/Y/Z/U): 0.05–8 / 0.01–2 mm/rev Measurement system accuracy (X/Y/Z): 0.005 mm (Z optional) Measurement system accuracy (B axis): 0.001 mm (optional) Dimensions: 7030 × 4665 × 3800 mm Machine weight: 29,300 kg

Condition: like new (used), Year of construction: 2022, operating hours: 10,000 h, functionality: fully functional, number of slots in tool magazine: 80, MAZAK HCN-5000 Horizontal Machining Center Year 2024 Control Unit: Smooth G Bwjdpfx Akjz Aauksnsw X-axis travel: 730 Y-axis travel: 730 Z-axis travel: 800 Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface: Tapped holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm (high torque) Spindle taper: ISO 40 Rapid traverse rate (X-axis): 60,000 Rapid traverse rate (Y-axis): 60,000 Rapid traverse rate (Z-axis): 60,000 Number of tools (ATC): 40-60-80 Maximum tool diameter (ATC): D. 95 D.170 Maximum tool length (from reference line) (ATC): 170 Tool selection method (ATC): FIXED Maximum tool weight (ATC): 12 Tool change time (ATC): 2.8 Coolant pressure: 15 Bar Coolant tank capacity: 500L Height (machine dimensions): 2813 Width (machine dimensions): 2623 Depth (machine dimensions): 5769 Weight (machine dimensions): 11430 Pallet size: 500x500

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, DEFUM WFM 100N CNC Horizontal Boring and Milling Machine | Siemens 828D | Rebuilt by METALEX in 2014 For sale: DEFUM WFM 100N CNC horizontal boring and milling machine with a rotary worktable and an extendable boring spindle. The machine underwent a complete overhaul, rebuild and modernization by METALEX in 2014. It is equipped with a Siemens SINUMERIK 828D CNC control and a Siemens SINAMICS drive system. Its heavy, rigid construction, 100 mm boring spindle and 1100 × 1100 mm worktable make it suitable for milling, drilling and boring housings, plates and other engineering components. TECHNICAL DATA Manufacturer: DEFUM, Dąbrowa Górnicza, Poland Model: WFM 100N Serial number: 8137 Year of manufacture: 1986 Complete overhaul, rebuild and modernization: 2014, METALEX CNC control: Siemens SINUMERIK 828D Drive system: Siemens SINAMICS Table and travels: – Table working surface: 1100 × 1100 mm – Transverse travel: 1200 mm – Vertical travel: 1000 mm – Longitudinal travel: 900 mm Bedpfx As Ahzavokneww Spindle and drives: – Boring spindle diameter: 100 mm – Spindle motor power: 18.5 kW – Feed drive power: 3 × 4.5 kW – Total installed power: 50 kW Dimensions and weight: – Length: 4610 mm – Width: 3620 mm – Height: 3110 mm – Machine weight: 11,000 kg EQUIPMENT – Siemens SINUMERIK 828D CNC control – Siemens SINAMICS drives – Rotary worktable with T-slots – Extendable boring spindle – Operator panel mounted on a swivel arm – Coolant supply system – Central lubrication system Key feature: complete overhaul and modernization carried out by METALEX in 2014, including a Siemens CNC control retrofit. Please contact us for further information about this offer.

Condition: used, Year of construction: 1996, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, controller model: Siemens 840 C, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS X-axis travel: 1,500 mm Y-axis travel: 1,200 mm Z-axis travel: 1,250 mm Spindle speed: 10–4,000 rpm Spindle power: 40 kW Spindle interface: HSK-A100 Pallet size: 1,000 × 1,000 mm Rotary table speed: 1–500 rpm Pallet load: max. 2,000 kg Magazine type: Chain magazine Number of tool positions: 161 Bwjdpfj Agftmex Aknjw MACHINE DETAILS CNC control: Siemens 840 C Overall dimensions: 8,500 × 4,800 × 4,800 mm EQUIPMENT Chip conveyor Paper filter Rotary table Automatic horizontal and vertical spindle

Condition: good (used), Year of construction: 2013, operating hours: 37,297 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D sl, table width: 1,500 mm, table height: 30 mm, table length: 2,000 mm, table load: 2,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 12,486 h, spindle motor power: 24 W, number of slots in tool magazine: 21, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an EiMa CNC-controlled 5-axis machining center, type Sigma M, with a fixed portal and moving table, designed for the precise machining of aluminum and finishing of steel. The machine is engineered for high accuracy, rigidity, and large travel paths, making it ideal for demanding milling, drilling, and sawing operations in metal and aluminum profile applications. Year of manufacture: 2013 Power-on hours: approx. 37,297 h (as of November 2025) Spindle running time: approx. 12,486 h total (as of November 2025) AXIS TRAVEL & DYNAMICS: - X 3,400 mm · Y 2,300 mm · Z 1,000 mm - Feed rate: X/Y 60 m/min, Z 40 m/min STRUCTURE & TABLE: - Sturdy steel construction, precision linear guides, servo drives, automatic central lubrication - Moving table 2,000 × 1,500 mm, 30 mm thick, threaded grid 100 × 100 mm - Max. load capacity 2,000 kg SPINDLE & TOOL CHANGER: - 24 kW HSK 63 A spindle up to 18,000 rpm, water-cooled - Disc-type tool changer with 20 positions + 1 pick-up position (for tools up to Ø 500 mm) 5-AXIS HEAD: - C3 fork head, swiveling ranges approx. C ±200°, A ±120°, high positioning accuracy Bwsdsx H Ib Nspfx Aknow MEASURING SYSTEMS: - m&h wireless probe (workpiece measurement) - BLUM laser (tool measurement) EQUIPMENT: - MMS system (internal & external lubrication) - Fully enclosed cabin, separate tool change chamber - Mist extraction system with electrostatic separator (approx. 1,900 m³/h) already integrated CONTROL: - Siemens 840D sl, 5-axis package, Advanced Surface, TCP - 15" control panel, remote maintenance prepared ACCURACY: - Repeatability approx. ±0.012 mm SPECIAL FEATURES: - Connected to power – demonstration possible at any time - Direct from production – no dealer sale - Complete technical documentation available - Support with dismantling, loading, and transport possible (at extra cost) HIGHLIGHT: - New spare spindle from Omlat included (approx. €25,000 value) NOTE: - Collection possible from January/February onwards All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: excellent (used), functionality: fully functional, mileage: 18,491 km, gearing type: hydrostat, fuel type: diesel, color: red, overall weight: 28,000 kg, empty load weight: 28,000 kg, tire condition: 80 %, drive condition: 80 %, axle configuration: 4x4, number of seats: 1, mast type: telescopic, suspension: parabolic leaf (spring), Year of construction: 2008, operating hours: 18,491 h, Equipment: additional headlights, adjustable chassis, air conditioning, all wheel drive, cabin, hammer hydraulics, hydraulics, onboard computer, parking heater, For sale: a 2008 JAMA SBU 8000, a specialized, self-propelled rock breaker designed for use in mines and tunnels. The machine is equipped with a boom and an Epiroc hydraulic hammer, used for removing loose rock fragments from the roof and walls and preparing the excavation for further work. A significant advantage is the ability to operate using an internal combustion engine or external electrical power. When connected to a suitable electrical grid, the working unit can operate with the diesel engine turned off. This allows for rock breaking without emissions from the machine's engine in the workplace, a particularly beneficial solution in tunnels and enclosed underground excavations. Additionally, the machine has a compressor mounted in the rear. MACHINE SPECIFICATIONS • Make and model: JAMA SBU 8000 • Year of manufacture: 2008 • Serial number: 8018 • Weight according to nameplate: 28,000 kg • Working equipment: Epiroc hydraulic hammer • External electrical power: 1000 V • CE marking INTERNAL COMBUSTION ENGINE – DEUTZ The machine is equipped with a Deutz TCD 2013 L06 2V six-cylinder industrial engine. This is a turbocharged diesel engine with liquid cooling and intercooling, designed for use in heavy-duty construction machinery. • Model: Deutz TCD 2013 L06 2V • Type: four-stroke diesel engine • Cylinder arrangement: inline, 6-cylinder • Displacement: 7146 cm³ / approximately 7.15 l • Rated power according to the engine nameplate: 200 kW / approximately 272 hp • Rated speed: 2300 rpm • Turbocharging: turbocharger with intercooling • Fuel injection system: Common Rail • Cooling: liquid • Number of valves: 2 per cylinder • Cylinder bore × piston stroke: 108 × 130 mm Bodpe Afihiofx Akneww • Electronic engine management • Unit labeled with Deutz Xchange – manufacturer's engine exchange program OPERATION WITH ELECTRICAL POWER • Possibility of powering the working unit from an external electrical grid • Operation of the equipment with the internal combustion engine turned off • No emissions from the diesel engine during electrical operation • Cavotec cable reel • A solution particularly useful during long-term work in tunnels and underground excavations EQUIPMENT • Working boom with Epiroc hydraulic hammer • Compressor in the rear of the machine • Hydraulic stabilizing supports • Hydraulically controlled front blade • Enclosed operator cab • Control panels with emergency stop buttons • Presto fire suppression system • Hydraulic system for operating the boom and equipment The JAMA SBU 8000 is a machine for companies involved in tunnel construction, underground mining, and rock breaking. The combination of the Deutz engine, the ability to electrically power the working unit, and the Epiroc hammer allows you to adapt the method of operation to the conditions prevailing in the excavation. Please contact us for detailed information and to arrange a viewing.