Used Radial Boring Machine for sale (64,074)

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm Bwedpofbt Huofx Abboh - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Bwjdpfx Aslhwr Rebboh Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Bsdpou T Ty Hefx Abbjwh Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: ready for operation (used), Year of construction: 1983, operating hours: 6,348 h, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, drill diameter: 50 mm, The machine was overhauled in 2009! TECHNICAL DETAILS Drilling depth: 1,500 mm Drill diameter: 5 - 50 mm Travel X-axis: 1,250 mm Travel Y-axis: 900 mm Travel Z-axis: 900 mm Table length: 1,000 mm Table width: 1,000 mm Max. table load: 3,000 kg Spindle speed: 100 - 6,000 rpm Spindle taper: SK 40 MACHINE DETAILS Control: Siemens 802 D Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,600 x 2,000 mm Weight: 6,000 kg Operating hours: 6,348 h Bodpfxeyfhcij Abbowh

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, working width: 2,400 mm, working height: 32 mm, working length: 800 mm, TECHNICAL DETAILS Bwodjydn A Tjpfx Abbsh Working width X-axis: 267 - 2,400 mm Working length Y-axis: 120 - 800 mm Working height Z-axis: 16 - 32 mm 2 upper drilling heads + independent Y-axis grooving consisting of: Left head with 15 vertical spindles in X and Y-axis + one blade for grooving Right head with 15 vertical spindles in X and Y-axis + one automatic hinge installation unit 2 independent lower vertical drilling heads in Y-axis each with 5 + 5 independent spindles MACHINE DETAILS Control: Numerical control with WoodWop software EQUIPMENT Automatic loading system with motorized roller conveyor Tank with vibrator for hinge storage and automatic feeding Unloading system with automatic roller conveyor

Condition: excellent (used), Motor power 1.2 HP, 400 V, 50 Hz Speed 2800 rpm Drilling table size 650 x 330 mm Bsdovzramepfx Abbowh Cross adjustment 300 mm Depth adjustment 150 mm Height adjustment 170 mm Table height 880 mm Weight approx. 280 kg

Condition: new, The R 60 VT PRO is a high-quality radial drilling machine that belongs to the Radial Drilling Machines category, representing the latest generation of conventional radial drill presses from KNUTH. This versatile machine simplifies the machining process, supporting precise drilling, countersinking, and thread cutting—ideal for single parts and small batch productions. Built with premium cast materials, its robust design features a large column and torsion-resistant boom, ensuring stability and reliability. Key functionalities include an electronically controlled servo quill feed with a large touchscreen display, automatic thread cutting capabilities, and a powerful coolant system, all designed to streamline operations. The machine offers adjustable height for the boom, central lubrication for maintenance ease, and a variety of user-friendly interfaces for setting operating parameters. With a drilling capacity of 60 mm and throat depth from 350 to 1,600 mm, this robust and advanced radial drilling machine makes daily production tasks smoother. You can request a quote or order online to enhance your machining capabilities with the R 60 VT PRO. Bsdpfx Asu E Hzwjbbewh

Condition: new, The KNUTH R 80 V radial drilling machine represents a powerful and versatile addition to the Radial Drilling Machines category, designed for drilling, reaming, and countersinking in steel or cast iron. Its robust construction ensures constant high accuracy, while the long projection arm provides exceptional flexibility for handling large and heavy workpieces. Key features include an infinitely variable spindle speed with a digital display and a cube table that offers extended clamping possibilities. Additionally, the machine is equipped with a powerful coolant system, LED work lamp, and user-friendly controls for efficient operation. With a throat depth ranging from 450 to 2,550 mm and a drilling capacity of 80 mm, this model is ideal for various production and construction tasks. Trust KNUTH for your drilling solutions and request a quote for the R 80 V Radial Drilling Machine today. Bwodpfx Aeu Abxfjbboh

Condition: excellent (used), Dowel Drill DB12 1.1 kW Bwodpfswmbpmox Abbsh 8 mm Stroke 3 Spindles

Condition: used, functionality: fully functional, Scheer DB 22 double-sided line boring machine, 2 drilling motors of 1.8 kW each, 32 mm pitch, 21 spindles per beam, good condition, dimensions 3100 x 1100 x 1800 mm, portal passage 850 mm, weight 345 kg Bedew Adrcepfx Abbswh

Condition: used, Year of construction: 1985, Scheer DB5 row drilling machine Year of manufacture: 1985 - 380 Volt - 21 spindles; 32 mm spacing - stop ruler - various dowel drills - portal opening 1056 mm - 2.2 kW Bjdowv Uy Dopfx Abbswh

Condition: new, Number of boring motors 1 St. boring of corner bearing 1=yes, 0=no 1 ja boring of olive 1=yes, 0=no 1 ja Olive drilling machine type OBM-PLUS (corner and scissor bearing + handle olive drilling) Pos. 1 ----- Vertical drilling unit with drill head quick-change device Pneumatic feed via foot valve 1 adjustable back stop 2 swiveling workpiece supports 1 machine stand complete with shelf 220/400V, 50Hz, 1.1KW Pos. 2 ----- Drill head BKF 3, 21.5 mm pitch, quick-changeable Drill holder M 10, cyl. right/left complete with stop system 2200 mm long Total length with 10 folding stops adjusted to constant Grip size (olive drilling) Pos. 3 ----- 1 set of drills (for handle olives) consisting of: 2 dowel drills d = 10 left 1 artificial drill d = 25 (or according to your choice or manufacturer fittings) Pos. 4 ----- Drill head BKF 2/3 can be changed quickly 2/3 spindles for corner bearings drill on the loose frame part (Sigenia, Maco, Roto, Winkhaus, GU) complete with stop system with 2 folding stops Pos. 5 ----- Drill 2 cylinder head drills for corner bearings ----- Basic price in the above version Pos.1 - Pos.5 on request! ----- Special accessories with additional charge: -Folding stop per piece, EUR 110,00/piece -Stop system for central drilling, EUR 1,980.00 -chassis, EUR 920.00 -Roller conveyor right/left 1.5 m, 200 mm wide complete with 4 rollers each, EUR 1,940.00 -Conversion kit for PVC with steel insert Oil brake cylinder for uniform feed speed PVC support to prevent the profile from tipping over Reduction gear for low speed, EUR 1,790.00 -Drill set for PVC with steel insert, EUR 420.00 2 step drills d = 12 mm left 1 piece step drill d = 12 mm right -2 pieces of additional stops for the stop in the tilt window, EUR 180.00 -2 pieces of additional pneumatic stops for gripping the entire fighter groove, EUR 1,650.00 -2 pieces of additional pneumatic stops for gripping the dowel hole in the Fighter area complete, EUR 1,650.00 -4 additional pneumatic double stops for gripping the dowel hole in the fighter area complete, EUR 1,980.00 PS: If the dowel hole is in the middle, 1 stop on the right/left is sufficient. If the dowel hole is off center, you need 2 stops on the right/left. -Packaging 1 box Packaging 1 pallet with foil, on request ----- We will be happy to send you the price list with all options upon request. (Technical information according to manufacturer - no guarantee!) Bwjdpoygm Tcefx Abbeh

Condition: new, Number of boring motors 1 St. boring of corner bearing 1=yes, 0=no 0 nein boring of olive 1=yes, 0=no 1 ja Olive drilling machine type OBM 1 Pos. 1 ----- Standard version (grip olive drilling only) Vertical drilling unit complete with drill head BKF 3, 21.5 mm pitch Drill holder M 10, cyl. right/left Pneumatic feed via foot valve Spring-loaded hold-down devices Stop system 2200 mm Total length with 10 folding stops set for fitting 1 adjustable back stop 2 swiveling workpiece supports 1 machine stand complete with shelf 220/380V, 50Hz, 1.1KW Bwodpfx Ajygm S Ssbboh Pos. 2 ----- 1 set of drills consisting of: 2 dowel drills d = 10 left 1 artificial drill d = 25 (or according to your choice or manufacturer fittings) ----- Price in the above version Pos. 1 to Pos. 2 on request! ----- Special accessories with additional charge: -Folding stop per piece, EUR 110,00/piece. -Stop system for central drilling, EUR 1,980.00 -chassis, EUR 920.00 -Roller conveyor right/left 1.5 m, 200 mm wide complete with 4 rolls each, EUR 1,940.00 -Packaging 1 box Packaging 1 pallet with foil, on request ----- We will be happy to send you the complete price sheet upon request! (Technical information according to manufacturer - no guarantee!)

Condition: excellent (used), feed length X-axis: 700 mm, feed length Y-axis: 350 mm, feed length Z-axis: 475 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, quill stroke: 100 mm, table length: 1,360 mm, table width: 300 mm, Cincinnati 2MK Horizontal Mill with Universal Vertical Head Model: 2MK Table Atea: 1360 x 300mm (53.5” x 11.8”) Longitudinal Travel: 700mm Cross Travel: 350mm Vertical Travel: 475mm Spindle Taper: 50 INT Bwsdpfjygk Drjx Abbjh Spindle Speeds: 25 – 1500 RPM Machine with: Horizontal Arbor & Arbor Support Angular Double Swivel Head

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well maintained Features and technical data: Bedsygbprepfx Abbswh - Number of drilling spindles: 21 pcs., 32 mm pitch - Drilling direction: bottom & end face - Swivel range: 0-90 degrees by handwheel - Pneumatic material clamps: 3 pcs. - Passage: max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction port diameter: 120 mm - Includes a variety of stops (see pictures) Availability: promptly Storage location: 65439 Flörsheim

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm Bwodpjyf Eziofx Abbeh distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Additional information Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: excellent (used), functionality: fully functional, number of spindles: 35 Bjdpew U Aiisfx Abbewh pneumatic head inclination

Condition: excellent (used), Surface of the base plate 880 x 700 mm Bedpfx Abeuigzpobewh Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: 13 mm passage Inner cone MK 3 Stroke 150 mm Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: ready for operation (used), Year of construction: 1977, Asquith ODI Mk2 14/54 5MT Radial Arm Drilling Machine Spindle centre to column centre max. 54" Spindle travel 14″ Spindle taper 5 MT Spindle speeds (16) 40-2040rpm, Spindle motor 5.5 HP Spindle emergency brake Power elevation of arm Power locking to arm and head Box Table Coolant 415V Electrics 1977 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79026 Machine Serial Number: P.33677 Cost: £6,950.00 + VAT Bwedpfxeyg Skas Abbeh Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, The KNUTH KSR 50 VT is a high-performance radial drilling machine that belongs to the Radial Drilling Machines category. Designed with "Tool to the workpiece" in mind, this machine offers exceptional flexibility with clamping surfaces on three sides to accommodate various applications. Built from thick-walled high-grade cast iron, the KSR 50 VT features a robust structure, ensuring durability and precision during operation. The electronically controlled servo quill feed and large touchscreen display enhance user experience, allowing for seamless adjustments of machining parameters. Ideal for single and small series production, it shines in maintenance activities and tool as well as steel construction. With a drilling capacity of 50 mm and a table setup area of 1,200 x 505 mm, the KSR 50 VT is versatile enough for diverse tasks. Buy now to elevate your drilling capabilities with this advanced radial drilling machine. Bwjdpoyfl Uvsfx Abbsh

Condition: good (used), Year of construction: 1994, functionality: fully functional, Slot mortising machine with dowel insertion unit Bwedpfx Aoygw R Sebbsh The machine is sold as shown in the pictures, without any additional accessories!

Condition: used, Year of construction: 1972, bore capacity in steel (diameter) 50,0 mm Bwsdpswiikdefx Abboh arm length 1.350 mm workpiece height max. 1630 mm turning speeds 19 - 1320 U/min bore spindles - Morse Taper 5 MK engine output 5,5 kW weight 5 t range L-W-H 2,4 x 1,0 x 3,55 mm feed movement 475 mm floor plate size: 1650x1000 mm feeds 0,07-2,9 mm/U

Condition: reconditioned (used), functionality: fully functional, AYEN electro-pneumatic feed shaft drilling unit, Type RPM-S4, 3.0 kW, 2850 rpm, stroke 85 mm, 4 units in stock. Bjdpfx Abeqv Ey Ujbowh

Condition: excellent (used), Specification Bwsderpiy Topfx Abbjh Spindle Speeds 9.5 to 1560 (18) Spindle taper No 5 morse Spindle travel 410mm Feeds 0.066 to 0.963 Max spindle height spindle to base 70” Column dia Graduations metric Power Locking Equipment Safety brake Box table Coolant Electrics 440 V 3 phase 50cycles Approx Dims 9’ x 5’ x 11’6” and weighs approx. 6 tons

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, drilling depth: 48 mm, workpiece height (max.): 60 mm, warranty duration: 6 months, Equipment: rotational speed infinitely variable, HOLZ-HER CNC Dowel Drilling & Insertion Machine POWER-PIN 7605 Workpiece length: min. 60 mm, max. unlimited (limited when positioned against stop fields) Software: CAPMUS V7x POWER-PIN Continuous LED strip for easy navigation and status indication Dowel insertion unit DA102 for pre-glued dowels as well as unfinished dowels in combination with PVA glue Glue system LS2 with electronic nozzle needle monitoring ECO MODE for energy-efficient operation 21.5" touchscreen display MOT3 package – motorized adjustment of drilling depth 2D barcode scanner The POWER-PIN dowel machine is suitable both as a standard dowel machine and as the perfect addition to, for example, nesting or console machines. From cabinet bodies to high-quality solid wood drawers from 12 mm material thickness, the 7605 is the ideal solution for precise drilling and insertion of wooden dowels. The continuous LED strip always displays the machine status and assists the operator by indicating the correct position for inserting the workpiece. With the integrated barcode scanner, you can read, for example, DataMatrix codes containing all processing information for the workpiece. Drilling positions and depths are automatically set and approached by the machine – for maximum precision and efficient workflows. Bsdpfeyf Eylox Abbowh Delivery, installation, and commissioning of the machine can be carried out directly by us at an additional cost. The machine is currently located in our dispatch warehouse in Gratwein, Austria. In case of discrepancies between the German version and any foreign language version, only the German version shall apply. Our terms and conditions can be found on our homepage at holzher.de/de/agb.