Used Dowel Boring Machine for sale (64,911)

Condition: ready for operation (used), Number of spindles: 8 Motor: x2 1.5 kW Bwodpfx Ako Agvh Njnow Pressure: Pneumatic Maximum working height: 120 mm Working width: 850 mm

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GÖTZINGER RBS Dowel and Stair Drilling Machine, Swiveling with Laser In very good condition, the machine has been used very little and is in absolutely like-new condition; it comes from an educational institution. It can be used to drill dowel holes and similar. The machine has a BKF-5 drilling head with 5 drill chucks, M10 internal thread. The distance between the drill chucks is 32 mm horizontally and 25 mm vertically. The entire drilling head can be swiveled 360° with a degree indicator and various scales. A standard 2-jaw chuck can also be used. You will also receive 3 additional drill chucks for drills with a cylindrical shank of 12 or 16 mm, and for drills with an M10 external thread. The machine table is 1100 mm wide and 250 mm deep. There is a stop at the front that can be recessed if needed. For the production of dowel joints, there are 2 adjustable angle stops on the machine table, which can be set with an accurate scale. In addition, there are two 2500 mm long stop rails with 2 folding stops and a scale each; these stop rails can be mounted on the left and right. The machine drills completely automatically, which was problematic with larger drill diameters. For this reason, the machine has been converted to manual feed via a feed lever and switch. The workpiece is clamped with 2 pneumatic clamping cylinders; the switch is located directly on the clamping cylinder. 380V, 2100W 2820 rpm Year of manufacture: 2005 Weight: approx. 300 kg With this machine, you can produce all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door and window construction, and similar applications. Stairs can be manufactured very well due to the swiveling capability. The drilling unit can be swiveled to both sides up to 65° with a scale and has a detent at 0°. This allows handrails to be drilled very well into stair stringers with the machine. Due to the stops, the drilling head, and the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled very quickly and accurately. The max. drilling height is 100 mm; the drilling height is adjusted at the front under the machine table with a handwheel. The height can be read on a very precise, mechanical counter. The max. drilling hole depth is 190 mm with a stop and scale. The max. workpiece height is 360 mm. Everything functions perfectly. Comes with a manual. We will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros. This means you have no risk when purchasing. Delivery to Austria and the rest of the EU is also possible upon request. Professional equipment, not hardware store junk. You can start working with the machine immediately. Bjdpfx Akjzgh Tvoneww Very stable and durable construction. The precision guides with the backlash-free ball bearing bushings are in good condition and move easily. The swiveling mechanism is also very smooth due to the 2 groove ball bearings; locking is possible with a locking screw.

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Bjdpfx Aexxi T Ujknsww Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117

Condition: used, Year of construction: 1998, Number of spindles in the hole row: 11 Number of horizontal spindles: 3 Bwjdpjz I Ivdofx Aknsw Pot-band drilling head: yes, Hettich Drill spacing: 32mm Power consumption: 2.2kW Drilling unit: swiveling

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine Bjdjyy Rtzjpfx Aknoww In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. 380V, 1400 and 1800W through the 2 speed ranges. 1400 and 2850 rpm. Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Comes with manual. We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Machine type: Tool milling machine Manufacturer: Knuth Model: UFM 2 Year of manufacture: 2008 Serial number: 143516 WORK TABLE Table dimensions: 1,330 x 320 mm Number of T-slots: 5 TRAVEL RANGES Travel range X-axis: approx. 500 mm Travel range Y-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm ELECTRICAL DATA Operating voltage: 400 V Frequency: 50 Hz Connected power: 5.3 kW MACHINE DETAILS Bwodpo Ad Acqefx Aknsw DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 1,800 mm Height: 2,000 mm Weight: 2,000 kg

Condition: good (used), Year of construction: 1998, Ganner Universal Dowel Drilling Machine Universal dowel drilling machine for: Drilling carcass frames, hardware, and row of holes Drilling beam with 21 spindles Pitch 32 mm Guide rails for drilling rows of holes Angle stops Additional accessories Pneumatic pivoting of the drilling beam Working width 640 mm Portal passage approx. 750 mm Drilling stroke approx. 100 mm Position adjustment of the drilling unit 0-45 mm Position adjustment of the row of holes approx. 300 mm Motor 1.5 kW Technical data available upon request Bwjdpfez Dt Hyox Aknow The data has been taken from a brochure, therefore no guarantee is given.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 254002, type of input current: three-phase, overall weight: 130 kg, input voltage: 380 V, number of spindles: 8, input frequency: 50 Hz, Schleicher frame dowel hole drilling machine DBH 600, Drilling motor 1.5 kW, 380 Volt, 50 Hz, Drilling stroke 0 - 130 mm, Special drilling gear with 3 rows and 8 spindles, 1 clamping cylinder, Special stop system for window frames and window mullions Bwedpfx Ajz Nkuteknow Weight approximately 130 kg as is, at the Seevetal location, excluding transport, EXW (Ex Works), subject to prior sale.

Condition: used, Year of construction: 2018, machine/vehicle number: 432.10.507.19, type of input current: three-phase, overall weight: 340 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 3 A, power: 1.5 kW (2.04 HP), We offer this used Felder FD 21 pro dowel drilling machine, manufactured in 2018. Type: FD 21 pro Serial number: 432.10.507.19 Code: 7502 Voltage: 400.0 V Number of phases: 3 Frequency: 50 Hz Current: 3.35 A Power: 1.5 kW Year of manufacture: 2018 Country of manufacture: Austria If you have any questions or require additional information, please send us a message or contact us by phone. Bwedpfx Aozuwgueknsw

Condition: excellent (used), Year of construction: 1977, overall weight: 370 kg, Ayen automatic nut runner with a large number of tools. Bwjdpfxoz Ekqlj Aknjw

Condition: used, Year of construction: 2015, The machine is suitable for precise and efficient drilling and dowel insertion in furniture production. Technical specifications: Year of manufacture: 2015 Machine dimensions: 2.6 × 1.6 m 3 × vertical drills 3 × horizontal drills X, Y, and Z axes – NC controlled and computer-adjustable Barcode scanner Uses dowels with a diameter of 8 mm Bjdpoz Incdsfx Aknsww Machine is in good condition The machine is available for inspection by prior arrangement. For additional information, pricing, or to arrange an inspection, please contact me.

Condition: not inspected (used), Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Bwjdpov N N Spjfx Aknsw Number of heads vertical , St. Götzinger Drilling and Milling Centre ----- For sale on behalf of a client! Machine for ‘left-hand’ and ‘right-hand’ parts. The machine was controlled via window-making software, but can also be operated via the machine’s own software. The machine is equipped as follows: - Drilling units on the left and right for end-face drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once and the unit carrier then moves to perform the various machining operations. Machine installation length approx. 6 m. For further information, see the attached PDFs.

Condition: good (used), Year of construction: 1980, Dowel drilling machine for frame production Bwsdpsyy I Snsfx Aknsw

Condition: used, Year of construction: 1981, Used machine Year of manufacture: 1981 Universal dowel boring machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Bwjdpfsxx D D Isx Aknow Drilling gearbox motor 2.2 kW with 21 spindles Spindle pitch 32 mm with built-in oil damping Height adjustment 80 mm Drilling depth 80 mm With chassis Weight 420 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 1028 161, drilling depth: 75 mm, total width: 900 mm, total length: 1,200 mm, overall weight: 430 kg, spindle speed (max.): 2,800 rpm, drill spindle length: 800 mm, workpiece height (max.): 80 mm, number of spindles: 23, operating pressure: 6 bar, GANNOMAT COMBI 110 Dowel and multi-hole drilling machine including stops Bsdpfjzvm Hajx Akneww READY FOR USE

Condition: excellent (used), Gannomat slot mortising machine / dowel drilling machine with Leroy-Somer motor - Motor type: LS80L2 - Power: 1.1 kW - Speed: 2810 rpm - Voltage: 220/380 V Bodjy Saw Hjpfx Aknjww - Frequency: 50 Hz - Protection class: IP54 3-phase drive - Stable work table - Precision guide rails - Adjustable stops - Robust metal construction - Ideal for series production and precise wood joints – with drill and cup cutter - Air pressure must be shut off manually

Condition: used, Used dowel drilling machine, Scheer DB 12 3 drilling spindles, pitch 32 mm Maximum drilling depth: 45 mm with a drill length of 80 mm Maximum drilling depth: 70 mm with a drill length of 105 mm Operation: foot pedal Bwjdpezpv Rzsfx Aknsw Number of material clamps: 1 Type of material clamping: pneumatic Table size: 400x250 mm Weight: approx. 130 kg Dimensions: approx. 1350x650x950 mm Motor power: 1.1 kW

Condition: reconditioned (used), Year of construction: 1990, Motors 2x1.85A 50Hz 380V 2800 rpm Air operating pressure 6 bar 30 spindles D=10 mm mount Combination foot switch Emergency stop switch Bedpfx Akjv Nptmonsww Main switch Manual height adjustment Manual side adjustment

Condition: used, Year of construction: 2013, WEEKE OPTIMAT ABD 150, manufactured in 2013. CNC-controlled drilling, gluing, and dowel insertion machine for furniture components. Equipment: - 3 individually controlled vertical drilling spindles, spacing 32 mm Bjdpfx Aks Afawbjnjww - 3 individually controlled horizontal drilling spindles, spacing 32 mm - Gluing unit with adjustable glue quantity - Dowel insertion unit for standard dowels 8 x 30 mm / 8 x 35 mm - Automatic dowel feed via vibration feeder - 4 upper clamping cylinders - Left, right, and center workpiece stops - Automatic central oil lubrication - powerControl with woodWOP and ABDWork Workpiece range: Length 20–1,250 mm, width 100–800 mm, thickness 10–60 mm. The machine is located in the TEC-WOOD warehouse in Poland, approximately one hour from Frankfurt (Oder). The original photos show the machine in its previous location. Inspection, functional testing, and detailed information on the scope of delivery are available by appointment. Price on request. Offer includes free loading onto a truck. Transport is subject to separate agreement. High-quality machines sourced from Germany, Austria, or Switzerland. Consulting and sales handled by DS-Maschinen in Stuttgart. PC and software as shown in the original photos: woodWOP 6.1; Microsoft Windows XP Embedded, Version 2002, Service Pack 3; Beckhoff C9900-I374 v1.1. Counter photo: Total operating time 24,701.5 h, production time approx. 1,806 h. The values refer to different types of counters and the status of the available recording.

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) Bedpoxdttisfx Aknjww - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor with 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits - Machine needs to be inspected/serviced. Basic functions are intact Availability: available shortly Location: 63934 Röllbach Bwedpszk N Dwjfx Aknew

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 High-precision drilling machine / Coordinate drilling machine / Jig boring machine (Made in Bienne/Biel, Switzerland). Excellent condition! Only available online until November 16, 2026! The offer has been updated and now includes even more accessories! Tool package with a value of approximately 12,500 EUR. A unique opportunity for connoisseurs of these machines at a special price. Hauser coordinate drilling machines in this condition are now mostly only available from specialized dealers in Switzerland, but at significantly higher prices, up to three times my asking price. Please compare for yourself! Due to the large number of inquiries: please only serious interested parties with a genuine intention to purchase, installment payments are not accepted! As long as the ad is online, the machine is still available. An inspection while the machine is powered on is expressly possible. Only to be sold to appreciative users, such as watchmakers, precision engineering workshops, or testing workshops/prototype construction, not to profit-oriented dealers. The coordinate drilling machine has been with its original owner for 41 years and features the rare option of a motorized table drive/rapid traverse in the X and Y axes, as well as potentiometers. The stepless feed in the X axis also allows for light milling and surfacing operations. This eliminates the need for laborious manual cranking, as is the case with all other Hauser coordinate drilling machines. The machine features thermal stabilization and expansion compensation. To this end, 2 heaters are provided, which are switched on separately before starting work and to maintain high accuracy and dimensional accuracy. This explains the factory-high positional accuracy of 0.002 mm. It is worth mentioning that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a great advantage for precise drilling and surfacing in depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and most likely no longer available in this form. These machines are primarily used in the watch industry, gunsmithing, precision engineering, materials testing and the optical industry, where the highest precision is required. Also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical wiring diagrams, etc. are available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X axis = 400 mm, transverse travel Y axis = 250 mm, Vertical travel Z axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle connection MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds stepless from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 stages from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm, Machine weight approx. 1500 kg. Payment for the machine will be made, as is customary with used machines, in full net before loading, no partial or installment payments! Bjdpfx Akozuvwlsnoww I prefer the machine to be collected by the buyer by means of a transport company or their own truck. Loading onto a truck is free of charge for the buyer. Shipping (direct transport without reloading) within the EU is still possib

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 508678, drilling depth: 80 mm, total width: 820 mm, total length: 1,350 mm, total height: 1,400 mm, overall weight: 450 kg, number of spindles: 21, power: 2.2 kW (2.99 HP), Universal dowel hole and line boring machine, dowel hole drilling machine, dowel drilling machine Manufacturer: Scheer Year of manufacture: 1989 Type: DB-5 Weight approx.: 450 kg Machine number: 508678 Dimensions: 1350 mm x 820 mm x H 1400 mm Drilling beam length: 640 mm Spindle distance min. 32 mm, max. 640 mm 21 spindles Drilling depth: 80 mm Drilling beam pneumatically swivelling Motor power: 2.2 kW Bwodpfxswuuxke Aknsw

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Bodpfev Trlmox Aknoww Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 2003, Rilesa VLG 1524 Bwedpfx Akou Shzfenew 3 drilling units from above 2 right/left aggregates