Used Carbon for sale (770)

Condition: good (used), Technical Data for Pallet Racking System: Racking System: SSI Schäfer Type: PR600 Technical Data for Installation: Number of rack rows: 01 pc. Length per rack row: approx. 40,680 mm Number of bays per rack row: 01 pc. at 3,600 mm Number of levels plus ground level: 02 pcs. Volume Data: Pallet spaces per bay: 12 pcs. Pallet spaces per rack row: 132 pcs. Total pallet spaces: 132 pcs. Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n.d. Max. weight per pallet: n/a. Scope of Delivery Includes: 12x pallet rack uprights, used Material finish: Sendzimir galvanized Frame type: P95 Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal braces, base plates Uprights are pre-assembled (bolted truss design) 3,000 mm height 1,050 mm depth 44x pallet rack beams, used Material color: RAL 5010 gentian blue INP profile: 120 x 58 mm Beam type: TRV1-360-12-l Connector: 4 HK (hooks) Clear span: approx. 3,600 mm 12x rack protectors, used Height: approx. 750 mm External width: approx. 98 mm Internal width: approx. 92 mm Material thickness: approx. 3 mm Material color: RAL 1021 yellow 88x locking pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 48x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 24x shim plates, used Finish: completely galvanized For leveling uprights on uneven floors Bodpow Davmefx Acyelp 01x load sign With field and compartment load specifications, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only offered for collection. Any further transport or shipment is associated with additional costs, which can be requested from us separately depending on the delivery location and scope.

Year of construction: 2002, condition: ready for operation (used), A longitudinal seam welding system Schnelldorfer is available. Welding process: TIG, sheet materials: carbon steel/stainless steel/aluminum, sheet thickness range: 0.5mm-10mm, max. welding speed: 7m/min, welding length: 2100mm, min. pipe inner diameter: 165mm, max. pipe outer diameter: 800mm, rail dimensions X/Y: 40mm/15mm. Machine dimensions X/Y/Z: approx. 4400mm/1850mm/3300mm, weight: approx. 4300kg, control: Siemens S7. Documentation available. An on-site inspection is possible. Bjdpfxjxl Upho Acyslp

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,000 h, machine/vehicle number: -, laser hours: 1,200 h, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, positioning speed: 72 m/min, repeat accuracy: 0.01 mm, workpiece weight (max.): 1,000 kg, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 6,500 kg, total length: 6,200 mm, working range: 3,050 mm, Equipment: cooling unit, Used Holly Laser 3015 3kW Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y-axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y-axis positioning accuracy: ±0.01 mm - Power: 3.0 kW Bsdpfx Aewcwq Socyjlp - Source brand: Raycus from 2024! - Raytools Auto Focus cutting head - Fuije servo motors - The computer runs Windows and the CypCut software, which offers, among other features, design, file import and export, and work optimization. Installed programs have lifetime licenses. Cutting Thickness - Carbon steel: recommended thickness 20.0 mm - Stainless steel: recommended thickness 8.0 mm - Aluminum: recommended thickness 6.0 mm - Brass: recommended thickness 5.0 mm

Condition: ready for operation (used), functionality: fully functional, mileage: 16,579 km, power: 55 kW (74.78 HP), gearing type: other, fuel type: electric, color: green, number of seats: 1, DGUV certified until: 07/2026, next inspection (TÜV): 07/2026, Year of construction: 2016, machine/vehicle number: 416059, Equipment: UVV, air conditioning, cabin, crane, gripper hydraulics, hydraulics, low noise, For sale is a robust Baljer & Zembrod OBX V-8 material handler, ideal for demanding lifting and material handling operations. This machine stands out thanks to its reliable engineering, powerful performance, and the renowned Baljer & Zembrod quality. The excavator has been used in timber handling and is therefore optimally configured for the requirements of this sector. Bjdpfoxl Rw Iex Acyelp Technical specifications: - Lifting capacity: 2,900 kg at 13 m (without grab) - Maximum outreach: 14.55 m - Net lifting torque: 380 kNm (without grab) - Slewing range: infinitely rotatable - Motor: 55 kW electric motor mounted on vibration dampers - Pump type: Rexroth - Operating hours: 16,579 h - Crane base dimensions: Length 4,900 mm, width 3,600 mm, height 1,200 mm - Base console height: 5.70 m Features & condition: - Semi-mobile crane base for heavy-duty crane with base console for crane and supply unit - Additional ballast weight for stability without anchoring to the concrete slab (usable only in combination with counterweight) - All inspections and maintenance performed regularly, with a complete service history - Solid, immediately operational machine - Suitable for timber handling, recycling, port handling, or heavy-duty applications - Air conditioning - Protective ventilation with activated carbon filter (Wickfelder MCC 60) for the operator's cab - Sound and thermal insulation - Comfort seat with high backrest and side-mounted control elements for crane operation

Condition: new, Year of construction: 2025, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Bodpfx Aoirmgfecyjlp Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. DRIVES: High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. SOFTWARE: The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles.

Year of construction: 2014, condition: used, This listing is for a 3M Zeta Plus 16EZA Encapsulated System Holder The unit is in excellent working condition and is ready for immediate release. The 3M Encapsulated System Holder is engineered to support Zeta Plus depth filtration and related downstream purification processes with optimal ergonomics, hygiene, and operational efficiency. It is specifically designed for biopharmaceutical and biotechnology applications where sterile, high-throughput filtration is required. This system holder accommodates encapsulated filter capsules—eliminating the need for a stainless-steel housing—and offers a pivoting, ergonomic frame that enhances operator safety and eases filter change-outs. Key Features Pivoting Holder Design – The housing pivots between horizontal (waist-height) for loading/unloading and vertical for filtration mode, reducing operator strain and minimizing fluid spills during replacement. Vertical Flow Path Retained – Preserves the proven vertical flow design ideal for depth filtration with 3M Zeta Plus filters and compatibility with 3M polisher or chromatographic clarifiers. Torque-Limiter Sealing – Built-in torque limiter ensures the capsule shell is properly sealed before operation, protecting against leaks or misassembly. Encapsulated Shell Architecture – Eliminates the need for an external stainless-steel cartridge housing, thereby reducing facility clean‑in‑place (CIP) or validation overhead. Shell Options – Offers translucent polycarbonate shells for visual liquid level monitoring or polyphenylene oxide shells capable of sterilization and sanitization. Multiple Flow Configurations Supported – Enables Bottom-In / Bottom-Out and Top-In / Bottom-Out modes to optimize media usage and filter performance. Scalable Modules – Available in pilot and full-production configurations, facilitating scale‑up from lab to manufacturing scale within a unified system design. Technical Specifications Parameter Description Model / Part No. Housing 16EZA1 Blodpfoxl Dy Nsx Acyop Flow Path Vertical flow design, compatible with multiple flow directions Shell Materials Polycarbonate or polyphenylene oxide options (sterilizable) Holder Orientation Pivoting between horizontal (load/unload) & vertical (operational) Sealing Mechanism Torque‑limiter style sealing indicator Operational Scale Supports systems from small pilot scale up to production scale (0.5 L to >2,500 L) Filtration Compatibility 3M Zeta Plus depth filters, 3M Polisher ST, 3M Emphaze AEX Hybrid Purifier, 3M Harvest RC, etc. Footprint Compact vertical footprint; reduced spatial demand in filtration suites Applications Clarification of mammalian cell cultures prior to downstream purification Protection of downstream membranes and chromatography resins via depth filtration Clarification of bacterial, yeast, or insect cell lysates Removal of host cell proteins (HCP), DNA, endotoxins, and particulates Pre‑polishing or polishing after capture chromatography Viral clearance modes in downstream workflows Benefits & Value Proposition Enhanced Ergonomics & Safety – The pivoting design reduces the need to lift used capsules overhead, lowering risk of spills and operator fatigue. Lower Validation Burden – Because the system is fully encapsulated, no external housing cleaning or validation is needed in the customer’s site. Operational Versatility – Flexibility in shell types, flow configurations, and scale continuity from pilot to production. Visual Process Monitoring – Translucent shell...

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: SSI Schäfer Type: PR 400 Installation Details: Number of Racking Rows: 1 unit Length per Racking Row: 36,080 mm Number of Bays per Row: 13 units Number of Levels incl. Ground Level: 3 units Bjdpfew Srrnsx Acyslp Capacity Data: Pallet Spaces per Bay: 21 units Pallet Spaces per Row: 483 units Total Pallet Spaces: 483 units Assumed: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total Height incl. Pallet: n/a Maximum Weight per Pallet: 700 kg Scope of Delivery Includes: 14x Pallet Racking Uprights, used Colour: green Profile dimensions: U 70 x 50 x 3 mm Incl. horizontal and diagonal braces, upright protectors, and base plates The uprights are pre-assembled (welded framework) Height: 3,620 mm Depth: 1,050 mm 52x Pallet Racking Beams, used Colour: green Beam Type: TRN1-270-08-I INP Profile: 80 x 42 mm Connector: 5 hooks Clear span: 2,700 mm Max. load per pair of beams: 2,100 kg with evenly distributed load. 104x Locking Pins, used Finish: sendzimir galvanized For securing the beams against unintentional lifting 56x Anchor Bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 28x Shims, used Finish: fully galvanized For leveling uprights installed on uneven flooring 1x Load Sign With specifications for bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only available for collection. If shipping or delivery is required, this will incur additional costs, which can be determined upon request depending on the delivery location and scope of delivery.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, control type: CNC control, laser source manufacturer: Coherent, laser hours: 910 h, laser power: 350 W, laser wavelength: 10,600 nm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, working length: 3,000 mm, working width: 2,000 mm, Equipment: CE marking, cooling unit, dust extraction, emergency stop, fume extraction, SEI Laser Mercury 2030 with Coherent CO₂ Tube, incl. TEKA Extraction System & Icaro Backlight Software & Camera with Registration Mark Detection + Second Cutting Head for Metal Processing – Precision Large-Format Laser Cutting System For sale is an SEI Laser Mercury 2030, equipped with a powerful Coherent CO₂ laser tube, a high-quality TEKA extraction and filtration unit, as well as the original SEI Icaro Backlight control software. This machine delivers precise results in large-format cutting—ideal for demanding applications in sign making, acrylic processing, and metalworking. Technical Specifications: Manufacturer: SEI Laser Model: Mercury 2030 Laser Source: Coherent CO₂ tube Laser Power: 350 W Bedpow Rp Htefx Acyolp Working Area: approx. 2000 × 3000 mm Control: CNC / SEI Icaro Backlight Software Extraction: Includes TEKA filter unit with pre-filter and activated carbon filter Condition: used, well-maintained, fully functional Availability: immediately Features & Equipment: Class 4 laser thanks to fully enclosed work area Rugged industrial design for continuous operation Coherent CO₂ laser tube – low-maintenance and reliable Icaro Backlight control – ideal for backlight, engraving, and cutting applications Second cutting head for metal processing Includes camera system on the cutting head for registration mark detection High cut quality – clean edges even with intricate shapes Large-format processing of materials such as acrylic, MDF, wood, cardboard, plastics, paper (incl. materials library) High-performance TEKA extraction and filtration for clean workplace air Exact machine hours will be provided upon request. An on-site inspection is possible by appointment. A test run can be carried out on site.

Year of construction: 2023, condition: as good as new (ex-display), DIBIPACK EVOLUTION: THE CUTTING EDGE TECHNOLOGY INHEAT-SHRINKING. Only one operator. Great performances for remarkable outputs. Advanced control and management of cycle. DATA SHEET SPECIFICATIONS – DIBIPACK 4255 SA EV Sealing area: mm 420×550 Sealing system: bottom blade Hold down magnet: standard Programs: 8 Unit counter: standard Power supply: 400 V – 3 Ph + N Maximum power required: kW 6 Power consumption: kW/h 2,9 Overall machine dimensions: mm 2060×700 Working plate height (on stand): mm 920 MORE INFORMATION: Fully electronically controlled (second generation board) Automatic adjustment of sealing time according to production speed Stand-by function (energy saving) Unit-counter Gas spring for hood lift The hold down solenoid keeps the hood closed until the end of the shrinking cycle Stainless steel take out conveyor belt – automatic control Take out belt adjustable in hight Active carbon filter aspirator with activated carbon (standard) Blsdpfx Asmv Ebuecyep Including 1 roll of foil And U.V.V testing

Condition: used, mileage: 76,615 km, power: 174 kW (236.57 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, first registration: 05/2022, loading space length: 4,895 mm, loading space width: 1,928 mm, loading space height: 1,907 mm, emission class: euro6, color: black, number of seats: 6, Year of construction: 2022, total length: 4,895 mm, total width: 1,928 mm, total height: 1,907 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle number: 93105A The vehicle is located at our site: Am Grün 1, 35066 Frankenberg (Eder) Equipment Lines and Packages * PS2 AMG Line * MX0 BlueEFFICIENCY Package * ZH7 Design and Equipment Line Edition * Z3N Night Package * EZ5 Parking Package * FP3 Mirror Package * JP4 Lane Package Exterior * T14 Active locking mechanism sliding door * Trailer hitch: electrical wiring for trailer socket * Q50 Trailer hitch: removable ball head * JA1 Washer fluid level indicator * Electrically folding exterior mirrors * F69 Exterior mirrors electrically adjustable and heated, both sides * F69 Exterior mirrors with integrated turn indicator Bedpfow Umq Dex Acyjlp * Exterior mirrors with Blind Spot Assist * Exterior mirrors with surround lighting * Exterior mirrors painted black * Brake calipers with lettering (Mercedes-Benz) * AMG roof edge spoiler * Third brake light * Rear door/tailgate windows with wiper/washer system * W32 Rear compartment/passenger compartment window: electrically operated, rear left/right * W16 Compartment/cabin window: fixed, front left * W17 Compartment/cabin window: fixed, front right * AMG front apron * LED tail lights * W64 Hinged rear window * LG2 Intelligent Light System LED * Body/structure: Bus * KB5 Fuel tank: enlarged * Radiator grille painted black * RK4 Alloy wheels * 9197 Metallic paint * IN1 Wheelbase 3200 mm * JF1 Windscreen wipers with rain sensor * T19 Sliding door load/passenger compartment left * Sliding door load/passenger compartment right * CM2 Bumper/side strip & handle on tailgate painted * Body cladding/side skirts (AMG) * XA5 Perm. gross vehicle weight 3.20 t Interior * SZ7 Storage net on front seat backrest left * Storage net on front seat backrest right * LC9 Ambient lighting dashboard * U73 Armrests passenger compartment * Outside temperature display * LC3 Lighting in rear grab handle * V44 Floor covering: carpet in driver's cab * V33 Floor covering: carpet in load/passenger compartment * VD7 Roof lining/interior headliner, cloth black * T74 Rear entry handle * LB9 Entry lights * Electric window lifters, double * VH1 Grab handles in rear passenger area * HZ7 Rear automatic climate control (Tempmatik) * HH4 Comfort automatic climate control Thermotronic * LC4 Comfort lighting passenger/load area * SH9 Head airbag system (windowbag) * CL3 Steering wheel (leather) * FG0 Front center console with roller cover/storage compartment * Interior rearview mirror * UR1 Seat configuration: quick-release system for seat rail system * V4Y Seat upholstery: fabric * Passenger seat in cab: heated * SB2 Passenger seat in cab: comfort * H16 Driver's seat in cab: heated * SB1 Driver's seat in cab: comfort * US4 Seats in rear/load compartment: 1st row, comfort 3-seater bench * US8 Seats in rear/load compartment: 2nd row, left single seat * US9 Seats in rear/load compartment: 2nd row, right single seat * FS5 Sun visors with illuminated mirrors * Sport pedal cluster, brushed aluminium * ES2 Socket (12V connection) in load/passenger compartment * W70 Rear tinted glass/privacy glass * H00 Warm air duct to load/passenger compartment * FB1 Trim elements in carbon look Multimedia * E1D DAB tuner (digital radio reception) * Bluetooth hands-free system * JK5 Instrument cluster with color display * Communication module Mercedes me connect (internet-based services) * ES9 Media Interface (universal interface for iPod/AUX/USB) * EY5 Mercedes-Benz emergency call system * Multimediasystem MBUX (10.2" touchscreen)

Condition: new, functionality: fully functional, Year of construction: 2025, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. Innovative fibre laser technology allows much faster, more efficient and cheaper cutting of sheet metal parts compared to CO2 lasers. The cutters are characterised by high speeds, productivity and exceptional cutting accuracy. They provide unrivalled precision and repeatability. Our fibre lasers are primarily designed for processing materials such as: - Independent metals - Aluminium - Stainless steel - Carbon steel SOURCE POWER 3000W CONSTRUCTION The frame of our laser is designed and manufactured from scratch in our factory. The high-quality steel used for the machines is cut, then welded and precision-machined. The entire frame, gantry and gate arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES High-resolution, high-power Schneider AC servo system motors (Y1Y2 x 2000W, x 1500w, z 400W) have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. Drive transmission is via high-performance planetary gears. The X and Y axes use the classic and proven helical slats, which ensure long life and precision. HEAD A liquid-cooled, WSX head is used for cutting sheet metal. A high-performance quartz glass lens focuses the diffused laser beam on the material to be cut, ensuring high cutting accuracy. For the process to proceed correctly, the HSU system adjusts the head height taking into account material irregularities. A safety window located between the nozzle and the lens protects the lens unit from splinters of molten metal. LASER SOURCE Bjdpfx Aceuruyaoyelp The laser uses a Raycus Laser light source with high electro-optical conversion efficiency, low power consumption and high beam quality. In addition, it allows faster and more efficient operation and contributes to the elimination of operator errors. In addition, the source is resistant to backscattering, i.e. the beam returning to the laser. Good power stability ensures efficient working while consuming low energy. COOLING The S&A CWFL industrial dual-temperature units are specially designed for cooling fibre lasers. They have multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm and high/low temperature alarm. AUTOMATIC LUBRICATION SYSTEM To keep the machine in good condition - the gears and guides need to be lubricated with oil at most every few days. An automatic system starts the lubrication every specified time and in the correct amount, and all parameters are set in the software.

Condition: used, Year of construction: 2007, Overview  The offered filling line for returnable glass bottles is composed of a selection of high-quality machines, chosen by BEVMAQ. Most of the machines were previously used in breweries in Germany. The condition of the machines is good, as they have been regularly maintained and continuously serviced. Apart from some of the machines, the majority has been dismantled by a German partner company and are now stored in a warehouse. The line layout can be adapted to the customer's needs and his plant layout, as the conveyors will be new or refurbished. Tech Specs  Capacity: 40,000 bph at 0.5 l bottles Suitable: Carbonated water and soft drinks Beer / Beer Mix recently serviced, regularly maintained Formats processed: 330 ml  500 ml YOM: ranging from 2007 to 2016 The Line in Detail Crate Depalletizer | Krones | Pressant Duplex | 2011 Includes safety fences, conveyors, offloading table Decrater | Krones | Linapac II | 2012 Machine can work as crater and decrater Bottle Washer | Krones | Lavatec | 2013 Crate Washer | Klotzki | 2011 Empty Bottle Inspector | Miho | David 2 | 2016 Counter Pressure Filler + Capper | KHS | Innofill DRS | 2013 Fill Level Inspection | KHS | 2013 Includes bottle rejection system and conveyor belt Tunnel Pasteurizer | Krones | Linaflex | 2013 Cold Glue Labeller | Krones | Topmodul | 2015 Includes a module prepared to work with seal label With servo driven bottle orientation Crater | Krones | Smartpack | 2011 Crater Palletizer | Transpak | NEW Bornbinder | Born| - | NEW Mixer | Famix | 30,000 - 2K | 2008 Flash Pasteurizer | GEA | 25,000 | 2007 All pallet, crate or bottle conveyors will be individually adapted to the plant design, manufactured in KHS/Krones standard. Necessary format parts for bottle, label, crate and cap handling can be supplied. Bedpfxjxf D Dbj Acyslp

Condition: good (used), Technical Data for the Pallet Racking System: Bljdow Sr Rkopfx Acyjp Racking System: SSI Schäfer Type: PR 400 Technical Data for Installation: Number of Racking Runs: 1 unit Length per Racking Run: 108,100 mm Number of Bays per Racking Run: 39 units Scope of Delivery Includes: 40x Pallet Rack Frames, used Colour: green Profile dimensions: U 70 x 50 x 3 mm Including horizontal and diagonal bracing, frame protectors, and base plates The frames are pre-assembled (welded lattice structure) Height: 3,620 mm Depth: 1,050 mm 144x Pallet Rack Beams, used Colour: green Beam type: TRN1-270-08-I INP profile: 80 x 42 mm Connector: 5 HK Clear span: 2,700 mm Max. load per beam pair: 2,100 kg, with evenly distributed load. 288x Safety Pins, used Finish: Sendzimir-galvanised For securing longitudinal beams against unintentional lifting 160x Wedge Anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanised Approved for: cracked concrete 80x Levelling Plates, used Finish: fully galvanised For levelling frames installed on uneven floors 1x Load Sign with field and compartment load ratings, manufacturer and order number Dimensions: 420 x 297 x 3 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 250028, power: 250 kW (339.91 HP), pressure (min.): 4 bar, pressure (max.): 13.5 bar, The pneumatic container is used to provide oil-free, dry compressed air for test equipment. TECHNICAL DETAILS Maximum air flow: 42.83 m³/min Pressure range: 4 - 13.5 bar Oil-free compressed air capacity: 42 m³/min at max. 7.5 bar Drive Motor power: 250 kW System structure Compressor: EKO 250 D Refrigeration dryer: HHDp 4500 / HF 5-M/5 Activated carbon adsorber: BEKO Clearpoint L 3400 V Post-filter: HF 6-60 Oil-water separator: BEKO Öwamat 16 Electric condensate drain: BEKO 14 Bsdpfexf A Hzox Acyjlp MACHINE DETAILS Compressor unit: 4,000 x 2,100 x 2,500 mm Overall dimensions (L x W x H): 13,000 x 2,950 x 2,900mm Total weight: 20,000 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 612334X00379, Year of construction: 2020, operating hours: 2,810 h, load capacity: 750 kg, lifting height: 10,610 mm, fuel type: electric, construction height: 4,400 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 1,250 mm, overall weight: 8,330 kg, Equipment: lighting, Attention: The complete equipment list of the vehicle is included as a photo in the images of the ad! STILL Order Picker MX-X 80 – Used unit with premium features, single sale Vehicle Data: Blsdpfew U El Tex Acyep - Model: STILL MX-X 80 (Very Narrow Aisle Truck with Pivoting Reach Fork) - Year of manufacture: 2020 | Operating hours: approx. 2,810 h - Load capacity: 800 kg | Lift height: 8,750 mm | Height: 4,400 mm - Additional lift: 1,800 mm | Fork length: 1,250 mm | Aisle width: 2,200 mm - Pivoting reach fork: 180° swiveling, max. 1,400 kg at 600 mm LSA - Adjustable forks: hydraulic, outer width 400 – 1,650 mm Features (Selection): - Mobile personal protection system with 2 laser scanners, fully factory-integrated - Special design pivoting reach fork carriage with reinforced capacity, reach carriage for wide loads up to 2,600 mm - IZF – Inductive Guidance System with guide wire detection, lane detection, automatic aisle recognition & emergency stop on signal loss - Cabin: Combined design for standing/seated order picking, with LED work lights, warning beacon & polycarbonate windshield - Ergonomic driver’s seat (fabric-covered, height & tilt adjustable, suspended), foldable - Control panel: multifunctional, steering knob, 5 programmable favorite keys, contactless two-hand sensor, MMS terminal preparation - Safety: automatic braking, stop & absolute stop at aisle ends, rescue lowering system, RFID-controlled height limit (2 definable heights) - OPTISPEED 3.0: dynamic load display depending on fork height, automatic reach reduction - Additional equipment: Panoramic rear-view mirrors on both sides, DIN A4 writing pad, modular accessory system on cabin railing Battery & Charger: - 80V traction battery (930 Ah), low maintenance, with central water filling system (STILL) - External charger D 80/100 PXS, charging time approx. 9–11 h, 400 V / 32A CEE, LED charge status display Special features: - Extended chassis – ideal for special pallets/corlettes – no disadvantage in racking applications - Machine is currently set up and ready for demonstration - Single unit – not available as a series sale, we bought the truck ourselves 1 year ago but did not set up a warehouse Condition & Removal: - Very well maintained, fully functional, no known defects - Removal only possible by crane (hall height 10 m) – disassembly required and to be organized by the buyer or by arrangement

Condition: new, Year of construction: 2025, 2040 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 4100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Blodpfx Asin Uilecyjp Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: good (used), Technical Data for Pallet Rack System: Racking System: Jung Heinrich Type: Esmena Installation Data: Number of rack rows: 1 unit Length per rack row: 33,450 mm Number of bays per rack row: 12 units Number of levels (plus floor level): 2 units Volume Data: Pallet spaces per bay: 9 units Number of pallet spaces per row: 108 units Total number of pallet spaces: 108 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.s. Max. weight per pallet: approx. 800 kg Scope of delivery includes: 13x pallet rack frames, used Material colour: blue Frame profile: MX610 Profile dimensions: 76.2 x 63.2 x 1.8 mm Including horizontal and diagonal braces, base plates Frames are pre-assembled (bolted truss construction) Height: 2,100 mm Depth: 1,050 mm 48x pallet rack beams, used Material colour: yellow Box profile: 140 x 40 mm Beam type: N140x40 SEG Connector: 5 hooks Blodpjwk I N Usfx Acyep Clear span: 2,705 mm Max. load per pair of beams: 2,400 kg with evenly distributed load 96x locking pins, used Material finish: Sendzimir galvanized For securing the beams against unintentional lifting 52x wedge anchors, new Manufacturer: Hilti Model designation: HST2 M12x105/10 Version: Carbon steel, galvanized Approved for: cracked concrete 26x leveling plates, used Finish: fully galvanized For leveling frames installed on uneven floors 1x load capacity sign With details of bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on this item: This item is available for collection only. Any transport or shipping beyond this must be requested separately and will incur additional costs, which depend on delivery location and scope of delivery and can be requested from us.

Year of construction: 2025, condition: new, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. Innovative fibre laser technology allows much faster, more efficient and cheaper cutting of sheet metal parts compared to CO2 lasers. The cutters are characterised by high speeds, productivity and exceptional cutting accuracy. They provide unrivalled precision and repeatability. Our fibre lasers are primarily designed for processing materials such as: Bledpfx Ajiqpanecyep - Independent metals - Aluminium - Stainless steel - Carbon steel SOURCE POWER 3000W CONSTRUCTION The frame of our laser is designed and manufactured from scratch in our factory. The high-quality steel used for the machines is cut, then welded and precision-machined. The entire frame, gantry and gate arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES High-resolution, high-power Schneider AC servo system motors (Y1Y2 x 2000W, x 1500w, z 400W) have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. Drive transmission is via high-performance planetary gears. The X and Y axes use the classic and proven helical slats, which ensure long life and precision. HEAD A liquid-cooled, WSX head is used for cutting sheet metal. A high-performance quartz glass lens focuses the diffused laser beam on the material to be cut, ensuring high cutting accuracy. For the process to proceed correctly, the HSU system adjusts the head height taking into account material irregularities. A safety window located between the nozzle and the lens protects the lens unit from splinters of molten metal. LASER SOURCE The laser uses a Raycus Laser light source with high electro-optical conversion efficiency, low power consumption and high beam quality. In addition, it allows faster and more efficient operation and contributes to the elimination of operator errors. In addition, the source is resistant to backscattering, i.e. the beam returning to the laser. Good power stability ensures efficient working while consuming low energy. COOLING The S&A CWFL industrial dual-temperature units are specially designed for cooling fibre lasers. They have multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm and high/low temperature alarm. INTERCHANGEABLE WORKTABLE The interchangeable work table located at the rear of the machine reduces laser downtime to a maximum. Automatic table replacement takes just 10 seconds. This gives the operator time to take the cut parts from the table and load a new sheet while the laser is working on the other table. This system ensures a very high production flow. AUTOMATIC LUBRICATION SYSTEM To keep the machine in good condition - the gears and guides need to be lubricated with oil at most every few days. An automatic system starts the lubrication every specified time and in the correct amount, and all parameters are set in the software.

Condition: new, Year of construction: 2025, 1525 ATC milling ploter THE MACHINE HAS A TOOL STORAGE EQUIPPED WITH 6 ISO30 CONES !!! CNC 1525 ATC milling plotter is a precise machine constructed in Poland, it is used to process many engineering materials, i.e. wood, wood-based materials (chipboard, MDF, OSB etc.), plastics (plexiglass, PVC, HPL etc.), composites (dibond, carbon, alucobond), soft metals, etc. The ATC series machines have an additionally reinforced structure and the applied AC servo drives on each axis, coupled with an affordable price, leave the competition far behind. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm Bljdpfjin Eyvsx Acyjp DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, 1520 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2000 [mm]. Blsdpfxsin Ezts Acysp AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, 1020 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1000 x 2000 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. Blsdpfx Acsin Ezdeyop CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, 1325 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. Bodpfsin Eu Hsx Acyslp SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, 1012 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1000 x 1200 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. Bljdpfx Aoin Ewzjcyjp DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, 2030 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. Bljdpoin Eqfjfx Acyjp AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist

Condition: new, Year of construction: 2025, THE MACHINE HAS A TOOL STORAGE EQUIPPED WITH 6 ISO30 CONES !!! CNC 2030 ATC CNC Router is a precise machine constructed in Poland, it is used to process many engineering materials, i.e. wood, wood-based materials (chipboard, MDF, OSB etc.), plastics (plexiglass, PVC, HPL etc.), composites (dibond, carbon, alucobond), soft metals, etc. The ATC series machines have an additionally reinforced structure and the applied AC servo drives on each axis, coupled with an affordable price, leave the competition far behind. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist Bsdpfx Aoin Ek Decyolp - any size of the working table