Used Decoration for sale (307)

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Cabin with rotating table Wheel Fedpfx Aksz I Iv Rsyepn Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: used, Year of construction: 2007, Controls: EIP, voltage: 230V, connected load: 3kVA, with CE marking. An on-site inspection is possible. Fpsdpfx Akszzqb Sjysn

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) Fjdpfxjzg Epus Akyspn • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 66091, input voltage: 380 V, power: 0.37 kW (0.50 HP), type of input current: three-phase, The Martin Mechanic MAS 493/77 is an industrial quilting machine (a special stitching machine) used in the textile industry for quilting and tufting pillows or mattresses. Key technical features of the machine: Application: Specifically designed for heavy-duty materials such as garden cushions, standard pillows, and mattresses. Maximum thickness: Can quilt materials up to 130 mm thick. Quilting function: The machine automatically stitches decorative or reinforcing rings with a diameter ranging from 8 to 18 mm. If you are interested, please include your contact information in your inquiry. Fodozzdulepfx Akyspn

Condition: excellent (used), Year of construction: 2015, 📌 Glass Processing Center – DENVER Krea / Krea Fit (CNC) Fpsdpfx Akey Edlbjyon General Description: A professional 3-axis CNC glass processing center by DENVER – model Krea (also commonly known as Krea Fit), designed for comprehensive processing of flat glass. The machine combines functions such as grinding, milling, drilling, edge shaping, and polishing, making it an ideal solution for glassworks, window manufacturers, producers of decorative elements, and appliance (white goods) manufacturers. ⸻ 🛠️ Technical Features and Functions 🔹 CNC Construction: 3 interpolated axes ensure precise tool guidance and high processing quality. 🔹 Spindle: powerful electrospindle with a power rating of approx. 6.6–9 kW (S6), optimized for glass working. 🔹 Automatic Tool Changer: 14-position tool magazine (standard), which speeds up operations and increases work flexibility. 🔹 CAD-CAM & CNC Control: an intuitive CNC control system with CAD-CAM support simplifies programming and 2D/3D model processing. 🔹 Automation: can be equipped with an integrated automatic loading and unloading system, handling trolley, and robot for glass sheet handling. 🔹 Vacuum Kit: additional vacuum tank and distributor for stable glass clamping during processing. 🔹 Helpful Accessories Included:  • various vacuum suction cups,  • tool sets,  • reverse osmosis system (e.g. IDROTECNICA IDRO RO 130 ST),  • tanks and auxiliary equipment. ⸻ Kdsboyk Dx Dsludqncok 📏 Working Range ✅ Supported Materials: flat glass of various thicknesses (typically from a few mm up to approx. 25 mm – depending on tool configuration and program). ✅ Possible Operations:  • edge grinding,  • drilling and milling holes,  • beveling and rounding edges,  • engraving and cutting shapes

Condition: used, Year of construction: 2011, Industrial furnace for tempering flat glass, used in construction, for door and window glass, furniture glass, decorative glass, and certain types of coated glass. Manufacturer: SHANGHAI REFINE MACHINERY Type: RGT A-1530 Maximum glass size: 1500 x 3000 mm Minimum glass size: approx. 200 x 300 mm Glass thickness: 5-19 mm Output for 5 mm glass: approx. 16-18 cycles/hour Fodpfxezh Uyrj Akyopn Installed power: 500 kVA Compressed air pressure: >0.8 MPa Year of manufacture: 2011 Technical condition: used machine, requires technical inspection, condition as shown in the photos.

Year of construction: 2022, condition: excellent (used), Manufacturer / Model Voorwood L115M (H) with return conveyor Machine Type: Edge Foiling / Profiling / Sanding / Grooving Line with Return Conveyor Overview High-production edge finishing machine capable of profiling, sanding, grooving and applying decorative foil to panel edges and drawer side groove in a single pass. Includes return conveyor system for continuous single-operator workflow. Key Features - Single-pass shaping, sanding, and foil application - Up to ~8,000 lineal feet per shift - Return conveyor system for continuous production - Bottom feed chain with non-marking pads - Digital readouts for fast setup - PLC touchscreen controls - Temperature-controlled foil application with auto disengage Fpjdsyvcw Aopfx Akyjn Conveyor System - Receiving rollers: 5–100 FPM - Transfer belts: 115 FPM - Return rollers: 90 FPM - Adjustable working height: 29”–40” - Handles material up to 2½” thick - Independent motors for receiving and return Machining Stations Shaping: 5 HP motor, adjustable spindle Sanding: precision sanding spindle Foiling: 8” wheel, temperature controlled, auto tension Grooving saw: 8” blade, 3 HP motor Capacity - Feed speed: 2.4 – 10.7 m/min - Thickness: 3 – 51 mm - Minimum part size: 76 × 76 mm Utilities - 3-phase power - Dust extraction: 3 × 127 mm ports - Approx. 400 CFM required Ideal For - Drawer sides - Cabinet manufacturing - MDF edge finishing - High-volume production

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total length: 9,000 mm, working height: 120 mm, For sale: BARBERAN PUR-33-L profile wrapping machine (year 2010) – machine for laminating elements with decorative foil using PUR hot-melt adhesive (hot gluing). The machine features a single foil feeder, automatic control, and an added antistatic corona system (reduces electrostatic charges – improves foil feed stability). Technical specifications: Model: BARBERAN PUR-33-L Year of manufacture: 2010 Fpsdpeyw Nxkefx Akyen Machine length: approx. 9 m Max. element width: 120 mm Feed speed: up to 45 m/min Power supply: 400V / 50Hz Foil feeder: 1 unit Equipment / additional features: Antistatic corona (retrofitted) – neutralizes foil static Printer – enables edge printing (e.g. strip name / operator / description) Glue melter with approx. 60L capacity – allows extended operation without interruption. Important: The machine applies PUR adhesive using hot-melt technology Heaters are NOT included in the set.

Year of construction: 2018, condition: good (used), Danmatic Decor Unit 900 topping conveyor 2018, Stainless, décor unit 900, is designed for decoration of buns, rolls, full dough sheet products and more, brand new HMI touch screen Siemens panel, belt dimensions 2600mm x 880mm, mobile, 3Ph Fsdpfx Asuanwgokyspn

Condition: good (used), Year of construction: 2003, Dry rack loading system for profiles Manufacturer: Makor Type: ACA Year of manufacture: 2003 Fpedpfsz Nky Njx Akyon Automatic rack loader at the end of the line for loading dry racks with painted profiles and strips Typical applications: Profile painting, strip production, coating lines for baseboards, decorative strips, and window strips Design: 4 positioning arms for short and long profiles up to approx. 5000 mm (arm spacing approx. 0 - 1600 - 2120 - 2550 mm) Paternoster rack width approx. 175 mm Basic concept: - Automatic transfer of the coated profiles from the end of the line to the dry racks - 4 positioning arms for different profile lengths - Can be used as the final stage of a profile coating line / board coating machine / strip spraying machine

Condition: excellent (used), Year of construction: 2018, operating hours: 3,000 h, The Agfa Jeti Tauro H2500 LED is a 2.54 m hybrid flatbed/roll-to-roll UV LED inkjet printer. Colour configuration: CMYK Lc Lm + White + primer (6c W4 P2). Under Premium care service contract. Perfect working conditions. Only 2.900 hours of print. Full automation - Double robot configuration The high-performance UV LED printer for demanding large-format production. 2.54 m print width Up to 275 m²/h UV LED technology Hybrid flatbed + roll-to-roll Up to 1,200 dpi CMYK + Light Cyan + Light Magenta Optional White & Primer Fpjdpfxoz D I R Tj Akyon Print on rigid and flexible media Designed for high-volume, industrial production One machine. Endless possibilities. From signage and displays to POS, retail graphics, décor and banners, the Jeti Tauro H2500 LED delivers high-quality results with exceptional productivity. For further technical specifications please refer to attached brochure.

Condition: used, Year of construction: 2004, functionality: fully functional, Well used Sunnen honing machine with Felsomat loading system. Diameter range (INSIDE Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when loaded with CGT tools TurboHone® tools: 3.81 to 32 mm when loaded with MMT tools Connecting rod tools: 53.8 to 63.8 mm when fitted with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Max. Workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Fodpjud Nm Rsfx Akyopn Stroke speed range: 33 to 500 H/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar is recommended Temperature range: 0° to 35° C Floor space requirements: (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 x H 1829 Color: Pearl grey with pewter grey and burgundy decorative stripes Stand weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic set-up: spindle speed, stroke speed, stroke length, infeed value and sparking Automatic finishing: Standard Machine operating modes Automatic: Manual: Series production Individual production Clamping optional

Condition: excellent (used), functionality: fully functional, working width: 300 mm, brushing unit diameter: 240 mm, total length: 3,600 mm, total width: 1,000 mm, total height: 900 mm, height adjustment type: electric, overall weight: 400 kg, working height: 100 mm, workpiece height (max.): 100 mm, workpiece width (max.): 300 mm, workpiece length (max.): 3,600 mm, WOOD AGING BRUSHING MACHINE | 4 BRUSHES | 300 MM Sanding machine for aged wood JBS MACHINERY PROCHERA! Professional PROCHERA brushing/sanding machine designed for structuring, brushing, and aging wood. The machine features 4 independent brushing units and a conveyor belt with adjustable feed speed. It is a robust industrial design intended for continuous processing of wooden components. This brushing machine is ideal for producing aged boards, wooden flooring, facades, countertops, decorative elements, paneling, and other products requiring the enhancement of the natural wood grain. TECHNICAL DATA - Manufacturer: PROCHERA - Type: brushing/sanding machine for wood structuring - Number of working units: 4 - Number of brushes: 4 - diameter 240mm - Maximum working width: 300 mm - Maximum height of workpiece: 100 mm - Feed speed: 0–23 m/min - Conveyor: belt type - Feed speed adjustment: stepless - Adjustment of working units: independent - Brush working direction: option for co-rotating/counter-rotating operation Gross price including VAT margin or 23% VAT invoice PROCHERA uses various types of brushes in these machines, allowing for both delicate and deep surface structuring. The first units can be equipped with metal brushes for more aggressive grain exposure, and subsequent units can use abrasive brushes for further processing and surface smoothing. The machine is primarily intended for: wood brushing, surface structuring, wood aging, exposing the natural grain pattern, surface preparation before oiling, wood preparation before waxing or varnishing, production of flooring boards, production of facade boards, production of countertops and decorative elements, processing of solid wood. Thanks to the four working units, it is possible to achieve multi-stage surface processing – from a strong opening of the wood structure to its further smoothing and finishing. WHY IS IT WORTH IT? This is a professional machine for companies involved in the production of aged boards, flooring, facades, countertops, and wooden decorative elements. Four working units allow for significantly greater flexibility compared to simple single-unit brushing machines. Adjustable feed allows for the selection of operating parameters for a specific material and desired effect. The machine is ready for further operation. Possibility to view the machine and test its operation after prior contact. Fsdpfx Aszxz T Tokyjpn JBS MACHINERY JBS MACHINERY GROUP Sp. z o.o. New and used woodworking machines Professional wood processing equipment Possibility to arrange transport in Poland and Europe. We invite you to contact us regarding price, additional photos, a video of the machine in operation, and details regarding transport.

Condition: ready for operation (used), functionality: fully functional, total width: 1,030 mm, total length: 3,540 mm, total height: 1,560 mm, input voltage: 400 V, overall weight: 5,000 kg, type of input current: AC, input frequency: 50 Hz, input current: 25 A, temperature: 220 °C, Equipment: CE marking, Heidelberg SBG hot-foil stamping machine, suitable for high-quality decorative finishing of paper and board. The machine is in good condition, well maintained and has been carefully operated. It is suitable for hot-foil stamping. Machine Highlights Manufacturer: Heidelberg Model: SBG Machine type: Hot-foil stamping and embossing machine Maximum sheet size: approx. 560 × 770 mm Maximum stamping area: approx. 540 × 750 mm Hot-foil stamping Embossing Suitable for paper and board Good condition Well maintained Carefully operated Ready for continued professional use Inspection possible by appointment The Heidelberg SBG is a proven and robust machine for professional hot-foil stamping and finishing applications. Fpedpfx Aoz Hptnjkyen Further technical specifications, photographs and additional information are available upon request

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: TAM-164, compressed air connection: 6 bar, input voltage: 400 V, total width: 1,880 mm, total length: 8,200 mm, total height: 1,950 mm, type of input current: three-phase, input current: 32 A, warranty duration: 3 months, pneumatic connection: 12 bar, power of the servo motor: 14,000 W, Equipment: CE marking, documentation/manual, type plate available, Used automatic KELLER Tampo master pad printing machine, designed for decorating pens and cylindrical parts. The machine enables 3-colour printing. The machine operates in fully automatic mode: the operator loads the parts into the feeder, and after completion of the process, the finished parts are automatically unloaded into a carton. The equipment includes a servo-driven chain conveyor, automatic part loading and unloading modules, a positioning station, an ionizer, three independent pad printing modules with an automatic pad cleaning system, hot-air drying between the individual printing stations, an IR drying tunnel after completion of the printing process, and a vision inspection system for print quality with automatic rejection of defective parts. Adjustable conveyor prisms and pneumatic rotary modules allow the machine settings to be adapted to different part dimensions. The machine is controlled by a Mitsubishi PLC and a 10″ HMI touchscreen, allowing recipes and process parameters to be managed. The machine is also equipped with a remote communication module. The production process starts with the automatic transfer of the part from the feeder onto the conveyor. The ionizer neutralizes electrostatic charges on the surface of the part before printing. The part is then positioned and transferred successively to three pad printing stations. Each station applies one colour, with hot-air drying between the individual printing stages. After completion of the three-colour printing process, the part passes through the IR drying tunnel and is then subjected to automatic vision inspection. Finished parts are automatically unloaded into a carton, while parts with detected defects are diverted to a separate container. Fpsdpfx Akez D Ht Toyon Maximum graphic size: 60 × 60 mm Part dimensions: length 60–150 mm, diameter 8–14 mm. Machine output: up to 2400 pcs/h. Electrical power supply: 3 × 400 V, 32 A. Required compressed air pressure: 6–8 bar. The machine is operational and in working condition. A link to a video showing the machine in operation is provided below. Before sale, the machine will undergo servicing, and we provide a 3-month warranty. The machine can be inspected and demonstrated in operation at our premises in Poland (European Union). The standard demonstration includes a presentation of the machine's operation. Upon request, we can perform paid technological tests using the customer's parts. The machine is sold in the condition and configuration shown in the photographs. Upon request, modifications or additional equipment can be provided according to the customer's individual requirements. Standard delivery terms: EXW. We can additionally arrange transport to a location anywhere in the world. Additional equipment: possibility of manufacturing dedicated tooling for a specific part and carrying out technological tests, including selection of printing parameters and consumables. The price is quoted in EUR.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming Fpodpfx Ajzmrw Sskyen • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Year of construction: 2015, condition: excellent (used), Microglass FLY 600 Glass Lamination Furnace – a professional machine for the production of laminated glass. For sale is a professional Microglass FLY 600 lamination furnace designed for the production of laminated glass using the vacuum method. The machine is ideally suited for glassworks producing safety glass (VSG), decorative glass, glass with EVA film, and for drying coatings. The unit is equipped with a modern heating system based on infrared (IR) emitters and forced hot air circulation, which ensures uniform temperature and high lamination quality. (mitindustrial.it) Technical specifications: ● Model: FLY 600 ● Manufacturer: Microglass / MIT ● Application: glass lamination, drying of paints/coatings ● Working area: ● 1 platform 1800 × 3200 mm ● Working chamber height: 600 mm ● Number of working drawers: 1 ● External machine dimensions (closed): ● approx. 2450 × 4230 × 1350 mm ● Length with open drawers: approx. 8500 mm ● Machine weight: approx. 3100 kg ● Installed power: 45 kW ● Power supply: 400 V, 3 phases, 50 Hz ● Average energy consumption per standard cycle: approx. 27 kWh ● Lamination temperature: 130°C ● Drying temperature: 150°C ● Vacuum pump: ● two-stage ● power approx. 1.5 kW ● Control: ● touch panel ● digital vacuum gauge ● Programs: ● up to 256 programmable recipes Fpsdpjzga H Iofx Akysn ● possibility to set time cycles ● Heating system: ● tubular IR emitters ● hot air circulation ● Forced cooling: YES ● High-strength silicone membrane ● PTFE mesh to improve vacuum parameters ● Possibility to use an additional drawer to increase productivity (mitindustrial.it) Machine advantages: ✔ large production format ✔ high lamination quality without air bubbles ✔ economical operation for serial and single production ✔ intuitive operation via touch screen ✔ solid industrial construction ✔ ideal for VSG, decorative glass, and custom projects The machine is ready for operation. An excellent solution for professional glassworks looking for an efficient lamination furnace.

Condition: used, Year of construction: 2009, functionality: fully functional, total width: 4,300 mm, total length: 3,700 mm, total height: 3,000 mm, Description For sale is a Tonello Laser Blaze 250 industrial laser finishing system, offered as a complete enclosed workstation. This high-performance system is specifically designed for laser-based garment finishing, enabling precise and repeatable effects such as denim fading, whiskering, engraving, and decorative surface treatments. The Laser Blaze series by Tonello S.r.l. is widely recognized in industrial denim production, offering a modern and sustainable alternative to traditional manual processes. The system utilizes a Rofin CO₂ laser source, known for its precision, stability, and reliability in continuous production environments. This unit replaces labor-intensive finishing methods such as hand-scraping, sandblasting, and chemical spraying, significantly improving consistency, efficiency, and environmental impact. The machine has been used in a professional garment factory environment and has been tested in operation with video documentation (March 2026). Recently serviced on 27.02.2026. Includes • Tonello Laser Blaze 250 enclosed laser cabin • Integrated laser processing unit • Computer workstation with control system • Electrical cabinets • Cooling unit (MTA) • Ventilation / exhaust connections • Operator control panel and integrated safety system Technical Details • Manufacturer: Tonello S.r.l., Italy • Model: Laser Blaze 250 • Laser source: Rofin CO₂ • Year: 2009 • Power: approx. 30 kW system • Voltage: 400V, 3-phase • Work area: approx. up to 150 × 150 cm • Application: Denim laser finishing and garment treatment Key Features • High-precision CO₂ laser technology for consistent results • Advanced control via Tonello CREA software • Capability for both flat and 3D (mannequin-based) processing • 360° garment effects without flat-pattern limitations • Double-position workflow for improved productivity • Fully enclosed workstation with integrated safety systems Technical Capabilities • Denim distressing (whiskers, chevrons, worn effects) • Laser engraving of logos, graphics, and textures • Photorealistic surface patterning • Multi-material capability (denim, leather, technical textiles) • High repeatability – identical results from first to last garment Sustainability Benefits • Eliminates need for sandblasting and manual abrasion • Reduces water and chemical consumption significantly • Lower energy usage compared to traditional laundry processes • Improves worker safety and production cleanliness Condition Used industrial condition. Machine is complete and was operational prior to factory shutdown. Tested and video recorded in operation (05–06.03.2026). Recently serviced (27.02.2026). Typical signs of use from production environment. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications • Denim laser fading and whiskering • Garment engraving and marking • Decorative textile finishing • Replacement for manual sandblasting processes Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling, loading, and transport. Fodpfey Ai Ehox Akyopn Professional dismantling strongly recommended due to system size and complexity.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: B4R87655, input voltage: 230 V, travel distance X-axis: 450 mm, travel distance Y-axis: 360 mm, overall weight: 720 kg, total length: 2,330 mm, total width: 1,360 mm, total height: 1,700 mm, nominal power (apparent): 1 kVA, rotational speed (max.): 1,000 rpm, rotational speed (min.): 100 rpm, Brother BE-1204B-BC Industrial 4-Head Embroidery Machine Description For sale is a professional Brother BE-1204B-BC industrial multi-head embroidery machine, offered as a complete production workstation. This is a high-quality Brother industrial embroidery system with 4 embroidery heads and 12 needles per head, allowing simultaneous multi-piece embroidery production with up to 48 thread positions in total. The machine is designed for commercial embroidery production where consistent quality, high throughput and reliable operation are required. It is suitable for logos, uniforms, promotional garments, workwear, corporate textiles and contract embroidery production. The unit has been used in a professional garment factory environment and stored indoors. Key features • Brother industrial 4-head embroidery system • 12 needles per head • Total 48 needle / thread positions • Simultaneous embroidery on 4 items • Suitable for multi-colour logo and textile embroidery • Heavy-duty bridge-type industrial frame • Individual thread tension adjustment • Electronic control panel • Thread cone stand included • Embroidery hoops included as shown • Integrated bobbin winding unit • Designed for continuous professional production use Technical details • Manufacturer: Brother Industries, Ltd. • Model: BE-1204B-BC • Serial number: B4A87655 • Type: Industrial multi-head embroidery machine • Number of heads: 4 Fpjdsy Ndudjpfx Akyen • Needles: 12 needles per head • Total needle positions: 48 • Configuration: Bridge-type multi-head embroidery system • Control system: Electronic Brother control unit • Setup: Complete table-mounted workstation with thread rack Condition • Used industrial condition • Tested and fully working • From professional production environment • Stored indoors • Typical signs of use from factory environment • Sold as-is, where-is, without warranty Typical applications • Workwear embroidery • Uniform production • Corporate logos • Promotional textiles • Contract embroidery production • Small and medium embroidery factories • Multi-colour garment decoration Included • Brother BE-1204B-BC embroidery machine • 4 embroidery heads • Thread cone stand • Industrial table / bridge frame • Control panel • Bobbin winding unit • Embroidery hoops as shown Location Valga, Estonia Dismantling & transport Buyer is responsible for dismantling, loading and transport. Professional dismantling and careful transport planning recommended.

Condition: used, Year of construction: 2011, Gorreri DVG 500 dispensing unit Year of manufacture: 2011 Condition: functional Suitable for filling, dispensing, or decorating various types of products made from doughs, creams, jams, and other liquid products. Fpedpez A Sa Aefx Akyon Performance: max. 40 cycles per minute Compressed air: 250 l/min (6 bar) Dimensions L x W x H: 1200 x 600 x 1850 mm Weight: 80 kg

Condition: used, mileage: 284,316 km, power: 165 kW (224.34 HP), fuel type: diesel, gearing type: automatic, first registration: 06/2020, color: blue, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, soot filter, Special equipment: Audio navigation system Discover Media (Bluetooth, touchscreen color display, SD card interface), digital radio reception (DAB+), speakers (6), electronic voice amplification (in-car communication), USB multimedia interface (iPhone / iPod) with AUX-IN, Bluetooth interface for mobile phone, App-Connect, equipment package: Light + Sight, automatic headlight activation (ALS) with leaving home / coming home function, foldable remote key (2), reinforced rear axle suspension / damping, increased payload to 3.08 t, load compartment lining, load compartment blind (roll cover system, pick-up), premium multi-function display (color display), light alloy wheels 8x19 (Cantera), metallic paint, spare wheel in roadworthy condition (light alloy), on-board tools and jack, illuminated side sills, Style package Chrome 3 Plus (styling bar plus and side sills with step), styling bar (stainless steel), side sills (stainless steel) with step, 3rd brake light LED with cargo area lighting, rear windows with sun protection film, heated windshield washer nozzles, auxiliary heater / parking heater with remote control Additional equipment: 2nd row of seats, bench seat (3 seats), passenger airbag deactivatable, airbag driver / passenger side, exterior mirror aspherical, left, exterior mirror elect. adjustable and heated, exterior mirror convex, right, exterior mirror painted / partially chrome-plated, license plate lamp LED, display for windshield washer fluid level, floor covering rear (carpet), floor covering front (carpet), headliner fabric, gray, anti-theft device for wheels (wheel locks), parking aid front and rear including reversing camera, electronic differential lock (EDS), traction control (ASR), driver assistance system: trailer stabilization program, driver assistance system: multi-collision brake, electric windows front and rear, glove compartment lockable, tailgate comfort (lockable, pick-up), rear lights dark tinted, rear window heated, interior: decorative inserts light silver, interior filter: dust and pollen filter with activated carbon filter, Isofix mounts for child seat in rear seat, body / structure: double cab (double-cab), body / structure: pick-up, air conditioning Climatronic 2-zone, headrests rear (3-fold), radiator grille black painted, with 2 double chrome slats and 6 vertical chrome struts, leather partial trim (gear / selector lever knob and handbrake lever knob leather), gear / selector lever knob leather, handbrake lever knob leather, steering column (steering wheel) mechanically adjustable, height / length adjustment, headlight range adjustment, model refinement, engine 3.0 Ltr. - 165 kW V6 TDI DPF, rear fog light, wheelbase 3097 mm, smoker package, low emission according to exhaust standard Euro 6, mud flaps front and rear, side airbags front with head airbag unit, seat belts front with seat belt tensioner, height adjustable, seat cover / upholstery: leather Vienna, front seats ErgoComfort (including 14-way seat adjustment, partially electric), lumbar support front, electrically adjustable, seat heating front, voice control system, start / stop system, sockets (12V connection) 4-fold, in dashboard, center console, rear and cargo area outside, rear bumper chrome, front bumper vehicle color, door seals with dust protection, door handles outside vehicle color, first aid kit and warning triangle, rear windows tinted (65%), lashing eyes on cargo area / cargo floor, mobile phone / cell phone preparation, warm air cha Fpedpfxezrri Ej Akyjn

Condition: used, Year of construction: 2008, Versch GL 18 Closure for medicinal vial GL18 Fjdpfx Akodqbzqsyspn Injection mold with 10-cavity

Condition: new, functionality: fully functional, Year of construction: 2026, color: other, overall weight: 2,500 kg, loading space width: 300 mm, loading space length: 600 mm, Equipment: air conditioning, bathroom, cooling unit, hot water, lighting, shower, Hello, we are a manufacturer of: Pavilions Offices Apartments Sanitary units Food service units Made with the best polyurethane PIR insulation, 120 mm thick. We focus on very good insulation. We always have standard containers in stock, 6x3 meters, suitable for use as offices. Floor: 120 mm thick polyurethane composite panel with a thermal transmittance of 0.18 W/m2K, plus an OSB panel and PVC flooring. Walls: Polyurethane composite panel, 100mm or 120 mm thick, with a thermal transmittance of 0.22 W/m2K or 0.18 W/m2K. RAL 7016 anthracite color. Roof: Polyurethane composite panel, 100 mm thick, with a thermal transmittance of 0.22 W/m2K. External and internal finish in RAL 7016, but a wide range of decorative options are available. Window, dimensions 980 x 2000 mm – 1 unit. Opening window, 900 x 1900 mm – 1 unit. Aluminum entrance door with glass – 1 unit; dimensions 1100 x 2100 mm. Electrical system: 2 lamps, 2 double sockets, 1 double switch, fuse box. Fpsdpfx Ajz Drpaskysn Lead time: 2-5 weeks, depending on the specifications. IT IS POSSIBLE TO CREATE A CUSTOM DESIGN FOR WINDOW AND DOOR PLACEMENT. FOR AN ADDITIONAL FEE. AIR CONDITIONING BATHROOM Kitchen Wood interior Heating, and much more. Price for a standard 6x3 unit. OTHER DESIGNS AND DIMENSIONS ARE AVAILABLE. The fastest way to contact us is via WhatsApp or email. We always arrange transportation for our customers.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, HP Latex 360 is a professional wide-format latex printer designed for high-quality printing on a variety of media. Fpjdpfxjyhncbo Akyen This robust machine delivers exceptional print quality with environmentally friendly latex inks and is suitable for indoor and outdoor applications, including banners, signage, vehicle graphics, wall decorations, soft signage, and textiles. The printer combines reliable performance with HP’s proven latex technology, offering scratch resistance, vibrant color output, and odor-free prints right off the printer. With its wide-format capabilities, the HP Latex 360 is ideal for production environments seeking fast turnaround and consistent results. This machine is a dependable solution for print shops, sign makers, and production facilities looking for a versatile latex printing system with excellent durability and print quality.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, Professional Overlock Machine DURKOPP ADLER 669-180010 M-TYPE For sale: a professional, specialized single-needle, free-arm (cylindrical) sewing machine from the renowned German brand Dürkopp Adler, model 669-180010 from the exclusive M-TYPE series (ECO version). Manufactured in Europe (Czech Republic), guaranteeing the highest quality of workmanship. The machine is in very good visual and technical condition – well-maintained, clean, fully functional, and complete. 🌟 Key features and equipment: 🔄 Movable (synchronous) overlock attachment included: The machine features a professional mechanism where the overlock attachment moves in full synchronization with the needle feed. This guarantees perfect, even edge finishing with overlock without wrinkling or pulling the material – even on tight curves. The cost of such an attachment alone is a significant expense; here, you get it already installed on the machine! 📏 Stitch length up to 9 mm: A wide range of adjustment allows for ideal adaptation of the stitch density – from precise construction seams to long, aesthetic decorative stitches on the overlock. 👟 Adjustable presser foot stroke up to 9 mm: Manual, convenient adjustment of the presser foot height. This allows the machine to smoothly and without skipped stitches, overcome transverse seams, thickenings, and the joining of multiple layers of heavy materials. ↩️ Convenient manual reverse: A classic, ergonomically positioned lever for reverse sewing enables quick and reliable backstitching and securing the stitch manually, precisely at the desired moment. 📐 Narrow cylindrical arm (Ø 50 mm): A design created for processing three-dimensional elements and closed loops (bags, backpacks, footwear, filters, car side panels). It allows for free sewing where a standard flat sewing machine cannot access. Triple feed (bottom toothed, needle, and top presser foot): Powerful penetration force. The machine easily handles thick leather, synthetic leather, felt, and multi-layered technical materials. ECO version – Reliability and simplicity: The design is free of complicated electronics and pneumatics, eliminating the risk of costly failures of computer components. The machine is ideal for small and large workshops – you simply plug it into a standard 230V outlet and start working immediately (no need to connect a compressor). Energy-efficient motor with needle positioning: A modern drive that operates quietly and consumes minimal electricity. The positioning function ensures that the needle always stops in the selected position (e.g., always at the top or always embedded in the material). Fpjdsz Dphyopfx Akyjn 🎁 Included: Dürkopp Adler 669 machine head Original, stable table and stand Installed, ready-to-use overlock attachment Spare bobbins We have several units of this model available. Price upon request. Delivery to the customer by courier is possible.