Used Casting for sale (1,872)

Condition: used, Straightening and welding plate, steel and grey cast iron, heavily ribbed Gujdpfoqylk Uox Ak Ueg Heavy-duty straightening plate Length: 2000 mm Width: 1500 mm Thickness: 125 mm Plate thickness: approx. 40 mm throughout Table height: 880 mm - Table substructure made of steel (custom-made) Weight: 1700 kg Good condition

Condition: used, Stahl Autocast 42 x 42SP, Tilt & Pour Casting Turning Machine. S/No. 87699 36. S/No. Country of Origin: U.S.A. Gusdjz Akbuopfx Ak Usg Location: These lots are located in Warwick, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Dimo Vertical Casting Machine, Top Platen 695mm x 696mm, Sat on Bottom Melting Pot Location: These lots are located in Warwick, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Gsdpoz Akaqefx Ak Ujug Lot 3 of Auction 3495

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control Gsdpfxjz Ag Rro Ak Uoug - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Cast iron bed Length: 3650 mm Width: 1370 mm Thickness: 150 mm 11 T-slots - dimensions 32 x 18 mm Slots spacing: 125 mm Assembly in 2 parts Dimensions of each part: L 1820 mm x W 1370 mm x H 150 mm Total height on base 875 mm Gusdpfx Akszzvzds Usg Weight: approx 4 T

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T Gujdpfxjzzvyyo Ak Ueg

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Guodezzvytjpfx Ak Usg Weight: approx 4,5 T

Condition: used, Alignment and welding plate, made of cast steel – gray cast iron, heavily ribbed formerly used as a scribing and measuring plate heavy-duty alignment plate Length: 2000 mm Gsdpfszxr Tdex Ak Uoug Width: 1000 mm Thickness: 240 mm Working height: 850 mm Plate thickness: approx. 30 mm, continuous - 5 adjustable feet Weight: approx. 1000 kg good surface condition

Condition: ready for operation (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Complete aluminum ingot casting and stacking line manufactured in 2022 by GHI Smart Furnaces. Inclined casting machine for the production of 10 kg commercial aluminum ingots, with a nominal capacity of 5 t/h. The line includes an automatic pouring system, water spray cooling system, demolding system, cooling and ingot positioning conveyor belt, 3-axis stacking robot, and a walking beam hydraulic conveyor for package handling. • Application: casting and solidification of metal ingots • Status: available for immediate sale • Current condition: in operation The equipment has been operated under normal industrial conditions and has been maintained in accordance with the manufacturer's recommendations. The machine is suitable for the production of aluminum ingots and can be integrated into existing melting and casting operations. Its robust design ensures reliable operation and consistent casting quality. Guedjzbty Sspfx Ak Ueg

Condition: used, 2 Cast iron V supports Width: 1400 mm Height: 1370 mm Gjdpfx Akozy Ewls Uoug Base depth: 750 mm Slot width: 200 mm V width: 940 mm V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit Ideal for positioning large rotors

Condition: used, Cast iron clamping cube 2 faces Length: 1000 mm Height: 600 mm Depth: 800 mm T-slots dimensions: 38 x 22 mm Gedpjzwxh Sofx Ak Ujug Weight: approx 600 kg

Condition: good (used), Cast iron clamping cube Length: 1290 mm Width: 920 mm Height: 510 mm T-slots dimensions: 42 x 25 mm 2 faces slotted Gujdpfx Akezwxh Ee Ueg Weight: approx 1 T

Condition: used, Pair of cast iron angle plates Width: 1000 mm Height: 2075 mm Depth: 700 mm Unit weight: 1 T Guedpfszwxhrox Ak Uog

Condition: used, Cast angle plate Width: 640 mm Height: 400 mm Depth: 320 mm Slots dimensions: 100 x 24 mm Weight: 110 KG Gjdpfx Aezwxhlsk Ueug

Condition: used, Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Gusdpszwxg Uofx Ak Ujg Unit weight: approx 6 T

Condition: used, Pair of cast iron angle plates Gujdpszwxghofx Ak Uog Height: 3000 mm Width: 1000 mm Depth: 1245 mm Weight: 3 T / unit

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T Guodpfx Aszwxbfsk Uog

Condition: good (used), Cast iron marbles Gjdpfszww Uqsx Ak Usug Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Weight: 7 T 2 same plates available.

Condition: used, Cast iron control/tracing marble Gjdpfozww Ukox Ak Usug Length: 1700 mm Width: 700 mm Thickness: 230 mm Height on feet: 940 mm Weight: 0,8 T

Condition: good (used), Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle Gjdpec R Iyaofx Ak Ueug -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: used, Radial fan with an aluminum cast housing, Guodpfx Akjztrv Io Uog filter fan Motor power: 1.8 kW Mains connection: 380 volts, 50 Hz Weight: approx. 30 kg

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, component A and component B The dispensing head has been extended with a Y-shaped slide. - Manual adjustment for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for component A + B - Material pressure tank 50 l for component A - Level monitoring for component A + B - Material recirculation to the dispensing pump for component A and B - Material evacuation for component A - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Work table approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, component A - Transfer station for bung hole drum, component B - Dispensing control (Siemens PLC control based on S7-300) - Precision piston dispensing pump for component A and B - Positive displacement metering pump A, component, 257 ccm - Positive displacement metering pump B, component, 64 ccm --> 1 x spare positive displacement metering pump A and positive displacement metering pump B are included. These have been reconditioned by Rampf as an exchange unit. (see picture) Note: The potting system is located at our site in Austria. Gujdpfxezgck Nj Ak Ueg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 4,700 mm, ram adjustment: 100 mm, installation height: 550 mm, table height: 1,200 mm, total width: 1,700 mm, total length: 2,700 mm, table length: 2,100 mm, table width: 1,000 mm, pressing force: 200 t, control cabinet height: 2,245 mm, control cabinet width: 2,400 mm, input voltage: 400 V, distance between side stands: 520 mm, distance between stands: 2,100 mm, overall weight: 48,000 kg, year of last overhaul: 2025, input frequency: 50 Hz, ZEULENRODA Punching and Forming Machine - Cast Iron Version - HR 200-2000 NL The punching machine is sustainably manufactured as a new machine, using carefully inspected, reusable cast iron components (table, headstock, and side supports). Press ram newly manufactured in a vibration-damping cast iron design. Gsdozu Avbspfx Ak Usug Drive system with a compact drive unit and a 2-connecting rod power transmission. • Total pressing force 200 t • Stroke rate 30...120 min-¹ • Working capacity 29 kNm • Ram adjustment 100 ±0.01 mm • Ram stroke, adjustable 30 - 150 mm • Press force monitoring • Hydraulic overload protection • Main control panel + Two-hand control panel • Hardware and software interface for strip lubrication / roller feed / strip coiler • Control system SIEMENS S7-1500 • Remote maintenance

Year of construction: 2019, condition: ready for operation (used), A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. The system allows mechanical preparation for retrofitting up to 3 additional filler metering systems. It is recommended to renew the lines and the diaphragm pumps before commissioning. Documentation available. An on-site inspection is possible. Gjdpfxeyt N A Hj Ak Ueug

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Gusdpsza E Rmefx Ak Ujg