Used Channel for sale (950)

Condition: excellent (used), Year of construction: 2022, operating hours: 1,500 h, functionality: fully functional, Channel baling press Paal Pacomat III-50D, year of manufacture 2022, very good condition Crodpe Ah Riksfx Aiisi Technical data: Manufacturer Kadant Paal Type Pacomat III-50D Year of manufacture 2022 Operating hours approx. 1500 Pressing force 50 t Connected power 24 kW Feed opening 1250 x 1020 mm Bale dimensions 750 x 1100 mm, length variable Tying 4-way automatic Throughput at 35 kg/m³ approx. 6.4 t/h 60 kg/m³ approx. 8.6 t/h 80 kg/m³ approx. 12.7 t/h Bale weight up to 650 kg Transport dimensions approx. 8172 x 2030 x 2500 mm (LxWxH) Machine weight approx. 12000 kg Materials: paper, cardboard, film The press is still in use until the beginning of December and can be inspected while in operation. The condition is very good. It has only been used for paper/punching waste. The complete operating manual including electrical/hydraulic wiring diagram and CE declaration is available. The conveyor belt shown in the pictures is not included in the scope of supply. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any guarantee.

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: BA 20090966, For sale is a film die / single-channel die from the manufacturer EDS GmbH, Austria, type FK-TID 1650mm, manufactured around 2010. General information: • Manufacturer: EDS GmbH, Austria • Type: Film die FK-TID 1650mm Credpfx Ae Ahm Tveiisi • Serial number: BA 20090966 • Year of manufacture: approx. 2010 • Lip width: 1,650 mm • Opening ratio: 0.5 – 1.5 mm • Weight (approximate): 970 kg • Nominal torque of screws: 70 - 70% for operating temperatures of 17.8°C - 288°C - 60% for operating temperatures above 288°C • Electrical equipment: 240 volts, single-phase • Total power: 27,000 watts • Number of control zones: 16 Condition Used, fully functional. • Sale from location (EXW) • Further information and additional photos available upon request. • Errors, changes and prior sale reserved.

Condition: used, functionality: fully functional, The device is complete and operational – it was previously used in conjunction with a Pitney Bowes XPV inserting machine. Credpfx Ajy Izcpeiisi

Condition: used, Width: 60 cm Complete roll forming line equipped with tools for the production of a new type of industrial gutter for galvanized steel/stainless steel CE compliant Uncoiler capacity: 2 metric tons maximum width: 600 mm inner and outer coil diameter: 508–920 mm hydraulic jaw expansion: 460–640 mm 4 kW Roll forming line Type H 18 stations maximum width: 600 mm maximum thickness: 0.8 mm shaft diameter: 60 mm maximum center-to-center shaft distance: 300 mm Siemens Simatic touchscreen control + Ethernet connection 7.5 kW Hydraulic shear Force: 5 metric tons Condition: machine has seen very little use; new value 450,000 euros Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December Crjdpfx Aiez R S T Uoioi - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 2013, functionality: fully functional, working width: 330 mm, passage height: 120 mm, total length: 5,000 mm, Equipment: documentation/manual, Infrared drying tunnel for profiled wood Manufacturer: Makor Type: FTC-IRE Year of manufacture: 2013 The Makor FTC I.R.E. paint drying system is designed for the accelerated curing of paints and surface coatings using electric heating elements, which are applied to frame timber, moldings, profiled wood, and generally all types of wood profiles. It can also be used for preheating the profiles before the painting process to improve the paint quality. Passage width approx. 330 mm Passage height approx. 120 mm Infrared heating elements from above and below Includes outlet conveyor belt, manufacturer: Makor Length 4000 mm, conveyor belt width 250 mm Connected load approx. 55 kW Dimensions: Drying tunnel approx. 5000 x 1400 x 1750 mm (L x W x H) Operator terminal approx. 1200 x 500 x 1100 mm (L x W x H) Conveyor belt approx. 4000 x 600 mm (L x W) Total weight approx. 2200 kg Crodpszhap Eofx Aiisi Includes documentation, wiring diagram, and operating manual.

Condition: used, volume flow: 230 m³/h, Becker SV 5.250/2-74 Industrial Side Channel Vacuum Pump / Blower (230 m³/h, 3.0 kW), Used Equipment Technical Data: Manufacturer: Gebr. Becker GmbH (Made in Germany, Wuppertal) Type: SV 5.250/2-74 Serial No.: E 1264885 Airflow / Suction Capacity: 230 m³/h Suction-Side Vacuum: -300 mbar Blower Speed: 4600 RPM Drive Motor Data (VEM): Manufacturer: VEM-Antriebstechnik AG (Made in Germany) Type: KPER 100 L 2 Power: 3.0 kW (50 Hz) / 3.6 kW (60 Hz) Supply Voltage: 230/400 V (3-phase) Current Consumption: 10.7 A / 6.15 A Motor Speed: 2840–2880 RPM Protection Rating: IP55 Credpo Ahqnijfx Aiioi Features: Robust cast housing and complete unit mounted on a heavy-duty base plate Enclosed, oil-free operation providing clean air Integrated silencer unit Overall Dimensions: Width: 660 mm Depth: 425 mm Height: 500 mm

Condition: used, Elektror SD-6/S892 German Industrial Side Channel Vacuum Pump / Blower (2.3 kW, 400 V), Used Equipment Technical Data: Cjdj Ahqmdepfx Aiieri Manufacturer: Elektror Airsystems / Karl W. Müller (D-7300 Esslingen, Made in Germany) Type: SD-6 / S 892 Serial No.: 806166 Overall Dimensions (W × D × H): 400 × 460 × 430 mm Power (50 Hz): 2.3 kW (2800 RPM) Power (60 Hz): 3.1 kW (3360 RPM) Supply Voltage: 400 V (3-phase) / 220–290 V / 380–500 V Current Consumption (50 Hz): 9.2 A (Δ) / 5.3 A (Y) Maximum Pressure / Vacuum (50 Hz): 300 mbar / 300 mbar Airflow (50 Hz): 4.6 m³/min (276 m³/h) Airflow (60 Hz): 5.6 m³/min (336 m³/h) Protection Rating: IP54

Condition: new, Multichannel data logger used for real-time monitoring, recording and archiving of production process parameters (temperature, pressure, flow, level, etc.). 144x144x158. Crjde Afd Auopfx Aiisi

Condition: used, Year of construction: 2018, Channel baling press Avermann AVOS 1810 BRK-90/100, year of manufacture 2018, with cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of feed hopper: 1,800 x 1,000 mm Throughput at 35 kg/m³: 15.0 t/h Throughput at 60 kg/m³: 20.0 t/h Throughput at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, material-dependent Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Crodpfxsz H I Dxs Aiiei Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty. Our payment terms are 100% prepayment.

Condition: new, INDUVAC VACOM VC 322-710 – Industrial Side Channel Blower We offer 2 identical, brand-new INDUVAC VACOM VC 322-710 industrial side channel blowers, equipped with energy-efficient IE3 electric motors. Both units are unused and available from our warehouse in Rotterdam, the Netherlands. Suitable for industrial vacuum and pressure applications. Technical Specifications: * Manufacturer: INDUVAC * Brand / Series: VACOM * Model: VC 322-710 * Equipment type: Side Channel Blower / Regenerative Blower * Quantity available: 2 identical units * Condition: New / Unused * Motor efficiency class: IE3 * Rated motor power: 2.2 kW (50 Hz) * Motor output at 60 Hz: 2.55 kW (nameplate rating) * Electrical supply: 230 V Delta / 400 V Star (50 Hz) * Frequency: 50 / 60 Hz * Motor speed: 2,860 rpm (50 Hz) / 3,470 rpm (60 Hz) * Protection class: IP55 * Insulation class: F * Maximum pressure differential indicated: ±190 mbar (50 Hz) * Maximum pressure differential indicated: ±180 mbar (60 Hz) Csdpfx Ajz Tfvmeiisri * Motor standard: EN 60034-1 Applications: * Industrial vacuum systems * Air conveying and handling systems * Packaging and production machinery * Industrial suction and pressure applications * General industrial automation Availability: 2 identical new units available. Available individually or as a complete lot. Location: Botlek Rotterdam, the Netherlands Delivery terms: EXW (Ex Works) Worldwide shipping can be arranged upon request. Please contact us for further information or a quotation.

Condition: good (used), Year of construction: 2013, operating hours: 12,110 h, functionality: fully functional, Channel baling press Paal Konti 325 G, year of manufacture 2013 Technical data: Manufacturer Paal Type Konti 325 G Year of manufacture 2013 Crsdjz A T N Espfx Aiisi Operating hours 12,110 Pressing force 100 t Drive power 2 x 55 kW Feed opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable Tying 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Note: The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2001, operating hours: 20,900 h, functionality: fully functional, Channel baling press Paal Konti 275 D, year of manufacture 2001, with shredder and chain belt conveyor Paal KEM-1500, year of manufacture 2005 Technical data: Manufacturer Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20,900 as of 10/2026 Pressing force 75 t Total connected load 106 kW Feed opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable Tying 4-way automatic Throughput at Codpfx Aj Afwy Hsiiori 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveyor speed: 0.29 m/s Nominal width 1500 mm Axle distance 17500 mm Length of feed belt: approx. 10000 mm Length of rising section: approx. 9000 mm Gooseneck: approx. 1000 mm Inclination angle: 28° Materials: Paper, cardboard, light waste, plastic waste Note: The press is currently still in operation. Dismantling is planned for December 2026. An inspection under operating conditions is possible. The complete documentation including the CE declaration is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale is reserved and the offer can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without any guarantee or warranty.

Condition: like new (used), Year of construction: 2022, operating hours: 761 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, controller manufacturer: Makino Professional 6, controller model: FANUC FS31i-B, spindle speed (max.): 30,000 rpm, operating hours of spindle: 761 h, spindle nose: HSK-E50, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, MAKINO D200Z Makino Professional 6 (FANUC FS31i-B) Professional 6 Version X-axis 350 mm Y-axis 300 mm Z-axis 250 mm B-axis (swivel range) 180° (0° – 180°) C-axis (rotation angle) 360° continuous Distance table surface – spindle center 160 – 410 mm Table Max. load capacity 75 kg Max. workpiece size (Ø × H) 300 mm × 210 mm (with restrictions) Chuck EROWA Speed range 100 – 30,000 min⁻¹ Drive power (25 % ED / continuous) 15 kW / 11 kW Torque (25 % ED / continuous) 23.8 Nm / 21 Nm Interface HSK-E50 Csdpfx Aj Ah D Twoiisri Positioning accuracy X/Y/Z (with linear scales) ± 0.0015 mm Repeatability X/Y/Z ± 0.0010 mm Positioning accuracy B/C-axis ± 2.0 s Repeatability B-axis / C-axis ± 2.0 s / ± 1.0 s Tolerances measured at the manufacturer’s plant with appropriate foundation and daily temperature fluctuations of max. ± 1 °C. Capacity 20 tools Max. tool weight 3 kg Max. tool dimensions Ø 50 mm (without restrictions) / Ø 80 mm (with restrictions) Max. tool length 200 mm Interface HSK-E50 Connected load 40 kVA Compressed air 5 – 8 bar, max. 500 l/min 2,300 × 1,868 × 3,030 mm 4,600 kg Spindle with 30,000 rpm, HSK-E50 interface Rigid tapping Table with EROWA / System 3R chuck (DD motor), high-precision bearings Linear scales (X, Y, Z) Tool changer with 20 pockets (ATC 20), HSK interface Collision Safeguard (CSG) Robot door, loader interface (A-type) Chip conveyor with drum filter and downstream cyclone filter Flushing channel, air blower, coolant nozzles at spindle nose Fully enclosed work area, safety-guarded operator door Portable hand pendant Super GI.5 control, High-speed smooth TCP, GI-Smoothing Tool center point control (G43.4, G43.5) for simultaneous 5-axis machining 3-dimensional cutter compensation, tilted working plane Dynamic fixture compensation for rotary table, VP control Adaptive control (AC Control), energy saving function 2 GB part program memory, Data Center 1 GB, 1,000 programs Tool compensation memory: 400 offsets, type C 54 workpiece coordinate systems (6 + 48) User macro programming with 1,100 variables MRDF sensor (Machine Relocation Detection Function) EROWA Power Chuck Loader interface (A-type) instead of (L-type) Coolant temperature control unit (constant coolant temperature, with heating) Workpiece wash gun (operator side) Coolant shower Connection for oil mist extraction (Ø 125 mm) Air dryer Tool length measurement by BLUM laser, incl. tool breakage detection 3-coordinate touch probe Blum TC62 (measuring uncertainty approx. 0.005 mm, radio transmission, 14 automatic measuring cycles, incl. gauge block for C-axis pivot point) i-Set-up (additional operator panel for easy workpiece alignment) MML interface (fast Ethernet card) Network integration Remote diagnostics setup (VNC/EDM viewer, installation and training) OPC UA interface for Professional 6 (35 readable tags) Tool retract and re-approach function 3D model of the working area

Condition: used, machine/vehicle number: K10R 132, For sale is a side-channel compressor, brand Küenle, in used condition. Csdez Rpvrjpfx Aiisri

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Crjdpfx Asic Rl Deiioi Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: used, Yokogawa WT5000 Precision Power Analyzer Yokogawa WT5000-HG-F High-precision power analyzer for electrical power measurements For sale is a used Precision Power Analyzer from Yokogawa Test & Measurement Corporation. The device is suitable for highly accurate power, voltage, current, and energy analysis in development, research, testing laboratories, power electronics, drive technology, and quality assurance. Technical Data Manufacturer: Yokogawa Type: WT5000-HG-F Device Type: Precision Power Analyzer Date of Manufacture: November 14, 2024 Serial No.: T11C17539 Equipment Name: Precision Power Analyzer Model: WT5000 Suffix: -HG-F Made in Korea Measuring Element: 760903 Current Sensor Element Voltage Input: 1000 V max. Sensor Power: ±15 V DC Configuration / Modules as shown in the pictures Connections / Interfaces: Ethernet USB 3.0 USB Front Connection GP-IB / IEEE 488 Video Out / XVGA BNC Connections Ext. Clock Analog / Pulse Inputs Power Connection: 100 - 120 V / 200 - 240 V AC 50 / 60 Hz 650 VA max. Dimensions (W × H × D): approx. 430 × 221 × 550 mm Weight: approx. 18 kg Features Cedpfx Aszhl D Isiieri Large color display Touchscreen operation Front-side control buttons Multi-channel measurement system Pluggable measuring elements Current sensor element 760903 USB data interface Ethernet interface GP-IB interface Video output Power cable Accessories as shown in the pictures Applications Power measurement Energy analysis Electric motor testing Inverter testing Power electronics Battery and drive technology Automotive Research and development Testing laboratory Quality assurance Scope of Delivery Yokogawa WT5000-HG-F Precision Power Analyzer Power cable Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The table or other items shown in the photos that are not explicitly mentioned are not part of the sale. Shipping is possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by phone.

Condition: excellent (used), Price quoted per unit. Professional LeCroy 9354AL digital oscilloscope designed for advanced measurements and diagnostics of electronic circuits. The device is equipped with 4 measurement channels, a 500 MHz bandwidth, and a high sampling rate, making it suitable for research laboratories, electronics service centers, industrial automation, and R&D departments. Technical specifications: • Manufacturer: LeCroy • Model: 9354AL • Type: digital oscilloscope • Bandwidth: 500 MHz • 4 measurement channels • Sampling rate up to 2 GS/s • Acquisition memory up to 8 Mpts • BNC inputs Cedpfoz Sm Eujx Aiieri • Built-in CRT screen Condition: Used device, fully functional. The oscilloscope starts up correctly and displays waveforms. Normal signs of wear and tear are visible, resulting from use and storage. Note: One of the plastic housing elements at the back has a crack. The damage is purely cosmetic and does not affect the device's operation or performance parameters.

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, The device is complete and operational – it was previously used in conjunction with a Pitney Bowes XPV inserter. The issue that needs repair concerns only the reading function. Credpoyq Rm Uefx Aiisi

Condition: used, 4 ink trays with 22-channel control from Microcolor I unit remotely (off-press controls) Crsdev Nzrnepfx Aiiji

Year of construction: 2024, condition: used, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic Crjdpfxezf N Ncs Aiioi moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, operating pressure: 160 bar, total length: 1,310 mm, high-pressure hose length: 50,000 mm, total height: 1,030 mm, total width: 1,020 mm, type of input current: DC, empty load weight: 320 kg, input voltage: 12 V, fuel: regular/benzine 91, overall weight: 320 kg, water tank capacity: 500 l, power: 17.7 kW (24.07 HP), volume flow: 3.3 m³/h, pressure (max.): 160 bar, We are offering this like-new Dirojet Whale Built-In Plus 55/160 high-pressure cleaner, manufactured in 2024. Dimensions (L × W × H): 1310 × 1020 × 1030 mm Gross weight: 320.000 kg Net weight: 320.000 kg Serial number: 23-260 Year of manufacture: 2024 Water flow rate: 55 l/min Maximum operating pressure: 160 bar Engine power: 17.7 kW Engine power: 24 HP Engine type: Gasoline engine (Honda GX690) Voltage of the high-pressure hose reel: 12 V DC Cedpfx Aiszg Adijisri High-pressure hose length: 50 m High-pressure hose diameter: 1/2" Fill hose length: 35 m Fill hose diameter: 3/4" Water tank volume: 500 l Country of manufacture: Italy If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2011, operating hours: 23,130 h, functionality: fully functional, Baling press Macpresse MAC 105, pressing force 70 t, year of manufacture 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of manufacture: 2011 Operating hours: 23,130 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Feed opening: 1500 x 750 mm Press chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Cjdoz I Ra Espfx Aiisri Tying: 5-fold horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Hopper Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, prior sale is reserved, and it can be revoked at any time. Inspections are possible by arrangement. The sale is made with advance payment, ex works, without warranty.

Year of construction: 2005, condition: reconditioned (used), We have a Mueller Apparatebau single sheet feeder transactional channel available. Meant for feeding - reading a reading code - collating - folding A4 documents and place it into a Buhrs ITM inserter. Csdped A Ud Usfx Aiieri

Condition: used, RMS Type: SW 3009 RMS Vibration Exciter RMS Vibration Exciter SW 3009 with side-channel blower SKP49033-01/06 Type: SW 3009 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) Cjdpfxezdta As Aiieri We would be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2016, operating hours: 17,381 h, functionality: fully functional, machine/vehicle number: 500015294, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, total width: 9,152 mm, total height: 7,749 mm, total length: 38,975 mm, type of input current: three-phase, input voltage: 400 V, input current: 213 A, overall weight: 30,000 kg, pressure: 300 bar, transport height: 2,800 mm, pressure (max.): 330 bar, opening width: 970 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, control cabinet length: 3,000 mm, oil tank capacity: 2,000 l, empty load weight: 25,000 kg, operating pressure: 300 bar, transport width: 2,500 mm, transport length: 12,000 mm, input frequency: 50 Hz, Equipment: documentation/manual, We are offering for sale a HSM VK 8818 R FU channel baling press (compact in-line version) with Stadler brand conveyor in very good condition. The machine has been maintained and serviced by manufacturer HSM throughout the past 10 years. The price covers the complete equipment, exactly as shown in the pictures. Cedpfx Aij Agbq Ssijri Terms for sale: - The sale includes the complete equipment - Baling press, conveyor system, maintenance platform, wire stations, safety modules, documents, drawings, manuals - The buyer is responsible for dismantling and loading and transportation of the machine. If needed we can arrange dismantling and transport by 3rd party based on mutual agreement. - Complete service history and service reports are available for request For further information or to arrange an on site visit please contact us.