Used Cabinet Cts for sale (4,605)

Condition: used, CTS T-50/3800/I – Temperature/Battery Test Chamber Temperature range: -50 to +100 °C | 3,750 liters | water-cooled Nitrogen inertization with O2/CO monitoring and safety door locking Used temperature test chamber from CTS – Clima Temperatur Systeme GmbH. According to the previous owner, it was used for HV battery testing; suitable for temperature and material testing, environmental simulation, and quality assurance. TECHNICAL DATA Type: T-50/3800/I Temperature range: -50 to +100 °C Temperature deviation over time/space: up to ±0.5 K each Heating: approx. 4 K/min (-40 to +80 °C) Cooling: approx. 3 K/min (+85 to -40 °C) Change rates according to the manufacturer, without test specimen, measured in the supply air. REFRIGERANT Pre-cooling: R507, 6.5 kg Cooling: R23, nameplate rating 15 bar / 5 kg Both circuits: max. permissible overpressure 25 bar, test pressure 27.5 bar ELECTRICAL 400 V / 3/N / 50 Hz; rated power 20.4 kW; rated current 36.3 A On-site protection: 50 A slow-blow; protection class IP54 DIMENSIONS AND WEIGHT Test volume: 3,750 liters Internal dimensions (H × W × D): approx. 1,000 × 2,500 × 1,540 mm according to the previous owner Installation drawing: dimensions in plan view 2,840 mm; system height approx. 2,450 mm. Complete external dimensions to be confirmed. Test chamber approx. 2,700 kg; control cabinet approx. 200 kg; total approx. 2,900 kg without test specimen/additional equipment. EQUIPMENT Digital temperature control with 32-bit controller, LCD setpoint/actual value display, manual and program operation, stainless steel test chamber (1.4301), stainless steel heating element, radial fan, lockable double-leaf door, water-cooled refrigeration unit, separate control cabinet. Test chamber floor load: 500 kg. Csdpfx As Ah Si Hsiieri SAFETY AND CONNECTIONS Nitrogen inertization, O2 residual content and CO monitoring, Dräger-Polytron sensors according to the previous owner, ATEX-tested flame arrestors according to manufacturer’s documents, electromagnetic door locking, mechanical emergency opening, safety temperature limiter, overpressure switch in the refrigeration circuit, fan motor current monitoring. RS232; potential-free fault report contact. HV connections and cooling water connections for test specimens according to the previous owner. Max. heat radiation: 5,000 W at -40 °C. Cooling water: R 1 inch, approx. 2.5 m³/h at ΔT 10 K and full load. Nitrogen: R 3/4 inch, operating pressure 3–6 bar. Condensate drain: R 1 inch internal thread. Sound pressure level: below 70 dB(A) according to the manufacturer. NOTE ON BATTERY TESTING HV battery application and designation of the safety equipment as “Hazard Level 6” according to the previous owner; classification not independently confirmed. CONDITION AND SCOPE OF DELIVERY Used; optical condition according to the pictures. 1 × CTS T-50/3800/I, separate control cabinet and accessories according to the pictures. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, CTS   Type: T-30/950 Ex/I   CTS Temperature Test Chamber, Explosion-Proof   Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site control of the test item   Temperature tests:   Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate:   Heating: 2 K/min Cooling: 1.5 K/min up to -10°C   Heat radiation: approx. 1000 W at +20°C approx. 200 W at -25°C   Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is initially purged with a large volume of N2 until the oxygen content is less than 3%. After that, it switches to a base flow rate (approx. 10% of the large volume). The nitrogen flow rate of the base flow is measured, displayed, and monitored using a flow meter and limit switch. The O2 monitoring continuously extracts gas from the test chamber via a flame arrester and feeds it to an O2 sensor, which monitors the residual oxygen content of the extracted air. The gas is then passed through a second flame arrester and returned to the test chamber. The extraction pump is monitored using a volume flow meter. Further details can be found in the operating manual from Dräger in the appendix.   The gas system is currently out of operation!   The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without irradiation, and without additional equipment.   Dimensions: Test volume: 950 liters Test chamber dimensions: height approx. 700 mm / width approx. 900 mm, depth approx. 1500 mm External dimensions: height approx. 2400 mm / width approx. 1270 mm, depth approx. 3125 mm   Operating data:   Electrical connection: 400V+6/-10 %, 3/N, 50 Hz Rated power: 21.6 kW Rated current: 36.5 A   Protection class: IP 54   Condensate drain: unpressurized, R 1/2" internal thread   Sound pressure level: < 62 dB(A) Cjdpjzd Rzwofx Aiisri   (according to DIN EN ISO 3744 measured at a distance of 1 m from the front)   Weight: approx. 1500 kg, control cabinet approx. 300 kg   External refrigeration unit   Refrigerant: R404A / R23   For your security as a buyer, the following information:   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data and specifications are subject to change!)   We are happy to answer any further questions by telephone.

Condition: used, CTS Type: CS-70/900 CTS climate testing chamber with Feuchet water cooling (converted to R-452a) Temperature range: -70 °C to +180 °C Humidity range: 10–98 % RH Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet dimensions: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerant: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, rated current: 35.7 A Climate testing chamber weight: 900 kg Control cabinet weight: 150 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Crjdpfxeziizts Aiiji Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climatic Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber for performing temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climatic test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The efficient air circulation with a correspondingly high air exchange rate guarantees good heat transfer to the test specimen. The air handling unit is located on the rear of the interior chamber. The components are located in a separate frame behind the device and are easily accessible. The control system is housed in a separate control cabinet. The operating panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air using a fan.   Technical Performance Data:   Csdpfx Aijzizmnoieri Temperature Tests: Temperature range: -60 °C to +100 °C Temperature deviation: ±0.5 to 1 K over time Temperature change rate: linear, depending on the test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climatic Tests:   Temperature range: +10 °C to +90 °C Humidity range: 10 % to 95 % relative humidity in the dew point range: +5 °C to +89 °C Temperature deviation: ± 0.5 K over time Humidity deviation: ±1 to ±3 % RH over time   The technical data refers to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm External dimensions: Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class: IP 54   Technical Design:   Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by appointment (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See image)   (Changes and errors in the technical data and specifications are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously.   Device Description Cjdpfx Aiozizmboieri The climate test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The good air circulation, with a correspondingly high volume of recirculated air, guarantees good transfer to the test specimen. The air handling unit is located at the rear of the interior. The units are located behind the device in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan.   Technical Performance Data:   Temperature Tests: Temperature range -60 °C to +100 °C Temperature deviation ±0.5 to 1 K over time Temperature change rate, linear with test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climate Tests:   Temperature range +10 °C to +90 °C Humidity range 10 % to 95 % relative humidity in the dew point range +5°C to +89 °C Temperature deviation ± 0.5 K over time Humidity deviation ±1 - ±3 % r.h. over time   The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm Width: 1600 mm Depth: 1550 mm External dimensions: Height: 2800 mm Width: 2250 mm Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class IP 54   Technical Design:   Refrigeration unit water-cooled, low-noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by arrangement (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, CTS Temperature Shock Test Chamber Type: TSS-70/350-A Year of manufacture: 10/2017 Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS GmbH (Clima Temperatur Systeme), model TSS-70/350-A. The device is suitable for temperature shock tests and cyclic temperature tests in industry, research, development, and quality assurance. Areas of application: Material testing Aging tests Electronics and component testing Temperature cycling and shock tests Automotive and quality testing Technical data: Manufacturer: CTS GmbH Type: TSS-70/350-A Design: Shock test / Temperature shock test chamber Temperature ranges: Hot chamber: +50°C to +220°C Cold chamber: -70°C to +100°C Electrical data: Rated voltage: 400 V, 3/N, 50 Hz Rated power: 19.8 kW Rated current: 46.5 A Refrigeration system: Pre-cooling stage: R452A, 7.2 kg Cooling stage: R23, 2.8 kg / 11.0 bar CO₂ equivalent: 15.41 t / 41.59 t GWP: 2140 / 14800 Water-cooled Pressure data / Protection class: Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Protection class: IP 54 Equipment / Features: CTS touchscreen control panel Microprocessor-controlled regulation and monitoring system Program operation Digital setpoint and actual value display 2-zone system with hot and cold chamber Trolley system for rapid temperature shock testing Viewing window in the door Integrated control cabinet Water connections for cooling water available Technical design: Hot and cold chambers are separated Trolley system for rapid temperature change Test chamber made of stainless steel Robust industrial design Connections for cooling water supply and cooling water return available Connection type according to documents: CEE 63A Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram, piping diagram, and installation plan available Spare parts list and quick guide available For your security as a buyer: The following points can be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Optical condition see pictures Cjdpfx Ajy H Hk Asiijri Scope of delivery: CTS Temperature Shock Test Chamber TSS-70/350-A Documentation as available Note: The sale is of a used industrial device. An inspection by arrangement is possible and recommended. Loading and transport can be arranged by agreement. (Changes, prior sale, and errors in the technical data are subject to change!) We will gladly answer any further questions by telephone or message.

Condition: used, CTS   Type: CS-70/600-5/S   CTS climate testing chamber CS-70/600-5/S water-cooled version with observation window, test specimen protection and documentation   For sale is a high-quality CTS climate testing chamber, type CS-70/600-5/S for precise temperature, climate and stress screening tests in research, development, quality assurance and industry.   Crjdpfx Ajy H Hmwoiiji The device is in used condition and can be viewed in its entirety according to the images. Current display: Manual operation / Warning (sludge removal of the water bath).   Operating hours according to the display: Total operating hours: 19,788 hours Compressor cooling: 8,699 hours Compressor pre-cooling: 11,432 hours Circulation pump: 2,905 hours   Technical data:   Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Temperature change rate heating: approx. 11.95 K/min Temperature change rate cooling: approx. 5.47 K/min Test chamber volume: 600 liters   Electrical connection: 400 V 3/N 50 Hz Rated power: 18.4 kW Rated current: 30.6 A Protection class: IP 22   Refrigerant: R404A / R23 Pre-cooling stage: R404A – 5.0 kg Cooling stage: R23 – 2.1 kg / 14.5 bar CO2 equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800   Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar   Equipment / features:   Observation window in the door Stainless steel test chamber CTS touch panel / LCD control panel digital control with program operation Test specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath automatic water replenishment possible Interfaces (RS232 / Ethernet possible according to documentation) integrated control cabinet Industrial version   Pipe penetrations according to installation plan: 1x penetration DN 50 2x penetration DN 125   Test chamber dimensions according to installation plan: approx. 850 x 850 x 830 mm   External dimensions according to installation plan: approx. 1900 x 1120 x 1875 mm   Weight / mass according to documentation: approx. 750 kg   Scope of supply:   CTS climate testing chamber CS-70/600-5/S including existing documentation / test certificates Scope of supply as shown in the pictures   For your safety as a buyer: The device can be inspected by appointment. Loading with a forklift can be arranged.   For your safety as a buyer, please note the following information!   The following points can be carried out in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. Documented test run after successful inspection   Condition: used   (Subject to changes and errors in technical data!)   We will be happy to answer any further questions by telephone or message.

Condition: used, CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component testing Temperature shock and cycle temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic carriage for shock tests Technical design: Hot and cold chamber separated Carriage system for rapid temperature change Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Cedpfx Aioy Hkgbjisri Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Other data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: see pictures (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Testing Chamber Manufacturer: CTS GmbH Model: T-70/600 Machine type: Temperature testing chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature testing chamber from the year 2018. This air-cooled unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. The stainless steel test chamber has a volume of approx. 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Standalone unit, air-cooled Temperature range: -70 °C to +210 °C Temperature stability over time: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 3.5 K/min Cooling rate: approx. 3.0 K/min CE marking available Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Test chamber internal (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air with Pt100 Csdozmrmyopfx Aiisri Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door closure Movable design with rollers Test chamber and condensate drain Note: This unit is a temperature testing chamber. Humidity control is not available. Condition: Used Optical condition according to pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature testing chamber Accessories as shown in the pictures The table shown in the photos as well as other items not explicitly mentioned are not included in the sale. Shipping via freight forwarder is possible. Loading with a forklift is possible. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Test Chamber Manufacturer: CTS GmbH Model: T-70/600 Year of manufacture: 10/2018 Machine type: Temperature test chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature test chamber from 2018. This air-cooled, stand-alone unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, and development and stress tests. The stainless steel test chamber has a volume of approximately 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Stand-alone unit, air-cooled Temperature range: -70 °C to +210 °C Temporal temperature stability: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 4.03 K/min Cooling rate: approx. 3.17 K/min CE marking present Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating pressure PS: 25 bar Test pressure PT: 27.5 bar Crodozmqx Ispfx Aiioi Dimensions and weight: Internal test chamber (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air using Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door latch Mobile design with rollers Test chamber and condensate drain Workshop inspection: Functional test performed Electrical connection and phase sequence tested Heating and cooling function tested Speed test performed LAN communication and buffer battery tested Inspection seal applied Note: This unit is a temperature test chamber. Humidity control is not available. Condition: Used Optical condition as shown in the pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature test chamber Operating manual and technical documentation Test and workshop documents Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder possible. Loading possible with a forklift. Subject to changes, errors and prior sale.

Condition: like new (used), CTS 2,500 L Vertical Vat / Mixer with Double Jacket and Agitator – Stainless Steel Industrial vat / vertical mixer CTS with a capacity of 2,500 liters, equipped with a double jacket for thermal treatment and an agitation system, designed for the preparation, mixing, heating, and homogenization of food products in industrial batch processes. The equipment combines a large-capacity vertical vessel with a motorized agitator and a double jacket, allowing mixing and thermal treatment operations to be performed on the product in a single unit. Its 2,500-liter capacity, stainless steel construction, and bottom discharge make it a particularly interesting solution for plants that process large volumes of product. MAIN FEATURES -Manufacturer: CTS -Capacity: 2,500 liters -Type: Industrial vertical vat / pot / mixer -Vertical configuration -Double jacket for thermal treatment -Integrated agitation system -Agitator with motorized drive -Mixing and homogenization of product -Stainless steel construction -Large-capacity vessel -Curved bottom -Bottom product discharge -Discharge valve -Robust support structure -Integrated control panel -Designed for industrial batch processing -Integrable into food production lines PROCESS The 2,500 L CTS is designed to receive the ingredients and mix them using the internal agitation system. The double jacket allows for the thermal exchange necessary to heat or maintain the product temperature, depending on the conditions and services available in the installation. The agitator keeps the product moving during the process, promoting uniform distribution of the ingredients and temperature. Once the cycle is complete, the product can be discharged through the outlet located at the bottom. It can be used for the following operations: Mixing and homogenization Heating Crjdpfxszbi Rme Aiioi Cooking, depending on the process Temperature maintenance Formulation preparation Dissolution and incorporation of ingredients Preparation of sauces, creams, and purees APPLICATIONS Particularly suitable for canning industries, sauce manufacturers, prepared meal producers, vegetable product manufacturers, puree, cream, and filling manufacturers, and other food industries that require a large-capacity processing vessel with agitation and thermal treatment. The combination of 2,500 liters, double jacket, agitator, and stainless steel construction provides a versatile solution for industrial preparation and mixing processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, CTS Type: CW-40/16 CTS Climate Chamber, Climate Testing Cell, Water-Cooled Height-adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 Test chamber approx. (W x D x H): 2500 x 2720 x 2200 Test chamber volume: 14960 liters Temperature range: -40°C to +140°C Temperature deviation 1 K over time Average temperature change rate without heat radiation, measured in the supply air Heating: 2 K/min Cooling: 1 K/min from +110 °C to -35 °C Climate tests: Temperature range: +10 °C to +90 °C Humidity range: +30% to +95% RH in the dew point range: +5°C to 89°C Temperature deviation 0.5 K over time Humidity deviation ±1 - ±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Rated power: 53.5 KW Rated current: 92.3 A Compressor: S6J-16.2 Refrigerant: R404A Weight: 5500 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Crodpfx Aozd R A Ujiioi We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, total length: 23,700 mm, type of input current: AC, Equipment: documentation/manual, Glass tempering furnace TAMGLASS / Glaston, ProConvection-2448-CTS-20-R 3,8 – 19 mm, 2400 x 4800 mm, Right – Left. Year: 2005. With convection (Low-E glass). Noise reduction cabin included. 400 V, 50 Hz, total power: 1747 kW (heating 1100 kW, motors 647 kW) In good technical condition. Inspection during production is possible by appointment. Available: DECEMBER 2026 Csdpfe Agwh Iex Aiisri

Condition: used, Description: CTS climate test chamber CW-60/6 -60°C to +120°C 6,000 liters (6 m³) Temperature range: -60 °C to +120 °C Temperature deviation: ±0.5 to 1 K over time Codpfoygr E Rox Aiiori Heating: 1 K/min from -40 °C to +80 °C Cooling: 1 K/min from +80 °C to -40 °C Temperature range: +10 °C to +95 °C Humidity range: 10% to 85% relative humidity In dew point range: +5°C to +89°C Temperature deviation: ±0.5 K over time Humidity deviation: ±1 to ±3% r.h. over time Dimensions: Internal dimensions: Volume: approx. 6,000 liters (6 m³) Approx. internal dimensions: Height: 2,000 mm, Width: 2,000 mm, Depth: 1,500 mm

Condition: used, CTS Type: CS-70/350 Water-cooled Test chamber volume: 350 liters Test chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature operating range: Temperature range: -70°C / +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH Cedjziyw Ejpfx Aiisri Max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by phone.

Condition: used, CTS   Type: T-40/600 /011232   CTS Temperature Testing Chamber, Water-Cooled   Including metal supports to increase the floor load capacity   Test chamber volume: 600 liters   Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm   External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm   Temperature operating range:   Temperature range -40 to +180°C   Temperature deviation ±0.1 to ±0.3 K over time   Heating rate: 2.5 K/min Crjdpfxeziyw Ss Aiiji Cooling rate: 3 K/min   Electrical connection 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R404A   Weight: 550 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data and specifications are subject to change!)   We will gladly answer any further questions you may have by telephone.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, the laminar flow cabinet was located in a cleanroom. Model Parameters BBS-H1300 BBS-H1800 Cedpfszia Idjx Aiisri External dimensions (W*D*H) 1300*820*2040 mm 1800*820*2070 mm Power supply AC 220V±10% AC 110V±10% Frequency 50 Hz 60Hz Power consumption 400W 500 W Airflow velocity 0.3～0.5m/s UV lamp power consumption 30W*1 30W*1 Fluorescent lamp power consumption 12W (LED)*1 16W (LED)*2 HEPA filter 99.999% efficiency at 0.3 µm Noise ≤65dB

Condition: ready for operation (used), Year of construction: 2000, operating hours: 89,307 h, functionality: fully functional, machine/vehicle number: 01180001051, For sale is a powerful and reliable Gildemeister CTX 500E CNC universal lathe in good condition. Thanks to its stable inclined bed design, the machine offers maximum rigidity and excellent precision when machining medium to large workpieces. The machine can be inspected while powered on, by arrangement. Equipment: - Heidenhain control - Single spindle - Three-jaw chuck - 11-position tool turret (partially with driven tools) - Automatic tailstock - Chip conveyor Accessories: - Workbench (4 drawers, 1 door) - Telescopic drawer cabinet Contents: Hand tools, analog/digital measuring instruments Attractive offer – flexible & hassle-free We offer you not only a high-quality product, but also tailored financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. Cjdpfxs Afph No Aiijri If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes and errors!

Condition: used, This listing is for the Walker Class 11 Biological Safety Cabinet Crodpfx Aiexhfr Eoioi The unit is in full working condition and is ready for immediate use A Walker Biological Safety Cabinet is a type of biosafety cabinet (BSC) designed and manufactured by Walker, a company that specializes in laboratory containment equipment. These cabinets are used in laboratories to provide a controlled, contaminant-free environment for handling potentially hazardous biological materials. What Is a Biological Safety Cabinet? A Biological Safety Cabinet (BSC) is an enclosed, ventilated laboratory workspace designed to: Protect the user from exposure to biohazards, Protect the experiment or product from contamination, Prevent environmental contamination. They achieve this through HEPA (High-Efficiency Particulate Air) filtration and controlled airflow systems. Walker Biological Safety Cabinet – Key Features HEPA-filtered airflow: Removes airborne particles and microorganisms. Laminar airflow: Provides a clean work area by maintaining unidirectional air movement. Front access sash: Allows operator access while maintaining airflow barrier. UV light for sterilization when not in use. Ergonomic design: For user comfort during long procedures.

Condition: like new (used), Year of construction: 2012, Apfel – Tool cabinet with four drawers suitable for long tools / reamers & deep-hole drills, etc. - Year of manufacture: 2012 - 3 x drawers, each 180 mm wide / load capacity 900 kg each - 1 x drawer, 300 mm wide / load capacity 1800 kg - Overall height: 2140 mm - Cabinet dimensions (W x H x D): 1040 x 2140 x 1300 mm - Empty weight: approx. 450 kg Errors and omissions excepted. Crodpfs Afdgtex Aiioi

Condition: used, CTS Climate testing chamber / Shaker chamber CTS TV-70/530 Climate testing chamber Climate testing chamber for combined temperature and vibration testing A used climate testing chamber from the manufacturer CTS Clima Temperatur Systeme GmbH is for sale. The system was developed for combined climate and vibration tests and is suitable for environmental simulation, material testing, electronics testing, quality assurance, as well as development and endurance tests. Shaker/vibration exciter is not included in the offer! Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TV-70/530 Equipment type: Climate testing chamber / Shaker chamber Test chamber volume: approx. 530 liters Test chamber dimensions: approx. 850 x 730 x 860 mm (W x D x H) External dimensions: approx. 1450 x 2250 x 2000 mm (W x D x H) Weight: approx. 1,200 kg Temperature range: -70 °C to +180 °C Heating rate: approx. 5 K/min Cooling rate: approx. 5 K/min Refrigerant: R404A / R23 Rated power: 16 kW Rated current: 29.1 A Equipment Shaker chamber for combined tests Test chamber prepared for vibration applications Cascade refrigeration system Temperature testing Accessories as shown in the pictures Application areas Temperature testing Combined climate and vibration testing Environmental simulation Electronics testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x CTS TV-70/530 Climate testing chamber Scope of supply as shown in the pictures Shaker/vibration exciter is not included in the offer. Cedpfxozd Uq As Aiisri Items, machines or other accessories shown in the pictures that are not explicitly described are not included in the scope of supply. (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Testing System CSR-60/810/S | -60 °C to +170 °C 39.6 kW | Test chamber 1200 L Description: For sale is a professional climate and temperature testing system from CTS GmbH, consisting of a CSR-60/810/S type conditioning unit and an external test chamber (1200 liters). The system is ideally suited for industrial, development, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations over an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, consisting of: Conditioning unit (CSR-60/810/S) External test chamber (Test chamber 1200 L) The system is designed to supply external test rooms or test chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, lifetime testing). Technical data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of construction: Temperature & Climate Temperature range: -60 °C to +170 °C Humidity range: 10 % to 80 % RH Dew point range: +5 °C to +74 °C Electrical data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse: 80 A slow-blow Connection type: Fixed connection Refrigeration system Refrigerant: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) Csdpfxszimgae Aiisri (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal supports to increase the floor load capacity Codozh Htwjpfx Aiisri Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: T-70/600/S Water-cooled temperature testing chamber Crodpfx Aiozg Ty Ieiei Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for external control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Refrigerant: R404A / R23 Weight approx. 700 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Codezh D E Ropfx Aiiori Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.