Used Products for sale (17,240)

Condition: excellent (used), Year of construction: 1988, Tank with agitator, double-walled stainless steel construction, available in 700 and 1000 liter sizes, in excellent condition, fully functional. Hsdpfoz Syw Nox Ag Ejfn

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 PAPER MACHINE + STOCK PREPARATION / DEINKING PLANT + GOEBEL U16M !contact for full details and photos! Package sale of an integrated paper production installation in Hainsberg, Germany. The package includes the PM 5 paper machine, its associated stock preparation and deinking plant, and a Goebel U16M roll slitter rewinder. PM 5 was originally built in 1985 and modernised several times. Main sections: approach-flow system – PAMA; headbox – Voith; Fourdrinier section – PAMA; top-wire former – Valmet; press section – PAMA; dryer sections – PAMA; SpeedFlow system – Voith; after-dryer section, calender and Pope reel – PAMA. Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion/modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications: • Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm • Maximum speed: up to 600 m/min • Maximum gross capacity: up to 150 tonnes/day • Basis-weight range: approx. 45–130 g/m² • Grades produced include office, copy, writing, printing, envelope and newsprint papers • Installed electrical power: approx. 2.5 MW • Steam consumption: up to approx. 16 tonnes/hour Stock preparation/deinking plant: • Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions • Essential components listed in the available technical documentation are reported to remain installed on site Hfsdpfez Hvmhex Ag Een • Older Siemens S5 and Teleperm control and automation system Goebel U16M: built in 2005, machine no. 053-9031. Working width 2,800 mm; maximum speed 2,000 m/min; maximum unwind diameter 2,000 mm; maximum rewind diameter 1,500 mm; minimum cutting width 150 mm. Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator. Operating status: Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults Maximum capacities depend on paper grade, raw material and operating conditions. Inspection by appointment. Price on request.

Condition: used, Year of construction: 2023, machine/vehicle number: 230804/9440, overall weight: 133 kg, total width: 697 mm, total length: 1,210 mm, total height: 1,350 mm, input voltage: 240 V, tank capacity: 200 l, input current: 13 A, input frequency: 50 Hz, Equipment: type plate available, Freddy ECOVAC 200 industrial coolant vacuum and recycling unit, manufactured in 2023 by Freddy Products Limited, United Kingdom. The Freddy ECOVAC is designed for vacuuming coolant from machine tool sumps, machine beds, drip trays, conveyors, and shop floors, while simultaneously separating metal chips and swarf and returning the cleaned coolant for reuse. Unlike a standard industrial vacuum cleaner, the ECOVAC is specifically designed for coolant recovery and recycling and uses an independent pump for coolant return. Technical data: Manufacturer: Freddy Products Limited Model: ECOVAC 200 Year of manufacture: 2023 Serial number: 230804/9440 Tank capacity: 200 liters Power: 3 kW Voltage: 240 V Power supply: single-phase Frequency: 50/60 Hz Input current: 13 A Empty weight: approx. 133 kg Dimensions: - Length: approx. 1,210 mm - Width: approx. 697 mm - Height: approx. 1,350 mm Country of manufacture: United Kingdom CE marked UKCA marked Equipment and features: Hedpfx Asz Dx Tleg Ejfn - 200-liter coolant tank - independent coolant return pump - 37-liter perforated steel basket - flexible suction hose - metal suction lance - wide floor suction nozzle - additional tools and hoses - mobile design with castor wheels - steel construction with oil- and acid-resistant powder coating Main applications: - CNC machining centers - lathes and milling machines - machine tool coolant sumps - production plants - maintenance departments - industrial workshops Advantages: - recovers and reuses coolant - helps reduce coolant consumption - removes chips and swarf from coolant - helps extend coolant life - reduces waste disposal costs - improves machine and workplace cleanliness - helps reduce bacterial growth and contamination in coolant systems Condition: Used machine in very good technical and visual condition. The unit is complete and ready for use. Inspection and functional test are possible before purchase. Sales information: VAT invoice available. Transport can be arranged throughout Poland and Europe after prior agreement. Additional photos, video, and transport quotation are available upon request.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Process Flow Continuous feeding of copper wire via an automatic double unwinder with flying splice capability Inductive wire preheating for moisture removal and improved adhesion Full insulation using a Rosendahl Automotive main extruder and a highly precise crosshead die Cooling and extraction Multi-stage, temperature-controlled telescopic water cooling trough for stress-free solidification of the plastic Synchronized precision caterpillar puller for consistent line speed Quality assurance and winding Laser diameter and ovality measurement Eccentricity measurement for monitoring consistent wall thickness High-voltage spark tester for real-time fault detection Uninterrupted winding onto process drums MACHINE DETAILS Machine type: High-speed full insulation line Design: Fully automatic system for thin-walled vehicle lines Year of manufacture: 2020 EQUIPMENT Automatic double unwinder with flying splice capability Inductive wire preheating Rosendahl Automotive main extruder Highly precise crosshead die Temperature-controlled telescopic water cooling trough Hfsdjz N A Npspfx Ag Een Precision caterpillar puller Laser diameter and ovality measurement Eccentricity measurement High-voltage spark tester Automatic double spool winder

Condition: like new (used), Year of construction: 2020, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: XZHGB50-12050, Equipment: documentation/manual, Professional Offering: Complete and Unique Egg Tray Production Line in Hungary We are offering for sale a complete and unique, turnkey production line located in Hungary. Capacity & Scope: The production line manufactures 10-egg cartons, suitable for both continuous and customized shift operations. We offer a complete, integrated system ranging from raw material preparation to final product delivery. Location & Infrastructure: The production line is located in Bátonyterenye, Hungary, within an industrial zone that provides the full infrastructure necessary for manufacturing operations. Hodpfx Agjya Eh Eo Eofn Market Potential: The entire output generated by this production line is currently distributed within the domestic market. System Components: The complete egg carton production line consists of the following modular units: Raw Material Preparation System: Processes waste paper into a moldable pulp suspension. HGHY Egg Carton Forming Unit: Finalizes the product shape through molding, followed by drying and hot-press thermal treatment. Palletizing System: Prepares the finished cartons for safe transportation and logistics. Auxiliary Infrastructure Systems: Comprehensive supply systems for compressed air, vacuum, power, gas, and water.

Condition: used, Year of construction: 2021, machine/vehicle number: 211014/8655, overall weight: 133 kg, total width: 697 mm, total length: 1,210 mm, total height: 1,350 mm, input voltage: 240 V, tank capacity: 200 l, input current: 12 A, input frequency: 60 Hz, Equipment: type plate available, Freddy ECOVAC 200 industrial coolant vacuum and recycling unit, manufactured in 2023 by Freddy Products Limited, United Kingdom. The Freddy ECOVAC is designed for vacuuming coolant from machine tool sumps, machine beds, drip trays, conveyors, and shop floors, while simultaneously separating metal chips and swarf and returning the cleaned coolant for reuse. Unlike a standard industrial vacuum cleaner, the ECOVAC is specifically designed for coolant recovery and recycling and uses an independent pump for coolant return. Technical data: Manufacturer: Freddy Products Limited Model: ECOVAC 200 Year of manufacture: 2023 Serial number: 230804/9440 Tank capacity: 200 liters Power: 3 kW Voltage: 240 V Power supply: single-phase Frequency: 50/60 Hz Input current: 13 A Empty weight: approx. 133 kg Dimensions: - Length: approx. 1,210 mm - Width: approx. 697 mm - Height: approx. 1,350 mm Country of manufacture: United Kingdom CE marked UKCA marked Equipment and features: - 200-liter coolant tank - independent coolant return pump - 37-liter perforated steel basket - flexible suction hose - metal suction lance Hfodpfxjz Dx Trs Ag Een - wide floor suction nozzle - additional tools and hoses - mobile design with castor wheels - steel construction with oil- and acid-resistant powder coating Main applications: - CNC machining centers - lathes and milling machines - machine tool coolant sumps - production plants - maintenance departments - industrial workshops Advantages: - recovers and reuses coolant - helps reduce coolant consumption - removes chips and swarf from coolant - helps extend coolant life - reduces waste disposal costs - improves machine and workplace cleanliness - helps reduce bacterial growth and contamination in coolant systems Condition: Used machine in very good technical and visual condition. The unit is complete and ready for use. Inspection and functional test are possible before purchase. Sales information: VAT invoice available. Transport can be arranged throughout Poland and Europe after prior agreement. Additional photos, video, and transport quotation are available upon request.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. Production line units: 1. Zhejiang Baina 150 20D 1000Kg/h cold feed vacuum extruder (Standard) 2. Zhejiang Baina EJ-PPF-150-04-00 conical die (Pneumatic) 3. Zhejiang Baina 6m infrared curing oven (width 1000mm) 4. Zhejiang Baina 6m hot air curing oven (width 1140mm) 5. Zhejiang Baina 6m hot air curing oven (width 1440mm) 6. Zhejiang Baina 6m hot air curing oven (width 1600mm) 7. Zhejiang Baina 6m hot air curing oven (width 1800mm) 8. Zhejiang Baina 6m hot air curing oven (width 2000mm) 9. Zhejiang Baina 6m hot air curing oven (width 2300mm) 10. Zhejiang Baina 6m hot air curing oven (width 2500mm) 11. Zhejiang Baina 6m hot air curing oven (width 2800mm) 12. Zhejiang Baina 36M FF-SLX-02-00 (3 layers * 12m) cooling system Hjdpfx Agoy Exrps Eofn 13. PCM automatic longitudinal and transverse industrial cutting machine 2000mm 14. AC-15AD liquid chiller with 285 liters water tank If you are interested, we will send you a detailed description and data.

Condition: ready for operation (used), Year of construction: 2012, complete production line from SCM Technical details: Workpiece length 250 - 3,100 mm Productivity 180 parts/shift Feed rate, continuously adjustable, max. 20 m/min Automatic central lubrication system CE conformity marking 2 slot spindles with HSK85 tool holders 2 profiling spindles, right, with HSK85 tool holders 2 profiling spindles, left, with HSK85 tool holders 3 spindles, horizontal 8 tool changers, 96 positions Space requirement approx. 30,000 x 15,000 mm Equipment of the system: 1 - Transverse conveyor SCM for feeding the planing machine 2 - Planing machine Superset NT 31 3 - Transverse conveyor SCM to the double-end profiler 4 - Double-end profiler SCM Multiten D 5 - Transverse conveyor SCM to the drilling machine Hfsdpfxsz D R S To Ag Een 6 - Drilling machine SCM Fleximat 7 - Double-angle transfer with transverse buffer SCM TA 1/1 8 - Drilling machine SCM Fleximat 9 - Double-angle transfer with transverse buffer SCM 10 - Longitudinal conveyors 11 - Profiling machine SCM Winprof R 12 - Transverse conveyor SCM 13 - Profiling machine SCM Winprof L 14 - Transverse conveyor at the outfeed SCM

Condition: excellent (used), Year of construction: 1992, Complete production line Omag Tronic 140/120 - Siemens S5 - elevator - lowerator - finger car - cuber - foiling device Messersi 2011 - washing device Schindler 2007 - 15 moulds Hfedpfxez Ngzis Ag Een - 3000 production boards 1400/1150 - double mixing plant Skako 2250l + 750l with skips, cement weights, flying bucket, color mix

Year of construction: 1980, condition: used, Rolling mill in working condition, designed for the production of hot-rolled metal products: reinforcing bars, rounds, squares, angles, flats, channels, and beams. Maximum initial blank diameter: 180 mm. It consists of a three-roll roughing stand with a diameter of 600 mm and five finishing stands with a diameter of 320 mm, as well as a calibrating three-roll stand with a diameter of 320 mm. Hfsdpfoz Eq Nuex Ag Eon High productivity. Cantilever-type rolling rolls are used. They are inexpensive to manufacture and can be quickly replaced when switching from one type of rolled product to another. Location: Ukraine, Sumy. Dismantling and loading are included in the price.

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: PAM8025B, This membrane Nitrogen Generator was removed by a factory 3 years ago and by that time it was fully functional. After this is stored. Hfjdsy R Sixjpfx Ag Ejn

Condition: used, Year of construction: 2003, functionality: unexamined, This membrane Nitrogen generator was removed from a factory 3 years ago . By the time it was removed it was functional. after this is stored. Hodoy R Sg Rspfx Ag Ejfn

Year of construction: 2019, operating hours: 5,600 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: DRPL/LP29, Equipment: CE marking, PELLET PRODUCTION LINE – COMERC – CAPACITY 2 T/H Pellet production line with a capacity of 2 t/h, line length 25 m. Raw material: sawdust (spruce, pine, larch). Operating hours: 5600 h. The complete line includes: Sawdust hopper – 80 m³ Screw conveyor from the hopper – length 6 m Sawdust bucket elevator – length 7 m Buffer tank – 1 m³ for the humidification station Humidification and moisture stabilization station Sawdust bucket elevator – length 7 m Granulator buffer tank – 1.5 m³ Screw conveyor to the granulator – length 2 m RMP 520 Munch granulator Acid-resistant bucket elevator – length 8.5 m Gallen Cuntelfloor pellet cooler Pellet sifter Bucket elevator – length 8.5 m Finished pellet storage tank – 3 t Manual bagging machine – 2–3 people, up to 20 t/shift JKF 15 kW fan for aspiration Aspiration system – extraction from the entire line Cyclone – diameter 1 m Control cabinets – complete Control, measurement and actuation equipment, moisture sensors (2 units) Explosion-proof early spark detection and extinguishing system Visual process overview to be implemented along with the control panel Installed power 217 kW Hfsdpjz Hw Umefx Ag Ejn We can send more photos and specifications to interested parties via email. The line is in working condition. Disassembly of the line is the responsibility of the seller. Collection and transportation of the machine is the responsibility of the buyer. We also offer assistance with reassembly, commissioning, and service support. On-site inspection is possible.

Year of construction: 2018, operating hours: 350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SPZ6M, COMPLETE EPS PRODUCTION LINE – FANGYUAN / ICI SIXEN – 2018 Complete EPS production installation suitable for moulded EPS products, including pre-expansion, shape moulding, insert/in-mould capability, storage silos, cooling-water system and steam-generation equipment. The line was purchased new in 2018 and has had relatively limited use. It is currently installed and can be inspected before dismantling. MAIN EQUIPMENT INCLUDED FANGYUAN SPJ90A BATCH PRE-EXPANDER Automatic batch EPS pre-expander with density control, dryer and conveying system. • Expansion chamber: Ø900 mm • Density range: approx. 12–90 g/l • Capacity: up to approx. 720 kg/h depending on density • Steam pressure: 0.6–0.8 MPa • Connected load: 16.75 kW • Typical cycle: approx. 60–70 sec • Suitable for white and grey EPS • Approx. 16,000 kg total EPS processed • Approx. 800 production cycles FANGYUAN SPZ6M AUTOMATIC SHAPE MOULDING MACHINE Special configuration for moulded products with inserts / in-mould applications. • 6 positions per cycle • Twin steam chamber • Moving twin mould system • In-mould capability • Maximum moulding area: 720 × 1270 mm • Max. individual position: 330 × 250 mm for 6 positions • Max. depth: 180 mm Hfsdpfx Agoz A Dxkj Ejn • Cycle time: approx. 100–150 sec • Connected load: 13.5 kW • Machine weight: approx. 6,000 kg • Overall dimensions: approx. 5000 × 5100 × 3700 mm • Schneider touchscreen / Mitsubishi PLC • Approx. 350 total operating hours FANGYUAN SPZ80K AUTOMATIC EPS SHAPE MOULDING MACHINE WITH VACUUM Originally supplied as SPZ900K. • Moulding area: 840 × 720 mm • Up to 4 individual mould positions • Steam pressure: 6–8 bar • Steam consumption: approx. 6 kg/cycle • Compressed air: 1.2 m³/cycle • Cooling water: 40–120 L/cycle • Connected load: 10.6 kW • Approx. dimensions: 4500 × 1640 × 2700 mm • Approx. weight: 4,000 kg • Approx. 53,300 recorded machine cycles EPS STORAGE SYSTEM • 6 × approx. 25 m³ silos • Approx. 150 m³ total storage capacity COOLING-WATER SYSTEM • Cooling tower approx. 100 m³/h • 1 low-pressure + 2 high-pressure pumps • Fangyuan DN150 stainless-steel water filter STEAM-GENERATION SYSTEM A complete European steam-generation system is potentially available with the installation, including ICI SIXEN 500 kg/h steam generator, Riello natural-gas burner and related auxiliaries. The exact steam-system scope included in the final sale can be agreed with the buyer, as some components may be retained depending on the final configuration. OTHER INFORMATION • Year: 2018 • CE equipment • Manuals and technical documentation available • Photos and videos available • Inspection possible before dismantling • Preference for sale as a complete line • Dismantling, loading, transport and reinstallation can be discussed separately • Moulds are not included unless specifically agreed A detailed PDF with the complete technical description and equipment specification has been uploaded in the Documents section of this listing. Estimated equivalent replacement cost today: approximately EUR 330,000–380,000

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Paper cup machine Mold installed 6OZ-vending Max. speed 50 cup/min Hfedpfxoz Rzb Ho Ag Ejn Production speed 40 cup/min New digital ultrasonic installed 2025 In fully working condition. Price EXW=additional cost for packaging, loading and transport cost's,

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Equipment: * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 * Rotary screen systems with conveyor belts * Big bag system and semi-automatic bagging system Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW Hfodpfx Aezhbf Ieg Ejn * Required fuse rating: 500 A / 400 V * Production capacity during test run: approx. 460 kg/h * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request.

Condition: excellent (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, total length: 40,000 mm, total width: 4,000 mm, total height: 4,500 mm, working height: 2,500 mm, input voltage: 400 V, overall weight: 48,000 kg, type of input current: three-phase, Equipment: documentation/manual, Complete line for the production of single and double-pane insulated glass units, including: Automatic bending machine for frames FB-H PC system Automatic spacer filling machine DF-R-V Automatic insulated glass production line IGL-G-H2 (with automatic argon filling at a minimum level of 90%) Automatic sealing robot (two components) ASR-H2.5 Butyl applicator BE-A Rotating table RT-A Frame transporter Technical data: 1) Power supply: AC380V, 50Hz, approximately 45KW 2) Air pressure: 0.6~0.7MPa 3) Dimensions: 33250(L)×3000(W)×3000(H)mm 4) Max. load: insulated glass unit approximately 850kg, suction side approximately 400kg 5) Min. glass size: 450×350mm Hfjdpfxsz Ihhts Ag Eon 6) Max. glass size: 5000×2500mm 7) Insulated glass unit thickness: 14~70mm 8) Working height: 530±30mm 9) Transporter speed: 35m/min 10) Inclination angle: 6°~8° 11) Glass thickness: 4-15mm 12) Bristle diameter: 0.12mm 13) Max. washing speed: 0-10m/min adjustable 14) Average expected output: 1 m2 (1000x1000mm) of rectangular insulated glass units with the configuration (6mm+9A+6mm), for example, approximately 550 units per 8 hours with automatic gas filling, approximately 650 units per 8 hours without gas, for single-pane units (depending on the current factory situation and employee efficiency).

Condition: good (used), functionality: fully functional, Petsmo (Finland) Titan breaker. Can include dolav box tipper as shown. Capable of running at 15-30 tonnes per hour depending upon material. Hfodpfxjzx Icbs Ag Esn

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Complete MECATHERM line from 2011, consisting of an H1 volumetric divider and an RT2 shaping unit with an integrated pre-fermentation and resting system. Industrial line designed for the automated production of baguettes, long loaves, and other bakery products, depending on the shaping equipment used. Line composition: - MECATHERM H1 volumetric divider - Complete MECATHERM RT2 shaping unit - Integrated pre-fermentation and dough resting system - Shaping and elongation system - Automatic depositing system onto trays - Several additional shaping accessories and equipment - Conveyors and connecting equipment Features: - Manufacturer: MECATHERM - Year: 2011 - H1 divider capacity: up to 2,500 pieces/hour, depending on the weight Hfodpfx Ajz Sfa Dog Ejn - Production adapted for baguettes and various loaf sizes - Automated line from dividing to depositing onto trays Complete line sold with numerous accessories. Additional information and video available upon request.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Equipment: rotational speed infinitely variable, For sale is a window manufacturing system, UC Matic 15, from Weinig, consisting of the following main components: - Infeed mechanism - CNC machining center Unirex 2000 - CNC end machining system Unitec 15 - CNC length profiling machine Unicontrol 12 Hfsdox Sqxhjpfx Ag Ejn - Automatic double-part turning and return system - Outfeed buffer The system is designed as a continuous manufacturing system for window and profile processing and enables efficient and flexible production. The machines will be disassembled by a specialized company. The costs for this will be disclosed and are to be borne by the buyer.

Condition: used, Freshline freezer MP Type IQF 1220.15/3070 suitable for nitrogen Hfodpfx Aoz E H Ndsg Eon all stainless steel product height: max. ± 100 mm capacity: ± 5.000 kg / h product load (kg/running meter): ± 13-14 kg / running meter 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatic: 1Nm3/h at 5-7barg LIN pressure nitrogen 3barg net belt width ± 1.220 mm net belt length ± 16.800 mm dimensions (l x w x h) : ± 17.700 x 2.600 x 2.600 mm (max open) in very good condition

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 3560.12.06, total height: 1,800 mm, total width: 1,000 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 700 kg, input voltage: 380 V, control voltage: 24 V, warranty duration: 6 months, input current: 16 A, input frequency: 50 Hz, EVO 1800 BOTTLE LABELING MACHINE BY MECAMARC Intermittent motion machine – from 800 to 1800 bottles/hour depending on the selected configuration. We offer this MECAMARC EVO 1800 labeling machine, an intermittent motion labeling machine, ideal for professionals seeking a reliable and high-performance solution for their packaging operations. Features and benefits: • Brand: MECAMARC • Model: EVO 1800 • Year: 2012 • Type: Intermittent motion labeling machine 3 labeling stations (label, back label, and neck label) Multi-format screw with a diameter of 60 to 100 For further information, technical specifications, or to arrange a visit, please do not hesitate to contact us. Hodpfxjz Sn Dqe Ag Esfn Availability and information upon request.

Condition: used, functionality: fully functional, total width: 8,000 mm, total height: 4,000 mm, total length: 70,000 mm, Pallet production line, Terwort, 17 seconds/pallet, completely modernized in 2023 Kallfass block saw Block switch Block buffer Terwort NM1 nailing machine Deck storage Deck gripper Storage Hjdszp El Uepfx Ag Esfn 2 x star turners Terwort NM2 nailing machine Skid milling machine Clamping device Miter saw Branding station Forklift Outfeed conveyor

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, STORTI FLEX + GSI 150 Automatic Pallet Nailing Line (Robotics and High Production) GENERAL DESCRIPTION: A complete, highly automated industrial installation for manufacturing wooden pallets and pallet tops is available for sale. The line combines the structural and hydraulic robustness of STORTI S.p.A. with modern technological and robotic upgrades. The facility is currently fully operational, having recently undergone a comprehensive overhaul and critical maintenance procedures. TECHNICAL SPECIFICATIONS AND COMPONENTS: The line features an advanced, fully interconnected modular architecture: Module / System Technical Model Key Features Year Central Mechanical Nailer STORTI FLEX 50M High-speed, heavy-duty monoblock gantry. 9 independent nailing heads, brushless synchronous servomotors, and a multi-format oscillating hopper. 2014 Robotic Cell Hjdpez Sfbnofx Ag Eofn ROBOT WORK-STATION 2-axis robotic station for handling and pneumatic 90° rotation of pallet tops/decks. 2014 Cartesian Robots 3 Units Integrated Cartesian systems for workflow automation. 2014 Hydraulic Nailer STORTI GSI / 150-TA Heavy-duty assembly core. Equipped with 24 nailing heads, a frame with multi-format molds (7 molds), and an 11 kW hydraulic power unit (60-65 bar). 2004-2006 Block Dispenser STORTI DAT / 2000 Automatic block/stringer feeder using a high-friction belt and pneumatic actuators. 2004-2006 Outfeed Mechanization – MODULE 7 (Storti) Finishing line including: Corner cutter (GSM/3), board milling machine, marker/stamper, pallet turner (GSA/180), and automatic stacker (AGS/230). Transfer Units STORTI GSD 4 FLEX Angular transfer unit featuring rollers and lifting chains. • Format Capacity: From a minimum of 700 x 700 mm to a maximum of 1500 x 1500 mm. • Electronics and Control: Centralized via HMI touchscreens (Schneider Electric Magelis / ESA VT100) and Schneider Lexium servo-drive technology using the CANopen protocol. RECENT MAINTENANCE HISTORY The machine is in excellent condition thanks to a comprehensive overhaul that includes: • Replacement of the gantry servo-motor cable. • Replacement of alignment bushings on the Flex 50 legs and installation of new hammers (4 units) with their respective pins. • Repair and tuning of the pallet front-cutting saw and the pneumatic cylinders for the milling units. • Repair of the tilting conveyor shaft and welding/turning of the gantry turner drive shaft. • Replacement of optical sensors, mechanical sensors, and magnetic contactors.

Condition: used, Year of construction: 2021, operating hours: 247 h, functionality: fully functional, machine/vehicle number: Tecto DC2 BS, input voltage: 400 V, total width: 1,170 mm, total length: 3,750 mm, total height: 1,230 mm, temperature: 2 °C, type of input current: three-phase, cooling capacity: 3,845 kW (5,227.74 HP), ambient temperature (min.): 4 °C, control cabinet height: 1,230 mm, control cabinet length: 3,750 mm, control cabinet width: 1,170 mm, overall weight: 300 kg, Refrigerated counter on 2 levels for displaying refrigerated goods. The bottom level is for wrapped accessories. The top level is for dispalying fresh seafood / meat / cheese / deli. Excellent Italian quality. There are fridge in both levels. Model: Tecto DC2 BS. Cooling requirement: 3845W (for 24/7 use) Color code: RAL7035 / RAL9006 Lengt: 3,75 meter Hfodpoy T Iimjfx Ag Ejn Depth: 1,17 meter Hight: 1 meter 23,5 cm Cooling maschine: Split R452a Need electrician, plumber and refrigeration technician to install it.