Used Furniture for sale (813)

Condition: good (used), Year of construction: 1978, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Credpfxezvdk Ao Aiiei Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: o Diameter: 125 mm o Speed: 7,500 rpm CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software • Programming options: Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min • Y axis: 35 m/min • Z axis: 30 m/min Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device • Electrical cabinet with air conditioning • Manual loading and unloading stations with cross belts Credpfx Aioyr Ugueiei If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Codpfx Aioyr Utneieri Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2019, color: grey, overall weight: 16,000 kg, maximum load weight: 13,200 kg, empty load weight: 2,800 kg, loading space volume: 45 m³, loading space width: 2,460 mm, loading space length: 7,300 mm, loading space height: 2,520 mm, first registration: 06/2019, axle configuration: 2 axles, total length: 7,300 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 41944 Gnipol, NW745SF * Year of manufacture: 2019 * 7.45 * Fixed roof * Cargo securing rail * Portal door * Furniture version * Telescopic support legs * Galvanized * Other * Permissible total weight: 16,000 kg * Unladen weight: 2,800 kg * Payload: 13,200 kg * Internal dimensions: L=7300 mm, W=2460 mm, H=2520 mm * Internal volume*: 45 m³ * Dimensions of corner brackets E=5853mm * Dimensions of overhang 799mm * Lowering height: 1320mm * Pallet spaces: 18 * 3-row cargo securing rail * Telescopic support legs * Lowering height adjustable * Light strip * [youtube]outubecom/watch?v=N_vz8WMYgmw[{youtube] Disclaimer: Subject to change, prior sale, and errors excepted. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. Cedpfx Ao Aiau Usiieri * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained staff; we will be happy to advise you.

Condition: used, Year of construction: 2019, color: grey, overall weight: 16,000 kg, maximum load weight: 13,200 kg, empty load weight: 2,800 kg, loading space volume: 45 m³, loading space width: 2,460 mm, loading space length: 7,300 mm, loading space height: 2,520 mm, first registration: 06/2019, axle configuration: 2 axles, total length: 7,300 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 41956 Gnipol, NW745SF * Year of manufacture: 2019 * 7.45 * Fixed roof * Load securing rail * Portal door * Furniture version * Telescopic support legs * Galvanized * Other * Permissible gross vehicle weight: 16,000 kg * Unladen weight: 2,800 kg * Payload: 13,200 kg * Internal dimensions: L=7300 mm, W=2460 mm, H=2520 mm * Internal volume*: 45 m³ * Dimensions of corner fittings E=5853mm * Dimensions of overhang 799mm * Lowering height: 1320mm * Pallet spaces: 18 * 3-row load securing rail * Telescopic support legs * Adjustable lowering height * Light band Disclaimer: Subject to changes, prior sale, and errors. More photos and videos can be found on our website. Cedpj Aiavcofx Aiijri Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, Year of construction: 2020, color: grey, overall weight: 16,000 kg, maximum load weight: 13,150 kg, empty load weight: 2,850 kg, loading space volume: 47 m³, loading space width: 2,460 mm, loading space length: 7,700 mm, loading space height: 2,520 mm, first registration: 06/2020, axle configuration: 2 axles, total length: 7,700 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 42038 Gnipol, NW745SF * Year of manufacture: 2020 * 7.45 * Fixed roof * Load securing rail * Portal door * Furniture version * Telescopic support legs * Galvanized * Other * Permissible total weight: 16,000 kg * Unladen weight: 2,850 kg * Payload: 13,150 kg * Internal dimensions: L=7700 mm, W=2460 mm, H=2520 mm * Internal volume*: 48 m² Crede Aiau Ropfx Aiiji * Dimensions of corner fittings E=5853 mm * Dimensions of overhang 799 mm * Parking height: 1320 mm * Pallet spaces: 19 * 3-row load securing rail * Telescopic support legs * Adjustable parking height * Light band Disclaimer: Subject to changes, prior sales and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, Klaas HV 26/6 KA Inclined Lift For sale is a fully hydraulic inclined lift (furniture lift/construction lift) from the reputable manufacturer Klaas. This unit is ideal for moving, roofing work, or general construction projects. The road approval is current, and the TÜV (German technical inspection) is valid until 12/2027. The UVV inspection (accident prevention regulations), which is important for commercial use, is also current and valid until 2027. Technical specifications: • Manufacturer: Klaas • Model/Type: HV 26/6 KA • TÜV valid until: 12/2027 • UVV inspection valid until: 2027 • Year of manufacture: 1994 • Max. lifting height: 26 meters • Chassis number: 9408071 • Permissible total weight: 1500 kg • Permissible axle load: 1500 kg • Maximum load capacity: 200 kg Technical specifications of the installed Klaas winches (year of manufacture 1994): • Winch 1 (Type L 1 – main winch): Crsdpfx Ais Agfd Heisi • Manufacturing No.: 1414 • Pulling force (lower/upper cable layer): 5500 N • Wire rope: Ø 9 mm | Strength: 1570 N/mm² | Calculated total breaking strength: 52 kN • Winch 2 (Type K 1): • Manufacturing No.: 834 • Pulling force (lower/upper cable layer): 3500 N • Wire rope: Ø 7 mm | Strength: 1570 N/mm² | Calculated total breaking strength: 27 kN • Winch 3 (Type S 1): • Manufacturing No.: 1504 • Drive unit: 2m • Pulling force (lower/upper cable layer): 3200 N • Wire rope: Ø 6 mm | Strength: 1570 N/mm² | Calculated total breaking strength: 19 kN "Everything from one source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2007, functionality: fully functional, operating hours: 10,570 h, power: 15 kW (20.39 HP), type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total length: 5,860 mm, overall weight: 2,700 kg, Equipment: CE marking, documentation/manual, Industrial BRANDT KDF 550C edgebander for sale, designed for the production of cabinet furniture. A reliable, industrial-grade model featuring a pressure belt; suitable for both: small workshops and larger-scale production. Features and Equipment: Automatic edge feeding Gluing unit (for EVA glue) Front and rear end-trimming saws Top and bottom milling units Corner rounding (two units – for faster processing) Scrapers Buffing/polishing unit Edge thickness: ~0.4–3 mm Panel thickness: up to ~50 mm Sprayers. Credpfx Aoz Smxueiiei Condition: Used, fully functional machine. Currently still in operation at a furniture workshop and available for inspection. Regularly maintained by UAB Lintera. We are the second owners—a small company. The machine has not been used for third-party contract work; it has been used exclusively for our own furniture production, operating on a single-shift basis. Price not includes VAT.

Condition: used, TECHNICAL DETAILS - Laminated tray : 1600 x 800 x 900 [mm] - Weight : 120 [kg] - Quantity : 10 Csdexylv Ujpfx Aiijri - Unit price : 600 €

Condition: used, mileage: 52,270 km, power: 96 kW (130.52 HP), first registration: 01/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,950 mm, fuel: diesel, fuel tank capacity: 80 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, loading space length: 4,240 mm, loading space width: 2,090 mm, loading space height: 2,160 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, onboard computer, power mirror, start-stop system, tail-lift, tire pressure monitoring, = Additional Options and Accessories = - Automatic low beam headlights - Heated exterior mirrors - Electric front windows - Electrically adjustable exterior mirrors - Euro 6 emission standard - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Collision mitigation by braking - Leather steering wheel - Lumbar support - Front center armrest - Multifunctional steering wheel - Fog lights - Radio - Radio with DAB - Rain sensor - Lane keeping assist - Immobilizer - Windshield heating = Additional Information = General Information Number of doors: 2 Model range: July 2023 - March 2025 Cab: Single cab Technical Information Torque: 360 Nm Number of cylinders: 4 Engine displacement: 1,995 cc Maximum speed: 157 km/h Dimensions Length/Height: L4 Weights Unladen weight: 2,495 kg Payload: 1,005 kg GVW: 3,500 kg Max. towing capacity: 2,800 kg (unbraked 750 kg) Functional Tail lift: Sörensen, tailgate, 750 kg Interior Interior: black Crjdpfo Ahxc Ejx Aiiji Consumption Average fuel consumption: 9.1 l/100km Maintenance, History and Condition APK (Technical Inspection): valid until 10.2027 Number of keys: 2 (1 remote) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, mileage: 29,660 km, power: 96 kW (130.52 HP), first registration: 08/2018, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,950 mm, fuel: diesel, CO₂ emissions: 178 g/km, fuel tank capacity: 80 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, loading space length: 3,700 mm, loading space width: 2,020 mm, loading space height: 2,080 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, power mirror, start-stop system, tail-lift, = Additional Options and Accessories = - Armrest - Heated exterior mirrors - Electric windows (front) - Electrically adjustable exterior mirrors - Euro 6 emission standard - Driver airbag - Remote central locking - Height-adjustable steering wheel - Leather steering wheel - Multifunctional steering wheel - Multimedia compatible - Fog lights - Radio/CD player - Radio with MP3 support - Reversing camera - Voice control - Immobilizer = Additional Information = General Information Number of doors: 2 Model range: May 2017 - July 2019 Cab: single Technical Information Torque: 385 Nm Number of cylinders: 4 Engine displacement: 1,995 cc Dimensions Length/Height: L3 Weights Unladen weight: 2,485 kg Payload: 1,015 kg GVW: 3,500 kg Crsdjz Eay Aspfx Aiisi Interior Interior: black Fuel Consumption Average fuel consumption: 7.1 l/100km Maintenance, History and Condition APK (Periodic Technical Inspection): valid until 10/2027 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: excellent (used), Roller conveyors for the furniture industry, WTT Fördertechnik GmbH, Type 121 Price for: 1 unit = 75 EUR (total length 3m) For larger quantities, price on request. Detailed description: Roller conveyor length L = 3000 mm Installation length IL = 500 mm Csdpfx Aewwmitsiiori Load roller spacing T = 200 mm Roller conveyor height H = 280 mm, adjustable by +/- 25 mm Number of feet FA = 1 unit per running meter Consists of: - 2 units of side rails (side profiles), each 3000 mm long, made of profile 20/80/40/3 mm, with a grid spacing of 25 mm, holes suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. Weight per side rail: 8.15 kg - 15 units of insertable load rollers Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness, Axle - 12 mm spring axle, Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel-finished. Installation length IL = 500 mm Weight per roller: 2.4 kg - 3 units of screw-on bridge support feet in a stable welded construction made of special profile with cross brace, height adjustable by +/- 25 mm via threaded spindle M16 with screw slot. With floor mounting plates and dowel hole. Powder-coated in RAL 3000 red. Weight per foot: 2.5 kg. (Subject to changes and errors in the technical data and prior sale)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 221363, working width: 400 mm, passage height: 250 mm, total length: 1,300 mm, total width: 1,070 mm, total height: 1,450 mm, height adjustment type: mechanical, overall weight: 600 kg, working height: 900 mm, compressed air connection: 6 bar, extraction nozzle diameter: 100 mm, type of input current: three-phase, power: 8.73 kW (11.87 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 250 mm, workpiece width (max.): 400 mm, empty load weight: 580 kg, input current: 16 A, Equipment: emergency stop, rotational speed infinitely variable, This used cross-cutting machine, equipped with one brushing unit, is designed for creating textures on wooden surfaces. The combination of the cross-cutting unit and the brushing unit allows for the creation of various effects, including authentic band saw textures and other natural surface patterns. Crodpfo Aazymjx Aiiji The machine features a TAP function that enables the application of a random effect to the workpiece. This is achieved using five separate tapping heads above the sanding belt. A compressed air connection is required for the operation of this function. By adjusting the transport speed, the settings of the cross-cutting unit, and the brushing unit, the intensity of the process can be easily controlled. This allows for the creation of a wide range of textures and finishes, depending on the desired end result. The machine is suitable for processing various wooden products, including wooden floors, wall panels, furniture components, doors, and other wooden products where a distinctive surface texture is desired. This particular machine is offered as a used machine, is in very good condition, and is immediately available. For additional information, technical specifications, or photos, please contact us.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 201269, total width: 1,150 mm, total height: 1,650 mm, total length: 900 mm, working width: 700 mm, input voltage: 230 V, type of input current: three-phase, overall weight: 170 kg, power: 0.75 kW (1.02 HP), passage height: 100 mm, height adjustment type: mechanical, working height: 850 mm, roll width: 700 mm, input frequency: 50 Hz, input current: 16 A, Equipment: CE marking, The used roller coating machine for adhesive is designed for applying adhesives such as glue to various surfaces, including veneer, aluminum veneer, and other materials used in the furniture, parquet, and woodworking industries. The machine is also suitable for materials such as plastic, cardboard, textiles, wood, and more. Crsdpfx Ae Aayrneiiei The adhesive roller coating machine uses an adjustable adhesive reservoir for even and precise adhesive distribution. The speed of the adhesive roller and the transport roller can be adjusted using a frequency controller. The machine can operate at speeds ranging from 5 to 50 m/min. The feed height can also be adjusted using a handwheel. The machine is fully functional and has been inspected in our workshop.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale is our FORMAT4 tempora F400 45.03 L edge banding machine from Felder, used in our furniture workshop. The machine was purchased in 2019. The equipment includes joint milling, trimming, flush trimming and radius milling, corner processing, as well as radius and surface scraping blades and polishing units. PERFORMANCE DATA According to the total counter of the machine control system, as of October 30, 2026: • Piece counter: 24,696 • Total edge length processed: 22,186.4 m • Operating time of chain conveyor: 415 hours 58 minutes • Operating time of main switch: 4,996 hours 3 minutes The counter readings are documented in the attached display photo. The operating time of the main switch is shown separately from the actual operating time of the chain conveyor. EQUIPMENT • m-motion control system with a 10-inch smartouch touchscreen • Jointing unit with plunge-controlled diamond cutters • Teflon-coated gluing unit for 1.5 kg of EVA granules with synchronized gluing roller • Pneumatically controlled pressure unit • Guillotine shear for roll edge material from 0.4 to 3 mm • Miter saw unit with 0°/10° cutting selection • Upper and lower flush trimming and radius milling units with manual adjustment • Corner processing unit for post-forming and softforming profiles • Radius scraping blades, top and bottom • Surface scraping blades, top and bottom • Polishing units, top and bottom • Release agent spray device • Extendable workpiece support • Edge magazine with rotary table, diameter 740 mm TECHNICAL DATA • Workpiece height: 8–45 mm • Roll edge thickness: 0.4–3 mm Credpfxo Ahmv Ao Aiioi • Feed rate: 9 m/min • Minimum workpiece length: 140 mm • During corner processing: workpiece height 10–45 mm and minimum workpiece length 270 mm • Jointing depth, manually adjustable: 0–2 mm • Electrical connection: 400 V / 50 Hz INSPECTION AND PICKUP Location: Neuwied. Inspection by appointment only. Pickup only. Transportation and loading must be arranged in advance.

Condition: excellent (used), Furniture Carcasse (Case) through-feed Press Clamp "LIGMATECH" Mod. CabTeq T200 (MDE 120 / 25 / 08) - Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) - Adjustable feeding speed m/min 12-40 Crjdez D A Iyjpfx Aiiji - HOMAG powerTouch - Total installed power Kw 10 - Total length of the machine mm 6350 Machine ables to process furniture cabinets (corpus) with dimensions: - Min/Max Length (Min/Max): mm 250 /2500 - Min/Max Depth - Width (Min/Max): mm 120 /800 - Min/Max Height (Min/Max): mm 220 /1320 Motorized transport carpet (length mm 3000) Motorized transport carpet (length mm 3000)

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 2306_16_4003, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, type of input current: DC, edge thickness (max.): 2 mm, feed rate X-axis: 20 m/min, total height: 850 mm, total length: 1,000 mm, total width: 700 mm, overall weight: 170 kg, SCHUGOMA System TMS_8462 – mobile edge banding machine for zero-joint technology – Siemens control For sale is a mobile edge banding machine for zero-joint technology from SCHUGOMA System GmbH, model TMS_8462, manufactured in 2016. The machine has hardly been used, is in very good condition, and is ready for immediate use. It features a Siemens control system and is suitable for woodworking companies, carpentry shops, and furniture manufacturers. Crjdpfx Ao Adqr Hsiiji This is an interesting opportunity for companies looking for a scarcely used machine for professional zero-joint technology. The machine can be inspected on-site by appointment. Interested parties can personally verify its condition and operational readiness.

Condition: used, mileage: 155,388 km, power: 115 kW (156.36 HP), color: red, gearing type: automatic, loading space length: 71,200 mm, loading space width: 24,600 mm, loading space height: 26,900 mm, Equipment: ABS, central locking, power assisted steering, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. ). Mercedes-Benz Atego 816 L 4x2 box van A1M front axle, 4.1 t, A2B rear axle, crown wheel 325, hypoid, 6.2 t, A5L axle ratio i = 3.417, B1B electronic braking system with ABS and ASR, B1C electronic compressed air supply unit, low, B2A disc brake, on front and rear axles, B4A condensate monitoring, for compressed air system, C2S wheelbase 4820 mm, C5I fastening parts, for platform body, C6A steering ZF 8090, C6S stabilizer, for extreme high loads, rear axle, C7A rear underrun guard (ECE), C7M protective device, side, weight-optimized, C9L extended frame overhang, 200 mm, D1B driver's air-suspended seat, standard, D1M passenger's fixed seat, simple, D1Z center seat, with 3-point safety belt, D3X seat cover, flat weave, D4A standard cockpit, D6Y pollen filter, D7L storage compartment, above windshield, 1 compartment, D8A roof hatch/ventilation flap, roof, E0Y battery cover, E1E batteries, 2 x 12 V/100 Ah, maintenance-free, E1N generator 28 V/100 A, E5A switch No. 1 for external body electrical system, E6Y reversing warning, combined with hazard warning lights, F1X S cab ClassicSpace, 2.30 m, tunnel, F6I front mirror, heated, F6J main mirror, electric, driver's side, F7W cab entry, single-step, F8D 2 vehicle keys, extra, F8L immobilizer, with transponder, G0U economy driving program, G1B transmission G 70-6/5.94-0.74, G5G Mercedes PowerShift 3, I0E tires tubeless, 215/75 R 17.5 front/front axle, I4A wheel formula 4x2, I5Q 7.5-tonne, I6W leaf spring suspension, rear axle, J1A instrument cluster, 10.4 cm, J1R digital tachograph, EC, speed, ADR, J1S tachograph manufacturer VDO, J2B CD radio, Bluetooth, J3N Fleetboard Eco Support, J9D pre-wiring for toll collection, K0E plastic tank 120 l, left, K3T AdBlue tank 25 l, K5M tanks, lockable, K5S protective cap for AdBlue dosing system, K7I exhaust system, on the frame on the right, tailpipe facing inward, L1B daytime running light, L1H fog lights, halogen, M0S noise encapsulation, according to ECE, M1H engine OM934, R4, 5.1 l, 115 kW (156 hp), 650 Nm, M5M engine version Euro VI, with OBD-C, M5U engine brake, standard system, Q1C front spring 3.4 t, parabolic, Q2A rear spring, 4.6 t, parabolic, R0Z wheel nut cover, R1A steep shoulder rims 6.00 x 17.5, S1D stability control assistant (ESP), S1H lane keeping assist, S1P Active Brake Assist, S5A speed limiter 90 km/h / 56 mph, ECE, S5Z cruise control, T0G weight variant 7.49 t (3.4/4.6), X2T maintenance documentation, Y1G assignment cab paint, top coat line 2, Z4D inline engine, 4 cylinders, Z5B OM 934, cargo space dimensions: L 7.120mm W 2.460mm H 2.690mm, tire tread: 1st axle 9mm, 2nd axle 5-9mm, permissible total weight: 7.490kg, unladen weight: 5.450kg, payload: 2.040kg Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. You can find more information on our website. ... Errors, changes and prior sale are subject to change!!! ESP, particle filter = Further information = Year of manufacture: 2019 Engine displacement: 5,132 cc Crodpfxo Aftnyj Aiiji GVW: 7,490 kg Please contact Tobias Ebert for more information.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 09075101981004, input voltage: 380 V, type of input current: three-phase, total length: 28,000 mm, year of last overhaul: 2024, control voltage: 380 V, workpiece height (max.): 160 mm, Equipment: double-sided, A woodworking company in Latvia is offering a complete Weinig GreCon Combipact finger jointing line for sale. The machine has had only two owners, both well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for the sale is the recent purchase of new Weinig equipment. The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated in a single shift. The machine also has the option to produce finger joint connections for furniture. Cjdpfx Aioz Armloisri The machine can be inspected and demonstrated in operation at our facility. Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity and profitability. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. We are also selling a Weinig Dimter Opticut optimization line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email, and I will provide all technical information. Additional images and videos can also be provided.

Condition: excellent (used), Year of construction: 2014, I sell the BIESSE line consisting of: Biesse Winner WRT loading infeed device 1-channel Credpfx Aoznfd Usiioi Biesse control station for failure elements Biesse Edge 1 shaped elements edge banding and element working station Biesse Edge 2 shaped elements edge banding station Biesse Edge 3 shaped elements working station Biesse Edge 4 shaped elements working station with drilling and inserting Wandres cleaning device Biesse Winner WRT unloading outfeed device 1-channel Manufacture year 2014. Available immediately. Possible to see at work. Possible to adjust for certain product. For more photos and details please send the request.

Year of construction: 2000, condition: like new (used), I sell the vibration device for the furniture accessories input. 3Master Vibratori AO-700S, year 2000. Crsdpfx Aisd R Iugsioi Like new, suitable for Biesse machine but possible to adapt for other types. Suitable for different furniture accessories, possible to change. Doch fur BLUM geeignet. 3pcs. available.

Condition: used, Industrial furniture MATRIX MAXI Crodsz Hqtpjpfx Aiioi

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: HG-1020-5571, The machine shown is a HEBÖ RBV-12SV pipe drilling machine with extensive accessories. The machine is designed for the processing of pipes and profiles and is used as a semi-automatic pipe drilling machine. According to the manufacturer, it is suitable for applications in, among other things, railing construction, shelving system construction, and the furniture industry. The processing can include drilling, reaming, core drilling, and thread forming. The RBV-12SV has an automated processing sequence after manual clamping of the workpiece. Technical specifications according to the data plate of the machine shown: Manufacturer: hebö Maschinenfabrik GmbH Machine type: RBV-12SV Machine number: HG-1020-5571 Year of manufacture: 2020 Voltage: 400 V Frequency: 50 Hz Power: 5 kW Current: 11.5 A Weight: 555 kg Crodpfx Aezypgdsiisi The manufacturer's specifications for the RBV-12SV also include a speed range of 0–2,250 rpm and a feed rate of the drilling unit of 0–300 mm/min. Depending on the model, pipes up to 3" or 88.9 mm, square profiles up to 80 × 80 mm, and other profile shapes can be processed. Optional: with mounted pneumatic/manual thread drilling device CMA LCN 12 with compressed air drilling unit (yellow attachment).

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 590, type of input current: three-phase, table length: 1,000 mm, overall weight: 480 kg, height adjustment type: hydraulic, input voltage: 400 V, grinding belt length: 3,200 mm, grinding belt width: 200 mm, input frequency: 50 Hz, The HOUFEK HB 1000 edge sanding machine, manufactured in the Czech Republic, is designed for sanding solid wood and wood-based materials. This machine is ideal for carpentry workshops, suitable for processing the edges of furniture components, moldings, fronts, and other wooden products. The table with adjustable inclination allows for sanding at an angle, and the additional workstation on the opposite side of the belt increases the machine's capabilities. TECHNICAL DATA: – Manufacturer: HOUFEK, – Model: HB 1000, – Country of manufacture: Czech Republic, – Year of manufacture: 2006, – Serial number: 590, – Power: 3 kW, – Power supply: 400 V, three-phase, – Frequency: 50 Hz, – Rated current: 6.6 A, – Machine weight: 480 kg. CATALOGUE PARAMETERS OF THE MODEL: – Sanding belt width: 200 mm, – Sanding belt length: 3200 mm, – Dimensions of the work table: 1000 × 400 mm, – Table inclination range: 0–45°. The above catalogue dimensions require confirmation by measurement for the offered unit. Cjdoz S Ed Uspfx Aiisri EQUIPMENT: – Work table with adjustable inclination, – Additional table on the opposite side of the belt, – Guide with adjustable angle and scale, – Manual adjustment knobs, – Guards for the sanding unit, – Connections for connecting a dust extraction system, – Emergency stop switch. We issue a VAT invoice. Transportation can be arranged for an additional fee. You are welcome to test the machine. Where can you see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: MMZO 903 706, Model: Prima Plus Amrys, Machine No.: MMZO 903 706, Year of Manufacture: 2004, 9 stations, Length approx. 22 m as shown in the picture without any other items shown in the picture Note: If technical or electronic devices are included in the item, their functionality has not been tested. Note: Pallets are included in the item if shown in the picture. This Müller Martini Prima Plus Amrys gathering machine will be auctioned online in our industrial auction / machine auction entitled “Closing of a well-known printing company: printing machines, extensive printing machine accessories, production technology, spare parts, conveying technology, workshop and operating equipment, as well as storage and office furniture.” Credpe Ahrw Hjfx Aiiei You can find this and many other items from the fields of machinery, printing machine accessories, and production equipment on our platform.