Used Cam Lathe for sale (6,471)

Condition: used, Year of construction: 2004, CNC lathe CNC turning machine Boehringer NG 180 Year of manufacture 2004 Nodpfxozv Ec Tj Ahkjwk

Condition: used, Year of construction: 2017, operating hours: 45,000 h, functionality: fully functional, machine/vehicle number: 17L5M0045, turning length: 490 mm, turning diameter: 395 mm, spindle bore: 61 mm, travel distance X-axis: 235 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 105 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (max.): 6,000 rpm, total height: 2,085 mm, total length: 2,790 mm, total width: 1,752 mm, overall weight: 4,150 kg, The lathe was primarily used for the production of spacers, distance sleeves, and other stainless steel fasteners. It has always been operated by professionals and professionally maintained. Nwodpfx Ajxylzdohkjk

Condition: used, swing diameter 2000 mm turning height 1800 mm Control Siemens Sinumerik 840 Dsl turning speeds range 2,8-315 U/min cross rail adjustment - vertical 1200 mm cross rail adjustment - horizontal +/- 1150 mm 1500 mm bit feeder section 240 x 240 mm Minimum immersion diameter 340 mm cutting capacity 50 kN max. torque on the faceplate 50000 Nm speed range step 1 2,8 - 80 U/min speed range step 2 12 - 315 U/min Max. clamping weight 12000 Kg power capacity faceplate 105 kW weight of the machine ca. 33 t dimensions of the machine ca. 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min; 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Njdpfey Dvlqsx Ahkewk Overhaul: - Extensively overhauled in 2012 by Siemens Industry Munich - Items overhauled included: control system, cabling, motors, measuring systems, etc. - Further information can be found in the PDF

Condition: used, Year of construction: 2001, center height over bed 500 mm centre distance 6.000 mm bed width 670 mm turning diameter over bed 1.030 mm turning dia. over face-slide 640 mm Max. workpiece weight between centers 5.000 kg Max. workpiece weight between centers (collet) 6.000 kg feed speeds x- and z-axis 6.500 mm/min spindle head ASA 15" spindle turning speed range 4 - 830 U/min Torque 6.224 Nm total power requirement 70 kW weight of the machine ca. 11,3 t Headstock: - Front bearing, inside diameter: 235 mm - Rear bearing, inside diameter: 216 mm - Diameter of hole through spindle: 170 mm - Morse taper in spindle sleeve: 6 MK Tailstock: - Quill diameter: 150 mm - Quill travel: 400 mm Nwsdpfxozt Szks Ahkok - Quill morse taper: 6 MK Saddle and cross slide: - Torque AC axes drive motors (X and Z): 17/22 Nm - Max. feed force, X and Z (continuously rated): 2500 daN - Recirculating ballscrew diameter X-axis: 40 x 5 mm - Max. travel, X-axis: 650 mm

Condition: used, Nakamura - Tome TMC - 15 CNC Lathe with Nakamura - Tome Fanuc CNC Control, 16 Position Tool Turrret, LNS 6.42HS = 4.8 Barfeeder. S/No. 34545, Capacity Round Collet 34mm, Chuck Diameter 165mm, Swing Over Bed 300mm, Swing Over Saddle 170mm, Max Turning Diameter 180mm, Max Turning Length 250mm, Spindle Speed 135 - 4500rpm, Spindle Nose A2 - 5. S/No. 01908. Country of Origin: Japan Please Note: Filtermist shown not included in this lot, can be purchased separately. Location: This lot is located in Burton-on-Trent. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Nodpfxjzvcrfe Ahkewk

Condition: used, Year of construction: 2000, No. of axis 10 No. of spindles 2 Max. spindle bore 10 mm Spindle speeds 100-16000 rpm Control: Fanuc Equipped with: Nwsdpfx Ahozvcduekek Magazine barfeeder FMB Minimag Chip conveyor

Condition: used, Year of construction: 2003, No. of axis 10 No. of spindles 2 Nsdpfx Ahezvb Ryekewk Max. spindle bore 16 mm Spindle speeds 100-10000 rpm Live toolings on S2, S3, S5 & S6 Control: Fanuc PNC 16i Equipped with: Magazine barfeeder FMB Turbo 2-16

Condition: excellent (used), ROMI GL 240 2 Axis CNC Lathe Swing over Z axis cover mm 420 Maximum cutting diameter mm 300 Maximum cutting length mm 400 Nwsdpfezu Nggjx Ahksk Travel (X axis) mm 188 Travel (Z axis) mm 400 Spindle nose ASA A2-5" Spindle hole diameter mm 58 Bar capacity (dia.) mm 51 Speed range rpm 6 to 6000 Rapid traverse (X & Z axis) m/min 30 Number of stations atc 12 AC spindle motor hp/kW 20/15

Condition: like new (used), Year of construction: 2023, functionality: fully functional, spindle bore: 77 mm, turning diameter: 300 mm, turning diameter over bed slide: 470 mm, turning length: 1,120 mm, Strung CNC VOEST-ALPINE WNC 300S – Modernizat complet în 2023 cu comandă NCT nouă. Se oferă spre vânzare strung CNC profesional VOEST-ALPINE WNC 300S, un utilaj industrial robust, construit în Austria, recunoscut pentru rigiditatea structurală, precizia ridicată și fiabilitatea în exploatare. Mașina a beneficiat în anul 2023 de o modernizare majoră, fiind echipată cu un sistem de comandă CNC NCT de ultimă generație, investiție ce a depășit aproximativ 10.000 Euro doar pentru partea de control și automatizare. Noua comandă NCT transformă utilajul într-o mașină modernă, intuitivă și ușor de operat, oferind funcționalități actuale de programare, diagnosticare și control al procesului de prelucrare. Interfața este dotată cu ecran tactil generos, care permite operarea rapidă și acces facil la toate funcțiile mașinii. Pe lângă modernizarea electronică, utilajul a beneficiat de numeroase optimizări mecanice și ergonomice menite să îmbunătățească productivitatea și confortul operatorului: ușă de acces și inspecție reproiectată, cu deschidere mai mare; suprafață vitrată extinsă pentru vizibilitate excelentă asupra zonei de lucru; geam de siguranță industrial de înaltă rezistență; modificarea și optimizarea sistemului de comandă a universalului; deschidere și închidere automată a bacurilor prin pedală; îmbunătățiri ale circuitelor de automatizare și exploatare; acces mult mai facil pentru reglaje, măsurători și supravegherea procesului de prelucrare. Utilajul se află în stare tehnică foarte bună, fiind complet funcțional și pregătit pentru producție imediată. Lucrează cu toleranțe strânse și oferă stabilitate excelentă inclusiv în operații solicitante de strunjire. Poate fi verificat și testat în funcționare. Deși a fost achiziționat și instalat pentru dezvoltarea activității, mașina nu a fost exploatată în mod semnificativ din cauza lipsei comenzilor, motiv pentru care se oferă acum spre vânzare. Caracteristici tehnice principale Producător: VOEST-ALPINE (Austria) Model: WNC 300S Sistem de comandă: NCT (modernizare completă în 2023) Diametru maxim peste batiu: aproximativ 470 mm Diametru maxim peste sanie: aproximativ 345 mm Lungime de strunjire: până la 1120 mm (în funcție de configurație) Alezaj ax principal: 77 mm Turație arbore principal: până la 3000 rpm Putere motor principal: 37,5 kW Turelă portscule cu 12 poziții Posibilitate utilizare scule antrenate (în funcție de configurație) Contrapunct pentru prelucrarea pieselor lungi Construcție industrială grea pentru absorbția vibrațiilor și menținerea preciziei Greutate utilaj: aproximativ 6 tone, în funcție de echipare. Avantaje pentru cumpărător Nsdpfx Ahezcy Dyjkjwk ✔ Comandă CNC NCT nouă, modernă și intuitivă ✔ Investiție recentă importantă în modernizare ✔ Precizie ridicată și funcționare stabilă ✔ Construcție industrială robustă VOEST-ALPINE ✔ Vizibilitate excelentă asupra procesului de lucru ✔ Automatizare îmbunătățită pentru manipularea universalului ✔ Costuri reduse de punere în funcțiune – utilaj pregătit de lucru ✔ Posibilitate de probă și verificare înainte de achiziție Strungul reprezintă o alegere excelentă pentru ateliere de prelucrări mecanice, producție de serie mică și medie, execuția de piese de precizie, reparații industriale și lucrări complexe de strunjire care necesită rigiditate, putere și repetabilitate ridicată.

Condition: used, Year of construction: 2007, operating hours: 9,546 h, functionality: fully functional, machine/vehicle number: R2EVO401, turning diameter over cross slide: 210 mm, turning length: 500 mm, turning diameter: 210 mm, spindle bore: 45 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, overall weight: 2,600 kg, Equipment: documentation/manual, EMCO 45 E45 with bar feeder EMCO Compact Load The machine is in good condition, complete with manual, and is fully functional. The machine can be inspected in Span until August 28, 2026; the loading date is scheduled for September 2, 2026. Sale due to replacement investment in a new CNC lathe. Control system: Siemens 810D Turning length with chuck: 500 mm Max. turning diameter between centers: 210 mm Nwedpfxezlihlj Ahkek Bar diameter: 45 mm Rapid traverse rates: 24/20 m/min Spindle stock: DIN 55026/KK5 12-position tool turret VDI-30 6 powered stations C-axis Tailstock with hydraulic quill, MK-4 Power chuck Röhm KFD-HE 170/3 Removal and loading of the machine will be carried out by Hametec; the loading date is September 2, 2026. The buyer is responsible for arranging transport.

Condition: used, Technical details: turning diameter over bed: 1200 mm turning diameter over support: 800 mm turning length: 3200 mm length of gap: 600 mm center height measured in bed: 600 mm turning dia. in gap: 600 mm spindle turning speed - continuous: 4,6-545 / 22 steps U/min spindle passage: 90 mm feed: 1,4-510 m/min taper: MK6 total power requirement: 15 kW weight of the machine ca.: 10,0 t dimensions L x W x H: 6,20x2,00x1,80 m dimensions electric cabinet LxWxH: 0,55x0,33x1,0 m equipped with: face chuck diameter 1000m (4 jaw chuck) Njdpfx Aozuyfajhkowk fourfold chisel taper steady rest closed, inside diameter 250mm revolving tail center conical turning device *

Condition: new, power: 368 kW (500.34 HP), axle configuration: 6x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (by phone). Iveco AS260S50Y/FS CM 6x2 BDF Swap Body Chassis Nwodpfx Aoyhyh Hjhkjk Axle configuration: 6x2P, 3 axles, trailing axle. Cab type: AS MY. Emission level: Europe. Engine: Cursor 13, 500 HP, Euro VIe. Transmission: 12-speed HiTroniX, automated. Permissible gross weight: 26 t. Drive axle variant: SR, single reduction, single axle. Full air suspension. Disc brakes. Steered trailing axle, single tires. Vehicle variant: Container chassis CM. Vehicle set-up: ON. Wheelbase: 4,800 mm. Model year: 2024. Engine speed: 1,650 rpm. Emission standard: EURO VI E. Tires: 315/70R22.5. Speed limiter: 90 km/h. Electrically operated roof hatch (transparent with MLL high roof). Standard black front grille. Manually operated cab tilt. Mirror cams with cover on AS. FHS in vehicle color. Front underrun protection for chassis with a gross weight over 7,490 kg. Plastic bumper. AS high roof cab. Electronic immobilizer and 2nd vehicle key. Dashboard design: plastic with black trim. COC: EC whole-vehicle type approval. Digital tachograph 4.1. Air compressor: 2-cyl., 630 ccm, with integrated clutch, demand controlled. Smart generator 2880 W (24V x 120A), demand controlled. SR-SOLO LIGHT 17x. Rear shock absorbers. Weight variants: front axle 8,000 kg / rear axle 11,500 kg (technically possible: 12,000 kg) / trailing axle 7,500 kg (technically possible: 8,000 kg). Standard overall train brake. Front axle stabilizer. Standard applications. Exhaust pipe outlet to the left. Air filter unit under cab. Lift control for trailing or leading axle (TX/P). Ride height with 2 settings. Rear underrun protection omitted. Trailer version for use with continuous braking system. Rear crossmember, D-value: 130 kN. Trailer socket for 24 volt operation, 15-pin. Rear axle ratio: i = 2.31. Connectivity box 4G incl. TCO service contract. Engine idle shutdown. Tire pressure monitoring system (TPMS), internal sensors. VDI interface for telematics services, version 4.0. Infotainment 10" TFT display. Gearbox software ECO-Roll (coasting function). GPS cruise control Hi-Cruise. Drowsiness warning system (Driver Drowsiness Attention Warning). Warning triangle compliant with ECE-27 directive. Hill start assist (Hill Holder) for easy hill starts. Electronic Stability Program (ESP). Reversing camera monitoring system. Blind spot monitoring system (BSIS) on the right. Intelligent Speed Assistant (ISA). Front area monitoring (MOIS). Emergency brake assist (AEBS). Pre-installation for alcohol interlock (ALC) with cable. NOISE ECE 51/03. Standard EU vehicle width. ECAS air suspension with 2 sensors. Speedline aluminum wheels, SLT. Plastic parts of the cab painted in cab color. Left and right luggage compartments. Transparent sun visor mounted outside on cab roof. Additional diesel/water heater, 4 kW. Fully automatic air conditioning in combination with stationary air conditioning. Standard refrigerator and storage box. Leather steering wheel. With curtains at the bed. Signal horn behind bumper (compressed air). Foldable table in passenger area. One-piece lower bed, firmness: hard. Upper bed with continuous mattress. Ashtray in center console. Electrical pre-installation for tail lift operation, ...

Condition: used, Year of construction: 2008, total length: 3,300 mm, total width: 1,800 mm, total height: 1,900 mm, overall weight: 6,000 kg, Working range Center distance: 1,500 mm Travel over bed: 570 mm Travel over cross slide: 340 mm Cross slide travel: 290 mm Bed width: 350 mm Spindle Spindle head DIN 55027 size 8 Spindle bore: 93 mm Speed range: 1–3,000 rpm Main drive: 20 kW AC motor Tailstock Quill diameter: 90 mm Quill stroke: 180 mm Mounting: MK 6 Feed Feed force X: 7,000 N Feed force Z: 10,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 10 m/min Machine Weight: approx. 3.6–3.9 t Dimensions: approx. 3,300 × 1,800 × 1,900 mm Equipment Heidenhain Manual Plus cycle control Heidenhain AC servo drives ZF two-speed gearbox (electrically switched) 3-jaw wedge bar chuck Ø250 mm Face plate Ø500 mm Fixed steady rest Tailstock with live center Multifix tool holder Parat 4-station turret Reinforced coolant pump Machine feet Accessories Multifix tool holder package Various turning holders Measuring equipment / setting tools Steering ring Face plate Additional mountings and accessories Njdpfxsy S Ni Se Ahkswk Documentation available Typical dimensions (1,500 mm center distance version) Space requirement / dimensions approx.: Length: approx. 3,900 mm Width: approx. 2,000 mm Height: approx. 2,000 mm Turning length max.: 1,500 mm Turning diameter over bed: 570 mm Weight approx.: 6,000 kg Dimensions (LxWxH) approx.: 3300 x 1800 x 1900 mm Turning diameter via support: 340 mm Control: Heidenhain Manual Plus Year of construction: 2,008 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: Yes

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, L & Z Lathe WEILER CONDOR B incl. three-axis digital display -CE marking -Machine from an educational institution / very well maintained -Center height 165mm -Swinging diameter over bed 330mm -Swinging diameter over cross slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm -Automatic / longitudinal and cross feeds -Threading / metric / inch, etc. -Bar capacity 40mm -Tailstock / Morse taper MT3 -Multifix base and inserts -Three-jaw chuck 200mm -Electric chuck guard Nwodjzvx A Tspfx Ahkek -Spindle cover -2x Emergency stop -Coolant system -Chip guard -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1200 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2018, spindle bore: 140 mm, turning diameter over bed slide: 1,100 mm, center width: 4,000 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 4 rpm, overall weight: 14,500 kg, Turning lathe, manufacturer: FAT HACO, type: TUR SMN 1100 x 4000 Nsdpfx Ahjzvwmqekowk Year of manufacture: 2018, serial number: 180529, control system: SIEMENS 840 D SL, distance between centers: 4,000 mm, swing diameter over bed: 1,100 mm, swing diameter over cross slide: 790 mm, max. workpiece weight between centers: 4,000 kg, spindle speed: 4 to 1,200 rpm, spindle bore: 140 mm, drive power: 33 kW, machine weight: 14,500 kg. The standard equipment of the machine includes an 8-position VDI turret, a hydraulic steady rest, an automatic gear change, a coolant system, a hydraulic unit, an automatic lubrication system, work area lighting, a USB port, and CE-compliant design.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Control: Fanuc 31i Model B Includes: Barfeeder FMB Turbo 3-36 Number of axes: 7 Nedpfxezvwlaj Ahkowk Number of spindles: 2 Live tool B-axis Main spindle: Max. bar diameter: 32 mm Travel: 380 mm Spindle speeds: 8000 rpm Spindle power: 7.5 / 10.5 kW Counter spindle: Max. bar diameter: 32 mm Z-axis stroke: 295 mm Spindle speeds: 8000 rpm Spindle power: 3.7 / 5.5 kW Machine footprint: 3000 x 1400 mm Machine height: 1857 mm Machine weight: 4300 kg.

Year of construction: 1996, condition: ready for operation (used), Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible. Nodpfxev Scrho Ahkswk

Year of construction: 2007, condition: ready for operation (used), A Buffalo CNC lathe in need of repair is offered for sale. Center height: 200mm, distance between centers: 880mm, chuck diameter: 160mm, swing over bed: 410mm, swing over cross slide: 230mm, bed width: 260mm, spindle bore: 46mm, spindle nose: A2-5, max. spindle speed: 5000rpm, X-axis travel: 190mm, Z-axis travel: 855mm, rapid traverse: 12m/min, tailstock quill diameter: 58mm, tailstock quill travel: 140mm, tailstock quill taper: MT4, control: Fagor 8055 TC. Accessories included. Dimensions X/Y/Z: approx. 2286mm/1800mm/2230mm, weight: approx. 2350kg. The feed motor of the spindle drive is defective. An on-site inspection is possible. Nwodpfozt Slisx Ahkok

Year of construction: 1975, condition: ready for operation (used), Offered is a precision lead and feed screw lathe: Center distance: approx. 1000mm, center height: 180mm, swing diameter over bed: 360mm, spindle bore: 35mm, spindle mount: D1-3 Camlock, spindle taper: MK5 (MT5), speed steps: 12 speeds, speed range: approx. 40-1800rpm, longitudinal feeds: 0.05-0.7mm/rev, cross feeds: 0.02-0.4mm/rev, metric threads: 0.4-7.0mm, inch threads (Whitworth): 4-56threads/inch. Inspection possible by appointment. Nwodpfx Ajyzr Hxohkok

Condition: ready for operation (used), Year of construction: 2015, A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible with power. Njdpfxex Dm Dzo Ahkewk

Year of construction: 2017, condition: ready for operation (used), X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 4600mm, width: 1600mm, height: 2700mm, weight: 2.1t, operating hours: 34,536h. With automation FMB Unirobot LR MATE 200iD7L-P2TB, grinding spindle Jäger HF-Spindle, chuck MicroCentric 4-410-3-QC, MARPOSS measuring system with automated dimensional compensation, oil mist filter S400, belt filter Knoll KF110/500, hinged belt conveyor 320 S1 and other accessories. On-site inspection is possible. Nwodpfx Ajv Uz Akohkok

Year of construction: 2009, condition: ready for operation (used), Turning diameter: 200mm, passage diameter: 330mm, passage diameter over cross slide: 260mm, travel X/Z: 160mm/460mm, feed X/Z: 24m/min, speed: 5000rpm, spindle clearance: 51mm, spindle power: 16.5kW/11kW, torque: 1665.5Nm/112Nm, tailstock: 400mm, tool positions: 12. Machine dimensions X/Y/Z: approx. 4200mm/1700mm/2300mm, weight: approx. 3500kg, control: Siemens Sinumerik 810D. Including chip conveyor. Documentation available. On-site inspection is possible. Nodpfov Dkb Ijx Ahkjwk

Year of construction: 2002, condition: ready for operation (used), A relatively lightly used Traub CNC universal lathe is available. Spindle bore: 82mm, max. chuck diameter: 315mm, turning length: 750mm, X/Z travel: 360mm/750mm, Z-axis travel: +/-60mm, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 3250mm/1900mm/2300mm, weight: approx. 7800kg, operating hours: approx. 21812h. Documentation available. An on-site inspection is possible. The image is for reference only. Nwsdpfx Aszhnrnohkjk

Year of construction: 2002, condition: ready for operation (used), A factory-reconditioned CNC counter-spindle lathe from Traub, overhauled in 2018, including a bar feeder, is available. Main spindle bore: 36mm, speed: 6300rpm, counter spindle bore: 32mm, speed: 6300rpm, Z4 travel: 250mm, rapid traverse Z4: 30m/min, max. workpiece length: 200mm, max. workpiece diameter: 32mm, control system: Traub/Index TX8i, operating hours: approx. 147000h. Upper tool carrier: X2 travel: 50mm, Y2 travel: +/-20mm, Z2 travel: 100mm, rapid traverse X2/Y2/Z2: 15m/min, tool stations: 12, speed: 6000rpm. Front tool carrier: tool stations: 5, X3 travel: 370mm, Z3 travel: 250mm, rapid traverse X3/Z3: 30m/min, max. tool diameter: 40mm, speed: 6000rpm. Rear tool carrier: X4 travel: 73mm, Y4 travel: +/-150mm, tool stations: 5, rapid traverse X4/Y4: 15m/min, tool diameter: 40mm, speed: 6000rpm. Including Resy compact belt filter, Knoll 240S-1/100 hinge-belt conveyor, travelling workpiece stop, bar magazine mounting preparation, Brankamp CSM 100 collision monitoring system and FMB Turbo 5-42 X bar magazine, year of manufacture: 2002. Documentation available. An on-site inspection is possible. Nwodpfx Ahszkld Hjksk

Condition: ready for operation (used), A CNC vertical lathe Jungenthal is available. Gear stages: 2, max. speed: 160rpm, max. workpiece height: 800mm, chuck jaws: 6, faceplate diameter: 2000mm, motor power: 50kW, control: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible. Nodpfx Ahozcyqgskjwk