Used Cam Lathe for sale (6,545)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 345, type of input current: three-phase, Equipment: documentation/manual, We are offering this very well-maintained Okuma LB200-M-C CNC lathe, year of manufacture unknown. Rated voltage: 400 V Number of phases: 3 Cedezyfw Sepfx Albsrg Frequency: 50 Hz Maximum power consumption: 20.5 kVA Total current consumption: 29.6 A Maximum motor current consumption: 47 A Current interruption at: 10 kA Diagram No.: W6200-100-956-5 Serial No.: 0345 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: N70089, MACHINE SPECIFICATION Swing over bed 400mm Swing in gap 585mm Swing over cross slide 246mm Crsdpfxezx R Hpo Albeg Distance between centres 1250mm Spindle nose (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Spindle speeds (programmable) 15-2700rpm Tailstock quill taper No. 5 MT Approximate nett weight 2200Kg Machine Equipped with Fanuc OiTC CNC Control System Hydraulic 3 jaw chuck 8 Station turret 8 off VDI toolholders Guarding Coolant system Lighting

Condition: good (used), Year of construction: 2013, functionality: fully functional, The FAMAR TANDEM 400 is a powerful CNC vertical lathe with two independent machining stations. The machine is equipped with driven tools, automatic workpiece loading and unloading, a measuring probe, high-pressure coolant, and coolant filtration. The tandem design enables efficient series production and the simultaneous use of two separate machining stations. Main technical parameters: Standard chuck diameter: 400 mm Maximum chuck diameter: 400 mm Nominal turning diameter: 300 mm Maximum turning diameter: 400 mm Maximum turning length: 480 mm Maximum turning length: 300 mm Number of main spindles: 2 Max. main spindle speed: 4,000 rpm Rated power of main electric spindle: 49.6 kW Rated torque: 458 Nm S6 40% power: 61.7 kW S6 40% torque: 724 Nm Machine dimensions: approx. 3,900 × 3,500 × 3,200 mm Machine weight: approx. 21,000 kg Electrical connection: 400 V / 50 Hz Installed power: 90 kW CE compliant Tooling equipment UTTUM50 – turret for driven tools, size 50 Max. driven tool speed: 8,000 rpm Torque: 100 Nm Power: 15.6 kW UTDUM50 – turret tool disk Size VDI 50 12 tool positions Direct tool drive PPP40 – preparation for 2 hydraulic circuits For special workpiece clamping Piping and valves Control via M-functions Automation TRPAPE20 – 1 automatic circulating pallet conveyor for loading and unloading workpieces A single conveyor system for both workpiece infeed and outfeed Circulating pallet magazine Belt design Pallet occupancy monitoring system Pallet sorting system Working height approx. 950 mm Automatic workpiece loading and unloading via the machine TRPNVBPTE4 – Shuttle system with rotary station Loading/unloading shuttle system Integrated rotary station Including 1 set of jaws for the workpiece AZGRRB500 – set of jaws for Shuttle rotary station MPDM2 – automatic measuring probe Automatic workpiece measurement Coolant, filtration, and chip removal LBCVTT50 – belt conveyor for chips Separate conveyor for chip removal Particularly suitable for short chips, such as cast iron, brass, and some aluminum alloys LBVA760 – coolant tank Volume 760 l LBAP10 – high-pressure pump Pressure 20 bar Internal tool cooling LBFTC – paper filter for coolant Suitable for cast iron and aluminum Filtration of particles approx. 0.08 mm Flow rate max. 60 l/min LBFTTDF – double switchable filter Filtration of particles approx. 0.1 mm Bypass system allowing filter cartridge replacement AZPL – air workpiece position control Additional equipment: CNC control Siemens 840D sl 2 main spindles Driven tools C-axis 12-position turret VDI 50 1 automatic workpiece pallet conveyor Shuttle system with rotary station Automatic measuring probe Separate belt conveyor for chips High-pressure cooling 20 bar Coolant filtration Hydraulic clamping circuits Central lubrication Complete safety guarding Codpfozyp Afsx Albsrg CE The machine is particularly suitable for automated series production of rotational parts, where the two independent machining stations, driven tools, and automatic workpiece handling can be utilized.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: documentation/manual, Machine in production, can be inspected. Machine is running without any defects. Machine is equipped with: - bar feeder FMB - swarf conveyour - increased pressure pump - 2x spindle - front and back drilling tools - live tooles for milling - part coveyour belt - signal lamp Crsdpozx Arqjfx Albog

Condition: like new (used), Year of construction: 2024, functionality: fully functional, MAZAK QUICK TURN 350MY 1500U Max. machining diameter: 420 mm Max. machining length: 1,625 mm Max. milling speed: 5,000 rpm Max. spindle speed: 3,300 rpm Max. bar diameter: 105 mm (!!!) The machine is equipped with: - CNC control system Mazatrol SmoothG - KITAGAWA 3-jaw chuck BR-12, diameter 304 mm - Tool Eye - C-axis Crjdpozyal Defx Albjg - Y-axis - Interface for bar feeder magazine - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: used, Year of construction: 1988, centre distance 1100 mm 840 mm hollow 80 mm ja Codpfx Aljzycrtsberg connected load 18,5 kW digital ja multifix ja weight of the machine ca. 4 t

Condition: used, Year of construction: 2013, overall weight: 5,000 kg, FANUC Series 32i-MODEL B control unit, with TOP AUTOMAZIONI XF365 linear guide. Workholding devices and tools not included. AVAILABLE: November 2026 Codpfezxrz Uex Albsrg

Year of construction: 2010, condition: good (used), CAM Bundler / Stretch Bander with Heat Shrink Tubs + Tubs of Trays Automatic Side loader Infeed All stainless steel 350mm wide x 1550mm long stainless wire mesh belt Side infeed belt 230mm W x 1000mm L 110mm Pusher Stroke Current film 250mm, Max Film 500mm Complete with spare parts Pack Details Size Pot Size Collation Bundle Size D E F 125g 60 ø x 68mm 4 x 3 x 1 180 68 240 Crodjnu Uh Nepfx Albog 125g 60 ø x 68mm 3 x 2 x 1 120 68 180 250g 75 ø x 68mm 4 x 3 x 1 225 75 300 250g 75 ø x 68mm 3 x 2 x 1 150 75 225 125g Tray (2 x 6) N/A 120 68 368 125g Tray (4 x 3) N/A 183 68 246 250g Tray (4 x 3) N/A 234 75 310 250g Tray (2 x 3) N/A 144 75 230

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52000901-01, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, type of input current: AC, overall weight: 3,300 kg, Equipment: documentation/manual, CNC lathe in very good condition for sale. Turret head with 8 tool positions. Hydraulic chuck D160 with numerous spare jaws. Crodpfxozxy Nge Albog Complete documentation is available. For further information or videos, please contact me privately!

Condition: not inspected (used), Year of construction: 1990, functionality: limited functionality, turning length: 600 mm, spindle speed (min.): 4,000 rpm, spindle bore: 65 mm, type of input current: three-phase, total height: 270 mm, total length: 5,000 mm, total width: 220 mm, overall weight: 4,000 kg, No. 202 Monforts RNC 4 without tailstock Machine No. 13772 Serial No. 11914 Codpfx Alezypb Uebjrg Control: GE Fanuc Tool turret: SAUTER turret ø40 • Type 0.5.801.020; • ID No. 070615; • Commercial No. 14-89.44436/7 without chuck without tools Accessories: Chip conveyor KS Kabelschlepp Year of manufacture: 1990 Item No. 3046 ----- 201 Monforts RNC 4 with tailstock Machine No. 137xx Serial No. 119xx Control: GE Fanuc Monforts Control System F SAUTER turret ø 40mm • Type 0.5.801.020; • ID No. 070615; • Commercial No. 14-89.44436/7 without chuck, without tools Accessories: with tailstock Chip conveyor KS Kabelschlepp Year of manufacture: 1990; Item No. 3254 ----- Technical data: RNC 4, RNC series Control: Fanuc 10 T Monforts Control F Max. turning length 600 mm / 1000mm Machine Ø over bed 420 mm Max. swing diameter over cross slide 280 mm Tool turret stations 12 VDI Spindle flange according to DIN 55026 A 6/A 8 Spindle Ø in front bearing 130 mm Material passage through the spindle 65 mm Speed range basic version 5-4000 rpm Tool turret, 12 tool positions: Total power requirement: 22 kW Machine weight approx.: 4 t Space requirement approx.: m The machines have not been in production for several years and were intended to be used as a source of spare parts. The batteries for the control system were replaced regularly. Both machines will be sold as a package. The machine is still connected to the power supply, and the control system starts up without any problems.

Condition: used, Year of construction: 2013, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 750 mm, controller model: FANUC 0i-TC, Equipment: bar feeder, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Z-axis: 750 mm Rapid traverse rate, X-axis: 20 m/min Rapid traverse rate, Z-axis: 24 m/min Spindle speed max.: 3,500 rpm Bar diameter: 75 mm Spindle motor power: approx. 15 / 18.5 kW Tool turret stations: 12 Csdpfxezwghmj Albsrg MACHINE DETAILS Control system: FANUC 0i-TC Number of axes: 2 Dimensions & Weight Dimensions (L x W x H): approx. 3,300 × 1,800 × 1,800 mm Machine weight: approx. 5,500 kg Bar feeder FEDEK DH-65L Bar length: approx. 1,500 mm Bar diameter: approx. 5–65 mm EQUIPMENT Tailstock FEDEK DH-65L bar feeder Bar feeder interface

Condition: good (used), functionality: fully functional, Internal article number: 26059 Mechanic's lathe Weiler Including an extensive accessory package + Four-jaw chuck Röhm 140 + Three-jaw chuck Röhm 140 + Collets "large" + Draw tube for tailstock (suitable for collet set "large") + Collet set "small" and draw tube for tailstock + Turret head + Parting tool support + Hand lever support with Multifix "A" base (installed) Codpfx Aezx Tt Sslberg Speed adjustable via belt 2 speed stages Left-hand/right-hand rotation Dimensions (L x W x H): 120 x 50 x 125 cm Weight: 500 kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is running on our heated storage area of over 500 m².

Condition: good (used), functionality: fully functional, Subject to differential taxation according to §25a of the German VAT Act. You will receive a regular invoice. Internal article number: 26057 Lathe Weiler Matador + Multifix "A" baseplate + 3-jaw chuck + Collets + Coolant pump Center height approx. 150mm Turning diameter over carriage 160mm Turning diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Speed range 30 - 3500 rpm Automatic longitudinal/cross feeds Tailstock MK3 Dimensions (L x W x H): 150 x 70 x 150cm Weight: 600kg Crsdpfx Aszx R R Iolbeg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated storage area of over 500 m².

Condition: used, functionality: fully functional, spindle bore: 100 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 9 rpm, type of input current: three-phase, Manufacturer: Gildemeister Heidenreich&Harbeck Machine type: Centre lathe Condition: functional Centre distance: 2100 mm Swinging diameter over bed: 340 mm Swinging diameter over carriage: 200 mm Csdpfx Aszxpppolbjrg Spindle bore: 100 mm Spindle speed: 9 – 1800 rpm Motor power: 15 kW Mains voltage: 380 V Carriage travel: 300 mm Compound slide travel: 140 mm Tailstock travel: ~ 2000 mm Tailstock spindle diameter: 80 mm Tailstock spindle stroke: 150 mm Tailstock mount: MK5 Bed width: 320 mm / 410 mm Digital measuring system: X-axis, Z-axis

Condition: excellent (used), Year of construction: 2017, SMEC SL2000SY cnc turning center with subspindle Year: 2017 Technical details: Control: iemens 828D Shopturn Swing over bed: 650 mm Max turning diamater x lenght: 395 x 490 mm Max milling diameter: 310 mm Max spindle speed main spindle: 6000 rpm Max spindle speed sub spindle: 6000 rpm Spindle nose: A2-5 Spindle bore diamter: 61 mm Max bar diamaeter through spindle: 52 mm Main spindle and subspindle with C-axis Spindle Motor: 11/18.5 kW X travel: 235 mm Y travel: 105 (+/-52.5) mm Z travel : 580 mm ZB travel ( subspindle ): 580 mm Rapid traveres X,Y,Z,ZB: 24,10,30,24 m/min Number of tool stations: 12/24 ( BMT55 ) Driven tool stations: 12 positions Machine dimensions: 4125 x 1752 x 2100 mm Cjdozyyx Depfx Albsrg Weight: 4150 kgs Accessories/options: Axial tool holders 4 pieces Radial tool holder 2 pieces Driven tool holders, axial, 2 pieces Driven tool holders, radial, 3 pieces Hydraulic chuck for main and subspindle Jaws set for chucks Parts catcher Swarf conveyor Coolant tank Documentations full set Under power in our warehouse, possible to test it anytime!

Condition: good (used), Year of construction: 2015, Haas ST-20 SS Year of manufacture: 2015 Tool setter Tailstock Crjdpfx Aezyymzslbjg Chip conveyor Tooling

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 12081614, type of input current: three-phase, overall weight: 3,300 kg, Title: 5-Axis CNC Machining Center ARIX V450, Year 2012, Functional/In Operation Condition: Functional, in operation Year of Manufacture: 2012 Location: West Saxony Price: Negotiable Technical Data: Manufacturer: ARIX CNC Machines Co., Ltd. (Taiwan) Type: V450 (Mini High Speed Machining Center) Serial Number: 12081614 Credpjzyktfofx Albsg Control: ARIX CNC (Fanuc-compatible) 5-Axis Version (4th/5th axis rotary table) Travel: X 450 mm / Y 350 mm / Z 400 mm Spindle Power: 7.5 kW Tool Magazine: 20 positions (cone magazine) Connection: 400 V, 3-phase, 6 kVA Weight: approx. 3,200 kg Operating Hours: Not documented Description: For sale is a compact 5-axis CNC machining center, ARIX V450, manufactured in 2012, with ARIX CNC control. The machine features a cone magazine with 20 tool positions and is designed for the precise complete machining of smaller to medium-sized workpieces in 5 axes. The machine is functional and currently in operation. Operating hours are not documented. Inspection and test run at the location in West Saxony are possible by arrangement. Price: Negotiable Other machines available from site liquidation. Site takeover negotiable. If you have any questions or require further information, please send us a message or call us.

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 630 mm, turning length: 1,250 mm, total length: 3,420 mm, total width: 1,750 mm, total height: 1,400 mm, type of input current: three-phase, overall weight: 5,200 kg, workpiece weight (max.): 6,000 kg, spindle mount: MK 6, Hello, We are offering a robust, well-maintained SUS 63/1250 lathe. All components are original, and it is in 100% working condition. The lathe was used sporadically in our workshop. It is in continuous operation, connected, and can be inspected. Manufacturer: TOS Turning length: 1250 mm Turning diameter (max.): 655 mm Turning diameter on the cross slide (max.): 390 mm Taper: Morse 6 Weight: 5.2 t Crsdpfx Aszxn R Ejlbsg Main motor: 22 kW (option to install a lower-power motor) Length/width/height: 3420/1750/1400 mm Load capacity: 6 t Spindle bore: 82 mm Rapid feeds Included: - 400 mm self-centering chuck - additional set of jaws - rotary steady rest - set of wrenches - chip/coolant tray - coolant pump - lamp - Technical documentation in Polish + mechanical and electrical diagrams We recently replaced the hydraulic oil with new oil.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: R2EU2002, CNC lathe with main spindle and 12-position turret Manufacturer: EMCO TURN E45 Year of manufacture: 2006, serial number R2EU2002 Control system: Siemens, type Sinumerik Feeding system: EMCO Compact Load E45 Turning diameter: 220mm Chip conveyor: Knoll Attractive offer – flexible and worry-free We offer you not only a high-quality product but also tailor-made financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. Crjdpoyzn N Nefx Albsg Upon request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please feel free to contact us for more information or a non-binding offer. We will provide you with personal and competent advice.

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Crsdpfxezyy D Hs Albeg

Condition: used, Year of construction: 1980, serial number 36884 centre distance 1000 mm 520 mm Crodszmixtspfx Albog weight of the machine ca. 2 t

Condition: used, Year of construction: 2006, overall weight: 4,740 kg, FANUC Series 18i-TB control unit, with TOP AUTOMAZIONI FU350SX hydraulic cylinder – year 2024 Cedpozxr Dcofx Albsrg Workholding fixtures and tools not included. AVAILABLE: November 2026

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 65377, turning diameter over cross slide: 432 mm, turning length: 864 mm, turning diameter: 762 mm, spindle bore: 88 mm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, spindle motor power: 22,000 W, rotational speed (max.): 3,400 rpm, total height: 1,880 mm, total length: 3,800 mm, total width: 1,955 mm, overall weight: 7,250 kg, Equipment: rotational speed infinitely variable, The machine its "as new" Only 3000Hours CNC Controller HAAS Driven tools Turningdiameter 432mm Swing over bed 762mm Turninglenght 864mm Bar diameter 76mm Spindle bor 88mm 12 pos turret VDI 40 Crjdszxqx Espfx Albog Chip convyer Tool presetter

Condition: good (used), Year of construction: 2012, operating hours: 22,156 h, functionality: fully functional, machine/vehicle number: 5011358, turning length: 850 mm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, total height: 2,200 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 6,000 kg, controller manufacturer: TRAUB, controller model: SYSTEM TX 8 i, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power: 36 kW (48.95 HP), Equipment: chip conveyor, TRAUB TNA 400 CNC turning machine Cjdpfx Aszxx Hwjlbsrg - includes powered tool stations as well as Y and C axes - includes chip conveyor FCA D-63843 Niedernberg

Condition: used, Year of construction: 2017, control Heidenhain CNC-Pilot 640 turning length 500 mm spindle tunring speed 5.000 U/min drive capacity - main spindle 100/40% ED 25/34 kW tool taper VDI 30 number of tool places 16 Pos. Number of working hours ca. 29.259 h spindle hours ca. 7.351 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - C-axis and spindle brake (hydraulic) - Y-axis ± 60 mm - Programmable tailstock - Hydraulic hollow clamping unit (Ø 77 mm) - Differential pressure clamping for the main spindle - 16-station disc turret, driven tools for all 16 stations - Coolant system 8/20 bar - Belt filter system (40 µm filtration fineness) - Level monitoring - Connection port for oil mist extractor - Coolant spray gun Crjdpfx Aljzyvcfsbjg - TurnPlus Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.