Used Heavy Lathe for sale (10,038)

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Bwjdpfxewhylvj Amreu Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: used, Year of construction: 1973, turning diameter over bed 2997 mm turning diameter over slide rest 2235 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Bedst Ei Huopfx Amrjwu Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: like new (used), We are offering this Copeland Z9-6MM-30X-AWM in like-new condition, with the year of manufacture unspecified. Bwodez D Erbspfx Amreu We are selling a Copeland semi-hermetic, air-cooled condensing unit, removed from a cold room installation. Specifications: Brand: Copeland Model: Z9-6MM-30X-AWM Frequency: 50 Hz Purchased new in 2021 Professionally dismantled in 2022 In perfect working order Stored indoors since dismantling The equipment can be viewed and collected in the Besançon area. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 1,280 mm, spindle bore: 105 mm, turning diameter: 11,000 mm, center height: 800 mm, feed length X-axis: 800 mm, feed length Z-axis: 11,000 mm, quill stroke: 200 mm, total length: 16,500 mm, total width: 2,100 mm, total height: 2,200 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 1 rpm, type of input current: three-phase, overall weight: 36,000 kg, rapid traverse Y-axis: 4,000 m/min, workpiece weight (max.): 40,000 kg, Heavy Duty Lathe, type TCG 160 x 11m after overhaul: regrinding of the bed and carriage plate, new bearings on the main spindle, new bearings in the tailstock, new control cabinet with new equipment, 100% new wiring, new cable carriers, new paint, geometry according to ISO 1708. The lathe will be ready in January/February 2027. Special equipment: • 1600 mm (63”) dia. faceplate with 4 jaws • 3-point roller steady rest, dia. 100–400 mm Bodpfx Aoz Hvynjmrswu • 3-point roller steady rest, dia. 250–600 mm • set of quadrant gears • electronic tailstock thrust indicator

Condition: used, Year of construction: 1969, functionality: unexamined, For sale is a robust, heavy-duty lathe from Yamazaki / Mazak, model Rex 610 × 1500 (centre distance 1500 mm, swing over bed 610 mm). Ideal for machining large and long workpieces. The machine is in condition commensurate with its age. It has not been tested and is sold as is. Bsdpfx Aexyv Alemrowu Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialised in both Mazak machines and other brands. We place great emphasis on personalised support and are happy to assist you at any time even after your purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All details without guarantee.

Condition: used, Technical details: turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D CNC mit shop turn turning dia. in gap: 1300 mm length of gap: 640 mm spindle bore: 152 mm Bwsdpfx Amou Ix Rpjrsu revolution per minute: 3,5...1000/ 4 steps U/min feed:: x-Achse: 37,24 (m/min) m/min feed:: z-Achse: 21,91 (m/min) m/min force of feed longitudinal: x-Achse: 6,44 (KN) N feed force Z - max.: 17,2 (KN) N tailstock taper MT: MK 6 tailstock quill stroke: 300 mm total power requirement: ca. 30 kW weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Lathe with shop turn Geometric overhaul is in procedure. Equipment: - headstock Morse 6, travel of spindle sleeve 300mm - thread cutting possible (metric thread, inch threads, module threads) - multi quick steel holder swiveable 360° - 3-jaw lathe chuck Ø=630mm - chuck protection - 2 steady rests (Lynettes) (1x fixed + 1x fixed open) - 4 pcs tips for tailstocks - 5 x multi quick change steel holder for chisel - 1 x drill chuck 16mm + 2x drills with MK-cone sleeves 68,5mm & 24,75mm - 1 lot self constructed clamping means Accessories: - face chuck Ø=800mm (adaptation necessary) - CNC turning with shop turn - your benefits at first glance: - flexible programing via graphic interactive (without DIN/ISO knowledge) or text programming with contour definition and cycle support - user friendly operation through practical set up -and measuring operations, clearly arranged tool managment and 3D-Simulation - increase of productivity via supporting PC-Software for work preparation without machine assignment *

Condition: ready for operation (used), Year of construction: 2009, Seiger SLZ 1000 cycle lathe year of construction 2009 center distance 3000mm Circulation over bed 1010 Circulation over facing slide 650 Drive at 100% ED 37KW at 60/ ED 52KW max. torque approx. 9000NM Speed 5-900rpm X Feed force max 240000N Z feed force max 16000N Control Heidenhain Manual Turn with faceplate and steady rest Bodou T Dryspfx Amrowu The offer is aimed exclusively at traders within the meaning of §14 BGB

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Bedpfszww R Sjx Amrowu

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed 1500mm swing over saddle Bodpfx Ajx Hp Iwemrewu 8,000mm between centres Main drive 60kW, 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies 2000mm Bed extension

Condition: used, turning diameter over bed max.: 4000 mm turning diameter over slide rest . mm turning length 7500 mm speed 0-750 u/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Bjdpfx Amoyqt Hkjrjwu If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Technical details: turning diameter over bed: 3800 mm turning diameter over slide rest: 3200 mm turning length: 12000 mm faceplate turning speed range -stepless-: 2 - 200 U/min max. workpiece weight: 90.000 kg bed width: 4000 mm 2 steadies Bedpfxsx Ngzyo Amrewu *

Condition: used, HEIGHT OF CENTERS 700 LENGTH BETWEEN CENTERS 12000 TURNING DIAMETER ON THE BENCH 1400 MM Bedperzt Ekofx Amrewu TURNING DIAMETER ON THE SOCKET 1760 MM TURNING DIAMETER ON THE CARRIAGE 960 MM BENCH WIDTH 700 MM NR SPEED 27 SPINDLE SPEED 3 - 750 RPM SPINDLE HOLE 200 MM TAILSTOCK QUILL DIAMETER 120 MM TAILSTOCK CONE ATTACHMENT 6 CM TAILSTOCK TRAVEL 380 MM RAPID ON THE CARRIAGE CHUCK DIAM. 500 MM NR 01 FIXED REST NR 01 STEADY REST

Condition: used, turning diameter 3.200 mm turning diameter modified: 2.400 mm turning diameter over slide 3.000 mm turning length max. 15.000 mm control Sinumerik 840 D Siemens workpiece weight max. 80.000 kg work accuracy (up to) 0,01 mm turning speed range - main spindle max. 50 min/-1 weight of the machine ca. 154,4 t dimensions of the machine ca. 20,7 x 6,0 m Heavy Duty Lathe ZERBST - DXP 5 / W15x15000 - measurement precision: < 0,01 mm Retrofit 2009 / 2012: - 2009: Control system upgrade to Sinumerik 840D - 2012: - New main gearbox, incl. main spindle drive - Installation of holding brake, incl. electrical integration Bwedpfxowtrz He Amrju - Modification and optimization of cylindrical roller bearings/bearings - Modernization: Control and safety technology

Condition: used, Year of construction: 1988, turning diameter over bed 2000 mm turning diameter over slide rest / mm turning length / mm - Type 1 K 671 320 F3 - Year of manufacture 1988 (first commissioned in 1998) - Turning length 10,000 mm - Turning diameter over bed 2,000 mm (modified) - Faceplate diameter 1,950 mm - Faceplate clamping range 400 - 1,350 mm - Speeds 1.00 - 140 rpm - Torque 125,000 Nm - Main cutting force 130 kN max. - Automatic swiveling tailstock - Max. workpiece weight 70 tonnes - Max. workpiece weight with steady rest 100 tonnes - Drive power 100 kW - Number of bed ways 4 Bodpexn Tz Iofx Amrewu - Dimensions 22,000 x 6,200 x 2,900 mm - CNC control SIEMENS 840D (2010 for €220,000.00) - Support feed X-Z 0.3 - 4,000 mm/min. - Support rapid traverse X-Z 4,000 mm/min. - Inner cone dimensions 140 x 1:7 - The machine complies with CE guidelines - Includes 2 steady rests, 1 roller block, 4 jaws, boring device - Condition: very good condition

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Bwsdsxddvnopfx Amrou Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm turning length 10000 mm turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm spindle bore 82 mm upper head travel 500mm tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t Power 45 KW The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Accessories - Feed guard Bwsdey S Duvepfx Amrou Equipment - 3-axis digital display - 1 x faceplate - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Condition: used, Year of construction: 2013, functionality: fully functional, spindle bore: 105 mm, turning diameter: 800 mm, turning length: 3,000 mm, quill stroke: 240 mm, quill diameter: 100 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 7 rpm, bed width: 600 mm, overall weight: 5,500 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 2 m/min, workpiece weight (max.): 2,000 kg, IMTI SDM 800/3000 – USED HEAVY-DUTY LATHE An IMTI SDM 800/3000, manufactured in 2013, from a company liquidation. Originally an exhibition/demonstration machine in our showroom, sold to the previous owner in 2016. Inspection on-site or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, center distance 3,000 mm - Multifix quick-change tool holder with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm - 3-axis digital display SINO SDS6-3V TECHNICAL DATA - Swing over bed: 800 mm - Swing over cross slide: 1,000 mm - Swing over carriage: 480 mm - Center distance: 3,000 mm - Bed width: 600 mm - Spindle bore: 105 mm, spindle nose DIN 55027 size 11 - Spindle taper: Ø 120 mm, taper 1:20 - Spindle speeds: 7-720 rpm - Thread cutting: metric 1-240 mm (52 steps), inch 1-14 (26 steps), module 0.5-120 mm (53 steps) - Longitudinal feed 0.1-24.3 mm/rev, cross feed 0.05-12.5 mm/rev - Rapid traverse longitudinal/cross: 4,000 / 2,000 mm/min - Tool toolbit cross-section: 50 x 50 mm - Cross slide travel: 420 mm, top slide: 200 mm - Tailstock quill Ø 100 mm, taper MK 6, stroke 240 mm - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Main motor: 11 kW, rapid traverse motor: 1.1 kW - Workpiece weight between centers: max. 2 t, in chuck: max. 500 kg - Total weight: approx. 5,500 kg STANDARD EQUIPMENT - Multifix quick-change tool holder size D1 with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm incl. chuck flanges 350/500 mm - 3-axis digital display SINO SDS6-3V - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Complete coolant system - Fixed center, drive plate, change gears - Electrical end stop longitudinal, halogen machine lamp - German and English technical documentation incl. CE declaration of conformity - 400 V, 50 Hz, 3-phase CONDITION Used machine, manufactured in 2013, from a company liquidation. Sold “as is”, no warranty. Inspection on-site or via video call is highly recommended. OUR SERVICE Online or on-site factory visit, transport organized upon request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact for spare parts and support, member of the FDM, the trade association for wholesale trade in machines and tools. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible. Bwodjzi Dhbepfx Amrju

Condition: used, turning diameter over bed 2100 mm turning diameter over slide rest 1300 mm turning length 6800 mm workpiece weight 25000 kg main drive motor 140 kW Control Siemens type 840 C faceplate 1100 mm bed width 2500 mm steady 800 mm steady 800 mm steady 800 mm steady 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Bedpfeyt Rzkex Amrswu About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter over bed 1650 mm turning diameter over slide rest 1200 mm turning length 7500 mm turning dia. in gap 2500 mm spindle diameter 105 mm speed 3,55 - 180 (x24) U/min voltage 380 V 4-jaw faceplate Ø 1.600 mm Steady rest Ø 700 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Bwjdpfx Ajyqthbemrju Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter over bed 4000 mm turning diameter over slide rest . mm turning length 5000 mm total power requirement 30 kW weight of the machine ca. . t dimensions of the machine ca. . m Specifications Turning length (mm) 5000 Max. turning diameter (mm) 4000 Max. turning diameter at offset (mm) 5000 Speed ??1.4 - 71 (18x) kW 30 Voltage 380V Hz 50 Including: 4-jaw faceplate Ø 3150 mm The tech. Data are manufacturer or operator information and therefore non- Bwjdpjyqtgdofx Amreu binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase Bwedpfx Amozi Duhorou CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: like new (used), MACHINE DATA TORNI TACCHI FTC model 51 OVERALL DIMENSIONS Center distance 4000 m/m Height 1550 m/m Width 1400 m/m Length 6200 m/m Weight 10.000 Kg Swing over bed 1120 m/m Swing over carriage 810 m/m Swing over gap 1350 m/m Bodpod Tm D Ejfx Amrewu Hole through spindle 123 m/m Number of speeds 18 Range of speeds 7-550 / 1’ Horsepower of motor 25HP Morse taper № 6 Metric threads – inch – module – pitch 3 jaw chuck 450 m/m Face plate 850 m/m Extra face plate 1420 m/m Good condition

Condition: used, turning diameter over bed 3800 mm turning diameter over slide rest 3200 mm turning length 12000 mm faceplate diameter 3100 mm steady 2 bed width 4000 mm turning speeds 200 U/min workpiece weight 90.000 kg Hydrostatik Spindellagerung Hydrostatik Lynette The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale Bedpfx Amsyqwa Usrowu apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Technical details: x-Travel: 530 mm table cross travel (Y-axis): 5200 mm w-axis: - mm drilling depth in one stroke: ca. 4000 mm metrical thread cutting: 0,25 -560 M total power requirement: 35 kW bed width: 560 mm centre distance: 5700 mm centre height: 500 mm swing diameter over bed: 1000 mm turning diameter over support: 800 mm range of feed in x - axis: 0,0063 - 4,0 mm/U range of feed in y - axis: 0,0063 - 4,0 mm/U spindle bore: 135 mm range drill spindle revolution per minute: max.1400 U/min range drill spindle revolution per minute: min. 7,1 U/min speed steps work spindle: 24 steps Bwjdpezxlwcofx Amrju tailstock taper MT: MK 6 tailstock quill stroke: 300 mm dimension machine approx.LxWxH: 12,0 x 2,5 x 2,0 m The machine was retrofitted/overhauled in 2007. Special-purpose machine suitable for deep-hole drilling and/or heavy-duty turning operations. Inch thread range: 1/16 – 80 TPI 3-jaw chuck, diameter: Ø 315 mm 2 steady rests Faceplate: Ø 800 mm without jaws PARAT quick-change tool holder, Type 4 3 pieces Coolant system HEIDENHAIN PT 880 4-axis digital readout (DRO) *

Condition: used, Year of construction: 1971, turning diameter over bed 1250 mm turning diameter over slide rest 900 mm turning length 5000 mm faceplate 1250 mm workpiece weight in steadies max. 20000 kg workpiece weight 16000 kg weight of the machine ca. 22 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Bjdpfxjy D A Edj Amrewu Your Markus Hirsch Team