Used Face Lathe for sale (16,855)

Condition: excellent (used), Planspiral.lathe chuck Auto Strong Diameter 310 mm Pedpfeln Uixjx Adnerd Mounting Camlock size 8 Cone diameter 139,735 6 stud diameter 25,4 Pitch circle diameter 171,4 Chuck height including flange 135 mm Weight 53 kg

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition Pjdpfxeu Axzks Adnerd

Year of construction: 1979, condition: good (used), For sale comes: 1 piece used head lathe Manufacturer: WMW Niles Type: DP1/S2 Pjdpfx Asnl D U Ssdnord BJ: 1979 Face plate diameter: 1.250mm Center height above foundation plate: 1.250mm Mass: 19t Connected load: 55Kw Max. Torque at the face plate: 31.500Nm Maximum workpiece mass between centers: 16.000Kg Speed range: 2,24 - 224rpm Documentation available incl. clamping plate 2.600 x 2.000mm Free location Saxony

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 630 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 1,000 mm, The face turning lathe PORĘBA TR-100C has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Pjdjhyg Iyspfx Adnjrd Availability: delivery time 3,5 months, starting from the order Technical specifications: - turning diameter in bridge recess: 1500 mm - turning diameter over bed: 1000 mm - turning diameter over support: 630 mm - bed width: 600 mm - spindle bore diameter: 130 mm - range of rotational speeds (rpm): 5 - 500 - range of feeds (mm/rev): longitudinal: 0.045 – 6 transverse: 0.022 – 8 - engine power: 22/28 kW - overall dimensions: total length: 2700 mm width: 2130 mm height: 1400 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration

Condition: excellent (used), diverse lathe chucks and face plates as shown in the pictures Pjdpfjfr T N Usx Adnerd

Condition: refurbished (used), Year of construction: 1980, turning height: 4,800 mm, Completely retrofitted Single Column Vertical Turning Lathe Blansko SKSJ 1A, equipped with a single vertical head suitable for both turning and milling operations. Pedjw Hfm Nspfx Adnsrd Technical specifications: - Face plate diameter: 6,300 mm - Maximum achievable outer diameter (with column at max. extension): 11,200 mm - Maximum workpiece height: 4,800 mm - Maximum turning diameter (column positioned near face plate): 8,000 mm - Maximum turning diameter (column at maximum extension, for internal turning): 16,000 mm - Infinitely variable face plate speed: 0.5 to 20 rpm - Maximum permissible workpiece weight on face plate: 125 tons The machine underwent a comprehensive retrofit in 2024-2025 and is equipped with the following brand-new components: - New electrical cabinet with CE-compliant components (Siemens, Schrack, etc.) - New Siemens 828 CNC, 100 kW main drive motor, 27 Nm feed motors, and ZF reducers (ratio 1:5) - New ballscrews on 2 axes (vertical head and cross rail) - New Heidenhain absolute scales on 2 axes - Hydraulic and lubrication systems fitted with CE-compliant components (Rexroth, Brevini, Atos, etc.) - New DROPSA (Italy) or equivalent central lubrication system - Geometric accuracy according to ISO standards – as per new-machine specifications For further information, please contact us.

Condition: ready for operation (used), - 500mm faceplate by Bison - good condition Prjdpfx Adsxvmmmoned - individually adjustable jaws - mounting size 8 - 125mm bore - 4x T-slot

Condition: used, Faceplate made of cast steel, probably PUT (Poland), with 4 individually adjustable clamping jaws. Type PUUf-M400C6ZJ, No: 3033. Diameter: 400 mm. Inner diameter: 100 mm. Mounting: short taper DIN 55022 size 6 with 4 M12 mounting bolts. Taper mounting: Ø approx. 106 mm. - 1 set of reversible stepped jaws for turning and drilling. Weight: 56 kg. In good condition. Pedpsxf Uxcefx Adnsrd

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Predpfexpqm Rsx Adnjd Front door: partial opening M0 / full opening

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Predpfx Aexdmgvjdnod Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Year of construction: 2013, condition: used, Computer monitor, screen, TFT industrial monitor, flat screen, industrial monitor touchscreen -Manufacturer: Pro-face, industrial monitor flat screen touchscreen -Type: FP3710-T42-U -Article No.: PFXFP3710T2AU -Model: 3580406-01 Prodpfouh H Efox Adnsd -Dimensions: 475/120/390mm -Weight: 10.4 kg

Condition: refurbished (used), * Machine made in Germany, reelstands from Massenzana. • Single facer 2200mm, profile B, new Friese corrugating rolls. • Brand new Friese steam heads (3pcs). • New condensate valves. • Bridge • Reelstands 2PC – Massenzana • Glue kitchen, 2 tanks 2+3T • Slitter- scorer, longitude Prsdekyt Iiepfx Adnjd • Rewinder, role former ejector • Robust cutter (crossway) • Steam generator Zafa, heating oil 8T tanks. • All unconditional bearings, belts etc. has been replaced (brand new).

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Prsdpfxswhylvj Adnsd Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: used, 630x4000 Under power. Psdpfx Adjcncghonord

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: V16TC1548, workpiece weight (max.): 8,000 kg, workpiece diameter (max.): 2,000 mm, faceplate diameter: 1,600 mm, workpiece height (max.): 1,350 mm, faceplate torque: 18,000 Nm, TECHNICAL DETAILS Faceplate diameter: 1,600 mm Maximum faceplate torque: 18,000 Nm Maximum thread milling diameter: 1,800 mm Maximum facing diameter: 1,800 mm Maximum distance between the faceplate and the clamping surface of the inserted tool slide: 1,550 mm Slide dimensions: 220 × 220 mm Maximum workpiece diameter: 2,000 mm Maximum slide stroke: 900 mm Maximum workpiece height when using the 200 mm tool holder: 1,350 mm Maximum workpiece weight, depending on faceplate rotation: 8,000 kg Maximum tool shank diameter: 40 mm Maximum crossrail travel: 800 mm Crossrail feed rate: 170 mm/min Working feed rate: 1–2,000 mm/min Rapid traverse: 10,000 mm/min Feed per revolution: 0.001–50 mm/rev Rotating tool spindle speed, programmable in two ranges 1st range: 1–1,200 rpm 2nd range: 1,200–2,400 rpm Tool holder: ISO50 MACHINE DETAILS Total power requirement: 80 kW Dimensions & Weight Footprint approx.: 4.4 x 4.62 m Machine weight approx.: 25 t Prodpfx Adsxvxrbensd EQUIPMENT C-axis

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning diameter: 380 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, bar passage: 77 mm, CNC Lathe with Loading and Unloading Robot and Chip Conveyor! TECHNICAL DETAILS Travel X-axis: 230 mm Travel Y-axis: 100 mm Travel Z-axis: 575 mm Maximum machining diameter: 380 mm Maximum cross slide swing diameter: 675 mm Maximum distance between spindles: 541 mm Maximum bar capacity: 77 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 21 m/min Rapid traverse Z-axis: 33 m/min Main Spindle Speed: 4,000 rpm Motor (100% / 30 min): 22 / 26 kW Spindle bore: 88 mm Sub Spindle Speed: 6,000 rpm Motor (25% duty cycle): 7.5 kW Travel: 585 mm Tool Turret with Live Tools Number of stations: 12 Maximum speed: 4,500 rpm Motor: 5.5 kW Tool shank height: 25 mm Tool shank diameter: 40 mm Pedpfsxxl S Tjx Adnerd MACHINE DETAILS Operating hours: approx. 66,000 h DIMENSIONS & WEIGHT Installation area (L x W x H): 285 x 187 x 187 cm Machine weight: 5,400 kg EQUIPMENT Mitsubishi RV-12SL-S12 loading and unloading robot Interface for bar feeder Automatic parts catcher Automatic door High-pressure cooling, 5 bar Chip conveyor

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,412 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,144 mm, controller model: OSP P300L-R, TECHNICAL DETAILS X-axis travel: 235 mm Z-axis travel: 1,144 mm Turning length: 1,000 mm Podexxi Ulspfx Adnord Turning diameter: 300 mm Swing over bed: 450 mm Turret: 12 positions – all driven Spindle speed: 45 – 4,500 rpm Spindle bore: 68 mm Tool holder: VDI 40 MACHINE DETAILS Control: OSP P300L-R Weight: 6,600 kg Operating hours: 24,412 h EQUIPMENT Chip conveyor Chuck diameter 250 mm Touch setter Tailstock

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: M212/0062, turning length: 200 mm, spindle speed (max.): 12,000 rpm, bar diameter (max.): 12 mm, counter spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, In recent years, investments exceeding €25,000 have been made in maintenance and repairs. Occasionally, a system error occurs (sporadically, e.g., after 2–5 days of operation); after powering the machine off and on, it is fully operational again. TECHNICAL DETAILS Max. bar diameter: 12 mm Max. machining length: 200 mm Axes: 7 linear axes + C-axes for main and sub-spindle Main spindle Spindle bore max.: approx. 14 mm Motor power: approx. 2.2 kW Speed range: 200 – 12,000 rpm Indexing: C-axis, full-C (0.001°) Front machining max. drilling diameter: 6 mm Max. thread: M6 Sub-spindle Clamping diameter max.: 12 mm Part length, rear side: 125 mm Max. drilling diameter: 5 mm Max. thread: M5 Speed range: 250 – 6,000 rpm Gang tool holder Pjdpfxexxlw No Adnerd Max. drilling diameter: 5 mm Max. thread: M4 Max. speed: 200 – 8,000 rpm Turret Max. drilling diameter: 5 mm Max. thread: M5 Max. speed: 200 – 6,500 rpm Back working tools Max. drilling diameter: 5 mm Max. thread: M5 Speed: up to 8,000 rpm Tools Tool stations: 21 positions Gang slide: 8 positions Turret: 10 positions Back working tools: 3 positions Turning tool shank: 10 × 10 mm Drill bush diameter: 19.05 mm Rapid traverse X/Z/Y: 32 m/min Rapid traverse X2/Y2: approx. 8–16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & weight Footprint L × W × H: approx. 2.5 m × 1.25 m × 1.7 m Weight: approx. 2,500 kg Power consumption (rated): approx. 6 kVA EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, operating hours: 6,615 h, functionality: fully functional, machine/vehicle number: R2EV3403, turning length: 310 mm, turning diameter: 220 mm, spindle speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, bar passage: 45 mm, TECHNICAL DETAILS Work Area Swing over bed: 430 mm Max. turning diameter: 220 mm Max. turning length: 310 mm Max. bar capacity: 45 mm Distance between centers: 687 mm Carriage Travel X-axis travel: 160 mm Z-axis travel: 310 mm Main Spindle Spindle nose to DIN: 55026 KK5 Front spindle bearing diameter: 80 mm Hollow clamping cylinder max. through bore: 45 mm Max. chuck size: 160 mm Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C Axis (Rotary Axis) Resolution: 0.001° Spindle indexing (disc brake, for driven tools): 0.01° Feed Drives Feed force X: 4 N Predpfx Adoxvrv Tonjd Feed force Z: 6 N Rapid traverse speed X: 20 m/min Rapid traverse speed Z: 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning spread P₉ as per VDI 3441 in X/Z: 3 / 3 µm Tool System Tool holders to DIN: 69880 VDI30 Tool cross section for square shank tools: 20 x 20 mm Shank diameter for boring bars: Ø32 mm Number of tool stations / powered (option): 12 / 6 Turret indexing time: 0.14 s MACHINE DETAILS Total power requirement: 17 kW Dimensions & Weight Footprint: 2.25 x 1.63 x 1.94 m Machine weight: 3.3 t Operating hours: 6,615 h EQUIPMENT - Integrated holding brake for driven tools - Disc turret with direction logic - AC motors on X and Z axes

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1212/0058, turning length: 200 mm, spindle speed (max.): 12,000 rpm, bar diameter (max.): 12 mm, counter spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 21, TECHNICAL DETAILS Maximum bar diameter: 12 mm Maximum machining length: 200 mm Axes: 7 linear axes + C axes for main and sub-spindle Main Spindle Spindle bore: 14 mm Motor power: 2.2 kW Speed range: 200 – 12,000 rpm Indexing: C axis, full-C (0.001°) Front machining maximum drilling diameter: 6 mm Maximum thread: M6 Sub-Spindle Predpfjxxlvrox Adned Maximum clamping diameter: 12 mm Part length (back side): 125 mm Maximum drilling diameter: 5 mm Maximum thread: M5 Maximum speed range: 250 – 6,000 rpm Gang Tool Holder Maximum drilling diameter: 5 mm Maximum thread: M4 Maximum speed: 200 – 8,000 rpm Turret Maximum drilling diameter: 5 mm Maximum thread: M5 Maximum speed: 200 – 6,500 rpm Maximum thread: M5 Maximum speed: 8,000 rpm Tool Stations Total tool capacity: 21 positions Gang slide: 8 positions Turret: 10 positions Back working tools: 3 positions Tool Holders Turning tool: 10 × 10 mm Drill sleeves: diameter 19.05 mm Rapid traverse X/Z/Y: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.5 m × 1.25 m × 1.7 m Weight: 2,500 kg Power Consumption (Rated): 6 kVA EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: R6A N3602, turning length: 520 mm, turning diameter: 360 mm, overall weight: 3,800 kg, TECHNICAL DETAILS Turning diameter: 360 mm Prjdpfx Adoxvrrujnjd Turning length: 520 mm MACHINE DETAILS Total power requirement: 20 kW Dimensions & Weight Required space: 3 x 2 x 2 m Machine weight: 3.8 t

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1216/0166, spindle speed (max.): 10,000 rpm, bar diameter (max.): 16 mm, counter spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 21, Equipment: chip conveyor, TECHNICAL DETAILS Max. Bar Diameter: 16 mm Axes: 7 linear axes + C-axes for main and sub spindle Main Spindle Prodpfx Aoxxlryjdned Spindle bore (main spindle): 18 mm Main spindle motor power: 3.7 kW Main spindle speed range: 10,000 rpm Main spindle indexing: C-axis, Full-C (0.001°) Max. drilling diameter (main spindle): 10 mm Max. thread size (main spindle): M8 / M6 Sub Spindle Max. clamping diameter (sub spindle): 16 mm Workpiece length (sub spindle): 125 mm Max. drilling diameter (sub spindle): 8 mm Max. thread size (back side): M6 Sub spindle speed range: 250 – 6,000 rpm (Full C-axis) Gang Tool Carrier Max. drilling diameter: 4.8 mm Max. thread size: M4 Max. speed: 200 – 8,000 rpm Turret Max. drilling diameter: 4.8 mm Max. thread size: M5 Max. speed: 200 – 6,500 / 8,000 rpm Driven Tools on the Back Side Max. drilling diameter: 5 mm Max. thread size: M5 Max. speed: up to 8,000 rpm Tools Total tool capacity: 21 positions Gang slide: 8 positions Turret: 10 positions Back side tools: 3 positions Turning tool shank: 10 × 10 mm Drill sleeve shank diameter: 19.05 mm Rapid traverse X/Z/Y: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.0 m × 1.05 m × 1.7 m Weight: 2,500 – 2,950 kg Power Consumption (Rated): 7.9 kVA Main switch: 40 A EQUIPMENT Chip conveyor Parts conveyor Parts catcher Fire extinguishing system

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: R2AP3901, turning length: 700 mm, turning diameter: 220 mm, travel distance X-axis: 160 mm, turning diameter over bed slide: 430 mm, workpiece length (max.): 510 mm, TECHNICAL DETAILS Turning diameter: 220 mm Turning length: 700 mm / 665 mm Swing diameter over bed: 430 mm Max. part length: 510 mm X-axis travel: 160 mm Spindle bore diameter: 45 mm Psdpfx Aoxvrn Nsdnerd MACHINE DETAILS Total power requirement: 17 kW Dimensions & Weight Required space approx.: 2.63 x 1.98 x 1.94 m Machine weight approx.: 2.6 t

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: M216/0316, spindle speed (max.): 10,000 rpm, bar diameter (max.): 16 mm, clamping diameter: 16 mm, counter spindle speed (max.): 8,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Axes: 7 linear axes + C-axes for main and sub spindle Main Spindle Motor power: 3.7 kW Speed range: 10,000 rpm Podpfsxxll Tsx Adnord Indexing: 0.001° full C-axis Max. drilling diameter, frontal machining: 10 mm Max. thread size, frontal machining: M8 / M6 Sub Spindle Max. clamping diameter: 16 mm Workpiece length: 125 mm Max. drilling diameter: 8 mm Max. thread size, rear side: M6 Speed range: 250 – 6,000 rpm Gang Tool Holder (upper) Max. drilling diameter: 4.8 mm Max. thread size: M4 Speed: 200 – 8,000 rpm Turret, driven tools: Max. drilling diameter: 4.8 mm Max. thread size: M5 Speed: 200 – 6,500 / 8,000 rpm Driven Tools, rear side Max. drilling diameter: 5 mm Max. thread size: M5 Max. speed: 8,000 rpm Tools Tool stations: 21 Gang slide: 8 positions Turret: 10 positions Rear side tools: 3 positions Tool Holders Turning tool shank: 10 × 10 mm Drill sleeve diameter: 19.05 mm Rapid Traverse Rapid traverse X/Y/Z: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.0 m × 1.05 m × 1.7 m Weight: 2,500 – 2,950 kg Power consumption (nominal): 7.9 kVA Main switch: 40 A EQUIPMENT Chip conveyor Parts conveyor belt Parts catcher Fire extinguishing system

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S.1003825.001, faceplate diameter: 800 mm, workpiece length (max.): 800 mm, workpiece width (max.): 720 mm, TECHNICAL DETAILS Faceplate diameter: 800 mm Clamping diameter: 800 mm Max. workpiece dimensions: 800 x 720 mm Tool interface: Capto C6 Tool magazine positions: 2 x 80 Pedsxvrhvspfx Adnjrd MACHINE DETAILS Total power requirement: 110 kW Dimensions & Weight Approximate machine weight: 37,000 kg / total 52,000 kg Transport dimensions (machine): 5.07 x 2.98 x 3.90 m EQUIPMENT C-axis