Used Arburg A 270 C 500 100 Art 592 for sale (325)

Condition: good (used), Year of construction: 2002, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 427 cm³, injection pressure: 2,080 bar, mold height (min.): 300 mm, Technical Data – Arburg 570C 2000-675 General Information: Year of manufacture: 2002 Control system: Selogica Injection unit: Type: … / 675 Screw diameter: 55 mm Specific injection pressure: 2080 bar Shot volume: 427 cm³ Fodpeyxnr Sofx Ah Negc Clamping unit: Type: 2000 / … Clamping force: 200 t Platen dimensions: 950 × 950 mm Tie bar spacing: 570 × 570 mm Mold height: 300 mm Opening stroke: 650 mm Maximum platen distance: 950 mm

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Fgjdpfx Asyym Sajh Noc

Year of construction: 2007, condition: ready for operation (used), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical main movements by servo drives: dosing, injection, mold open/close, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal 400 injection unit • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing assembly D25 mm, high wear/corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heater band (320/00) (Pos 060/25) • Heater band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mold height adjustment • Prepared for mounting a linear robot on the fixed platen • Mold protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blow unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, electrical cabinet, interfaces: • Selogica control • Software packages (Pos 555/01–555/07): Extended mechanical cycle controls; Extended movements; Production control; Optimization/Operator assistance; Quality assurance control; Documentation • Temperature-regulated electrical cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mold temperature measurement zones (Pos 469/12) • Additional heater band for nozzle (Pos 468/01) • Interface for HB-Therm mold temperature controller (Pos 453/01) Fgedpfx Aex D Hgvjh Njc • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for color dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/bad parts (Pos 375/00)

Condition: excellent (used), Year of construction: 1999, 1,0 St. gebr. Spritzgießmaschine mit Roboter Fodsu E E Hlepfx Ah Nogc Hersteller: ARBURG Typ: 420C1000-350 Baujahr: 1999 Schließkraft: 100 Tonnen Holmabstand 420 x 420 mm Schnecken DN: 40 mm Dosiervolumen: 182 ccm³ Spritzteilgewicht 172 g/PS Steuerung: SELGOCIA Ausstattung: -Roboter, Hersteller: GEIGER, Typ: LR21, BJ 1998 -2 x Kernzug

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. Fgodpfol Tnz Esx Ah Nsc We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Fodpeyddy Iefx Ah Negc

Year of construction: 2013, condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, distance between tie bars: 420mm, max. injection volume: 144cm³, operating hours: 54164h. Documentation available. On-site inspection is possible. Fedpst E Trbsfx Ah Nogc

Year of construction: 2002, condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Fgedpfx Ahjum U S Ej Njc

Year of construction: 2018, condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Fgjdpfxsr N Rh Hj Ah Nsc

Year of construction: 1999, condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible. Fjdpet E Trhefx Ah Negc

Year of construction: 1998, operating hours: 62,144 h, condition: ready for operation (used), Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Fjdjv Ifwxjpfx Ah Nsgc

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible. Fsdoyddzfepfx Ah Negc

Year of construction: 2007, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible. Fsdpfx Aoyddzleh Nsgc

Condition: excellent (used), Year of construction: 2007, operating hours: 63,600 h, clamping force: 1,500 kN, screw diameter: 60 mm, injection pressure: 1,390 bar, injection weight: 487 g, Arburg 520A-1500-800 (207) General information Product Code: 207 Availability: In Stock Year of production: 2007 Brand: Arburg Technical data Shot Weight: 487 g Clamping Force: 1,500 kN Fjdevt S Nxspfx Ah Njgc Condition: Used Screw dia: 60 mm Injection pressure: 1390 bar Tie bar distance: 520 x 520 mm Platen size: 700 x 700 mm Type of controls: Selogica Language: German Power: 74 kW Workinghours: 63.600 h Weight: 7300 kg Dimensions: 6 m x 2,4m m Hopper: No

Condition: excellent (used), Year of construction: 2003, clamping force: 1,500 kN, screw diameter: 45 mm, injection pressure: 1,670 bar, injection weight: 210 g, Arburg 470C-1500-350(166) General information Product Code: 166 Availability: In Stock Year of production: 2003 Brand: Arburg Fodpfxjvt S Ego Ah Negc Technical data Shot Weight: 210 g Clamping Force: 1,500 kN Screw dia: 45 mm Injection pressure: 1670 bar Tie bar distance: 470x470 mm Platen size: 650x650 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 40,2 kW Workinghours: 83824 h Weight: 4410 kg Dimensions: 4,5 x 1,8 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 2001, operating hours: 89,240 h, clamping force: 1,000 kN, screw diameter: 45 mm, injection pressure: 1,670 bar, injection weight: 210 g, Arburg 420C-1000-350 (174) sold without conveyor belt Product Code: 174 Availability: In Stock Year of production: 2001 Brand: Arburg Technical data Shot Weight: 210 g Clamping Force: 1,000 kN Screw dia: 45 mm Injection pressure: 1670 bar Tie bar distance: 420x420 mm Platen size: 570x570 mm Mould height min.: 250 mm Fjdpfxevt Rzas Ah Nogc Type of controls: Selogica Language: German Power: 32,2 kW Workinghours: 89.240 h Weight: 3430 kg Dimensions: 4,4x1,7 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 2003, Arburg 420C-800-250 Closing 80 tons Scrow 30 mm Fsdpfxopdr Dcj Ah Njgc year 2003 Spars wide 42x42 Spray weight 97 g

Condition: excellent (used), A10VSO 100DRS/32R-VPB32UB2, Fgodpeu Dk Ryjfx Ah Nsc A10VSO 18DFR1/31R-VRA12KB2-S3608, UNIVERSAL HYDRAULIK SSPA-6/136-A-N-R-V0-01 1000001429

Condition: excellent (used), Year of construction: 2006, operating hours: 95,822 h, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 188 cm³, injection pressure: 1,530 bar, injection weight: 172 g, mold height (min.): 250 mm, Arburg 420C-1000-290 injection molding machine with sorting flap Number: 239 Availability: in stock Year of production: 2006 Producer: Arburg Screw diameter [mm]: 40 Injection weight [g]: 172 Injection pressure [bar]: 1530 Closing force [kN]: 1000 Column spacing [mm]: 420x420 Plate size [mm]: 570×570 Min. form height [mm]: 250 Control type: Selogica Tongue: german Fodjwwi Huspfx Ah Negc Installed power [kW]: 21.4 Working hours [h]: 95822 Weight [kg]: 3700 Dimensions [mm]: 4400×2000 Feed hopper: NO Robot nest: Yes Core string: Yes

Condition: good (used), Power supply removed from an operational Arburg 420 C 1000-350/150 Manufacturer: MGV Type: P4311-05159-1 Serial number: 298.054 Fgedsw Tkdxepfx Ah Noc

Condition: like new (used), Year of construction: 2023, INJECTION MOLDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Fgodpfx Ahjxzklqe Njc Year of manufacture: 2023 Technical Specifications Clamping Unit: Clamping force: 1000 kN – ensures high process stability Rotary table diameter: 1300 mm – optimizes production cycle Usable mold mounting area: 800 × 590 mm Minimum mold height: 300 mm Maximum daylight between platens: 585 mm Injection Unit (3 interchangeable cylinders): Cylinder Ø 30 mm: 83 cm³ at 2200 bar Cylinder Ø 40 mm: 140 cm³ at 1250 bar Cylinder Ø 20 mm: 36 cm³ at 2500 bar Additional equipment: - 2 hydraulic cores – for operating complex molds - 2 pneumatic valves – for additional mold functionalities - GK control – enables direct control of 3 heating zones from the machine - SELOGICA DIRECT control system – precise process control, capability for custom sequence programming Year of manufacture: 08/2023 Pump operating hours: 1062 h Detailed Description The machine is fitted with a hydraulic system featuring two energy-efficient variable displacement pumps and a servo valve for precise pressure and movement control. The hydraulic power unit is mounted outside the injection molding machine’s frame, significantly reducing operational noise. Thanks to precision filters and low oil volume, the oil change interval is extended to 20,000 hours. T2 servo-regulation technology includes: - Two adjustable variable delivery pumps - Programmable, adjustable, and stabilized clamping force - Programmable and manually adjustable nozzle contact force - Capability for simultaneous (parallel) movements (nozzle, ejector, cores) The machine is also equipped with: - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of main drive operation, reducing energy consumption by smoothly adjusting pump speed according to machine load (for 15–75 kW motors, 380–480V, 50–60 Hz). Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a Ø 125 mm centering hole.

Condition: excellent (used), Year of construction: 2011, 2x ARBURG A 170 S 180-30 Trennebene (S&P 3798) Manufacture year: 2011 Operating hours: 38,396 Stunden Screw: 15 mm Injection pressure: 2200 bar Stroke volume: 10,6 cm³ Clamping Force: 18 t Tie bar distance: 170 x 170 mm Mould installation height min.: 150 mm Plate distance max.: 350 mm Dimensions: 2600 x 1400 x 2000 mm Eeight: 1720 kg Connected load: 11 + 4 = 15 kW price: on request Option parting line, hotrunner 6x, Robot Interface EM67, Interface Colorizing, corepuller, crane 350 kg Fodpfx Aezcwi Tjh Nsgc Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request contact: Mr. Ralf Schulz Fedpfxozcwhpo Ah Negc

Condition: like new (used), Year of construction: 2006, Clamping force: 220 tons Opening stroke: 650 mm Mould height: 300 mm Clamping platen daylight: 950 mm Tie bar daylight: 570 x 570 mm Mould clamping plattens (b x h) : 795 x 795 mm Ejector stroke: 225 mm Screw diameter: 50 mm Screw stroke: 200 mm Injection volume: 392 cm3 Shot weight: 359 g Fodpfxjy Txgcs Ah Nsgc Injection pressure: 2000 bar Working hours: 10.444 Core pullers: 1x

Condition: used, Injection molding machine ARBURG 420 C - 1300 350/350 Fgsdpfx Ahsy Uzdgo Nec Condition: used / see pictures...