Used C200 for sale (189)

Condition: excellent (used), Year of construction: 2016, operating hours: 5,397 h, functionality: fully functional, first registration: 12/2016, overall weight: 4,000 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,200 kg, empty load weight: 2,800 kg, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, suspension: steel, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, electronic stability program (ESP), fog lights, hydraulics, An authorized SUBARU dealership in Łaziska Górne offers a compact JOHNSTON, now BUCHER JOHNSTON model C200 sweeper, sourced from Sweden from a company specializing in cleaning roads and large facilities. The machine is well-suited for work on sidewalks or in densely populated residential areas due to its small, compact dimensions. This sweeper comes from its first owner, who had over 20 units in their fleet, and all were serviced according to the manufacturer's recommendations. The machine is designed for maintaining the cleanliness of roads, sidewalks, parking lots, squares, urban areas, industrial plants, logistics centers, and municipal areas. The Johnston C201 is a highly regarded and proven suction sweeper, characterized by its compact dimensions, high maneuverability, and high work efficiency in urban environments. Cabin equipment: Radio Air conditioning Rearview camera Brand: Johnston Sweepers Model: C201 / C200 Year of manufacture: 2016 Serial number: 2000 / 207006 / 03 / 16 GVWR: 4000 kg Permissible total weight: 4750 kg Permissible front axle load: 1970 kg Permissible rear axle load: 2030 kg Certificate: PM10 Certified CE marking: Yes Noise level LWA: 103 dB Machine type: compact suction road sweeper Waste container capacity: 1.8 m³ Usable container capacity: approximately 1.5 m³ Fuel tank: 52 l Clean water tank: approximately 152–175 l, depending on the version Water recirculation system: approximately 250 l Total water system capacity: approximately 402–425 l Drive: hydrostatic Sweeping working speed: 0–16 km/h Travel speed: up to 40/50 km/h, depending on the CN/CX version Theoretical sweeping performance: up to 36,800 m²/h Climbing ability: up to 30% Suction nozzle width: approximately 815 mm Brush diameter: approximately 850 mm Container discharge height: approximately 1545 mm DIMENSIONS: Overall length: approximately 4270 mm Overall width: approximately 1315 mm Overall height: approximately 1985 mm MACHINE DESCRIPTION: The Johnston C201 / C200 is a compact suction road sweeper that performs excellently in urban and municipal work. Thanks to its small dimensions, the machine is very maneuverable and can operate in places where larger sweepers have limited maneuvering capabilities. The machine is ideally suited for cleaning streets, sidewalks, bus bays, parking lots, maneuvering areas, industrial areas, residential areas, city centers, and private properties. The suction system, together with the side brushes, effectively collects sand, dust, leaves, small debris, and road dirt. A major advantage of this machine is its 4000 kg GVWR, which means a higher permissible total weight than in the 3.5-ton versions. The machine has a PM10 certificate, CE marking, and a Johnston Sweepers factory nameplate. APPLICATION: Maintaining the cleanliness of roads and streets Cleaning sidewalks and paths Municipal work Cleaning parking lots and squares Maintaining industrial areas Serving municipalities, cities, and municipal companies Work at logistics centers and production facilities Cleaning private and residential areas The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. Please contact us directly by phone to get your best price. Kjdpfsy U Nidjx Aa Eedp

Condition: ready for operation (used), Year of construction: 2011, A used CNC turning machine, Index C200, with a wide range of accessories. Technical specifications will be added. Kdsdpfx Aaezhdk Ho Eop

Condition: ready for operation (used), Year of construction: 2016, laser power: 200 W, Laser engraving machine manufactured in 2016. This Trotec SP500 C200 features a powerful 200W CO2 laser source and a generous working area of 1240 × 710 mm. With only 1,550 working hours, it remains in excellent condition and has been used solely for paper and cardboard cutting. If you are looking to get high-quality laser cutting and engraving capabilities, consider the Trotec SP500 C200 machine we have for sale. Contact us for further details. • Laser source: 200 W CO2 • Working area: 1240 × 710 mm • Working hours: 1,550 h • Condition: Excellent/mint • Ownership/usage: Single owner; used only for paper and cardboard • Integrated equipment/options: • JobControl Vision camera system • Autofocus system (high-precision electro-optical) • Laser pointer • Electronically controlled Z-axis • Air-assist with integrated compressor • Dust Protection Pack Technology • JobControl Expert software • Pass-through system • Tables: Honeycomb table; Slat cutting table; White acrylic + aluminum table • Optics: 2.0" precision lens + additional optics package (2.0", 2.5", 5.0") • Gas kit • Commercial info: • Machine under power; available for inspection and cutting tests • Location: Modena, Italy • Note: 24 months warranty originally included Additional equipment Kjdpfxszarzre Aa Eodp • Industrial water chiller • Professional mobile fume extraction system • H13 washable filter cartridges • Additional spare filter cartridge • Pneumatic pulse-cleaning system • 1.5 HP extraction fan motor • Double activated carbon filtration cell • Full package sale includes: Laser machine + chiller + professional fume extractor

Condition: excellent (used), Year of construction: 2009, operating hours: 29,000 h, functionality: fully functional, Equipment: documentation/manual, The INDEX C200 – manufactured in 2009 – is a powerful CNC production turning center with a FANUC 31i control, main and counter spindle, and a 65 mm bar capacity. The machine features a high-quality 3-turret design, with turrets 1 and 2 each equipped with X, Z, and Y axes, and turret 3 used for machining on the counter spindle. All three disc turrets are equipped with 10 stations and, with driven tools up to 6,000 rpm, enable highly flexible complete machining. With a portal parts handler, conveyor belt, C-axes on the main and counter spindles, and powerful spindle drives, the machine is particularly suitable for productive series production of complex turned/milled parts. Control: FANUC 31i Design: Machine with 3 tool holders / 3 disc turrets Bar capacity: 65 mm Machine bed: Vertically arranged gray cast iron machine bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose: ISO 702/1, Size 140 Cyl. Chuck diameter: 160 mm Power: 25 kW at 100% ED / 33 kW at 40% ED Torque: 112 Nm at 100% ED / 150 Nm at 40% ED Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose: ISO 702/1, Size 140 Cyl. Chuck diameter: 160 mm Power: 25 kW at 100% ED / 33 kW at 40% ED Torque: 112 Nm at 100% ED / 150 Nm at 40% ED Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Z-axis: 700 mm travel Rapid traverse Z-axis: 50 m/min Tool holder / Turret Design with 3 disc turrets, each with 10 stations. Tool system with 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool holder 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (according to documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool holder 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool holder 3 X-axis Kedpfsy Tmhzox Aa Ejdp 10 stations Used exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment according to documentation Portal parts handling system with numerically controlled Z-axis Workpiece removal from main or counter spindle to conveyor belt Removal of scrap material from the main spindle into a scrap container Portal parts handler: Traverse speed: 100 m/min Traverse range: 70 mm Workpiece diameter max.: 90 mm Workpiece length max.: 250 mm Scrap length max.: 250 mm Workpiece weight max.: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Coolant circuit: Flow rate: 19 l/min Coolant unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Condition: used, Year of construction: 1989, Batch fluidised bed dryer in stainless steel with spray granulation. Manufacturer : Glatt Model: WSG-C200 Year: 1989 Previous use: pharmaceutical Product pan capacity: 700 litres. Product capacity: 200 – 280 Kg Air filtration and heating battery. Bag filtration Heat exchange: tubular Temperature control: multiple sensors Spraying: yes Watson Marlow peristaltic pump Spray nozzle Frame and tower: 316 stainless steel Kdsdpfxex R An Se Aa Ejp Electrical cabinet Sold with 2 pans and protective pockets Trolley reverser: available Documentation: available in German Spare parts Valves available Fan not available. Hot water generator / boiler not available

Condition: used, Year of construction: 2011, turning diameter 160 mm turning length 550 mm control Siemens weight of the machine ca. 9000 kg Kdedpfeyuzfpex Aa Ejp

Condition: used, power capacity 30 kW volt 380 V ampere 58 A new motor with options G45 und K42 Data please see typeplate. Kdodped Ihafofx Aa Esp

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Kdjdpfoud R T Sox Aa Eep

Condition: used, Year of construction: 1987, Technical details: pressure: 200 t chamfer lenght: 4000 mm distance between columns: 3530 mm control for program: DNC 7000 max. stroke: 220 / min: 200 mm throat: 320 mm ajustment speed: 70 - 80 mm/sec working feed: 10 mm/sec return speed: 49 mm/sec back gauge: 700mm motorisch Kdjdpsu Icc Aefx Aa Esp table-size: L x B: 4110 x 180 mm work height max.: inkl. Tischverlängerung mm interface: RS 232 connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: gesamt: 17,0 t machine dimensions LxWxH: 4,6 x 1,6 x 3,3 m incl. 2 pieces table extensions rear support 700mm travel motorized and 2 pieces support blocks with travel 1500mm motorized right/left operation via control panel swiveling and 2x foot operation Hydraulics: max. pressure 318bar; oil filling approx. 170 liters; pump capacity 19.3 l/min. Control DNC 7000, graphic display, PC software equipment: Cutting zone lighting stroke counter div. Tools optional *

Condition: used, Year of construction: 2018, functionality: fully functional, Used Horizon Booklet Making System (2018) 1. System Configuration VAC-1000, BC-20, SW-20, SPF-200A, HP-200A, FC-200A, SC-200 Interface Language: Japanese 2. Machine Overview The Horizon VAC-1000 Booklet Making System is designed for high-quality booklet production from offset or digitally printed sheets. It offers reliable feeding, precise collation, and professional booklet finishing, making it suitable for commercial printers and digital print shops. 3. VAC-1000 Air Suction Collator (Specifications) Model: Horizon VAC-1000 Kedpszl Nivofx Aa Eodp Feeding System: Air Suction Rotor Feeding Number of Bins: 10 Bins (Expandable) Maximum Sheet Size: 350 × 500 mm Minimum Sheet Size: 148 × 148 mm Maximum Speed: Up to 9,900 sets/hour (10-bin configuration) Features: Double-feed detection, Block Feed, Cover Feed, Wireless Remote Control Power Supply: Single Phase 200 V, 50/60 Hz 4. SPF-200A Stitcher & Folder (Specifications) Function: Saddle Stitching & Folding Maximum Sheet Size: 356 × 508 mm Minimum Sheet Size: 120 × 180 mm Maximum Stitch Thickness: 4 mm (Approx. 48 sheets of 64 gsm paper) Production Speed: Up to 4,500 booklets/hour (A5) Up to 4,000 booklets/hour (A4) Stitch Modes: Saddle Stitch, Top Stitch, Corner Stitch, Fold Only Compatible Units: VAC-1000, HP-200A, FC-200A, SC-200 Power Supply: Single Phase 200 V, 50/60 Hz

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distances X=2000 mm, Y=1500 mm, Z=1250 mm - Siemens 840 DsL CNC control - NC rotary table for 4-sided machining, 1250 mm x 1250 mm - Horizontal spindle HSK100 - Spindle: 2500 rpm, HSK 100, 2200 Nm spindle torque - Approx. 9,500 spindle hours - Tool changer system HSK 100 / 40 stations - Chip conveyor - Internal/external air blow-off device - Minimum quantity lubrication for dry machining of castings Kdodpfszluq Sjx Aa Ejp - Full enclosure - Large interference circle 2300 mm - Double pallet changer - Short delivery time, subject to prior sale - Year of construction: 2010 Coolant supply available as an option - ICS 60 bar for deep hole machining

Condition: good (used), Horizon VAC-100a + VAC-100m + SPF-200a + FC-200a Booklet Maker The machine is fully operational and ready for production. Very low mileage. This is one of the newest Horizon models. The entire machine is set up from the control panel. Made in Japan. The line consists of: – Horizon VAC-100a / VAC-100m Max size: 350x500mm Min size: 120x148mm Vacuum feeding 10 shelves Stack height: 55mm Basic weight: 40-270g Power supply: 230V Weight: 310kg/piece Touchscreen control Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Kdedpfozlf T Dex Aa Eop Horizon SPF-200A 10.4″ color touchscreen Non-stop operation thanks to the mis-assembly ejection function Max size: 508x356mm; Min size: 180x120mm Max speed: 4500 booklets/hour Weight: 500kg Stitching Wire-folding Two Hohner heads Up to 200 jobs can be saved in the machine’s memory. Additional options include wire feed control and a block stitching module. Horizon FC-200A Cutting thickness 4-5mm 230V power supply Weight 244 kg New trimmer design, stable operation with servo motors, and additional booklet guide. Touch panel for quick format changes. Reset the machine to a different format with a single click. The machine includes: LC-200 delivery, operating tools, spare parts, and documentation.

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with side-mounted Arburg Multilift robot 2K (two-component) machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Kdedpfx Aaozc N Tws Eep Price: On request

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection weight: 359 g, mold height (min.): 300 mm, Year of manufacture: 2018 Clamping force: 200 tons Distance between tie bars: 570 x 570 mm Screw diameter: 50 mm Injection volume: 392 cm³ Injection weight: 359 g Full equipment: Robot, conveyor belt, hot runner controller, etc. Kdjdozmg Daopfx Aa Eop

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection weight: 359 g, mold height (min.): 300 mm, Year of manufacture: 2014 Clamping force: 200 tons Light pillar spacing: 570 x 570 mm Screw diameter: 50 mm Injection volume: 392 cc Injection weight: 359 g Kdodpfozmg A Asx Aa Eep Complete equipment: Robot, conveyor belt, hot runner controller, etc.

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Kdedpfsv D Nxlox Aa Esp Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: good (used), Year of construction: 2000, functionality: fully functional, Mazak VTC 200 B, Year of manufacture: 2000, Control system: Mazak Mazatrol 640, Travel range X/Y/Z: 1120/510/510 mm, Table size: 1460 x 510 mm, Table load capacity: 800 kg, Tool changer: 24-position, Tool holder: SK 40, Spindle speed: up to 10,000 rpm, Coolant pressure: 15 bar, Prepared for 4th axis, Kdodpfszl R A Djx Aa Ejp 4th axis defective, Performance Package.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Cone crusher product group is designed especially for the hardest material, cone crushers are one of the best choices for crushing river gravel, basalt and granite, along with abrasive materials in the mining industry. The working principle of cone crushers is to break the material by compression, by squeezing it between its walls, which are completely covered with resistant mantle and a bowl liner. It has longer life than other crushers thanks to its long life wear parts. Model: FABO CC200 Capacity: 200-250 t/h Max. Feed opening: EC 185 mm C 145 mm MC 115 mm M 90 mm MF 75 mm F 50 mm EF 35 mm Motor: 132 kW Kdsdpfx Aaszl Ntbo Eep Head diameter: 1100 mm Dimensions (width * height): 2520* 2540 mm Countershaft Speed-rpm: 750-1200 Weight: 11230 kg * Hydroset Control * Automatic Load Protection * Practical discharge * High capacity cubic production * High-performance contactless labyrinth * High productivity, low energy production and lower wear costs, long service life and high product yield with desired fine powders. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2003, condition: ready for operation (used), A vertical CNC lathe by Emag is available. Workpiece length range: 22mm-100mm, turning length: 100mm, speed: 6500rpm, measuring length: 94mm, max. swing diameter: 220mm, tool stations: 12, weight: approx. 7000kg. Including tool setting probe, carousel workpiece transfer system, chip conveyor and coolant system. Documentation available. An on-site inspection is possible. Kodpfx Aszl Emqea Esdp

Year of construction: 2004, condition: ready for operation (used), A vertical EMAG CNC turning machine with automation is available. Speed: 6500rpm, workpiece length range: 22mm-100mm, turning length: 100mm, measuring length: 94mm, max. swing diameter: 220mm, max. pump pressure: 120bar, tool stations: 12, loading stations: 2, robot type: M-10iA, control: Fanuc 16i-TB, weight: approx. 10000kg, power-on hours: 84847h. Including high-pressure pump, tool setting probe, chip conveyor, coolant system, workpiece shuttle system and robot automation. Documentation available. An on-site inspection is possible. Kjdpfozl Enbex Aa Ejdp

Year of construction: 2004, condition: ready for operation (used), A vertical EMAG CNC lathe is available. Workpiece length range: 22mm-100mm, turning length: 100mm, max. swing diameter: 220mm, tool stations: 12, measuring length: 94mm, spindle speed: 6500rpm. Machine dimensions X/Y/Z: approx. 2400mm/3300mm/2950mm, weight: approx. 10000kg. Including tool setting probe, chip conveyor, 120bar high-pressure pump, Heilig workpiece shuttle system with two stations and coolant system. Documentation available. An on-site inspection is possible. Kdsdpfozl El Tox Aa Esp

Year of construction: 2004, condition: ready for operation (used), A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z-axis travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 51170h/53006h, Feed/Machining time 1/2: 33418h/30961h, Automatic operation hours 1/2: 14858h/14709h. Both machines are equipped with chip conveyors, 2x tool turrets, 2x loading stations, a workpiece palletizing system, robot automation and coolant system. Documentation available. An on-site inspection is possible. Kdedezl Emdjpfx Aa Eep

Year of construction: 2004, condition: ready for operation (used), A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 42668h/42411h, Feed/Machining time 1/2: 29058h/27736h, Automatic operation hours 1/2: 10354h/12404h. Both machines are equipped with chip conveyors, 2 tool turrets, 2 loading stations, a workpiece palletizing system, robot automation and cooling. Documentation available. An on-site inspection is possible. Kdsdpszl Emksfx Aa Eop

Condition: good (used), Year of construction: 2007, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW Kedpfjzlyq Dsx Aa Esdp - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE200TN7400697, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 1.931 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 335 x 117 x 175 cm CE mark: yes Kdjdpfx Asxq Uqcoa Eop Other information Fuel consumption: 34.2 Liter per Hour at 75% Load Generator: Caterpillar A2635L41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 325 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank