Used Arburg 420 for sale (326)

Condition: excellent (used), Year of construction: 2000, Screw diameter: 30 mm Clamping force: 800 kN Tie bar distance: 420 x 420 mm Prodjxzzuiepfx Adnjd Installation height: 250 mm Weight: approx. 3,800 kg

Condition: good (used), Year of construction: 1998, Arburg 420 C 800-250 Clamping force : 80 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Platen size: 570 × 570 mm Opening stroke: 500 mm Max. daylight: 750 mm Minimum mould height: 250 mm Injection unit: Shot volume : 144 cm³ Shot weight : 132 g Shot volume : 188 cm³ Shot weight : 172 g Injection pressure : 1820 bar Injection pressure : 1390 bar Machine dimensions: Length: 4.2 m Width: 1.7 m Height: 1.8 m Predpfxoxqd Tme Adned Machine weight: 3,700 kg

Condition: excellent (used), Year of construction: 2000, operating hours: 46,000 h, functionality: fully functional, machine/vehicle number: 180316, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, Fully functional plastic injection molding machine with associated documentation and diskettes. Predpfx Ajv N D Raodnod The machine operated in clean production. The machine was injection molded with LDPE material, so the tip and screw are in first-class condition. Every 2 years, the pressures were checked and confirmed by an Arburg authorized service.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Direct from mold maker: ARBURG 420 C 1000-250 VARIO – Injection unit horizontally movable Predpfxexwa A Ds Adnjd Year 2001, 43,600 operating hours, single owner, excellent condition, offered with the following specification: 35 mm screw, Tech Level 2 servo-controlled clamping unit, cooling circuits controlled via program, 1 core pull, equipment packages 1, 2, 3, 5, 6, very well-maintained machine, available for inspection under power. Without peripherals. Dryer, conveyor, color mixer, hopper by MOTAN available at extra cost if required. * Further machine: ARBURG 320 C 600-100 Year 2005, only 36,500 operating hours, single owner, excellent condition, offered with the following specification: 25 mm screw, second screw 30 mm, set-up for parting line injection, Tech Level 2 servo-controlled clamping unit, cooling circuits controlled via program, 1 core pull, equipment packages 1, 2, 3, 5, 6, very well-maintained machine, available for inspection under power. Without peripherals. Dryer, conveyor, hopper by DIGICOLOR and sprue picker by GEIGER MiniServo available at extra cost if required.

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Psdpfx Adorp Dyrenord Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 54109, if you have any questions about the machine, please contact us Pedpfxsxlhttj Adnsrd

Year of construction: 1998, condition: ready for operation (used), Five identical Arburg injection molding machines are available. Clamping force: 800kN, column distance: 420mm/420mm, installation height: 250mm, platen distance: 700mm, nozzle diameter: 45mm, weight: approx. 3800kg, control: Selogica 3.020. All machines include temperature control unit and conveyor belt. Documentation available. The machines are in storage. On-site inspection is possible. Podpoviv Dfofx Adnerd

Condition: excellent (used), Year of construction: 2014, Arburg 420C 1000-290 (2014) e2 Clamping force: 100 t Screw diameter: 25 mm Pjdpfxexdl H Io Adnerd Shot weight: 54 g Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Shot volume: 59 cm3 Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2000, Injection molding machine Arburg 420 C 1000-250 Year of manufacture 2000 Selogica control Closing zone Closing force 1000 kN Minimum mould height Column spacing 420 x 420 mm Mounting plate dimension 605 x 605mm Opening stroke of mold 500mm Maximum opening width 750mm Injection unit Screw diameter 35mm Injection weight (ps) 132g Injection volume 144cm3 Predpfxjqqkqlo Adnod Specific injection pressure 1820bar Power supply and dimensions Pump motor power 18.5 kW Heater power 6.5 kW Weight of the machine 3.18T Dimensions (L x W x H) 4.3m x 1.7m x 1.8m

Year of construction: 2003, condition: good (used), For sale is a 2 component injection molding machine brand Arburg and type 420 C The machine comes from a production where much importance is attached to maintenance and cleanliness. Likewise, the maintenance and repair are carried out there immediately by skilled personnel Arburg 420C 1000-150/60; clamping force: 1000 kN Year of construction 04/2003; screw diameter Ø25mm each installed; 9x mold heaters; 2x core pull hydraulic; 1x pneumatic valve gate; 9x temperature sensors; 1x cavity pressure sensor; Currently approx. 36,684 hours; 1x spare cylinder Ø18mm for unit 2 additionally available Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Podpfx Aolwxpiednord Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: used, Year of construction: 2006, (2006) Arburg 420 C 800-350 DUROPLAST Pedouy Sdtepfx Adnerd Clamping force: 80 ton Screw dia: 40mm Weight 3400 kg Machine used for Bakelite production (DUROPLAST)

Condition: good (used), Year of construction: 2002, Arburg 420 C 1000-250 (2002) Working hours : 115600 h Clamping force: 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Pjdpfoxqczpjx Adnord Shot weight : 100 g Machine weight : 3580 kg

Condition: good (used), Year of construction: 2000, Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Podpfoxqcrzex Adnerd Distance between tie bars : 420 x 420 Shot weight : 100 g \+ robot TECHNOMATIC

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g Psdpfxsrthkus Adnord New temperature control board ARB 777 (cost 2.750€)

Condition: good (used), Year of construction: 2001, • Clamping Force: 80 tons (800 kN) • Screw Diameter: 35 mm Psdpfx Adowgamkonjrd • Shot Weight (PS): 165 grams • Tie Bar Spacing (H × V): 420 mm × 420 mm • Opening Stroke (Max): 450 mm • Minimum Mould Height: 250 mm • Maximum Daylight (Platen Distance): 700 mm • Control System: Selogica • Power Consumption: 29.9 kW • Machine Dimensions (L × W × H): 5,200 mm × 1,600 mm × 2,200 mm • Machine Weight: 3,800 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 194573, clamping force: 1,000 kN, screw diameter: 30 mm, injection pressure: 2,500 bar, opening stroke: 500 mm, plate length: 570 mm, TECHNICAL DETAILS Prodjxx T Dwjpfx Adned Clamping force: 1,000 kN First injection unit Screw diameter: 30 mm Shot weight: 65 g Shot volume: 78 cm³ Injection pressure: 2,210 bar Second injection unit Screw diameter: 25 mm Shot weight: 45 g Shot volume: 54 cm³ Injection pressure: 2,500 bar Tie bar spacing: 420 x 420 mm Platen size: 570 x 570 mm Opening stroke: 500 mm Maximum daylight between platens: 850 mm Mold height: 350 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4.63 x 1.3 x 3.9 m Weight: 4,000 kg Connected load: 125 A EQUIPMENT 2 x core pull (simultaneous movement, adjustable holding pressure) Intermediate stop for hydraulic rotary control CF card drive Host computer interface Input device interface Conveyor belt interface Machine prepared for Multilift Selector unit with connection Installation height expanded to 350 mm Highly wear-resistant screws Connection for air blow-off device 2-color / horizontal-vertical injection unit Includes disks/CF cards – complete documentation/manuals

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Prjdpfx Asxz Awxjdnsd Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Dosage volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Year of construction: 2007, condition: ready for operation (used), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. Application Types Podpfxexy An Io Adnsrd Injection Moulding

Condition: excellent (used), Year of construction: 2006, operating hours: 95,822 h, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 188 cm³, injection pressure: 1,530 bar, injection weight: 172 g, mold height (min.): 250 mm, Arburg 420C-1000-290 injection molding machine with sorting flap Number: 239 Availability: in stock Year of production: 2006 Producer: Arburg Screw diameter [mm]: 40 Injection weight [g]: 172 Injection pressure [bar]: 1530 Closing force [kN]: 1000 Column spacing [mm]: 420x420 Psdswwi Huspfx Adnord Plate size [mm]: 570×570 Min. form height [mm]: 250 Control type: Selogica Tongue: german Installed power [kW]: 21.4 Working hours [h]: 95822 Weight [kg]: 3700 Dimensions [mm]: 4400×2000 Feed hopper: NO Robot nest: Yes Core string: Yes

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 with the Wittmann W721 robot Year of construction: 2004 Prodpfx Aoxz Awljdnod Injection unit: Screw diameter: 30 mm Injection weight: 89 g Injection pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Original mold crane Robot Wittmann W721 Year of manufacture: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-550, Y-1200, Z-1250 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 420S 800-350 Year of manufacture: 2003 Injection unit: Screw diameter: 50 mm Shot weight: 250 g Injection pressure: approx. 1300 bar Dosage volume: 288 ccm Clamping unit: Clamping force: 80 t Tie bar distance: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 interface Robot interface Air valve x 1 Core pull control Injection unit hardened - bimetallic Proportional valve on the injection unit – for precise injection Integrated original Arburg side sprue picker Dimensions: Weight: 3,800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pump/Motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW Prsdpfxexz Au Re Adned All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1999, ARBURG 420C 800-250 with the sprue picker anvil+long leg Year of manufacture: 1999 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core pull control Injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. Prsdpsxz Au Dsfx Adned It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of manufacture: 1999 injection unit: Screw diameter: 35 mm Injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 80 t Prodoxz Auqspfx Adnsd tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Euromap 12 Robot interface Core pull control injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2002, Arburg 420C 1300-675 with the sprue picker Star Year of manufacture: 2002 injection unit: Screw diameter: 50 mm injection weight: 297 g Injection pressure: 2080 bar Metering volume: 353 ccm Clamping unit: clamping force: 130 t tie bar distance: 420x420 mm size of clamping platens: 605x605 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - bimetal Type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Pjdpfx Adsxzz T Senjrd Covers from the operator side open automatically Dimensions: Weight: 4330 kg Length/width/height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1995, Arburg 420C 1000-350 Year of manufacture: 1995 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2120 bar Dosage volume: 182 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping system: hydraulic Control: DIALOGICA Additional equipment: Euromap Robot interface Hydraulic core pull X1 Dimensions: Weight: 3700 kg Length/Width/Height: 4.35x1.64x2.08 m Drive: Prodpexzz Susfx Adnod Pump/Motor: 22 kW Heating capacity: 8.6 kW Total power: 30.6 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request.