Used Arburg A 220 90 350 Art 585 for sale (350)

Year of construction: 1988, condition: good (used), hydraulic clamp vertical adapters for parting line molding capability clamp tonnage 40 ton Platen size 346 x 346 mm Distance between tie bars: 220 x 220 mm Maximum open daylight: 475 mm Mold opening stroke: 275 mm Minimum mold height: 200 mm Hydraulic ejector force: 2 ton Hydraulic ejector stroke: 100 mm Screw diameter: 22 mm Shot size: 30 gram Hnodpfobqi Tbjx Ah Njg Optional screw-shot sizes: up to 30 mm Screw stroke: 95 mm Screw volume: 36 cm³ Maximum injection pressure: 91 kN (18,200 psi) Screw speed range: 10-580 rpm (infinitely variable) Hydraulic oil required: 190 liters (50 gallons) Dry cycles: 2520 per hour Pump Motor: 11kW (15HP) Overall length x width: 3.3 x 1.1m Height w/inj unit vertical: 2.8 m Weight without oil: 1700 kgs

Condition: excellent (used), Year of construction: 1997, Arburg 220M 350-90 Year of manufacture: 1997 Hnodpfjx Ng Awox Ah Nsg Injection unit: Screw diameter: 25 mm Shot weight: 41 g Injection pressure: 1860 bar Dosage volume: 49 ccm Clamping unit: Clamping force: 35 t Tie bar distance: 221x221 mm Platen size: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MULTRONICA Additional equipment: Perfect technical condition Operating hours: 19,000 h The machine was used by a company producing packaging for the food industry Dimensions: Weight: 1,620 kg Length/Width/Height: 3.30x1.70x1.94 m Drive: Pump/Motor: 11 kW Heating capacity: 4.6 kW Total power: 15.6 kW All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in a live technical test at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1996, Arburg 220M-350-90 Clamping force: 35 tons Year of manufacture: 1996 Screw diameter: 20 mm Tie bar distance: 22x22 Hsdsx Nwi Iopfx Ah Nong

Condition: used, Year of construction: 1986, Arburg 270 - 90 - 350 Clamping force: 35 tons Hodpfx Aex I Rhush Nsng Year of manufacture: 1986 Screw diameter: 25 mm Tie bar spacing: 27x27 cm

Condition: used, Year of construction: 1985, Arburg 270 - 90 - 350 Clamping force: 35 tons Year of manufacture: 1985 Screw diameter: 22 mm Hodox I Rg Djpfx Ah Njng Tie bar distance: 27x27 cm

Condition: excellent (used), Year of construction: 1997, Arburg 270 M-350-90 U Closing 35 TO Hnedpfxeg S I S As Ah Nog year 1997 Scrow 25 mm tie bar spacing 27x27

Condition: ready for operation (used), Year of construction: 2020, Injection Unit Shot weight 172 g Screw diameter 70 mm Clamping Unit Clamping force 2200 kN This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Hjdjx Nkp Ijpfx Ah Nsng Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Hodpfx Aex Nhprsh Neng Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2006, (2006) Arburg 420 C 800-350 DUROPLAST Clamping force: 80 ton Screw dia: 40mm Hsdsuy Sdtjpfx Ah Njng Weight 3400 kg Machine used for Bakelite production (DUROPLAST)

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with side-mounted Arburg Multilift robot Hnsdpfxox Nhn Us Ah Nsg 2K (two-component) machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Year of construction: 2001, operating hours: 56,380 h, machine/vehicle number: 184172, Used injection molding machine The machine has a complete history with all important repair work and components replacement hoses etc. Manufacturer: Arburg Type: 420C 1300-350 Year of construction: 2001 Machine no. 184172 Control system: Selogica Operating hours: 56380 h constant maintenance by manufacturer clamping unit Hnedpfxsvimd Ns Ah Neg Clamping force: 1300 kN/ 130 tons Distance between tie bars: 420 x 420 mm Mold mounting platens: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Tool installation height: 250 mm Distance between platens: 750 mm max. Injection unit Injection volume: 145 ccm Injection weight: 127 g Cgu3U8W0U Screw diameter: 35 mm Injection pressure: 2500 bar Extras Hydraulic core pull - Available immediately from our warehouse in Hanover, free on delivery or free to your door against freight reimbursement - Functionally tested (guaranteed function until first commissioning)

Condition: good (used), Year of construction: 2000, operating hours: 83,000 h, clamping force: 350 kN, screw diameter: 25 mm, For sale is an injection molding machine of the Marker Arburg and the type 320S 350-60 Year of construction: 2000 Operating hours automatic: 83000 Screw diameter: 25 mm Clamping force: 350 kN Barrel length: 60 Hedpfx Ahohhuq Ae Njng On request, transport can be organized throughout Europe for an additional charge. Price incl. VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Manufacturer: ARBURG Hnodox Eitbopfx Ah Neg Model: Allrounder 270-M-500-90 Year of manufacture: 1995 Serial number: 164822 Control system: Control unit: Arburg Multronica Injection unit: Injection type: vertical injection unit Screw diameter: Ø 20 mm Clamping unit: Clamping force: 500 kN Additional equipment: Pick system: part removal system Divider chute: separating chute / selective chute Enclosure: full protective enclosure

Condition: excellent (used), Year of construction: 1999, Arburg 420S-800-350 Clamping force: 80 tons Year of manufacture: 1999 Screw diameter: 40 mm Tie bar distance: 42x42 cm Control system: S Hsdjx I N S Eopfx Ah Nong Including conveyor belts

Condition: good (used), Year of construction: 2001, Arburg 470 C 1300-350 (2001) Clamping force is 130 ton. Total weight is 5,1 ton. Screw diameter 40 mm Tie bar spacing (H) 470 mm Tie bar spacing (V) 470 mm Shot volume 182 cm³ Shot weight 153 g Hedpfxow Hdano Ah Nsng Pressure on material 2120 bar Platen length 650 mm Platen width 650 mm Robot interface Number of cores Number of heating zones Opening of the press 850 mm Working hours 130000

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Hjdpfx Ahjx Nhlms Nsng Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2000, operating hours: 46,000 h, functionality: fully functional, machine/vehicle number: 180316, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, Fully functional plastic injection molding machine with associated documentation and diskettes. The machine operated in clean production. The machine was injection molded with LDPE material, so the tip and screw are in first-class condition. Every 2 years, the pressures were checked and confirmed by an Arburg authorized service. Hjdpjv N D Raefx Ah Nong

Condition: used, Year of construction: 2004, operating hours: 55,000 h, functionality: fully functional, clamping force: 350 kN, screw diameter: 18 mm, For sale is an injection molding machine of the brand Arburg and the type 320S 350-60 with original Arburg handling The machine is fully functional and ready for immediate use Technical Data: Year of construction: 2004 Operating hours: 55,000 h Screw Ø 18 mm Clamping force: 350 kN Core pull: 1*Hydraulic Valve gate: Pneumatic Selector switch Handling: Arburg Multilift H-side removal incl. deposit conveyor belt On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Hnedpfxju Hqino Ah Nog Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 1999, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1000-350 Baujahr: 1999 Schließkraft: 100 Tonnen Holmabstand 420 x 420 mm Schnecken DN: 40 mm Dosiervolumen: 182 ccm³ Hodou E E Hlopfx Ah Neng Spritzteilgewicht 172 g/PS Steuerung: SELGOCIA Ausstattung: -Roboter, Hersteller: GEIGER, Typ: LR21, BJ 1998 -2 x Kernzug

Condition: like new (used), Year of construction: 2006, Arburg 470 C 1500-350 (2006) Working hours : only 7.113 h Clamping Force: 150 tons Tie-bar Spacing: (H × V): 470 mm × 470 mm Maximum Plate Size : 650 mm × 650 mm Minimum Mould Installation Height: 250 mm Maximum Distance between Platen (when fully open): ~750 mm Mould Opening Stroke : 500 mm Screw Diameter: 45 mm Approximate Shot Volume (Injection Volume): 230 cm³ Approximate Shot Weight (for PS): 210 g Hnsdoxqx H Iepfx Ah Njg Injection Pressure: 1 670 bar Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power Heating Power: Example listing ~ 10.2 kW Machine Dimensions (Length × Width × Height): 5.4 m × 2.0 m × 2.2 m Machine Weight:4 500 kg

Condition: excellent (used), Year of construction: 1995, Arburg 420C 1000-350 Year of construction: 1995 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Injection pressure: 2120 bar Metering volume: 182 ccm Clamping unit: Clamping force: 100 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Hodpfx Aex Nhlajh Nsng Control system: DIALOGICA Additional equipment: Euromap Robot interface Hydraulic core puller X 1 Dimensions: Weight: 3700 kg Length/width/height: 4.35x1.64x2.08m Drive: Pump/motor: 22 kW Heating output: 8.6 kW Total output: 30.6 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 350 kN, screw diameter: 25 mm, For sale is an injection molding machine of the brand Arburg and the type 320S 350-60 The machine is fully functional and ready for immediate use Technical data Year of manufacture: 2005 Operating hours: 70,000 Screw Ø 25 mm Clamping force: 350 kN Valve gate: Pneumatic Hodpfx Asu Hqiush Njng Core pull: 1*Hydraulic Internal pressure transducer Selector switch On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2003, Arburg 420S 800-350 Year of manufacture: 2003 Injection unit: Screw diameter: 50 mm Shot weight: 250 g Injection pressure: approx. 1300 bar Dosage volume: 288 ccm Clamping unit: Clamping force: 80 t Tie bar distance: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 interface Robot interface Air valve x 1 Core pull control Injection unit hardened - bimetallic Proportional valve on the injection unit – for precise injection Integrated original Arburg side sprue picker Dimensions: Weight: 3,800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pump/Motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request Hjdpfox Ng Sljx Ah Nong

Condition: good (used), Year of construction: 2000, operating hours: 59,358 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, For sale is an injection molding machine of the brand Arburg and the type 370 Selectra 800-350 The machine is well maintained and fully functional Hnodpfx Aerywlqoh Neg SD card drive retrofitted Video available soon Technical data Year of construction: 2000 Clamping force: 800 kN Control system: Logica Screw diameter: 35 mm Pumping hours: 69544 h Automatic operation: 59358 h On request, for an extra charge, the machine can be delivered throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), machine/vehicle number: 181825, clamping force: 800 kN, For sale is an injection moulding machine from Arburg, model Allrounder 370 S 800-350. The machine is in good condition. Technical Data: Arburg Allrounder 370 S 800-350 Injection Moulding Machine - Operating hours: - Machine cycles: 8,011,944 - Pump: 69,544 h - Automatic operation: 59,358 h - Clamping force: 800 kN (approx. 80 tons) - Tie bar spacing (H x V): 370 mm x 370 mm (clearance between tie bars) - Mounting platen dimensions (H x V): 545 mm x 545 mm - Maximum opening stroke: 500 mm (variable) - Minimum mould height: Min. 250 mm, partially also min. 200 mm depending on configuration - Maximum daylight: Max. approx. 650 mm−750 mm, depending on minimum mould height - Ejector force: Typically approx. 35 kN Hnedpfx Ahjxt E Tye Njg Transport and loading can be organised Europe-wide for an additional fee upon request. Prices are exclusive of VAT. Viewing is possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.